Materials - McMaster Experts

subject area of

"Green" coatings protect magnesium auto parts Academic Article
“Equidistant Method” to Estimate Thermodynamic Properties of Multicomponent Solutions by Using Data on Binary Boundary Systems Academic Article
1-Methyl-2-(anthryl)-imidazo[4,5-f][1,10]-phenanthroline: A Highly Efficient Electron-Transport Compound and a Bright Blue-Light Emitter for Electroluminescent Devices Academic Article
2022 American Society of Clinical Oncology (ASCO) Genitourinary Cancers Symposium: Meeting highlights Academic Article
2D and 3D Visualization of Ductile Fracture Academic Article
2D and 3D characterization of pore defects in die cast AM60 Academic Article
3-D High-Density Strain Mapping Procedure Based on High-Resolution CT Conference Paper
3-D granular modeling and in situ X-ray tomographic imaging: A comparative study of hot tearing formation and semi-solid deformation in Al–Cu alloys Academic Article
3-D multi-scale modeling of deformation within the weld mushy zone Academic Article
3D Meso-Scale Modeling of Solidification for Aluminum-Alloy Welding Academic Article
3D multi-scale multi-physics modelling of hot cracking in welding Academic Article
4D X-ray tomography characterization of void nucleation and growth during deformation of strontium-added AZ31 alloys Academic Article
4D synchrotron X-ray tomographic quantification of the transition from cellular to dendrite growth during directional solidification Academic Article
Ex Situ ²³Na Solid-State NMR Reveals the Local Na-Ion Distribution in Carbon-Coated Na₂FePO₄F during Electrochemical Cycling Academic Article
⁶Li NMR Studies of Cation Disorder and Transition Metal Ordering in Li[Ni_1/3Mn_1/3Co_1/3]O₂ Using Ultrafast Magic Angle Spinning Academic Article
A 3-D coupled hydromechanical granular model for simulating the constitutive behavior of metallic alloys during solidification Academic Article
A Combined Numerical–Experimental Approach to Quantify the Thermal Contraction of A356 During Solidification Academic Article
A Comparative Study of Formability of Diode Laser Welds in DP980 and HSLA Steels Academic Article
A Comparison of Ferrite Growth Kinetics under Denitriding and Decarburizing Conditions Conference Paper
A Coupled Recovery/Recrystallisation Model for Zirconium Alloys. Influence of Hydrogen Conference Paper
A Crystal Plasticity Formulation for Simulating the Formability of a Transformation Induced Plasticity Steel Academic Article
A Dislocation Density Based Constitutive Model for Cyclic Deformation Academic Article
A KMnF3 perovskite structure with improved stability, low bandgap and high transport properties Academic Article
A MEAN FIELD DESCRIPTION OF THE KINETICS OF PRECIPITATE FREE ZONE FORMATION Academic Article
A Methodology to Select Polymers for Creep Application Academic Article
A Model for the Prediction of Microstructure and Mechanical Properties in Cold Rolled and Annealed TRIP Steels Conference Paper
A Molecular Dynamics Simulation Study of the Cavitation Pressure in Liquid Al Conference Paper
A New Non-PRM Bumping Process by Electroplating on Si Die for Three Dimensional Packaging Academic Article
A New Route to Monolithic Methylsilsesquioxanes: Gelation Behavior of Methyltrimethoxysilane and Morphology of Resulting Methylsilsesquioxanes under One-Step and Two-Step Processing Academic Article
A New Technique for Severe Plastic Deformation: The ConeâCone Method Academic Article
A Novel Approach to Model Static Recrystallization of Austenite During Hot Rolling of Nb Microalloyed Steel. Part I: Precipitate-Free Case Academic Article
A Novel Strong and Ductile TWIP/Martensite Steel Composite Academic Article
A Positron Annihilation Study of Defects in ZnO and Their Relation to Luminescence Centers Conference Paper
A Promising Thermoelectric Material: Zn₄Sb₃ or Zn₆_-_δSb₅. Its Composition, Structure, Stability, and Polymorphs. Structure and Stability of Zn₁_-_δSb Academic Article
A Review of Design and Fabrication Methods for Nanoparticle Network Hydrogels for Biomedical, Environmental, and Industrial Applications Academic Article
A Review of Slag Refining of Crude Silicon Academic Article
A Review of Slag Refining of Silicon Alloys Academic Article
A STUDY OF PORE GROWTH IN GLASSY-CARBON USING SMALL-ANGLE X-RAY-SCATTERING Conference Paper
A Search for Low-Irreversible Capacity and High-Reversible Capacity Positive Electrode Materials in the Li–Ni–Mn–Co Pseudoquaternary System Academic Article
A Study of Epithermal Positron Emission from Metallic Surfaces Conference Paper
A Suitable Criterion for Precise Determination of Incipient Necking in Sheet Materials Conference Paper
A THERMODYNAMIC EVALUATION OF THE FE-NB SYSTEM Academic Article
A Transmission Electron Microscope Study of Hardness Indentations in MoSi₂ Academic Article
A Treatment of Inelastic Deformation Around a Crack Tip due to Microcracking Academic Article
A Vertex Simulation of Grain Growth in 2D and 3D Academic Article
A characteristic length for stress transfer in the nanostructure of biological composites Academic Article
A combined experimental and computational analysis of failure mechanisms in open-hole cross-ply laminates under flexural loading Academic Article
A combined experimental-analytical modeling study of the artificial aging response of Al–Mg–Si alloys Academic Article
A comparative analysis of the phonon properties in UO2 using the Boltzmann transport equation coupled with DFT + U and empirical potentials Academic Article
A comparative study of fatigue properties of two face-centered-cubic metals Conference Paper
A comparative study of precipitate composition and volume fraction in an AlZnMg alloy using tomographic atom probe and small-angle X-ray scattering Academic Article
A comparative study of the volume stability of C–S–H (I) and Portland cement paste in aqueous salt solutions Academic Article
A comprehensive collection of solid-state 31P NMR spectra of aluminophosphate zeolites Academic Article
A comprehensive evaluation of non-isothermal simultaneous reduction and carburization kinetics of W-Ni oxide nano-composite powder Academic Article
A comprehensive insight into the superelasticity measurement of laser welded NiTi shape memory alloys Academic Article
A comprehensive molecular dynamics study of low-angle grain boundary mobility in a pure aluminum system Academic Article
A computational multiscale model for anisotropic failure of sheet molding compound composites Academic Article
A constitutive model for quasicrystal plasticity Academic Article
A constitutive model of twin nucleation, propagation and growth in magnesium crystals Academic Article
A constitutive model of twinning and detwinning for hexagonal close packed polycrystals Academic Article
A criterion for ductile failure in age-hardenable aluminum alloys Academic Article
A crystallographically consistent optimization of the Zn–Fe system Academic Article
A deformation-based model for recrystallization of anisotropic materials Academic Article
A dislocation based analysis of continuum mechanical and microscopic local stresses during cyclic deformation of copper Academic Article
A dislocation-based model for all hardening stages in large strain deformation Academic Article
A dynamic recrystallisation criterion: DRX map Academic Article
A full thermodynamic optimization of the Zn–Fe–Al system within the 420–500 ∘C temperature range Academic Article
A geometric model correctly reproducing both the regular term and the configurational entropy of a ternary solution Academic Article
A heuristic method to uncover a possible unsoundness of a physical–chemical model Academic Article
A macro- and micromechanics investigation of hot cracking in duplex steels Academic Article
A macro–micro-multi-level modeling scheme to study the effect of particle distribution on wrap-bendability of AA5754 sheet alloys Academic Article
A mathematical peculiarity of the SGTE method to describe lattice stabilities Academic Article
A mechanism for spontaneous relaxation of glass at room temperature Academic Article
A mesoscale solidification simulation of fusion welding in aluminum–magnesium–silicon alloys Academic Article
A mesoscopic approach for predicting sheet metal formability Academic Article
A metallography solution for grain boundary diffusion estimation in polycrystals Academic Article
A method for determining r-value of aluminum sheets with the Portevin-Le Chatelier effect Academic Article
A model for damage coalescence in heterogeneous multi-phase materials Academic Article
A model for damage in a clustered particulate composite Academic Article
A model for predicting fracture mode and toughness in 7000 series aluminium alloys Academic Article
A model for the competition of precipitation and recrystallization in deformed austenite Academic Article
A model for the effect of creep deformation and intrinsic growth stress on oxide/nitride scale growth rates with application to the nitridation of γ-TiAl Academic Article
A model for the grain size dependent work hardening of copper Academic Article
A model for the growth of solute clusters based on vacancy trapping Academic Article
A model for the mechanical behaviour of highly concentrated composites Academic Article
A model for viscous flow creep in ceramics containing secondary crystalline phases Academic Article
A molecular dynamics simulation of (110) surface premelting in Ni Academic Article
A molecular dynamics simulation study of the velocities, mobility and activation energy of an austenite–ferrite interface in pure Fe Academic Article
A molecular dynamics study of heterogeneous nucleation at grain boundaries during solid-state phase transformations Academic Article
A nanometre-sized porous phase in iron–carbon–boron system Academic Article
A neutron diffraction study of stoichiometric and reduced LaCr0.6Ni0.4O3 Academic Article
A new CFRP anchor for preventing separation of externally bonded laminates from concrete Academic Article
A new consideration on reinforcement distribution in the different planes of nanostructured metal matrix composite sheets prepared by accumulative roll bonding (ARB) Academic Article
A new crystal plasticity framework to simulate the large strain behaviour of aluminum alloys at warm temperatures Academic Article
A new empirical equation for termination of twinning in magnesium alloys Academic Article
A new hybrid process for surface modification by combining brush plating with nitrocarburizing Academic Article
A new mean field micromechanical approach to capture grain size effects Conference Paper
A new method of determining forming limit diagram for sheet materials by gas blow forming Academic Article
A new methodology for measurement of semi-solid constitutive behavior and its application to examination of as-cast porosity and hot tearing in aluminum alloys Academic Article
A new strain hardening model for rate-dependent crystal plasticity Academic Article
A nonlinear model for predicting intermediate crack-induced debonding in FRP-retrofitted beams in flexure Academic Article
A note on grain size dependent pinning Academic Article
A note on the deformation behaviour of two-dimensional model cellular structures Academic Article
A novel approach to cutting tool edge design based on initial wear stage Academic Article
A novel approach to producing architectured ultra-high strength dual phase steels Academic Article
A novel eutectic Fe-15 wt.% Ti alloy with an ultrafine lamellar structure for high temperature applications Academic Article
A novel experimental approach to identifying kinetic transitions in solid state phase transformations Academic Article
A numerical study on the compressive and rotational behavior of fiber reinforced elastomeric isolators (FREI) Academic Article
A perturbation solution for ternary diffusion with a variable diffusivity matrix Academic Article
A physical approach to the toughness problem: From thermodynamics to kinetics—I. The homogeneous case Academic Article
A physical approach to the toughness problem: From thermodynamics to kinetics—II. The heterogeneous case Academic Article
A physical model of the twinning-induced plasticity effect in a high manganese austenitic steel Conference Paper
A physically based model for TRIP-aided carbon steels behaviour Academic Article
A quantitative modeling of the unloading behavior of metals during a tensile test Academic Article
A quantitative multi-phase field model of polycrystalline alloy solidification Academic Article
A quantitative study on mechanical behavior of Mg alloys with bimodal texture components Academic Article
A reformulation of mechanism-based strain gradient plasticity Conference Paper
A remark on the configurational entropy of a liquid solution with a weak tendency to association Academic Article
A review on the laser welding of coated 22MnB5 press-hardened steel and its impact on the production of tailor-welded blanks Academic Article
A rigorous proof of the Alkemade theorem Academic Article
A self-consistent approach to modeling strain gradient plasticity Academic Article
A self-consistent treatment of precipitate growth via ledge migration in the presence of interfacial dissipation Academic Article
A simple model describing roping in A1 sheet Academic Article
A solute drag treatment of the effects of alloying elements on the rate of the proeutectoid ferrite transformation in steels Academic Article
A spring-block model for Barkhausen noise Academic Article
A stabilized, high stress self-biasing shape memory alloy actuator Academic Article
A stochastic model for dislocation density evolution Academic Article
A structure investigation of epitaxial Fe–Pt multilayers Academic Article
A study of grain boundaries in a binderless cemented carbide Academic Article
A study of particle size effect and interface fracture in aluminum alloy composite via an extended conventional theory of mechanism-based strain-gradient plasticity Academic Article
A study of the carbon distribution in retained austenite Academic Article
A study of the effect of initial grain size and strain rate on dislocation structures in copper Academic Article
A study of transient liquid-phase bonding of Ag-Cu using differential scanning calorimetry Academic Article
A study on heat affected zone softening in resistance spot welded dual phase steel by nanoindentation Academic Article
A systematic study of grain refinement during impact of 4340 steel Academic Article
A technique for rapid characterization of intermetallics and interfaces Academic Article
A test of a phenomenological model of size dependent melting in Au nanoparticles Academic Article
A three-phase simulation of the effect of microstructural features on semi-solid tensile deformation Academic Article
A transition from local equilibrium to paraequilibrium kinetics for ferrite growth in Fe–C–Mn: A possible role of interfacial segregation Academic Article
A two-step Monte Carlo method for wetting on heterogeneous surfaces Academic Article
AC electrical properties as a sensor of the microstructural evolution in nanocomposite materials: experiment and simulation Conference Paper
ALEMI: A Ten-Year History of Discussions of Alloying-Element Interactions with Migrating Interfaces Conference Paper
ANIUTA WINTER-KLEIN PRIZE Academic Article
ATTACK OF MAGNESITE REFRACTORIES BY ALUMINA-CONTAINING SLAGS Academic Article
Accounting for the microstructure in the prediction of the fatigue life of injection moulded composites for automotive applications Academic Article
Achieving homogeneity in a high-Fe β-Ti alloy laser-printed from blended elemental powders Academic Article
Achieving ultra-high strength using densely ultra-fine LPSO phase Academic Article
Acta Materialia Acta Metallurgica et Materialia Journal
Acta Metallurgica Sinica (English Letters) Journal
Addendum Academic Article
Addendum to: “Atomistic investigation of clustering phenomenon in the Al–Cu system: Three-dimensional phase-field crystal simulation and HRTEM/HRSTEM characterization” [Acta Mater. 61 (2013) 6372–6386] Academic Article
Adsorbent prepared from sewage sludge by chemical activation and its application to sulfur dioxide adsorption Academic Article
Advanced Engineering Materials Journal
Advanced Functional Materials Advanced Materials for Optics and Electronics Journal
Advanced Materials and Processes Journal
Advances in sheet metal forming analyses: dealing with mechanical anisotropy from crystallographic texture Academic Article
Al 5083/SiCp composites produced by continual annealing and roll-bonding Academic Article
Al/Ni metal intermetallic composite produced by accumulative roll bonding and reaction annealing Academic Article
Al3+ ion conducting behavior in single crystal of aluminum tungstate–scandium tungstate solid solution Academic Article
All but diamonds – Biological materials are not forever Academic Article
Alloy development and reheating process exploration of Al–Si casting alloys with globular grains for thixoforming Academic Article
American Society of Mechanical Engineers, Materials Division (Publication) MD Journal
Amorphous Fe1−xCx coatings as carbon reservoirs for diffusion strengthening of steel sheets Academic Article
Amorphous phase formation in spray deposited AlYNiCo and AlYNiCoZr alloys Conference Paper
An Electrostatic Beam System for Positron-Annihilation-Induced Auger Electron Spectroscopy Conference Paper
An Experimental Study of Transient Liquid Phase Bonding of the Ternary Ag-Au-Cu System Using Differential Scanning Calorimetry Academic Article
An Innovative Two-Stage Reheating Process for Wrought Aluminum Alloy During Thixoforming Academic Article
An X-ray Spectromicroscopy Study of Albumin Adsorption to Crosslinked Polyethylene Oxide Films Academic Article
An analysis of microhardness of single-quasicrystals in the Al–Cu–Co–Si system Academic Article
An analytical description of the mechanical hysteresis of entangled materials during loading–unloading in uniaxial compression Academic Article
An analytical study of the plasticity of sandwich honeycomb panels subjected to low-velocity impact Academic Article
An angular embedded atom method interatomic potential for the aluminum–silicon system Academic Article
An approach to define the effective lath size controlling yield strength of bainite Academic Article
An approach to materials processing and selection for high-field magnet design Academic Article
An atom probe tomography study of internal oxidation processes in Alloy 600 Academic Article
An atomistic simulation study of the crystallographic orientation relationships during the austenite to ferrite transformation in pure Fe Academic Article
An atomistic simulation study of the migration of an austenite–ferrite interface in pure Fe Academic Article
An efficient full-field crystal plasticity-based M–K framework to study the effect of 3D microstructural features on the formability of polycrystalline materials Academic Article
An electron microscopy study of dislocation structures in Mg single crystals compressed along [0 0 0 1] at room temperature Academic Article
An embedded atom method interatomic potential for the Cu Pb system Academic Article
An embedded-atom method interatomic potential for Pd–H alloys Academic Article
An evaluation of available data for strain-enhanced grain growth during superplastic flow Academic Article
An examination of the formation of adiabatic shear bands in AISI 4340 steel through analysis of grains and grain deformation Academic Article
An excursion into the design space of biomimetic architectured biphasic actuators Academic Article
An experimental investigation on the bond behavior of steel reinforced polymers on concrete substrate Academic Article
An extension of the Kocks–Mecking model of work hardening to include kinematic hardening and its application to solutes in ferrite Academic Article
An integrated computational materials engineering framework to analyze the failure behaviors of carbon fiber reinforced polymer composites for lightweight vehicle applications Academic Article
An integrative approach to coating/carbide substrate design of CVD and PVD coated cutting tools during the machining of austenitic stainless steel Academic Article
Analysis of Mn Effect on Recrystallization Kinetics in High Nb Steels Conference Paper
Analysis of Surface Roughening in AA6111 Automotive Sheet Under Pure Bending Academic Article
Analysis of first order kinetics for tertiary creep in AISI 304 stainless steel Academic Article
Analysis of high-temperature creep deformation in a polycrystalline nickel-base superalloy Conference Paper
Analysis of impact toughness scatter in simulated coarse-grained HAZ of E550 grade offshore engineering steel from the aspect of crystallographic structure Academic Article
Analysis of particle induced dislocation structures using three-dimensional dislocation dynamics and strain gradient plasticity Conference Paper
Analysis of precipitation, dissolution and incipient melting of Al2Cu in B206 Al alloy using in-situ neutron diffraction Academic Article
Analysis of ridging in ferritic stainless steel sheet Academic Article
Analysis of roping in AA6111 automotive sheet Academic Article
Analysis of roping in an AA6111 T4P automotive sheet in 3D deformation states Academic Article
Analysis of surface roughening in AA6111 automotive sheet Academic Article
Analysis of the Fe–Zn interface of galvanized high Al–low Si TRIP steels Academic Article
Analysis on representative chemical compositions of urban acid precipitation Academic Article
Analytical Model of the Unbending Behavior of Corrugated Reinforcements Academic Article
Analytical electron microscopy of aluminium alloys Academic Article
Analytical estimation of distance–disorientation function of the material microstructure Academic Article
Analytical expressions of incompatibility stresses at Σ3⟨111⟩ twin boundaries and consequences on single-slip promotion parallel to twin plane Academic Article
Analytical modeling of isothermal solidification during transient liquid phase (TLP) bonding Academic Article
Anelastic Behavior Modeling of SiC Whisker-Reinforced Al₂O₃ Academic Article
Anisotropic meanfield modeling of debonding and matrix damage in SMC composites Academic Article
Anisotropic trivalent ion conducting behavior in single crystals of aluminum tungstate-scandium tungstate solid solution Academic Article
Anisotropic wetting surfaces machined by diamond tool with tips microstructured by focused ion beam Thesis
Anisotropy of Mechanical Properties in 7010 Aluminium Thick Plates Conference Paper
Annealing and aging of interstitial C in α-Fe, As measured by internal friction Academic Article
Annealing of silicon carbonitride nanostructured thin films: interdependency of hydrogen content, optical, and structural properties Academic Article
Annual Review of Materials Research Annual Review of Materials Science Journal
Anomalous strain hardening behaviour of a supersaturated Al-Zn-Mg alloy Conference Paper
Applicability of 2NN-MEAM potentials in the prediction of temperature and oxygen-dependent elastic properties of titanium Academic Article
Application of Microstructure Sensitive Design to FCC Polycrystals Academic Article
Application of Microstructure Sensitive Design to FCC Polycrystals Conference Paper
Application of a Pore Fraction Hot Tearing Model to Directionally Solidified and Direct Chill Cast Aluminum Alloys Academic Article
Application of electrophoretic and electrolytic deposition techniques in ceramics processing Academic Article
Application of electrophoretic and electrolytic deposition techniques in ceramics processing - Part 2 Academic Article
Application of electrophoretic and electrolytic deposition techniques in ceramics processing* - Part 1 Academic Article
Application of foil electrodes for electro-erosion edge honing of complex-shaped carbide inserts Academic Article
Application of land productivity model for land use programming in hilly loess region Academic Article
Application of the VPSC Model to the Description of the Stress–Strain Response and Texture Evolution in AZ31 Mg for Various Strain Paths Academic Article
Application of uncertainty theory to prediction and assessment of water quality in Three-Gorge Reservoir Academic Article
Applications of remote sensing for inland water quality Academic Article
Applied Composite Materials Journal
Aqueous electrophoretic deposition of drugs using bile acids as solubilizing, charging and film-forming agents Academic Article
Architectured materials: Expanding materials space Academic Article
Architecturing of Metal-Based Composites with Concurrent Nanostructuring: A New Paradigm of Materials Design Academic Article
Artificial Solids by Design: Assembly and Electron Microscopy Study of Nanosheet-Derived Heterostructures Academic Article
As-Cast Residual Stresses in an Aluminum Alloy AA6063 Billet: Neutron Diffraction Measurements and Finite Element Modeling Academic Article
Aspects of the Shi–Seinfeld–Okuyama theory of transient nucleation Academic Article
Aspects of the plastic deformation in glassy polymer blends Conference Paper
Assessment of Hydrogen Uptake and Permeation in AHSSs Academic Article
Assessment of Phase Transformations in Binary Fe–Mn Alloys: Effects of Composition and of Plastic Strain Academic Article
Atom probe tomography and numerical study of austenite stabilization in a low carbon low alloy steel processed by two-step intercritical heat treatment Academic Article
Atomic Resolution Coordination Mapping in Ca₂FeCoO₅ Brownmillerite by Spatially Resolved Electron Energy-Loss Spectroscopy Academic Article
Atomic force microscope study of crater formation in ion bombarded polymer Academic Article
Atomic structure of T1 precipitates in Al–Li–Cu alloys revisited with HAADF-STEM imaging and small-angle X-ray scattering Academic Article
Atomic-scale Investigation of Liquid-Metal-Embrittlement Crack-path: Revealing Mechanism and Role of Grain Boundary Chemistry Academic Article
Atomic-scale pathway of early-stage precipitation in Al–Mg–Si alloys Academic Article
Atomic-scale simulation study of equilibrium solute adsorption at alloy solid-liquid interfaces Academic Article
Atomic-scale study of dislocation glide in a model solid solution Academic Article
Atomistic Modeling of Solidification Phenomena Using the Phase-Field-Crystal Model Academic Article
Atomistic investigation of clustering phenomenon in the Al–Cu system: Three-dimensional phase-field crystal simulation and HRTEM/HRSTEM characterization Academic Article
Atomistic simulation methods for computing the kinetic coefficient in solid-liquid systems Academic Article
Atomistic simulation of the step mobility at the Al–Si(1 1 1) crystal–melt interface using molecular dynamics Academic Article
Atomistic simulation study of the hydrogen diffusion in nickel Academic Article
Atomistic simulations of grain and interphase boundary mobility Academic Article
Atomistic simulations of reactive wetting in metallic systems Conference Paper
Atomistic simulations of the decomposition kinetics in Fe–Cr alloys: Influence of magnetism Academic Article
Atoms to autos: A multi-scale approach to modeling aluminum deformation Academic Article
Austenite Grain Growth in High Manganese Steels Academic Article
Authors’ reply Academic Article
Authors’ reply to reply of discussion on “nucleation mechanism of eutectic phases in aluminum-silicon hypoeutectic alloys” Academic Article
Avalanche dynamics in crumpled aluminum thin foils Academic Article
BOF SLAG-INDUCED FORMATION AND DESTRUCTION OF DENSE MGO LAYERS IN CARBON-CONTAINING MAGNESITES Academic Article
Ba₃NbFe₃Si₂O₁₄: A New Multiferroic with a 2D Triangular Fe³⁺ Motif Academic Article
BaBiBO4, a novel non-centrosymmetric borate oxide Academic Article
Bainite tip radius prediction by analogy with indentation Academic Article
Base-Catalyzed Ship-in-a-Bottle Synthesis of a Prefluorescent, Zeolite-Incorporated Sensor for Monitoring Radical Processes in Zeolites Academic Article
Basic aspects of the co-deformation of bcc/fcc materials Academic Article
Bauschinger Effect or Kinematic Hardening: Bridging Microstructure and Continuum Mechanics Academic Article
Bench-Top Fabrication of Hierarchically Structured High-Surface-Area Electrodes Academic Article
Bendability enhancement of an age-hardenable aluminum alloy: Part I — relationship between microstructure, plastic deformation and fracture Academic Article
Bendability enhancement of an age-hardenable aluminum alloy: Part II — multiscale numerical modeling of shear banding and fracture Academic Article
Bending in aluminium alloys AA 6111 and AA 5754 using the cantilever bend test Academic Article
Bending properties of functionally graded 300M steels Academic Article
Benefits of Recovery and Partial Recrystallization of Nano-Twinned Austenitic Steels Academic Article
Benzodithiophene Copolymer-A Low-Temperature, Solution-Processed High-Performance Semiconductor for Thin-Film Transistors Academic Article
Bioceramic materials with controlled porosity for bone implant applications Academic Article
Biodegradation and Debonding Detection of Composite-wrapped Wood Structures Academic Article
Biodegradation: Magneto-Thermal Metrics Can Mirror the Long-Term Intracellular Fate of Magneto-Plasmonic Nanohybrids and Reveal the Remarkable Shielding Effect of Gold (Adv. Funct. Mater. 9/2017) Academic Article
Bioinspired Blood Compatible Surface Having Combined Fibrinolytic and Vascular Endothelium-Like Properties via a Sequential Coimmobilization Strategy Academic Article
Bioinspired polyurethane structures with interfacial fluidity for improved impact attenuation Academic Article
Biological cell detachment kinetics from an inert substrate Conference Paper
Biologically based aerobic composting theoretical model Academic Article
Black titanium dioxide nanomaterials for photocatalytic removal of pollutants: A review Academic Article
Blast loading response of reinforced concrete panels reinforced with externally bonded GFRP laminates Academic Article
Bond strength evaluation of roll bonded bi-layer copper alloy strips in different rolling conditions Academic Article
Bond strength optimization of Ti/Cu/Ti clad composites produced by roll-bonding Academic Article
Bonded versus unbonded strip fiber reinforced elastomeric isolators: Finite element analysis Academic Article
Bonding Mechanisms in Resistance Microwelding of 316 Low-Carbon Vacuum Melted Stainless Steel Wires Academic Article
Bonding NiTi to glass with femtosecond laser pulses Academic Article
Bonding mechanism in ultrasonic gold ball bonds on copper substrate Conference Paper
Bonding mechanism of ultrasonic wedge bonding of copper wire on Au/Ni/Cu substrate Academic Article
Bonding of immiscible Mg and Fe via a nanoscale Fe2Al5 transition layer Academic Article
Brazing of reaction-bonded silicon carbide and Inconel 600 with an iron-based alloy Academic Article
Bridging-Stress Evaluation in a Ni/Al2O3 System via the Digital Image-Correlation Technique Academic Article
British Ceramic Transactions Advances in Applied Ceramics Journal
Broken Band Alignment in EuS-CdS Nanoheterostructures Academic Article
Bulk Studies of Defects in Semiconductors Conference Paper
Bulk and high-energy ball-milled Gd5Si2Ge2: Comparative study of magnetic and magnetocaloric properties Academic Article
Bulk metallic glasses: what are they good for? Conference Paper
Bulletin of Materials Science Journal
Bulletin of the American Ceramic Society Journal
C?S?H (I)?A Nanostructural Model for the Removal of Water from Hydrated Cement Paste? Academic Article
COMPUTERIZED MATERIALS CONTROL FOR JOB SHOP WIRE MILLS Academic Article
CORRECTION Academic Article
CORROSION OF ALUMINOSILICATE REFRACTORIES IN IRON-MANGANESE ALLOYS. Academic Article
CRACK-PARTICLE INTERACTIONS IN BRITTLE COMPOSITES Conference Paper
CVD Technique for Inco Nickel Foam Production Academic Article
Calculation of energy of low-angle grain boundaries Academic Article
Calculation of stress in atomistic simulation Conference Paper
Calphad: Computer Coupling of Phase Diagrams and Thermochemistry Journal
Canadian Ceramics Journal
Capacitive behaviour of polypyrrole films prepared on stainless steel substrates by electropolymerization Academic Article
Capacitive behaviour of polypyrrole, prepared by electrochemical and chemical methods Academic Article
Carbon microalloying effect of base material on variant selection in coarse grained heat affected zone of X80 pipeline steel Academic Article
Carbon nanotubular structures synthesis by means of ultraviolet laser ablation Academic Article
Carbothermal Synthesis of Aluminum Nitride Using Sucrose Academic Article
Casting defects in low-pressure die-cast aluminum alloy wheels Academic Article
Casting of aluminum-based wrought alloys using controlled diffusion solidification Academic Article
Catalyst Free Silicone Sealants That Cure Underwater Academic Article
Cathode Characterization with Steel and Copper Collector Bars in an Electrolytic Cell Academic Article
Cathodic electrodeposition of Ag-doped manganese dioxide films for electrodes of electrochemical supercapacitors Academic Article
Cathodic electrodeposition of cobalt oxide films using polyelectrolytes Academic Article
Cathodic electrophoretic deposition of diamond particles Academic Article
Cathodic electrosynthesis of PZT films Academic Article
Cathodic electrosynthesis of ceramic deposits Academic Article
Cathodic electrosynthesis of titania films and powders Academic Article
Cathodic electrosynthesis of titanium and ruthenium oxides Academic Article
Cell Interactions with PDMS Surfaces Modified with Cell Adhesion Peptides Using a Generic Method Conference Paper
Cellulose nanofiber thin-films as transparent and durable flexible substrates for electronic devices Academic Article
Ceramic Coatings for High Temperature Corrosion Resistance by Laser Processing Academic Article
Ceramic fuel cells: A century of research Academic Article
Ceramics International Journal
Challenges in 2005 Academic Article
Challenges in materials and process selection Academic Article
Challenges in the Development of Aluminium-Based Bulk Amorphous Alloys Academic Article
Characterisation of Niobium Carbide and Carbonitride Evolution within Ferrite: Contribution of Transmission Electron Microscopy and Advanced Associated Techniques Conference Paper
Characterisation of hot tearing in Al cast alloys: methodology and procedures Academic Article
Characterisation of precipitation microstructures in aluminium alloys 7040 and 7050 and their relationship to mechanical behaviour Academic Article
Characteristics of ultraviolet-assisted pulsed-laser-deposited Y₂O₃ thin films Academic Article
Characterization and Modeling of Precipitation Kinetics in a Fe-Si-Ti Alloy Academic Article
Characterization and modeling of mechanical behavior of quenching and partitioning steels Academic Article
Characterization and modeling of precipitation kinetics in an Al–Zn–Mg alloy Academic Article
Characterization and modeling of void nucleation by interface decohesion in dual phase steels Academic Article
Characterization of Aluminum Coatings Formed on Porous Ferritic Stainless Steels by Pack Cementation Academic Article
Characterization of Bendability in Automotive Aluminum Alloy Sheets Conference Paper
Characterization of Magnesium Automotive Components Produced by Super-Vacuum Die Casting Process Conference Paper
Characterization of Magnetic Properties of Nanocrystalline Ni and Ni-15%Fe Alloy Conference Paper
Characterization of Ni plaque based polypyrrole electrodes prepared by pulseelectropolymerization Academic Article
Characterization of Radiation- Induced Defects in ZnO Probed by Positron Annihilation Spectroscopy Conference Paper
Characterization of Strain Induced Precipitation of Nb in Microalloyed Austenite Using Classical and Novel Techniques Conference Paper
Characterization of Thermal Contact Resistance in Metal Micro-Textured Thermal Interface Materials Using Electrical Contact Resistance Measurements Academic Article
Characterization of a titanium diboride particulate-reinforced aluminium composite produced by anin situ reaction technique Academic Article
Characterization of dislocation structures and internai stresses in Al-Mg alloys during recovery by synchrotron radiation Conference Paper
Characterization of graphite-aluminium composites using analytical electron microscopy Academic Article
Characterization of high purity hydrothermal magnesite deposits for refractory manufacturing Academic Article
Characterization of late-stage equiaxed solidification of alloys Academic Article
Characterization of nano-sized precipitation and dislocations and the correlation with mechanical properties of a low alloy TRIP-aided steel Academic Article
Characterization of oxide layer and micro-crack initiation in alloy 316L stainless steel after 20,000 h exposure to supercritical water at 500 °C Academic Article
Characterization of oxide scales grown on alloy 310S stainless steel after long term exposure to supercritical water at 500 °C Academic Article
Characterization of the Isothermal Precipitation Kinetics of an Al-Zn-Mg-Cu Alloy Academic Article
Characterization of the damage in nanocomposite materials by ac electrical properties: experiment and simulation Academic Article
Characterization of the high temperature tearing resistance using the essential work of fracture—Application to dual phase ferritic stainless steels Academic Article
Characterization of zirconium, lanthanum and lead oxide deposits prepared by cathodic electrosynthesis Academic Article
Characterizing precipitate evolution of an Al–Zn–Mg–Cu-based commercial alloy during artificial aging and non-isothermal heat treatments by in situ electrical resistivity monitoring Academic Article
Characterizing solute segregation and grain boundary energy in binary alloy phase field crystal models Academic Article
Characterizing the microstructural effect of build direction during solidification of laser-powder bed fusion of Al-Si alloys in the dilute limit: A phase-field study Academic Article
Charge transport in polyimines containing trans-1,2-bis-9-carbazolylcyclobutane Academic Article
Chemical and Structural Changes in Manganese-Doped Yttria-Stabilized Zirconia Studied by Electron Energy Loss Spectroscopy Combined with Electron Diffraction Academic Article
Chemical vapor deposition-based growth of aligned ZnO nanowires on polycrystalline Zn2GeO4:Mn substrates Academic Article
Chemically Cross-Linked Cellulose Nanocrystal Aerogels with Shape Recovery and Superabsorbent Properties Academic Article
Chemistry of Materials Journal
China Welding (English Edition) Journal
Chitosan-mediated electrosynthesis of organic–inorganic nanocomposites Conference Paper
Cluster evolution mechanisms during aging in Al–Mg–Si alloys Academic Article
Clusters, plasticity and damage: a missing link? Conference Paper
Co-deformation of two-phase Cu–Cr alloys Conference Paper
Coarsening in multiphase multicomponent systems—I. The mean field limit Academic Article
Cobalt-Free Nickel-Rich Positive Electrode Materials with a Core–Shell Structure Academic Article
Coexistence of A- and B-Site Vacancy Compensation in La-Doped Sr1−xBaxTiO3 Academic Article
Coherent Diffusion in InGaAsP Heterostructures Conference Paper
Cold welding of Ag nanowires by large plastic deformation Academic Article
Collapse Mechanisms of Controlled Rocking Steel Braced Frames: Base Rocking Joint vs. Capacity-Protected Frame Members Academic Article
Colloidal Silica-Bearing Hydrosilane Groups Academic Article
Coloring problem and magnetocaloric effect of Gd3Co2.2Si1.8 Academic Article
Combustion synthesis and mechanical properties of molybdenum disilicide composites reinforced with SiC particulate Academic Article
Comment on Spontaneously Ordered Sol−Gel Composites with Submicrometer Periodicity Article
Comparative effects of Al-Si and galvannealed coatings on the properties of resistance spot welded hot stamping steel joints Academic Article
Comparative studies on the structure and properties of rapidly solidified and conventionally cast AM60 magnesium alloys Academic Article
Comparative study of small scale and ‘large scale’ resistance spot welding Academic Article
Comparing Magnetism in Isostructural Oxides A_0.8La_1.2MnO_4.1: Anisotropic Spin Glass (A = Ba) versus Long-Range Order (A = Sr) Academic Article
Comparing the effect of geometry on the stress-strain response of isolated corrugation structures and corrugation reinforced composite structures Academic Article
Comparison of Grain Structures and Textures in AA5754 Aluminum Alloy Sheets Processed by Room Temperature Rolling and Rolling with Liquid Nitrogen Conference Paper
Comparison of Semi-Solid Contraction of Aluminum Alloys During Solidification Quantified by a Combined Numerical-Experimental Approach Academic Article
Comparison of numerical modelling techniques for impact investigation on a wind turbine blade Academic Article
Comparison of the semi-solid constitutive behaviour of A356 and B206 aluminum foundry alloys Academic Article
Comparison of three state-of-the-art crystal plasticity based deformation twinning models for magnesium alloys Academic Article
Competition between surface energy and elastic anisotropies in the growth of coherent solid-state dendrites Academic Article
Composite Hydrogels with Tunable Anisotropic Morphologies and Mechanical Properties Academic Article
Composite Polymer–Metal Hydroxide Coatings with Flame-Retardant Properties Academic Article
Composite Structures Journal
Composite dip coating improves biocompatibility of porous metallic scaffolds Academic Article
Composite hydrophilic coating for conditioner aluminum fins Academic Article
Composites - Part A: Applied Science and Manufacturing Journal
Composites Part B: Engineering Composites Engineering Journal
Composites Science and Technology Journal
Compositional dependence of creep behaviour in silicon nitride ceramics Academic Article
Compositional effects on the creep ductility of a low alloy steel Academic Article
Compositionally Graded Steels: A Strategy for Materials Development Academic Article
Compositionally graded steels: The effect of partial decarburization on the mechanical properties of spherodite and pearlite Academic Article
Compression of crumpled aluminum thin foils and comparison with other cellular materials Academic Article
Computation of grain boundary stiffness and mobility from boundary fluctuations Academic Article
Computational Materials Science Journal
Computational homogenization of sheet molding compound composites based on high fidelity representative volume elements Academic Article
Computational materials science: A powerful and predictive tool Academic Article
Computer Simulation of Conventional and Barrier Screw Extruders Conference Paper
Computer modelling of pressure gas quenching in vacuum furnaces Academic Article
Computer simulation of the microstructure and rheology of semi-solid alloys under shear Academic Article
Concentration dependencies of components' properties: Interdependent yet individual Academic Article
Concurrent topology and stacking sequence optimization of composite laminate plates using lamination parameters Academic Article
Conductor materials for high field magnets Academic Article
Confidence intervals of calculated phase boundaries Academic Article
Configuration of loop patch at low strain amplitude in polycrystalline copper Academic Article
Connectivity of Phases and Growth Mechanisms in Peritectic Alloys Solidified at Low Speed: an X-Ray Tomography Study of Cu-Sn Academic Article
Constitutive Behavior of AA5754 Sheet Materials at Large Strains Academic Article
Constitutive Behavior of Commercial Grade ZEK100 Magnesium Alloy Sheet over a Wide Range of Strain Rates Conference Paper
Constitutive behavior of as-cast magnesium alloy Mg–Al3–Zn1 in the semi-solid state Academic Article
Constitutive modeling of AZ31 sheet alloy with application to axial crushing Academic Article
Contribution of grain boundary diffusion and capillarity forces to the diffusional creep of wires or fibers Academic Article
Contribution of grain boundary misorientation to intragranular globular austenite reversion and resultant in grain refinement in a high-strength low-alloy steel Academic Article
Control and Removal of Impurities from Al Melts: A Review Conference Paper
Control of Heat Input and Deformation on Resistance Micro-Welding of Fine Nickel Wires Academic Article
Control of interfacial intermetallic compounds in Fe–Al joining by Zn addition Academic Article
Controlled Diffusion Solidification (CDS) of Al-Zn-Mg-Cu (7050): Microstructure, heat treatment and mechanical properties Academic Article
Controlling intermetallic compounds formation during laser welding of NiTi to 316L stainless steel Academic Article
Controlling mechanical properties of additively manufactured hastelloy X by altering solidification pattern during laser powder-bed fusion Academic Article
Controlling the Material Properties and Biological Activity of Lipase within Sol−Gel Derived Bioglasses via Organosilane and Polymer Doping Academic Article
Controlling the Morphology of Methylsilsesquioxane Monoliths Using a Two-Step Processing Method Academic Article
Conversion of copper and manganese metallic films to spinel coating Academic Article
Converting n-type Co4Ge6Te6 skutterudite into p-type and enhancing its thermoelectric properties through Fe substitution Academic Article
Cooperative Two-Phase Growth from Solid Solution via Interphase and Grain Boundary Diffusion Conference Paper
Correction to Pb₃TeCo₃V₂O₁₄: A Potential Multiferroic Co Bearing Member of the Dugganite Series Academic Article
Correction to: Corrosion Performance of Friction Stir Linear Lap Welded AM60B Joints Academic Article
Correction to: Multi-Island Genetic-Algorithm-Based Approach to Uniquely Calibrate Polycrystal Plasticity Models for Magnesium Alloys Academic Article
Correction to: On Excess Gibbs Energies and Aphysical Formalisms Academic Article
Correlating Hardness Retention and Phase Transformations of Al and Mg Cast Alloys for Aerospace Applications Academic Article
Correlation of ridging and texture in ferritic stainless steel sheet Academic Article
Correlation of roping and texture in AA6111 automotive sheet Academic Article
Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe–Mn–C alloys Conference Paper
Corrigendum to ‘In situ neutron diffraction and crystal plasticity analysis on Q&P1180 steel during plastic deformation’ [Mater. Sci. Eng. A (2020) 140425] Academic Article
Corrigendum to ‘Layering misalignment and negative temperature dependence of interfacial free energy of B2-liquid interfaces in a glass forming system’ [Acta Mater. 219 (2021) 117259] Academic Article
Corrigendum to “Evaluation of an Al-Ce alloy for additive manufacturing” [Acta Mater. 126 (2017) 507–519] Academic Article
Corrigendum to “Optimizing weld morphology and mechanical properties of laser welded Al-Si coated 22MnB5 by surface application of colloidal graphite” [J. Mater. Process. Technol. 293 (2021) 117093] Academic Article
Corrigendum to “Synchrotron tomographic quantification of the influence of Zn concentration on dendritic growth in Mg-Zn alloys” [Acta Mater. 156 (2018) 287–296] Academic Article
Corrosion Performance of Friction Stir Linear Lap Welded AM60B Joints Academic Article
Corrosion Protection of Joining Areas in Magnesium Die-Cast and Sheet Products Conference Paper
Corrosion and ion release behavior of ultra-fine grained bulk pure copper fabricated by ECAP in Hanks solution as potential biomaterial for contraception Academic Article
Corrosion of New-Generation Steel in Outer Oil Pipeline Environments Academic Article
Corrosion of SiAlON by a Liquid Aluminium Lithium Alloy and Fluxes Used in Aluminium Casting Conference Paper
Corrosion protection of magnesium alloys by cold spray Academic Article
Corrosion-resistant silica coatings obtained by plasma-assisted chemical vapour deposition Academic Article
Corrugation Reinforced Composites: A Method for Filling Holes in Material-Property Space Academic Article
Counteraction of particulate segregation during transient liquid-phase bonding of aluminium-based MMC material Academic Article
Coupled solute drag and transformation stasis during ferrite formation in Fe-C-Mn-Mo Academic Article
Coupling in situ synchrotron X-ray tomographic microscopy and numerical simulation to quantify the influence of intermetallic formation on permeability in aluminium–silicon–copper alloys Academic Article
Coupling of Mold Flow Simulations with Two-Scale Structural Mechanical Simulations for Long Fiber Reinforced Thermoplastics Conference Paper
Coverage of rough substrates by ZnS using vacuum evaporation and atomic layer epitaxy Academic Article
Crack Tip Fields in a Single Edge Notched Aluminum Single Crystal Specimen Conference Paper
Crack shape studies in brittle porous materials Academic Article
Creep Behavior of a Sintered Silicon Nitride Academic Article
Creep Due to a Non-Newtonian Grain Boundary Phase Academic Article
Creep Mechanisms in Multiphase Ceramic Materials Academic Article
Creep and Creep Fracture in Hot-Pressed Alumina Academic Article
Creep and anelastic recovery of whisker- and platelet-reinforced ceramics Academic Article
Creep behavior of submicron copper films under irradiation Academic Article
Creep crack growth simulation under transient stress fields Academic Article
Creep-driven nitride scale growth in γ-TiAl Academic Article
Critical factors governing the thermal stability of austenite in an ultra-fined grained Medium-Mn steel Academic Article
Critical grain size for dislocation storage and consequences for strain hardening of nanocrystalline materials Academic Article
Critical role of strain partitioning and deformation twinning on cracking phenomenon occurring during cold rolling of two duplex medium manganese steels Academic Article
Crossed-Wire Laser Microwelding of Pt-10 Pct Ir to 316 LVM Stainless Steel: Part II. Effect of Orientation on Joining Mechanism Academic Article
Crossed-Wire Laser Microwelding of Pt-10 Pct Ir to 316 Low-Carbon Vacuum Melted Stainless Steel: Part I. Mechanism of Joint Formation Academic Article
Crystal chemistry and magnetic properties of Eu2TiO4 and Eu3Ti2O7 Academic Article
Crystal growth and magnetic anisotropy of YTiO3 Academic Article
Crystal plasticity based finite element modelling of large strain deformation in AM30 magnesium alloy Academic Article
Crystal plasticity based modeling of grain boundary sliding in magnesium alloy AZ31B sheet Academic Article
Crystal plasticity forming limit diagram analysis of rolled aluminum sheets Academic Article
Crystal structure and magnetism of Gd5−xEuxGe4 Academic Article
Crystal structure and polymorphism of PbAlBO4 Academic Article
Crystal structure of rare-earth-rich platinum pnictides RE5Pt2X (RE=Y, Gd, Tb, Dy, Ho, Er, Tm, Lu; X=Sb, Bi) and magnetic properties of Er5Pt2Bi Academic Article
Crystal structure, electronic and physical properties of monoclinic RE CuTe 2 in contrast to RE CuSe 2 ( RE = Pr, Sm, Gd, Dy and Er) Academic Article
Crystallization behavior of amorphous Al84Y9Ni5Co2 alloy Conference Paper
Crystallization of Yttria-Alumina-Silica Glasses Academic Article
Crystallographic study of liquid-metal-embrittlement crack path Academic Article
Current Opinion in Solid State and Materials Science Journal
Current international research into cellulose as a functional nanomaterial for advanced applications Academic Article
Cutting temperature effect on PCBN and CVD coated carbide tools in hard turning of D2 tool steel Academic Article
Cyclic deformation and twinning in a semi-solid processed AZ91D magnesium alloy Academic Article
Cyclic oxidation and wear of tungsten rods in contact with glass in atmospheric air Academic Article
Cyclic strain hardening in polycrystalline copper Academic Article
Cyclic stress–strain behavior of polycrystalline nickel Academic Article
Cyclic stress–strain response and dislocation structures in polycrystalline aluminum Academic Article
C–S–H/polyaniline nanocomposites prepared by in situ polymerization Academic Article
DIRECT OBSERVATION OF CRACK-PARTICLE INTERACTION IN BRITTLE COMPOSITES Conference Paper
Damage accumulation and mechanical properties of particle-reinforced metal–matrix composites during hydrostatic extrusion Academic Article
Damage and Fracture Mechanisms During High-Temperature Creep in Hot-Pressed Alumina Academic Article
Damage and fracture of dual-phase steels: Influence of martensite volume fraction Academic Article
Damage and rupture mechanisms in a bipercolated material: the example of austenoferritic duplex steels Conference Paper
Damage and rupture mechanisms in an austenoferritic duplex steel Academic Article
Damage development in low alloy TRIP-aided steels during air-bending Academic Article
Damage evolution in TWIP and standard austenitic steel by means of 3D X ray tomography Academic Article
Damage initiation in metal matrix composites Academic Article
Damage nucleating at second-phase particles: A constitutive model Academic Article
Damage studies in heterogeneous aluminium alloys using X-ray tomography Conference Paper
Debonding evolution in nonlinear FRP-retrofitted RC beams with cohesive interface Academic Article
Decarburization as a tool to explore parallels between solid-solid and liquid-solid transformations: Fe-C-Mn-Si steels Academic Article
Decorations of magnetic flux pinning positions on the (001) face of a single crystal of high-T_csuperconductor YBa₂(Cu, Au)₃O_7-δ Academic Article
Decoupling of the softening processes during rapid tempering of a martensitic steel Academic Article
Deep drawing characteristics of automotive aluminum alloys Academic Article
Defect Characterization of Barium Titanates, Tantalates and Niobates by PAS and ESR Conference Paper
Defect Characterization of II-VI Compound Semiconductors Using Positron Lifetime Spectroscopy Conference Paper
Defect Distribution in Large CZ-Silicon Wafers Investigated by Positron Annihilation Spectroscopy Conference Paper
Defect Physics Investigations Using Positron and Ion Beams Conference Paper
Defect and Diffusion Forum Journal
Deformation Mapping and the Role of Carbides on the Microstructure and Properties of Evolved Adiabatic Shear Bands Academic Article
Deformation and Fracture Behavior of Alumina Particle-Reinforced Al 6061-T6 Composite during Dynamic Mechanical Loading Conference Paper
Deformation and recrystallization behavior during hot working of a coarse-grain, nickel-base superalloy ingot material Academic Article
Deformation banding in a precipitation hardened aluminum alloy during simple shear deformation Academic Article
Deformation behavior of Mg-8.5wt.%Al alloy under reverse loading investigated by in-situ neutron diffraction and elastic viscoplastic self-consistent modeling Academic Article
Deformation behavior of solid-solution-strengthened Mg–9 wt.% Al alloy: In situ neutron diffraction and elastic–viscoplastic self-consistent modeling Academic Article
Deformation behaviour of particle-strengthened alloys: a Voronoi mesh approach Academic Article
Deformation inhomogeneity in large-grained AA5754 sheets Academic Article
Deformation mechanism maps for polycrystalline metallic multiplayers Academic Article
Deformation of copper single crystals to large strains at 4.2 K Academic Article
Deformation of copper single crystals to large strains at 4.2K Academic Article
Deformation twinning as a strengthening mechanism in microtruss cellular materials Academic Article
Deformation twinning in AZ31: Influence on strain hardening and texture evolution Academic Article
Deformation-Induced Defects in GaSb Conference Paper
Degradation Phenomena in Small-Molecule Organic Light-Emitting Devices Academic Article
Delineating the Role of Second Phase Particles in AA6111 Conference Paper
Dendritic coarsening model for rapid solidification of Ni-superalloy via electrospark deposition Academic Article
Dendritic evolution during coarsening of Mg-Zn alloys via 4D synchrotron tomography Academic Article
Denoising with wavelet analysis and its application to estimate water quality model parameters Academic Article
Dense polycrystalline calcium β″- and β-aluminas: Synthesis, xrd characterization and thermal stability Academic Article
Dense polycrystalline strontium β′'- and β-alumina: Synthesis, XRD characterization and thermal stability Academic Article
Densification during hot-pressing of carbon nanotube–metal–magnesium aluminate spinel nanocomposites Academic Article
Density and mechanical properties in selective laser melting of Invar 36 and stainless steel 316L Academic Article
Deposition of Fe–Al Intermetallic Coatings on Solid Oxide Fuel Cell (SOFC) Interconnects by Pack Cementation Academic Article
Design analysis of end notch flexure sandwich specimen with honeycomb core Academic Article
Design and characterization of a lamellar nanostructure in a low C steel Academic Article
Design of binder jet additive manufactured co-continuous ceramic-reinforced metal matrix composites Academic Article
Designing a Composite Material for Use in Brake Applications Conference Paper
Designing hybrid materials Academic Article
Detecting enthalpy ‘cross-over’ in vitrified solids by differential scanning calorimetry Academic Article
Determination of Grain-Boundary Film Thickness by the Fresnel Fringe Imaging Technique Conference Paper
Determination of Materials Selection Performance Indices Through the Combination of Numerical Modeling and Optimization Methods Academic Article
Determination of heat transfer rates in an industry-like spray quench system using multiple impinging water jets Academic Article
Determination of heat transfer rates in an industry-like spray quench system using multiple impinging water jets Academic Article
Determination of the Minimum Scan Size to Obtain Representative Textures by Electron Backscatter Diffraction Academic Article
Determination of the Rheological Behavior of Partially Solidified Alloys for the Prediction of Casting Defects Academic Article
Determination of the constitutive behaviour of AA6022-T4 aluminium alloy spot welds at large strains Academic Article
Determination of the crystal-melt interface kinetic coefficient from molecular dynamics simulations Academic Article
Determining the bonding in intermetallics using electron energy loss spectroscopy and density functional theory Conference Paper
Deuterium permeation in polycrystalline nickel pre-implanted with nickel and helium ions Academic Article
Development and Simulation of Sulfur-doped Graphene Supported Platinum with Exemplary Stability and Activity Towards Oxygen Reduction Academic Article
Development and characterisation of model TRIP steel microstructures Academic Article
Development of Macroporous Titania Monoliths Using a Biocompatible Method. Part 1: Material Fabrication and Characterization Academic Article
Development of Macroporous Titania Monoliths by a Biocompatible Method. Part 2: Enzyme Entrapment Studies Academic Article
Development of a heterogeneous microstructurally based finite element model for the prediction of forming limit diagram for sheet material Academic Article
Development of a visco-plastic constitutive modeling for thixoforming of AA6061 in semi-solid state Academic Article
Development of an experimental technique to assess the permeability of metal coated polymer films Academic Article
Development of flexible particle-laden elastomeric textiles with improved penetration resistance to hypodermic needles Academic Article
Development of high-strength, good-conductivity Cu/Ti bulk nano-layered composites by a combined roll-bonding process Academic Article
Development of interatomic potentials appropriate for simulation of solid–liquid interface properties in Al–Mg alloys Academic Article
Development of multi-phase and multi-component dynamic simulation model for composting processes Academic Article
Development of the surface structure of TRIP steels prior to hot-dip galvanizing Conference Paper
Die soldering: Effect of process parameters and alloy characteristics on soldering in the pressure die casting process Academic Article
Diffusion and Phase Transformations in Steels: a Tool for Experimentation and a Method for Modelling Conference Paper
Diffusion and Phase Transformations in Steels: a Tool for Experimentation and a Method for Modelling Conference Paper
Diffusion as a method for producing architectured materials Academic Article
Digital image correlation studies for microscopic strain distribution and damage in dual phase steels Academic Article
Direct Atomic Observation in Powdered 4H-Ba_0.8Sr_0.2Mn_0.4Fe_0.6O_2.7 Academic Article
Direct Bundle Simulation approach for the compression molding process of Sheet Molding Compound Academic Article
Direct bonding of copper and liquid crystal polymer Academic Article
Direct observation of the NiTi martensitic phase transformation in nanoscale volumes Academic Article
Directional Coarsening in Single Crystal Nickel Based Superalloys: A Simulation Conference Paper
Directional coarsening of Ni-based superalloys: Computer simulation at the mesoscopic level Academic Article
Discerning interface atomistic structure by phase contrast in STEM: The equilibrated Ni-YSZ interface Academic Article
Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel Academic Article
Discrete twin evolution in Mg alloys using a novel crystal plasticity finite element model Academic Article
Discussion of “Nucleation mechanism of eutectic phases in aluminum-silicon hypoeutectic alloys” Academic Article
Dislocation boundary width changes due to cyclic hardening Conference Paper
Dislocation densities and stored energy after cold rolling of Al-Mg alloys: Investigations by resistivity and differential scanning calorimetry Academic Article
Dislocation density-based modelling of plastic deformation of Zircaloy-4 Academic Article
Dislocation distribution and patterning in 〈a〉-axis Mg single crystals during early compression Academic Article
Dislocation mechanisms and symmetric slip in rolled nano-scale metallic multilayers Academic Article
Dislocation micromechanisms under single slip conditions Academic Article
Dislocation microstructures and surface morphology in fatigued fine-grained copper polycrystals Academic Article
Dislocation microstructures in fine-grained Cu polycrystals fatigued at low amplitude Academic Article
Dislocation structures in fatigued polycrystalline copper Academic Article
Dislocation substructure evolution in torsion of pure copper Academic Article
Disorder-Controlled Electrical Properties in the Ho₂Sb_1–xBi_xO₂ Systems Academic Article
Dissimilar Laser Joining of NiTi SMA and MP35N Wires Academic Article
Dissimilar Laser Welding/Brazing of 5754 Aluminum Alloy to DP 980 Steel: Mechanical Properties and Interfacial Microstructure Conference Paper
Dissimilar joining of carbon/carbon composites to Ti6Al4V using reactive resistance spot welding Academic Article
Dissimilar laser welding of NiTi shape memory alloy and copper Academic Article
Dissimilar laser welding of a CoCrFeMnNi high entropy alloy to 316 stainless steel Academic Article
Dissimilar laser welding of superelastic NiTi and CuAlMn shape memory alloys Academic Article
Dissolutive wetting of Ag on Cu: A molecular dynamics simulation study Academic Article
Distortion and printability of stent structures in laser powder bed fusion processing of NiTi alloys Academic Article
Distributed nonpoint source simulation model - case study in Thames River Basin of Canada Academic Article
Distribution of stress triaxiality in face-centered cubic polycrystals under equibiaxial loading Academic Article
Double Implanted Power MESFET Technology in 4H-SiC Conference Paper
Dramatic and Reversible Water‐Induced Stiffening Driven by Phase Separation within Polymer Gels Academic Article
Ductile fracture mechanisms in AISI 4340 steel Academic Article
Ductility enhancement in Mg-0.2%Ce alloys Academic Article
Ductilization of a powder metallurgy Al-17 wt pct Cu by means of channel-die compression and extrusion Academic Article
Dy5Ni0.66Bi2.34 and Lu5Ni0.56Sb2.44 – Substitution derivatives with the orthorhombic Yb5Sb3-type structure. Magnetocaloric effect of Dy5Ni0.66Bi2.34 Academic Article
Dynamic Strain Aging Behavior of a Mg-Ce Alloy and its Implications for Extrusion Academic Article
Dynamic Tensile Behavior of Fiber Laser Welds of Medium Manganese Transformation-Induced Plasticity Steel Academic Article
Dynamic actuation of a novel laser-processed NiTi linear actuator Conference Paper
Dynamic mechanical behavior of pure titanium Academic Article
Dynamic mechanical properties in relation to adiabatic shear band formation in titanium alloy-Ti17 Academic Article
Dynamic modeling for the prediction of surface errors in the milling of thin-walled sections Academic Article
Dynamic shear band formation in Aluminum 6061-T6 and Aluminum 6061-T6/Al2O3 composites Academic Article
Dynamic shear band propagation and failure in AISI 4340 steel Academic Article
Dynamics and Hysteresis of Hydrogen Intercalation and Deintercalation in Palladium Electrodes: A Multimodal In Situ X-ray Diffraction, Coulometry, and Computational Study Academic Article
Dy–Co–Si system at 870/1070 K Academic Article
EBSD study of the substructure development with cold deformation of dual phase steel Academic Article
EFFECT OF PHYSICAL AGEING ON THE MECHANICAL RELAXATION OF A CHALCOGENIDE GLASS. Academic Article
EMF Measurements of the Na-Si System Academic Article
Early ion implantation history (or “how I met Jim Mayer—and Högsted Phim!”) Academic Article
Effect of 5-sulfosalicylic acid and poly[2,5-bis(3-sulfonatopropoxy)-1,4-ethynylphenylene-alt-1,4-ethynylphenylene] on electrodeposition of polypyrrole–carbon nanotube films on stainless steel Academic Article
Effect of Beam-Column Connection Fixity on Collapse Performance of a Six-Storey Special Concentrically Braced Frame Academic Article
Effect of C and N and their absence on the kinetics of austenite-ferrite phase transformations in Fe-0.5Mn alloy Academic Article
Effect of Ca Addition on the Intensity of the Rare Earth Texture Component in Extruded Magnesium Alloys Academic Article
Effect of Ce and La on microstructure and properties of a 6xxx series type aluminum alloy Academic Article
Effect of Chemistry on Nonisothermal Tempering and Softening of Dual-Phase Steels Conference Paper
Effect of Continuous Galvanizing Heat Treatments on the Microstructure and Mechanical Properties of High Al-Low Si Transformation Induced Plasticity Steels Academic Article
Effect of Devitrification on Creep Deformation in Glass-Containing Ceramics Academic Article
Effect of Direct Aging on Heat-Affected Zone and Tensile Properties of Electrospark-Deposited Alloy 718 Academic Article
Effect of Grain Refinement on the Mechanical Behaviour of Ferritic Steels: Evolution of Isotropic Hardening and Kinematic Hardening Conference Paper
Effect of Grain Size Reduction and Geometrical Confinement in Fine Grained Copper: Potential Applications as a Material for Reversible Electrical Contacts Academic Article
Effect of Heat Treatment on Microstructure Evolution of X38CrMoV5-1 Hot-Work Tool Steel Produced by L-PBF Academic Article
Effect of Intercritical Annealing Time on Microstructure and Mechanical Behavior of Advanced Medium Mn Steels Conference Paper
Effect of Laser Positioning on the Microstructure and Properties of NiTi-Copper Dissimilar Laser Welds Academic Article
Effect of Laser Welding on Formability of DP980 steel Academic Article
Effect of Low-Temperature Recovery Treatments on Subsequent Recrystallization in Al-2.5%Mg Conference Paper
Effect of Low-Temperature Recovery Treatments on Subsequent Recrystallization in Al-2.5%Mg Conference Paper
Effect of Matrix Aging on the Behavior of Human Serum Albumin Entrapped in a Tetraethyl Orthosilicate-Derived Glass Academic Article
Effect of Mg content on Portevin–Le Chatelier band strain in Al–Mg sheet alloys Academic Article
Effect of Microsegregation on High‐Temperature Microstructure Evolution in Rapid Solidification Processed Nb‐Rich Ni Superalloys Academic Article
Effect of Mn and C on Grain Growth in Mn Steels Academic Article
Effect of Mn on strain accumulation in Nb microalloying steels Academic Article
Effect of Mo and Mo2C on the microstructure and properties of the cermets based on Ti(C,N) Academic Article
Effect of N on microstructure and mechanical properties of 16Cr5Ni1Mo martensitic stainless steel Academic Article
Effect of Nb Addition to Ti-Bearing Super Martensitic Stainless Steel on Control of Austenite Grain Size and Strengthening Academic Article
Effect of Ni addition on toughness and microstructure evolution in coarse grain heat affected zone Academic Article
Effect of Ormosil and Polymer Doping on the Morphology of Separately and Co-hydrolyzed Silica Films Formed by a Two-Step Aqueous Processing Method Academic Article
Effect of Plasma Cleaning on Fluxless Plasma Soldering of Pb-free Solder Balls on Si-wafer Academic Article
Effect of Process Atmosphere Dew Point and Tin Addition on Oxide Morphology and Growth for a Medium-Mn Third Generation Advanced Steel During Intercritical Annealing Academic Article
Effect of Process Parameters on a Metallurgical Route Providing Nano-Structured Single Phase Steel with High Work-Hardening Academic Article
Effect of Process Parameters on the Ageing of an Al-6% Zn-2.3% Mg Alloy Conference Paper
Effect of Process Variables on the Grain Size and Crystallographic Texture of Hot-Dip Galvanized Coatings Academic Article
Effect of Rate Sensitivity on Structural Sandwich Plates with Sinusoidal Corrugated Cores Academic Article
Effect of Residual Damage on Carrier Transport Properties in a 4H-SiC Double Implanted Bipolar Junction Transistor Conference Paper
Effect of Severe Plastic Deformation and Subsequent Silicon Spheroidizing Treatment on the Microstructure and Mechanical Properties of an Al-Si-Mg Alloy Academic Article
Effect of Shrinkage on Primary Dendrite Arm Spacing during Binary Al-Si Alloy Solidification Academic Article
Effect of Sintering and Porosity Development on Direct Reduction of Manganese Ore Pellets Academic Article
Effect of Sn Addition, Process Atmosphere pO2, and Annealing Time on the Selective Oxidation of a C-2Mn-1.7Si (Wt Pct) Advanced High-Strength Steel During Continuous Galvanizing Academic Article
Effect of Solute Nb on Grain Growth in Fe-30 Pct Mn Steel Academic Article
Effect of Sr-modification on the bendability of cast aluminum alloy A356 using digital image correlation method Academic Article
Effect of Strain Rate on the Bainitic Transformation in Fe-C-Mn-Si Medium-Carbon Bainitic Steels Academic Article
Effect of Stress Ratio on Fatigue Behaviour of Non-Crimp Fabric Composites at Room and Elevated Temperatures Academic Article
Effect of Surface Modification on Cumulative Tensile Ductility of AZ31 Magnesium Sheet Academic Article
Effect of Ti addition to Cu-Si alloy on the boron distribution in various phases Academic Article
Effect of TiC coating on electrode tip surface on electrode degradation during micro-resistance spot welding Academic Article
Effect of TiC coating on electrode tip surface on electrode degradation during resistance spot welding zinc coated steel Academic Article
Effect of Weld Location, Orientation, and Strain Path on Forming Behavior of AHSS Tailor Welded Blanks Academic Article
Effect of Zn interlayer on brazeability of AZ31B–Mg alloy to steel sheet Academic Article
Effect of Zn on the microstructure evolution of extruded Mg–3Nd (–Zn)–Zr (wt.%) alloys Academic Article
Effect of an applied stress on the recrystallization mechanisms of a zirconium alloy Academic Article
Effect of anaerobic digestion on nitrogen removal in treatment process of piggery wastewater Academic Article
Effect of annealing atmosphere on the galvanizing behavior of a dual-phase steel Conference Paper
Effect of asymmetric rolling on the texture and mechanical properties of AA6111-aluminum sheet Academic Article
Effect of carbon content on the mechanical properties and microstructural evolution of Fe–22Mn–C steels Academic Article
Effect of ceria on properties of yttrium-doped strontium titanate ceramics Academic Article
Effect of chemical composition on work hardening of Fe—Mn—C TWIP steels Academic Article
Effect of coating on fiber laser welded joints of DP980 steels Academic Article
Effect of coating type on microstructure and mechanical behavior of resistance spot welds of thin X626 aluminum sheet to low carbon steel Academic Article
Effect of cube texture on sheet metal formability Academic Article
Effect of cyclic deformation on strain enhanced grain growth during superplastic flow Academic Article
Effect of dynamic strain aging on the appearance of the rare earth texture component in magnesium alloys Academic Article
Effect of extension 101-2 twins on texture evolution at elevated temperature deformation accompanied by dynamic recrystallization Academic Article
Effect of forging force on fatigue behavior of spot-welded joints of aluminium alloy Academic Article
Effect of galvanneal-coating evolution during press-hardening on laser welding of 22MnB5 steel Academic Article
Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels Academic Article
Effect of grain orientation and local strains on void growth and coalescence in titanium Academic Article
Effect of heat input modes on microstructure, mechanical properties and porosity of laser welded NiTi-316L joints: A comparative study Academic Article
Effect of heat treatment on adiabatic shear bands in a high-strength low alloy steel Academic Article
Effect of heat treatment on stability of impact-induced adiabatic shear bands in 4340 steel Academic Article
Effect of heat treatment process on microstructure and properties of KD sucker rod steel Academic Article
Effect of heating rate on the combustion synthesis of Ti-Al intermetallic compounds Academic Article
Effect of high strain rate on plastic deformation of a low alloy steel subjected to ballistic impact Conference Paper
Effect of inhomogeneous deformation on anisotropy of AZ31 magnesium sheet Academic Article
Effect of irradiation defects on the work hardening behavior Academic Article
Effect of low cycle fatigue on subsequent high cycle fatigue life of 316L stainless steel Academic Article
Effect of martensite distribution on damage behaviour in DP600 dual phase steels Academic Article
Effect of microstructure on fracture in age hardenable Al alloys Academic Article
Effect of microstructure on tensile properties of electrospark deposition repaired Ni-superalloy Academic Article
Effect of microstructure on the nucleation and initiation of adiabatic shear bands (ASBs) during impact Academic Article
Effect of mixing rate on the morphology of primary Al phase in the controlled diffusion solidification (CDS) process Academic Article
Effect of particle distribution on deformation and damage of two-phase alloys Academic Article
Effect of physical ageing on the mechanical relaxation of a chalcogenide glass Academic Article
Effect of plastic deformation on residual stresses in ceramic/metal interfaces Academic Article
Effect of plastic deformation on the microstructure and properties of amorphous polycarbonate Academic Article
Effect of polarization on ripple formation in deep femtosecond laser machined cavities Academic Article
Effect of pre-deformation on the activation stress of {10–12} twinning in Mg–3Al–1Zn alloy Academic Article
Effect of pre-oxidation on the kinetics of reduction of ironsand Academic Article
Effect of pre-strain at elevated temperature on strain hardening of twinning-induced plasticity steels Academic Article
Effect of preparation conditions on cation ordering and dielectric properties of Ba(Mg1/3Ta2/3)O3 ceramics Academic Article
Effect of prior heat treatment on the dynamic impact behavior of 4340 steel and formation of adiabatic shear bands Academic Article
Effect of processing route on the spatial distributions of constituent particles and their role in the fracture process in AA5754 alloy sheet materials Academic Article
Effect of reverse dome stretching on dome height and forming limits of sheet materials Academic Article
Effect of runner design on the externally solidified crystals in vacuum die-cast Mg-3.0Nd-0.3Zn-0.6Zr alloy Academic Article
Effect of strontium on liquid structure of Al–Si hypoeutectic alloys using high-energy X-ray diffraction Academic Article
Effect of structure on the creep of open-cell nickel foams Conference Paper
Effect of temperature on superdislocation dissociation in Cu–Zn–Al 18R single crystals Academic Article
Effect of temperature, carbon content and crystallography on the lengthening kinetics of bainitic ferrite laths Academic Article
Effect of texture on the mechanical behavior of ultrafine grained magnesium alloy Academic Article
Effect of thermomechanical processing on grain structure development in a twin-belt strip cast automotive aluminum alloy Academic Article
Effect of thermomechanical treatment on the evolution of rolling and recrystallization textures in twin-belt cast AA5754 aluminum alloy Academic Article
Effect of triaxiality on void growth and coalescence in model materials investigated by X-ray tomography Academic Article
Effect of twinning on recrystallisation textures in deformed magnesium alloy AZ31 Academic Article
Effect of type-B Portevin–Le Chatelier bands on the onset of necking in uniaxial tension of strip cast AA5754 sheets Academic Article
Effect ofP_O2on Bulk and Grain Boundary Resistance of n-Type BaTiO₃at Cryogenic Temperatures Academic Article
Effective strain rate sensitivity of two phase materials Academic Article
Effects of Au plating on dynamic resistance during small-scale resistance spot welding of thin Ni sheets Conference Paper
Effects of CGL-compatible thermal processing, starting microstructure, and Sn micro-alloying on the mechanical properties of a medium-Mn third generation advanced high strength steel Academic Article
Effects of Carbon Variation on Microstructure Evolution in Weld Heat-Affected Zone of Nb-Ti Microalloyed Steels Academic Article
Effects of Deformation (Strain) and Heat Treatment on Grain Boundary Sensitization and Precipitation in Austenitic Stainless Steels Academic Article
Effects of Heat Treatment on Grain-Boundary β-Mg17Al12 and Fracture Properties of Resistance Spot-Welded AZ80 Mg Alloy Academic Article
Effects of Interfacial Lattice Mismatching on Wetting of Ni-Plated Steel by Magnesium Academic Article
Effects of Porosity on the Superplastic Properties of Submicronic Alumina-Zirconia Composites Conference Paper
Effects of Steel Coatings on Electrode Life in Resistance Spot Welding of Galvannealed Steel Sheets Academic Article
Effects of Strain Hardening and Initial Yield Strength on Machining-Induced Residual Stresses Academic Article
Effects of TiC composite coating on electrode degradation in microresistance welding of nickel-plated steel Academic Article
Effects of Welding Parameters on the Mechanical Performance of Laser Welded Nitinol Academic Article
Effects of ageing on the thermal conductivity of a silicon carbide particulate reinforced 6061 aluminium composite Academic Article
Effects of au plating on small-scale resistance spot welding of thin-sheet nickel Academic Article
Effects of basal texture on mechanical behaviour of magnesium alloy AZ31B sheet Academic Article
Effects of boundary migration and pinning particles on intergranular oxidation revealed by 2D and 3D analytical electron microscopy Academic Article
Effects of concavity on tensile and fatigue properties in fibre laser welding of automotive steels Academic Article
Effects of defects in hybrid sheet moulding compound – Evaluation of defects and the impact on mechanical properties Academic Article
Effects of deformation (strain) and heat treatment on grain boundary sensitization and precipitation in austenitic stainless steels Academic Article
Effects of electrode pitting morphology on resistance spot welding of aluminum alloy Academic Article
Effects of electrolyte on hardening in laser hole sealing of commercially pure grade 1 titanium Academic Article
Effects of extrusion parameters on the microstructure and mechanical properties of Mg–Zn–(Mn)–Ce/Gd alloys Academic Article
Effects of heat treatment on microstructure and tensile deformation of Mg AZ80 alloy at room temperature Academic Article
Effects of local phase conversion on the tensile loading of pulsed Nd:YAG laser processed Nitinol Academic Article
Effects of oxygen contamination in the argon shielding gas in laser welding of commercially pure titanium thin sheet Academic Article
Effects of particulate reinforcement and strain-rates on deformation and fracture behavior of Aluminum 6061-T6 under high velocity impact Academic Article
Effects of post-necking hardening behavior and equivalent stress–strain curves on the accuracy of M–K based forming limit diagrams Academic Article
Effects of pressure-temperature protocols on the properties of crystals and ageing effects – an analogy with glasses Academic Article
Effects of solutes and temperature on high-temperature deformation and subsequent recovery in hot-rolled low alloy steels Academic Article
Effects of surface conditions on resistance spot welding of Mg alloy AZ31 Academic Article
Effects of tempering mode on the structural changes of martensite Academic Article
Effects of the diversity of stable isotopes on properties of materials Academic Article
Effects of void fraction on void growth and linkage in commercially pure magnesium Academic Article
Effects of weld line position and geometry on the formability of laser welded high strength low alloy and dual-phase steel blanks Academic Article
Effects of weld microstructure on static and impact performance of resistance spot welded joints in advanced high strength steels Academic Article
Effects of welding parameters and surface pretreatments on resistance spot welding of AZ31B Mg alloy Academic Article
Effects on tool performance of cutting edge prepared by pressurized air wet abrasive jet machining (PAWAJM) Academic Article
Efficient Lightweight Supercapacitor with Compression Stability Academic Article
Elastoplastic analysis of AA7075-O aluminum sheet by hybrid micro-scale representative volume element modeling with really-distributed particles and in-situ SEM experimental testing Academic Article
Electrical Conductance in Biological Molecules Academic Article
Electrical Conductivity and Thermal Expansion of Spinels at Elevated Temperatures Academic Article
Electrical conductivity of NaSi at elevated temperatures Academic Article
Electrical conductivity of yttrium-doped SrTiO3: influence of transition metal additives Academic Article
Electrical discharge surface texturing for enhanced pool boiling heat transfer Academic Article
Electrical, morphological and thermal properties of microinjection molded polyamide 6/multi-walled carbon nanotubes nanocomposites Academic Article
Electrically conductive polymer nanocomposites as deformation sensors Academic Article
Electrocatalysis of Pt-Fe alloys produced by ion beam mixing Academic Article
Electrochemical Al2O3-Cr2O3 alloy coatings on non-oxide ceramic substrates Academic Article
Electrochemical Al2O3-ZrO2 composite coatings on non-oxide ceramic substrates Academic Article
Electrochemical Changes in Lithium-Battery Electrodes Studied Using ⁷Li NMR and Enhanced ¹³C NMR of Graphene and Graphitic Carbons Academic Article
Electrochemical Deposition of Composites Using Deoxycholic Acid Dispersant Academic Article
Electrochemical capacitance of MnOx films Academic Article
Electrochemical deposition of ceria and doped ceria films Academic Article
Electrochemical deposition of polypyrrole–carbon nanotube films using steroid dispersants Academic Article
Electrochemical preparation of PbO films Academic Article
Electrochemical processing and characterization of nickel hydroxide–polyelectrolyte films Academic Article
Electrochemistry: Development and Simulation of Sulfur-doped Graphene Supported Platinum with Exemplary Stability and Activity Towards Oxygen Reduction (Adv. Funct. Mater. 27/2014) Academic Article
Electrode degradation mechanism during resistance spot welding of zinc coated steel using Cu-TiB2 electrodes Academic Article
Electrode pitting in resistance spot welding of aluminum alloy 5182 Academic Article
Electrode worksheet interface behaviour during resistance spot welding of Al alloy 5182 Academic Article
Electrodeposition of Carbon Nanotubes Triggered by Cathodic and Anodic Reactions of Dispersants Academic Article
Electrodeposition of ceramic films from non-aqueous and mixed solutions Academic Article
Electrodeposition of chitosan–hemoglobin films Academic Article
Electrodeposition of composite hydroxyapatite–chitosan films Academic Article
Electrodeposition of composite iron oxide–poly(allylamine hydrochloride) films Academic Article
Electrodeposition of composite iron oxide–polyelectrolyte films Academic Article
Electrodeposition of composite materials containing functionalized carbon nanotubes Academic Article
Electrodeposition of hybrid organic–inorganic films containing iron oxide Academic Article
Electrodeposition of lanthanum hydroxide–polyethylenimine films Academic Article
Electrodeposition of polypyrrole-heparin and polypyrrole-hydroxyapatite films Academic Article
Electrodeposition of zinc and composite zinc–yttria stabilized zirconia coatings Academic Article
Electrodes for Electrochemical Supercapacitors Academic Article
Electrodes: Bench-Top Fabrication of Hierarchically Structured High-Surface-Area Electrodes (Adv. Funct. Mater. 24/2013) Academic Article
Electrolytic PZT films Academic Article
Electrolytic TiO2-RuO2 deposits Academic Article
Electrolytic and electrophoretic deposition of CeO2 films Academic Article
Electrolytic deposition of Gd2O3 and organoceramic composite Academic Article
Electrolytic deposition of ZrO2–Y2O3 films Academic Article
Electrolytic deposition of ZrTiO4 films Academic Article
Electrolytic deposition of niobium oxide films Academic Article
Electrolytic deposition of oxide films in the presence of hydrogen peroxide Academic Article
Electrolytic deposition of zirconia and zirconia organoceramic composites Academic Article
Electromagnetic impact welding of Mg to Al sheets Academic Article
Electron Microscopy Investigation of the Role of Surface Steps in the Generation of Dislocations during MOCVD Growth of GaN on 4H-SiC Conference Paper
Electron Microscopy of Annealed (Ni,Zn,Co)Fe2O4 Academic Article
Electron Microscopy of Ferrites Academic Article
Electron-Induced Quenching of Excitons in Luminescent Materials Academic Article
Electron-energy-loss spectroscopy and X-ray absorption spectroscopy as complementary probes for complex f-electron metals: cerium and plutonium Academic Article
Electrophoretic Deposition of Ceramic Nanoparticles Academic Article
Electrophoretic Deposition of Organic - Inorganic Composites for Biomedical Applications Conference Paper
Electrophoretic and electrolytic deposition of ceramic coatings on carbon fibers Academic Article
Electrophoretic deposition of LiFePO4 for Li-ion batteries Academic Article
Electrophoretic deposition of a memory-type flame retardant material Academic Article
Electrophoretic deposition of bioactive glass/polymer composite coatings with and without HA nanoparticle inclusions for biomedical applications Academic Article
Electrophoretic deposition of ceramic materials for fuel cell applications Academic Article
Electrophoretic deposition of chemically bonded ceramics in the system CaO-SiO2-P2O5 Academic Article
Electrophoretic deposition of composite films from solutions of conjugated polymers and their supramolecular complexes with carbon nanotubes Academic Article
Electrophoretic deposition of composite halloysite nanotube–hydroxyapatite–hyaluronic acid films Academic Article
Electrophoretic deposition of composite hydroxyapatite-chitosan coatings Academic Article
Electrophoretic deposition of composite hydroxyapatite–chitosan–heparin coatings Academic Article
Electrophoretic deposition of composite hydroxyapatite–silica–chitosan coatings Academic Article
Electrophoretic deposition of electrolyte materials for solid oxide fuel cells Academic Article
Electrophoretic deposition of flame retardant polymer–huntite coatings Academic Article
Electrophoretic deposition of functional organic molecules and composite films Academic Article
Electrophoretic deposition of hyaluronic acid and composite films for biomedical applications Academic Article
Electrophoretic deposition of manganese dioxide films using new dispersing agents Academic Article
Electrophoretic deposition of manganese dioxide–carbon nanotube composites Academic Article
Electrophoretic deposition of manganese oxide nanofibers Academic Article
Electrophoretic deposition of materials using lithocholic acid as a dispersant Academic Article
Electrophoretic deposition of organic–inorganic nanocomposites Conference Paper
Electrophoretic deposition of poly[3-(3-N,N-diethylaminopropoxy)thiophene] and composite films Academic Article
Electrophoretic deposition of silica–hyaluronic acid and titania–hyaluronic acid nanocomposites Conference Paper
Electrophoretic deposition of titanium dioxide using organic acids as charging additives Academic Article
Electrophoretic deposition—mechanisms, myths and materials Academic Article
Electrophoretic hydroxyapatite coatings and fibers Academic Article
Electrophoretic nanotechnology of ceramic films Academic Article
Electrosynthesis of high-purity TbMn2O5 nanoparticles and its nanocomposite with conjugated polymer: Surface, density of state and electrochemical investigation Academic Article
Electrosynthesis of organic–inorganic nanocomposites Conference Paper
Elemental distribution in the martensite–austenite constituent in intercritically reheated coarse-grained heat-affected zone of a high-strength pipeline steel Academic Article
Elevated temperature repetitive micro-scratch testing of AlCrN, TiAlN and AlTiN PVD coatings Academic Article
Enhanced analysis of nanoporous gold by atom probe tomography Academic Article
Enhanced ductility in round tensile bars produced by cladding a ductile ring Academic Article
Enhanced hardening in Cu/330 stainless steel multilayers by nanoscale twinning Academic Article
Enhanced red emission of glycothermally synthesized Ce:YAG nanophosphors via Mn2+ addition Academic Article
Enhanced thermomechanical functionality of a laser processed hybrid NiTi–NiTiCu shape memory alloy Academic Article
Enhancement of Carrier Mobilities of Organic Semiconductors on Sol-Gel Dielectrics: Investigations of Molecular Organization and Interfacial Chemistry Effects Academic Article
Enhancement of Ductility in Aluminum Alloys by the Control of Transition-Metal Solutes during Thermo-Mechanical Processing Academic Article
Enhancement of Ductility in Aluminum Alloys by the Control of Transition-Metal Solutes during Thermo-Mechanical Processing Conference Paper
Enhancement of Wet- and MQL-Based Machining of Automotive Alloys Using Cutting Tools with DLC/Polymer Surface Treatments Conference Paper
Enhancement of mechanical and functional properties of welded NiTi by controlling nickel vapourisation Academic Article
Enhancement of mechanical properties and thermoelectric performance of spark plasma sintered P-type Bismuth Telluride by powder surface oxide reduction Academic Article
Ensemble averaging stress–strain fields in polycrystalline aggregates with a constrained surface microstructure – Part 1: anisotropic elastic behaviour Conference Paper
Ensemble averaging stress–strain fields in polycrystalline aggregates with a constrained surface microstructure – Part 2: crystal plasticity Conference Paper
Entrapment of Living Bacterial Cells in Low-Concentration Silica Materials Preserves Cell Division and Promoter Regulation Academic Article
Entrapment of membrane proteins in sol-gel derived silica Conference Paper
Entropy and urban industry-environment system Academic Article
EnviRONment and other bath smelting processes for treating organic and ferrous wastes Academic Article
Environmental input-output model and its analysis on solid waste management sector. Part I: Model research Academic Article
Epitaxial Ni–Mn–Ga films derived through high temperaturein situdepositions Academic Article
Epitaxial thin films of multiferroic Bi₂FeCrO₆ with B-site cationic order Academic Article
Equation of state and electronic properties of EuVO4: A high-pressure experimental and computational study Academic Article
Equilibrium and diffusion in coherent multilayers Academic Article
Equilibrium and stability of phase-separating Au–Pt nanoparticles Academic Article
Errata Academic Article
Errata Academic Article
Erratum Academic Article
Erratum deformation mechanism maps for polycrystalline metallic multilayers Academic Article
Erratum to “Study of wear performance and tribological characterization of AlTiN PVD coatings with different Al/Ti ratios during ultra-high speed turning of stainless steel 304” [International Journal of Refractory Metals and Hard Materials 96 (2021) 105488] Academic Article
Erratum to: In situ sampling uncovers the dynamics of particle genesis and growth in an aerosol tube reactor Academic Article
Erratum to: Initiation of Stress Corrosion Cracks in X80 and X100 Pipe Steels in Near-Neutral pH Environment Academic Article
Erratum to: Some Tribological Influences on the Electrode-Worksheet Interface During Resistance Spot Welding of Aluminum Alloys Academic Article
Erratum: Metal-insulator transitions in La1-xTiO3, 0.0 ≤ x ≤ 0.33. Structure-property correlations (Chemistry of Materials (1994) 6, (2101)) Academic Article
Established and Emerging Materials for use as High-Field Magnet Conductors Academic Article
Estimation of Material Properties in Ferrous and AluminumAlloy Databases Academic Article
Eutectic solidification of aluminum-silicon alloys Conference Paper
Evaluating the Characteristics of Cast AZ91 Magnesium Alloy for Upset Protrusion Joining Method Academic Article
Evaluation of Biaxial Forming Limits by Bulge Testing Conference Paper
Evaluation of Cooling Rate Effects on the Mechanical Properties of Die Cast Magnesium Alloy AM60 Academic Article
Evaluation of Machinability under Various Cutting Conditions in High-Speed Machining Using Ball Nose-End Mills - Effects of Cutter Orientation and Cutting Environments Conference Paper
Evaluation of fatigue-crack initiation at inclusions in fully pearlitic steels Academic Article
Evaluation of yttrium-doped SrTiO3 as an anode for solid oxide fuel cells Academic Article
Evolution of Fe based intermetallic phases in Al–Si hypoeutectic casting alloys: Influence of the Si and Fe concentrations, and solidification rate Academic Article
Evolution of Precipitate Microstructure During Creep of an AA7449 T7651 Aluminum Alloy Academic Article
Evolution of Precipitated Phases during Ageing in High Alloyed Mg-Al Based Alloys Conference Paper
Evolution of Transient Nature Nanoscale Softening During Martensite Tempering Academic Article
Evolution of a mushy zone in a static temperature gradient using a volume average approach Academic Article
Evolution of adiabatic shear bands in a dual-phase steel at very high strain rates Academic Article
Evolution of internal stress variables during cyclic deformation of copper Academic Article
Evolution of joint formation in resistance microwelding of crossed Pt-10%Ir and 316 LVM stainless steel wires Academic Article
Evolution of microstructural length scales during solidification of magnesium alloys Academic Article
Evolution of microstructure and mechanical properties of medium Mn steels during double annealing Academic Article
Evolution of microstructure and strength during the ultra-fast tempering of Fe–Mn–C martensitic steels Academic Article
Evolution of strain throughout gallium nitride deposited on silicon carbide Academic Article
Expanded and nano-structured carbonaceous graphite for high performance anisotropic fuel cell polymer composites Academic Article
Experimental (TEM and STEM) investigation and theoretical approach to the fatigue-induced dissolution of δ′ precipitates in a 2.5 wt% Al-Li alloy Academic Article
Experimental and Numerical Analysis of Liquid Metal Embrittlement Crack Location Conference Paper
Experimental and numerical investigation of anisotropic and twinning behavior in Mg alloy under uniaxial tension Academic Article
Experimental and theoretical investigation of the scaled structure function in AlLi alloys Academic Article
Experimental and theoretical investigations of order-disorder in Cu2AlMn Conference Paper
Experimental assessment of utilizing fiber reinforced elastomeric isolators as bearings for bridge applications Academic Article
Experimental evidences on the role of silica nanoparticles surface morphology on the loading, release and activity of three proteins Academic Article
Experimental investigation and through process crystal plasticity-static recrystallization modeling of temperature and strain rate effects during hot compression of AA6063 Academic Article
Experimental investigation of adhesive fillet size on barely visible impact damage in metallic honeycomb sandwich panels Academic Article
Experimental investigation of void coalescence in a dual phase steel using X-ray tomography Academic Article
Experimental investigation of void coalescence in metallic sheets containing laser drilled holes Academic Article
Experimental research on coal fly ash activation Academic Article
Experimental simulation of surface pitting of degraded electrodes in resistance spot welding of aluminium alloys Academic Article
Experimental study of fracture behavior of magnesium single crystals Academic Article
Experimental survey of dopants in Zn13Sb10 thermoelectric material Academic Article
Experimental validation of a one-dimensional model for monolithic shape memory alloys with multiple pseudoelastic plateaus Academic Article
Exploiting Phonon‐Resonant Near‐Field Interaction for the Nanoscale Investigation of Extended Defects Academic Article
Exploring stress equivalence for solid solution strengthened Mg alloy polycrystals Academic Article
Extended Wavelength Responsivity of a Germanium Photodetector Integrated With a Silicon Waveguide Exploiting the Indirect Transition Academic Article
Extension of Ashby's Performance Indexes in Mixed Tension-Bending Solicitations Academic Article
Externally Addressable Smart Drug Delivery Vehicles: Current Technologies and Future Directions Academic Article
Extractor-free phase transfer of inorganic particles and application for supercapacitors Academic Article
FE simulations of gas blow forming and prediction of forming limit diagram of AZ31 magnesium sheet Academic Article
FIB and TEM characterization of subsurfaces of an Al–Si alloy (A390) subjected to sliding wear Academic Article
FINAL-STAGE DENSIFICATION OF (U,PU)O2 Conference Paper
FRACTURE BEHAVIOUR OF A MEDIUM STRENGTH Al-Zn-Mg ALLOY. Academic Article
FRACTURE CRITERIA FOR HIGH-STRENGTH STRUCTURAL-STEELS Conference Paper
FRP reinforced/prestressed concrete members: A torsional design model Academic Article
Fabrication and Characterization of Naturally Selected Epitaxial Fe-{111} Y2Ti2O7 Mesoscopic Interfaces: Some Potential Implications to Nano-Oxide Dispersion-Strengthened Steels Conference Paper
Fabrication of Ni-NiO composites by tape casting Academic Article
Fabrication of Ni-Plaque-Based Manganese Dioxide Electrodes for Electrochemical Supercapacitors Academic Article
Fabrication of a lithium sensor based on LiYO2 by liquid phase processing Academic Article
Fabrication of a novel laser-processed NiTi shape memory microgripper with enhanced thermomechanical functionality Conference Paper
Fabrication of artificial defects to study internal fatigue crack propagation in metals Academic Article
Fabrication of organoceramic films by electrodeposition Academic Article
Fabrication of superhydrophobic surfaces for corrosion protection: a review Academic Article
Facile fabrication of electrically conductive graphitic cellufoil for lighting and energy devices Academic Article
Factors Affecting Isothermal Solidification during Transient Liquid Phase-Brazing of Nickel Academic Article
Failure analysis and mechanical reliability of cast higher manganese silicide Academic Article
Failure analysis of fusion clad alloy system AA3003/AA6xxx sheet under bending Academic Article
Failure behavior of resistance spot welded advanced high strength steel: The role of surface condition and initial microstructure Academic Article
Failure study on laser welds of dual phase steel in formability testing Academic Article
Fast prediction of phase equilibrium at varying temperatures for use in multi-component phase field models Academic Article
Fast synchrotron X-ray tomographic quantification of dendrite evolution during the solidification of Mg Sn alloys Academic Article
Fatigue of Al-Li alloys: mechanical properties, microstructure (TEM and SEM) and strain localization Academic Article
Favorable Environment for a Nondendritic Morphology in Controlled Diffusion Solidification Academic Article
Fe3O4 spinel-Mn3O4 spinel supercapacitor prepared using Celestine blue as a dispersant, capping agent and charge transfer mediator Academic Article
Feasibility study of resistance spot welding of dissimilar Al/Mg combinations with Ni based interlayers Academic Article
Femtosecond laser irradiation induced heterojunctions between carbon nanofibers and silver nanowires for a flexible strain sensor Academic Article
Ferromagnetic semiconductors: Magnetic properties of the pyrochlores, (YxLu1−x)2V2O7 and (ScxLu1−x)2V2O7 Academic Article
Fiber Laser Welded AZ31 Magnesium Alloy: The Effect of Welding Speed on Microstructure and Mechanical Properties Academic Article
Fiber reinforced elastomeric isolators for the seismic isolation of bridges Academic Article
Finding Applications for Materials Academic Article
Finite Element Analysis of the Formation Mechanism of Electrode Pitting in Resistance Spot Welding of an Aluminum Alloy Conference Paper
Finite element analysis of effect of electrode pitting in resistance spot welding of aluminium alloy Academic Article
Finite element analysis of effects of soft zones on formability of laser welded advanced high strength steels Academic Article
Finite element analysis of unbonded square fiber-reinforced elastomeric isolators (FREIs) under lateral loading in different directions Academic Article
Finite element for analysing EBW residual stress in titanium alloy plates Academic Article
Finite element modeling of electron beam welding of a large complex Al alloy structure by parallel computations Academic Article
Finite element modeling of the formation of adiabatic shear bands in AISI 4340 steel Academic Article
Finite element modeling of the influence of anisotropic material properties on dislocations in metals Academic Article
Finite element modelling of residual stresses and strength differential effect in discontinuously reinforced metal matrix composites Academic Article
Finite element simulation of resistance spot welding process of aluminum alloys Academic Article
Finite element study of the effect of support rotation on the horizontal behavior of elastomeric bearings Academic Article
Finite elements computation for the elastic properties of a regular stacking of hollow spheres Academic Article
First-principle modelling of the ferroelectric switching in BaTiO₃: concurrent switching versus domain wall motion Academic Article
Flip Chip Bump Formation of Sn–1.8Bi–0.8Cu–0.6In Solder by Stencil Printing Academic Article
Flow Stress and Microstructure Modelling of Ferrite-Pearlite Steels during Cold Rolling Conference Paper
Flow stress and electrical resistivity in plastically deformed Al subjected to intermittent annealing Academic Article
Fluorescence Analysis of the Properties of Structure-Switching DNA Aptamers Entrapped in Sol–Gel-Derived Silica Materials Academic Article
Fluorescence and NMR Characterization and Biomolecule Entrapment Studies of Sol−Gel-Derived Organic−Inorganic Composite Materials Formed by Sonication of Precursors Academic Article
Fluorescent Probes as Reporters on the Local Structure and Dynamics in Sol−Gel-Derived Nanocomposite Materials Academic Article
Focused ion beam milling: A practical method for preparing cast Al-Si alloy samples for transmission electron microscopy Academic Article
Forensic Analyses of Stress-Strain Diagrams to Evaluate Contributions from Microstructure Conference Paper
Forensic analyses of microstructure evolution of stage II & III: New assimilated model for work-hardening in FCC metals Academic Article
Foreword Academic Article
Foreword Academic Article
Formability Analysis of Diode-Laser-Welded Tailored Blanks of Advanced High-Strength Steel Sheets Academic Article
Formability Assessment of Prestrained Automotive Grade Steel Sheets Using Stress Based and Polar Effective Plastic Strain-Forming Limit Diagram Academic Article
Formability Maps Academic Article
Formability of Dual-Phase Steels Academic Article
Formation and Toughening Mechanisms of Dispersions in Interfacial Intermetallics of Dissimilar Laser Al/Steel Joints Academic Article
Formation and characterization of calcium silicate hydrate–hexadecyltrimethylammonium nanostructure Academic Article
Formation and characterization of zinc oxide nanowires grown on hexagonal-prism microstructures Academic Article
Formation mechanism of electrode pitting in resistance spot welding of aluminum alloys Academic Article
Formation of a TiB2-reinforced copper-based composite by mechanical alloying and hot pressing Academic Article
Formation of bands of ultrafine beryllium particles during rapid solidification of AlBe alloys: Modeling and direct observations Academic Article
Formation of cellulose-based electrostatic layer-by-layer films in a magnetic field Conference Paper
Formation of hollow fibers by electrophoretic deposition Academic Article
Formation of polytypes structures in Mg single crystals Academic Article
Fouling and corrosion of bed nozzles in a bubbling fluidized-bed power boiler Academic Article
Fracture Toughness of a Partially Stabilized ZrO2 in the System CaO-ZrO2 Academic Article
Fracture of a brittle particulate composite Academic Article
Fracture of a brittle particulate composite Academic Article
Fracture of an osprey™ AlSiFe alloy: A microstructure based model for fracture of microheterogeneous materials Academic Article
Fracture topography of commercial copper Academic Article
Fracture toughness of diamondlike carbon coatings Academic Article
Free energy of steps at faceted (1 1 1) solid-liquid interfaces in the Si-Al system calculated using capillary fluctuation method Academic Article
Free vibration of annular and circular asymmetric composite laminates Academic Article
Frequency Domain Spectroscopy in Rare-Earth-Doped Gain Media Academic Article
Friction stir lap welding of aluminum alloy to advanced high strength steel using a cold-spray deposition as an interlayer Academic Article
Friction stir processing of AlSi10Mg parts produced by selective laser melting Academic Article
From atoms to dendrites Academic Article
Frontiers of Materials Science in China Journal
Frustrated rare earth magnetism: Spin glasses, spin liquids and spin ices in pyrochlore oxides Conference Paper
Fuel Composition Effects on Burner Rig Corrosion of a Silicon Carbide Exposed at 1000°C and 1300°C Academic Article
Fuel cap stamping simulation of AA5754 sheets using a microstructure based macro-micro multi-scale approach Academic Article
Fusion Zone Microstructure Evolution of Al-Alloyed TRIP Steel in Diode Laser Welding Academic Article
Fusion zone microstructure evolution of fiber laser welded press-hardened steels Academic Article
Fuzzy approach for dynamic simulation of composting process under uncertainty Academic Article
GFRP hollow column to built-up beam adhesive connection: Mechanical behaviour under quasi-static, cyclic and fatigue loading Academic Article
Gas and Heat Treatment Effects on the Defect Structure of a-SiC:H Films Conference Paper
Geometric, electronic and elastic properties of dental silver amalgam γ-(Ag3Sn), γ1-(Ag2Hg3), γ2-(Sn8Hg) phases, comparison of experiment and theory Academic Article
Geometrically induced strain hardening Academic Article
Gilles Canova (1954-1997) Academic Article
Grain Size Distribution and Interfacial Heat Transfer Coefficient during Solidification of Magnesium Alloys Using High Pressure Die Casting Process Academic Article
Grain growth kinetics and annealed texture characteristics of Mg-Sc binary alloys Academic Article
Grain size effect on deformation behaviour of Mg–Sc alloys Academic Article
Green Templating of Ultraporous Cross-Linked Cellulose Nanocrystal Microparticles Academic Article
Green template-free synthesis and characterization of mesoporous alumina as a high value-added product in aluminum black dross recycling strategy Academic Article
Grinding of cemented carbide with electrical spark assistance Academic Article
Growth of austenite from as-quenched martensite during intercritical annealing in an Fe–0.1C–3Mn–1.5Si alloy Academic Article
Growth of β intermetallic in an Al-Cu-Si alloy during directional solidification via machine learned 4D quantification Academic Article
HIGH-TEMPERATURE DEFORMATION OF COPPER SINGLE-CRYSTALS Academic Article
Hanjie Xuebao/Transactions of the China Welding Institution Journal
Hazard mitigation and strengthening of unreinforced masonry walls using composites Academic Article
Heat Treatment of Metals Journal
Heat treatment of explosively consolidated molybedenum: TEM studies Academic Article
Hemin‐Doped, Ionically Crosslinked Silicone Elastomers with Peroxidase‐Like Reactivity Academic Article
Heterogeneities in local plastic flow behavior in a dissimilar weld between low-alloy steel and stainless steel Academic Article
Heterogeneity in Plastic Deformation Conference Paper
Heterogeneous and Architectured Materials: A Possible Strategy for Design of Structural Materials Academic Article
Heterogeneous deformation of a two phase nickel – tungsten alloy Academic Article
Heterogeneous precipitation on dislocations: effect of the elastic field on precipitate morphology Academic Article
Hierarchical adaptive nanostructured PVD coatings for extreme tribological applications: the quest for nonequilibrium states and emergent behavior Academic Article
Hierarchically Structured, Self-Healing, Fluorescent, Bioactive Hydrogels with Self-Organizing Bundles of Phage Nanofilaments Academic Article
High Resolution Transmission Electron Microscope Investigations of Phases, Domains and Interfaces in Ti50.5Al46.5Cr3/TiB2 Composites Conference Paper
High Strength and Electrical Conductivity of UFG Copper Alloys Conference Paper
High areal capacitance of FeOOH-carbon nanotube negative electrodes for asymmetric supercapacitors Academic Article
High areal capacitance of Mn3O4-carbon nanotube electrodes Academic Article
High magnetic field magnetization and specific heat of the 2D spin–dimer system SrCu2(BO3)2 Conference Paper
High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships Academic Article
High order X-ray diffraction and internal atomic layer roughness of epitaxial and bulk SiC materials Academic Article
High resolution transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction studies of nanocrystalline manganese borohydride (Mn(BH4)2) after mechano-chemical synthesis and thermal dehydrogenation Academic Article
High spatial resolution PEELS characterization of FeAl nanograins prepared by mechanical alloying Academic Article
High speed end milling of hardened AISI D2 tool steel (∼58 HRC) Conference Paper
High speed machining of moulds and dies for net shape manufacture Academic Article
High strain-rate fracture and failure of a high strength low alloy steel in compression Academic Article
High strength and high electrical conductivity bulk Cu Academic Article
High temperature cleavage fracture in 5383 aluminum alloy Conference Paper
High temperature wetting: Insights from atomistic simulations Academic Article
High temperature, high strain rate embrittlement of Al-Mg-Mn alloy: evidence of cleavage of an fcc alloy Academic Article
High-Resolution Electron Microscopy Investigation of Viscous Flow Creep in a High-Purity Silicon Nitride Academic Article
High-Resolution Electron Microscopy and Kinetic Studies of Precipitation Hardening Reactions in Cast Al-5.8Zn-2.2Mg-2.5Cu Academic Article
High-Temperature Refining of Metallurgical-Grade Silicon: A Review Academic Article
High-density three-dimensional mapping of internal strain by tracking microstructural features Academic Article
High-ductility magnesium–zinc–cerium extrusion alloys Academic Article
High-resolution transmission electron microscopy investigation of a stacking fault in beta-Si3N4 Academic Article
High-strength titanium alloy/steel butt joint produced via friction stir welding Academic Article
High-strength, high-conductivity copper-steel composite Academic Article
High-temperature corrosion of a silicon-infiltrated silicon carbide material in combustion atmospheres Academic Article
High-temperature modification of Y5Sb3 and its ternary analogue Y5NixSb3−x Academic Article
High-temperature phase evolution of the ZnAlMg coating and its effect on mitigating liquid-metal-embrittlement cracking Academic Article
High-temperature stability and faceting of the icosahedral Al—Fe—Cu phase Academic Article
Highlights of the Salt Extraction Process Academic Article
Highly Porous and Preferentially Oriented {100} Platinum Nanowires and Thin Films Academic Article
Homogeneous deformation of Zr–Ti–Al–Cu–Ni bulk metallic glasses Conference Paper
Homogeneous deformation of bulk metallic glasses in the super-cooled liquid state Conference Paper
Homogenization of multicomponent alloys via partial melting Conference Paper
Hot Tearing in Cast Aluminum Alloys Conference Paper
Hot deformation behaviour of Ni–30Fe–C and Ni–30Fe–Nb–C model alloys Academic Article
Hot working and restoration mechanisms in duplex stainless steels Academic Article
Hot-corrosion of silicon carbide in combustion gases at temperatures above the dew point of salts Conference Paper
Hybrid plasma bonding of germanium and glass wafers at low temperature Academic Article
Hydridosilsesquioxane Modified Silica-Supported Platinum Nanoparticles Academic Article
Hydrogen and Nitrogen Loss during ERD Analysis of Siliicon (Oxy)nitrides Conference Paper
Hydrogen trapping by VC precipitates and structural defects in a high strength Fe–Mn–C steel studied by small-angle neutron scattering Academic Article
Hydrostatic Extrusion of Metal Matrix Composites Academic Article
INFLUENCE OF A FINE PARTICLE DISPERSION ON THE RECRYSTALLIZATION BEHAVIOUR OF A TWO PHASE ALUMINIUM ALLOY. Academic Article
INFLUENCE OF CEO2-COATING ON THE HIGH-TEMPERATURE OXIDATION OF CHROMIUM Academic Article
INFLUENCE OF MICROSTRUCTURAL FEATURES ON THE FORMABILITY OF ALUMINIUM ALLOYS. Academic Article
Identification of the role of Al-Fe-Mn-Si large casting dispersoids in age-hardenable aluminum alloys using small angle X-ray scattering Academic Article
Identifying Critical Connections for the Global Performance of Steel Moment Resisting Frames Academic Article
Image analysis of electrode degradation in resistance spot welding of aluminium Academic Article
Image processing for machine vision measurement of hot formed parts Academic Article
Immersed friction stir welding of ultrafine grained accumulative roll-bonded Al alloy Academic Article
Impact of liquid metal embrittlement cracks on resistance spot weld static strength Academic Article
Impedance spectroscopy characterization of GaAs nanowire bundles grown by metal-catalyzed molecular beam epitaxy Conference Paper
Implementing a non-local lattice particle method in the open-source large-scale atomic/molecular massively parallel simulator Academic Article
Improved Multiple Ageing Treatments for AA6111 Conference Paper
Improved interdigital sensors for structural health monitoring of composite retrofit systems Academic Article
Improved multi-order parameter and multi-component model of polycrystalline solidification Academic Article
Improvement of damping properties in laser processed superelastic Cu-Al-Mn shape memory alloys Academic Article
Improvement of fatigue performance of laser powder bed fusion fabricated IN625 and IN718 superalloys via shot peening Academic Article
Improvement of thermal conductivity of diamond/Al composites by optimization of liquid-solid separation process Academic Article
Improvements in the thermoelectric efficiency of SrTiO3 through donor doping Academic Article
Improving Dielectric Constant of Polymers through Liquid Electrolyte Inclusion Academic Article
Improving the Performance of a Sol−Gel-Entrapped Metal-Binding Protein by Maximizing Protein Thermal Stability before Entrapment Academic Article
Improving the ductility in laser welded joints of CoCrFeMnNi high entropy alloy to 316 stainless steel Academic Article
In Situ Observation of Dissolution of Oxide Inclusions in Steelmaking Slags Academic Article
In Situ Observations of Agglomeration of Non-metallic Inclusions at Steel/Ar and Steel/Slag Interfaces by High-Temperature Confocal Laser Scanning Microscope: A Review Academic Article
In Situ Study on Interrupted Growth Behavior and Crystallography of Bainite Academic Article
In Situ X-Ray Absorption Spectroscopy Disentangles the Roles of Copper and Silver in a Bimetallic Catalyst for the Oxygen Reduction Reaction Academic Article
In situ TEM compression testing of Mg and Mg–0.2wt.% Ce single crystals Academic Article
In situ X-ray observation of semi-solid deformation and failure in Al–Cu alloys Academic Article
In situ characterization of microstructural instabilities: Recovery, recrystallization and abnormal growth in nanoreinforced steel powder Academic Article
In situ evaluation of dynamic precipitation during plastic straining of an Al–Zn–Mg–Cu alloy Academic Article
In situ formation of metal matrix composites using binder jet additive manufacturing (3D printing) Academic Article
In situ high-temperature X-ray and neutron diffraction of Cu–Mn oxide phases Academic Article
In situ neutron diffraction and crystal plasticity analysis on Q&P1180 steel during plastic deformation Academic Article
In situ observation of deformation behavior of chain aggregate inclusions: a case study for Al2O3 at a liquid steel/argon interface Academic Article
In situ quantification of the nucleation and growth of Fe-rich intermetallics during Al alloy solidification Academic Article
In situ sampling uncovers the dynamics of particle genesis and growth in an aerosol tube reactor Conference Paper
In situ transmission electron microscopy study of deformation of an aluminum alloy tribolayer Academic Article
In-Situ Study of the Tensile Deformation and Fracture Modes in Peak-Aged Cast Mg-11Y-5Gd-2Zn-0.5Zr (Weight Percent) Academic Article
In-plane compression modulus and strength of Nomex honeycomb cores Academic Article
In-situ analysis of incipient melting of Al2Cu in a novel high strength Al-Cu casting alloy using laser scanning confocal microscopy Academic Article
In-situ effect in cross-ply laminates under various loading conditions analyzed with hybrid macro/micro-scale computational models Academic Article
In-situ investigation of incipient melting in a 319 type Al alloy using laser scanning confocal microscopy Academic Article
In-situ measurement of local strain partitioning in a commercial dual-phase steel Academic Article
In-situ sampling uncovers the dynamics of particle genesis and growth in an aerosol tube reactor Academic Article
InVADE: Integrated Vasculature for Assessing Dynamic Events Academic Article
Inclusion engineering for tire cord Academic Article
Incorporating three-dimensional mechanisms into two-dimensional dislocation dynamics Academic Article
Incorporating three-dimensional mechanisms into two-dimensional dislocation dynamics Academic Article
Incorporation of indium into the Zn13Sb10 thermoelectric material Academic Article
Increasing silver leaching rate from leaching-resistant zinc residues by thiourea leaching method with pressurized preoxidation process Academic Article
Indentation Behaviour of Interlocked Structures Made of Ice: Influence of the Friction Coefficient Academic Article
Indentation of interlocked assemblies: 3D discrete simulations and experiments Academic Article
Industrial Ceramics Journal
Industrial Heating Journal
Industrial equipment and process for continuous production of engine oil from plastic wastes Academic Article
Influence factors and mechanism of biological manganese removal Academic Article
Influence of Additives on Performance of Polypyrrole–Carbon Nanotube Supercapacitors Academic Article
Influence of Al2Cu morphology on the incipient melting characteristics in B206 Al alloy Academic Article
Influence of AlF3 and hydrothermal conditions on morphologies of α-Al2O3 Academic Article
Influence of Aliovalent Cation Substitution and Mechanical Compression on Li-Ion Conductivity and Diffusivity in Argyrodite Solid Electrolytes Academic Article
Influence of Fe-rich intermetallics on solidification defects in Al–Si–Cu alloys Academic Article
Influence of Ferrous Sulfide on Carbothermic Reduction of Panzhihua Ilmenite Concentrate Academic Article
Influence of Martensite–Austenite constituents formed at different intercritical temperatures on toughness Academic Article
Influence of Microstructural Length Scale on the Strength and Annealing Behavior of Pearlite, Bainite, and Martensite Conference Paper
Influence of Microstructure on Uniaxial Strain Localization in AA5754 Aluminum Sheets Produced by Various Processing Routes Academic Article
Influence of Nb Stabilization on the Recovery and Recrystallization Kinetics of a Ferritic Stainless Steel: Consequences on Magnetic Losses Conference Paper
Influence of Ni interlayer width on interfacial reactions and mechanical properties in laser welding/brazing of Al/Mg lap joint Academic Article
Influence of SC-HAZ microstructure on the mechanical behavior of Si-TRIP steel welds Academic Article
Influence of Spatial Grain Orientation Distribution on Sheet Metal Necking Conference Paper
Influence of Strain Path and Initial Microstructure on the Work Hardening Behaviour of a Al-Mg-Mn Alloy Conference Paper
Influence of ZrO2 addition on melting kinetics of a YSiAlO glass-ceramic Academic Article
Influence of a damage zone on high temperature crack growth in brittle materials Academic Article
Influence of a reduced mobility of triple points on grain growth in two dimensions Academic Article
Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe–Mn–C steel Conference Paper
Influence of cerium on the texture and ductility of magnesium extrusions Academic Article
Influence of constraints on the effective inplane extensional properties of honeycomb core Academic Article
Influence of copper addition on precipitation kinetics and hardening in Al–Zn–Mg alloy Academic Article
Influence of deformation twinning on static annealing of AZ31 Mg alloy Academic Article
Influence of dislocation microstructure on low temperature magnetoresistance in copper single- and polycrystals Academic Article
Influence of dopants and carbon nanotubes on polypyrrole electropolymerization and capacitive behavior Academic Article
Influence of matrix strength and damage accumulation on the mechanical response of a particulate metal matrix composite Academic Article
Influence of microstructure and weld size on the mechanical behaviour of dissimilar AHSS resistance spot welds Academic Article
Influence of microstructure on local intra- and intergranular deformations during creep of a nickel-based superalloy at 700°C Academic Article
Influence of microstructure-driven strain localization on the ductile fracture of metallic alloys Academic Article
Influence of molecular structure of extractor molecules on liquid-liquid extraction of oxide particles and properties of composites Academic Article
Influence of nitrogen microwave radicals on sequential plasma activated bonding Academic Article
Influence of oxide volume fraction on abnormal growth of nanostructured ferritic steels during non-isothermal treatments: An in situ study Academic Article
Influence of predeformation and agEing of an Al–Zn–Mg alloy—II. Modeling of precipitation kinetics and yield stress Academic Article
Influence of predeformation on ageing in an Al–Zn–Mg alloy—I. Microstructure evolution and mechanical properties Academic Article
Influence of prior austenite grain size on martensite–austenite constituent and toughness in the heat affected zone of 700MPa high strength linepipe steel Academic Article
Influence of probe geometry in micro-scale impact testing of nano-multilayered TiAlCrN/NbN coatings deposited on WC-Co Academic Article
Influence of quench and heating rates on the ageing response of an Al–Zn–Mg–(Zr) alloy Academic Article
Influence of relative density on the architecture and mechanical behaviour of a steel metallic wool Academic Article
Influence of second-phase morphology and topology on mechanical and fracture properties of Al-Si alloys Conference Paper
Influence of severe plastic deformation on the precipitation hardening of a FeSiTi steel Academic Article
Influence of sheet thickness ratio on fracture mechanisms of Al-steel resistance spot welds produced using multi-ring domed electrode Academic Article
Influence of the restored work-hardening rate on ductility studied by X-ray computed tomography Academic Article
Influence of thickness of individual elastomer layers (first shape factor) on the response of unbonded fiber-reinforced elastomeric bearings Academic Article
Influence of wire materials and coating thickness on stress conditions in silicon substrate during copper thermosonic wire bonding Academic Article
Influence of zinc substitution on magnetic and electrical properties of MgCuZn ferrite nanocrystalline powders prepared by sol–gel, auto-combustion method Academic Article
Influences of blocky retained austenite on the heat-affected zone softening of dual-phase steels Academic Article
Inhibition of grain growth by particle distribution: effect of spatial heterogeneities and of particle strength dispersion Academic Article
Inhomogeneous Dehydroxylation of Talc Academic Article
Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography Academic Article
Initiation of Stress Corrosion Cracks in X80 and X100 Pipe Steels in Near-Neutral pH Environment Academic Article
Inkjet Printing of a Highly Loaded Palladium Ink for Integrated, Low-Cost pH Sensors Academic Article
Inkjet-printed bifunctional carbon nanotubes for pH sensing Academic Article
Insights into twinning in Mg AZ31: A combined EBSD and machine learning study Academic Article
Integrated modeling of friction stir welding of 6xxx series Al alloys: Process, microstructure and properties Academic Article
Integrated rainfall-runoff simulation and factorial analysis approach for watershed systems modeling under uncertainty Academic Article
Integrating object-oriented methods and formal methods for requirement engineering Academic Article
Intelligent Microscopy for EBSD Applications Conference Paper
InterCeram: International Ceramic Review Journal
Interaction between primary dendrite arm spacing and velocity of fluid flow during solidification of Al–Si binary alloys Academic Article
Interactions between deformation-induced defects and carbides in a vanadium-containing TWIP steel Academic Article
Interface Diffusion Controlled Reactions in Multilayers Conference Paper
Interface kinetics of rapid solidification of binary alloys by atomistic simulations: Application to Ti-Ni alloys Academic Article
Interfacial Nano-Mechanical Properties of Copper Joints Bonded with Silver Nanopaste near Room Temperature Academic Article
Interfacial Reaction between Nickel Oxide and Lanthanum Gallate during Sintering and its Effect on Conductivity Academic Article
Interfacial microstructure and properties of Ti(C, N)/Ni bonded by transient liquid-phase diffusion Academic Article
Interfacial phenomena and joint strength in resistance microwelding of crossed Au-plated Ni wires Academic Article
Interlayer selection and thermal stresses in brazed Si₃N₄⁻steel joints Academic Article
Intermetallics Journal
Intermittent plastic flow of single crystals: central problems in plasticity: a review Academic Article
Internal Stresses in Nanocrystalline Nickel and Nickel-Iron Alloys Conference Paper
Internal oxidation of NiAl and NiAlSi alloys at the dissociation pressure of NiO Academic Article
Internal stress measurements in a model Cu-sapphire composite Academic Article
Internal stresses in cold-deformed Cu–Ag and Cu–Nb wires Academic Article
International Journal of Applied Ceramic Technology Journal
International Journal of Cast Metals Research Journal
International Journal of Materials and Product Technology Journal
International Journal of Powder Metallurgy (Princeton, New Jersey) Journal
International Journal of Refractory Metals and Hard Materials International Journal of Refractory & Hard Metals Journal
International Materials Reviews Journal
Interphase precipitation in vanadium-alloyed steels: Strengthening contribution and morphological variability with austenite to ferrite transformation Academic Article
Intralayer Cation Ordering in a Brownmillerite Superstructure: Synthesis, Crystal, and Magnetic Structures of Ca₂FeCoO₅ Academic Article
Investigation of AlMe₃, BEt₃, and ZnEt₂ as Co-Reagents for Low-Temperature Copper Metal ALD/Pulsed-CVD Academic Article
Investigation of Anelastic Creep Recovery in SiC Whisker-Reinforced Alumina Composites Academic Article
Investigation of RNA structure-switching aptamers in tunable sol–gel-derived materials Academic Article
Investigation of dislocation mobilities in germanium in the low-temperature range byin situstraining experiments Academic Article
Investigation of laminar partially premixed methane-air counterflow flames Conference Paper
Investigation of solute/interphase interaction during ferrite growth Academic Article
Investigation of ultrasonic copper wire wedge bonding on Au/Ni plated Cu substrates at ambient temperature Academic Article
Investigation of whisker orientation in SiC whisker-reinforced alumina composites using neutron diffraction Academic Article
Investigation on Mechanism of Ductile Fracture of AA5754 Sheet Conference Paper
Investigation on characteristic of J integral parameter in welded joints Academic Article
Investigation on the crystallography of reverted structure and its effect on the properties of low carbon steel Academic Article
Investigation on the crystallography of the transformation products of reverted austenite in intercritically reheated coarse grained heat affected zone Academic Article
Investigation on the microstructure and toughness of coarse grained heat affected zone in X-100 multi-phase pipeline steel with high Nb content Academic Article
Investigations of White Layer Formation During Machining of Powder Metallurgical Ni-Based ME 16 Superalloy Academic Article
In Situ Observation of Solidification Phenomena Academic Article
Ion-beam mixing of Ni/Pd layers: I. Cascade mixing regime (low temperature) Academic Article
Ion-beam mixing of Ni/Pd layers: II. Thermally assisted regime (>500K) Academic Article
Ionic conductivity and thermal analysis of a high-temperature polymer Academic Article
Irradiation hardening by interstitial loops: atomistic study and micromechanical model Conference Paper
Irreversible thermodynamics modelling of plastic deformation of metals Academic Article
Iso-work Increment Assumption for Heterogeneous Material Behaviour Modelling Academic Article
Iso-work increment assumption for heterogeneous material behavior modelling Academic Article
Isothermal growth kinetics of bainite in 0.5% C steels Academic Article
Isotopic effects and corrosion of materials Academic Article
Isotropic and kinematic hardening of a high entropy alloy Academic Article
JOM Journal
Jinshu Rechuli/Heat Treatment of Metals Journal
Journal Wuhan University of Technology, Materials Science Edition Journal
Journal of Alloys and Compounds Journal
Journal of Central South University of Technology (English Edition) Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology) Journal
Journal of Ceramic Processing Research Journal
Journal of Composite Materials Journal
Journal of Electroceramics Journal
Journal of Engineering Materials and Technology, Transactions of the ASME Journal
Journal of Failure Analysis and Prevention Journal
Journal of Harbin Institute of Technology (New Series) Journal
Journal of Intelligent Material Systems and Structures Journal
Journal of Light Metals Journal
Journal of Materials Engineering and Performance Journal
Journal of Materials Processing Technology Journal
Journal of Materials Research Journal
Journal of Materials Science Interface Science Journal of Materials Science Letters Journal
Journal of Materials Science and Technology Journal
Journal of Metals Journal
Journal of Metastable and Nanocrystalline Materials Journal
Journal of Phase Equilibria and Diffusion Journal of Phase Equilibria Journal
Journal of Reinforced Plastics and Composites Journal
Journal of Sandwich Structures and Materials Journal
Journal of Sol-Gel Science and Technology Journal
Journal of the American Ceramic Society Journal
Journal of the European Ceramic Society Journal
Key Engineering Materials Mechanical and corrosion properties. Series A, Key engineering materials Journal
Kinetic modelling of diffusion-controlled, two-phase moving interface problems Academic Article
Kinetic phase field parameters for the Cu–Ni system derived from atomistic computations Academic Article
Kinetic transitions during non-partitioned ferrite growth in Fe–C–X alloys Academic Article
Kinetics and Microstructural Aspects of Recovery in Al, Al-Mg and Al-Mn Alloys Conference Paper
Kinetics and Microstructural Aspects of the Coupling between Deformation at the Austenitic State and Ferrite Transformation in Carbon Steels Conference Paper
Kinetics and microstructural change of low-carbon bainite due to vanadium microalloying Academic Article
Kinetics and statistics of jerky flow: experiments and computer simulations Conference Paper
Kinetics of Delta-Ferrite to Austenite Phase Transformation in a Two-Phase Fe-Al-C Alloy Academic Article
Kinetics of bainite transformation in heterogeneous microstructures Academic Article
Kinetics of grain boundary segregation during recrystallisation annealing Academic Article
Kinetics of heterogeneous dislocation precipitation of NbC in alpha-iron Academic Article
Kinetics of heterogeneous grain boundary precipitation of NbC in α-iron: A Monte Carlo study Academic Article
Kinetics of multilayer homogenization via coupled grain boundary diffusion and migration: Discontinuous homogenization Academic Article
Kinetics of the reactions between silica and alumino-silicate refractories and molten iron Academic Article
Knowledge Management for Materials Processing Academic Article
Knowledge-Based Systems for Selecting Joining Processes Academic Article
LARGE-STRAIN DEFORMATION OF A COPPER TUNGSTEN COMPOSITE SYSTEM .1. STRAIN DISTRIBUTIONS (VOL 69, PG 645, 1994) Academic Article
LaCrSb₃: A New Itinerant Electron Ferromagnet with a Layered Structure Academic Article
Large Strain Deformation of Al-Cu Solid Solutions Using Channel-Die Compression Conference Paper
Large deformation of magnesium sheet at room temperature by preform annealing part I: Uniaxial tension Academic Article
Large deformation of magnesium sheet at room temperature by preform annealing, part II: “Bending” Academic Article
Large magnetic entropy change and magnetic phase transitions in rapidly quenched bulk Mn-Fe-P-Si alloys Academic Article
Large strain behaviour of aluminium sheets subjected to in-plane simple shear Academic Article
Large strain deformation of a copper—tungsten composite system. I. Strain distributions Academic Article
Large strain deformation of a copper—tungsten composite system. II. Applications Academic Article
Laser Alloying as an Effective Way to Fabricate NiTiPt Shape Memory Alloys Academic Article
Laser joining of NiTi to Ti6Al4V using a Niobium interlayer Academic Article
Laser powder bed fusion of functionally graded bi-materials: Role of VC on functionalizing AISI H13 tool steel Academic Article
Laser powder bed fusion processability of Ti-6Al-4V powder decorated by B4C particles Academic Article
Laser weldability of Pt and Ti alloys Academic Article
Laser welded superelastic Cu–Al–Mn shape memory alloy wires Academic Article
Laser welding of Cu-Al-Be shape memory alloys: Microstructure and mechanical properties Academic Article
Laser welding of H-phase strengthened Ni-rich NiTi-20Zr high temperature shape memory alloy Academic Article
Laser welding of precipitation strengthened Ni-rich NiTiHf high temperature shape memory alloys: Microstructure and mechanical properties Academic Article
Laser welding-brazing of NiTi/304 stainless steel wires with beam defocus and large offset Academic Article
Laser welding/brazing of 5182 aluminium alloy to ZEK100 magnesium alloy using a nickel interlayer Academic Article
Latent hardening effect under self- and coplanar dislocation interactions in Mg single crystals Academic Article
Latent hardening effects in low cycle fatigue of copper single crystals Academic Article
Lattice correspondence during twinning in hexagonal close-packed crystals Academic Article
Lattice strain measurements using synchrotron diffraction to calibrate a micromechanical modeling in a ferrite–cementite steel Academic Article
Layer-by-layer and step-flow growth mechanisms in GaAsP/GaP nanowire heterostructures Academic Article
Layered Lithium Vanadium Fluorophosphate, Li₅V(PO₄)₂F₂: A 4 V Class Positive Electrode Material for Lithium-Ion Batteries Academic Article
Layering misalignment and negative temperature dependence of interfacial free energy of B2-liquid interfaces in a glass forming system Academic Article
Light iron and hard magnesium nanocomposites Academic Article
Light–Matter Interaction in Quantum Confined 2D Polar Metals Academic Article
Linear spinodal decomposition in a regular ternary alloy Academic Article
Linear stability analysis of phase separation in nanoscale systems Academic Article
Link between Microstructure and Mechanical Behavior of Double Annealed Medium Mn Steel Academic Article
Liquid Atomic Structure and Viscosity of Al-Si Alloys with and without Sr Conference Paper
Liquid channel segregation and morphology and their relation with hot cracking susceptibility during columnar growth in binary alloys Academic Article
Liquid film migration in a Mo(Ni) bicrystal Academic Article
Liquid metal embrittlement cracking behavior in iron-zinc (Fe/Zn) couple: Comparison of ferritic and austenitic microstructures Academic Article
Liquid metal embrittlement in laser beam welding of Zn-coated 22MnB5 steel Academic Article
Liquid metal embrittlement in laser lap joining of TWIP and medium-manganese TRIP steel: The role of stress and grain boundaries Academic Article
Liquid- solid interface migration at grain boundary regions during transient liquid phase brazing Academic Article
Liquid–liquid extraction of oxide particles and application in supercapacitors Academic Article
Local Structure Evolvement in MOF Single Crystals Unveiled by Scanning Transmission Electron Microscopy Academic Article
Local composition and microstructure control for multiple pseudoelastic plateau and hybrid self-biasing shape memory alloys Academic Article
Local hardness and density variation in glass substrates machined with Spark Assisted Chemical Engraving (SACE) Academic Article
Local structure and thermoelectric properties of Mg2Si0.977−Ge Bi0.023 (0.1 ⩽x⩽ 0.4) Academic Article
Localized Recrystallization in Cast Al-Si-Mg Alloy during Solution Heat Treatment: Dilatometric and Calorimetric Studies Conference Paper
Long- and Short-Range Constraints for the Structure Determination of Layered Silicates with Stacking Disorder Academic Article
Long-Range Antiferromagnetic Ordering in the Novel Magnetically Frustrated Rock Salt Oxide System: Li₃Mg₂RuO₆ Academic Article
Low and Intermediate Energy Positron Backscattering Conference Paper
Low cycle fatigue behavior of a semi-solid processed AM60B magnesium alloy Academic Article
Low shear rate behavior at high solid fractions of partially solidified Al–8 wt.% Cu alloys Academic Article
Low strain plasticity in a particulate metal matrix composite Academic Article
Low temperature sintering-bonding through in-situ formation of Ag nanoparticles using micro-scaled Ag2O composite paste Academic Article
Low temperature sintering-bonding using mixed Cu+Ag nanoparticle paste for packaging application Academic Article
Low weight steel-magnesium composites achieved by powder compaction Academic Article
Low-Temperature Structure and Magnetic Properties of the Spinel LiMn₂O₄: A Frustrated Antiferromagnet and Cathode Material Academic Article
Low-temperature dynamic precipitation in a supersaturated AI-Zn-Mg alloy and related strain hardening Academic Article
Low-temperature synthesis of manganese oxide–carbon nanotube-enhanced microwave-absorbing nanocomposites Academic Article
MULTIAXIAL CHARACTERIZATION OF ROCK AND CONCRETE Conference Paper
MXene (Ti3C2Tx) anodes for asymmetric supercapacitors with high active mass loading Academic Article
Machine-able Yttria Stabilized Zirconia Composites for Thermal Insulation in Nuclear Reactors Academic Article
Macroporous Monolithic Methylsilsesquioxanes Prepared by a Two-Step Acid/Acid Processing Method Academic Article
Macroscopic kinetics of discontinuous precipitation in a Mg-8.5 wt% Al alloy Academic Article
Magnesium Alloy Development for Automotive Applications Academic Article
Magnesium for future autos Academic Article
Magnetic Nanocomposites: Preparation and Characterization of Polymer-Coated Iron Nanoparticles Academic Article
Magnetic Nanosheets via Chemical Exfoliation of K_2xMn_xSn_1–xS₂ Academic Article
Magnetic Properties, Magnetocaloric Effect, and Critical Behavior of Gd – Co – Ge Amorphous Ribbons Academic Article
Magnetic and Transport Properties of Ferromagnet NdCrSb₃ Academic Article
Magnetic and structural properties of Co2MnSi based Heusler compound Academic Article
Magnetic ordering of anti-Th3P4-type R4X3 and Th3P4-type R3X4 compounds (R = Ce, Pr, Nd, Sm, X = Ge, Sb, Te) Academic Article
Magnetic ordering of novel La3NiGe2-type R3CoGe2 compounds (R = Pr, Nd, Sm, Gd–Dy) Academic Article
Magnetic properties and magnetocaloric effect of Sc2CoSi2-type Gd2CoSi2 and Gd2CoGe2 compounds Academic Article
Magnetic properties of SmCo/Cr thin films with Cr under different preparation conditions Conference Paper
Magnetic properties of SmCo/Fe/SmCo trilayer films Conference Paper
Magnetic properties of Th3P4-type Tb4Sb3−X{Si, Ge, Bi}X solid solutions Academic Article
Magnetic properties of Tl9LnTe6, Ln=Ce, Pr, Tb and Sm Academic Article
Magnetic transitions in the Gd5Si4−xPx (x=0.5, 0.75, 1.25) phases. Magnetocaloric effect of the Gd5Si2.75P1.25 phase Academic Article
Magnetism and the magnetic structure of the pillared perovskite, La5Re3MnO16 Academic Article
Magneto-Thermal Metrics Can Mirror the Long-Term Intracellular Fate of Magneto-Plasmonic Nanohybrids and Reveal the Remarkable Shielding Effect of Gold Academic Article
Manganese dioxide–carbon nanotube composite electrodes with high active mass loading for electrochemical supercapacitors Academic Article
Manganese dioxide–carbon nanotube nanocomposites for electrodes of electrochemical supercapacitors Academic Article
Manganese oxide films for electrochemical supercapacitors Academic Article
Manufacturing clad products by spray forming Conference Paper
Manufacturing of polypyrrole-FeOOH supercapacitors Academic Article
Manufacturing uncertainties and resulting robustness of optimized patch positions on continuous-discontinuous fiber reinforced polymer structures Academic Article
Martensite tempering kinetics: Effects of dislocation density and heating rates Academic Article
Material Loss and High Temperature Phase Transition in Lithium Ferrite Academic Article
Material flow and microstructural evolution during friction stir spot welding of AZ31 magnesium alloy Academic Article
Materials Assessment for the Canadian SCWR Core Concept Academic Article
Materials Characterization Journal
Materials Chemistry and Physics Journal
Materials Design for Acoustic Liners: an Example of Tailored Multifunctional Materials Academic Article
Materials Design in Micro/Nano-Joining Academic Article
Materials Forum Journal
Materials Letters Journal
Materials Research Bulletin Journal
Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing Journal
Materials Science and Technology Journal
Materials Screening for Sol–Gel-Derived High-Density Multi-Kinase Microarrays Academic Article
Materials Selection for Optimal Design of a Porous Radiant Burner for Environmentally Driven Requirements Academic Article
Materials Selection for a Finite Life Time Academic Article
Materials Technology Advanced Performance Materials Journal
Materials Today Journal
Materials Transactions Transactions of the Japan Institute of Metals Journal
Materials and Design Journal
Materials and Manufacturing Processes Journal
Materials and Process Selection - An Integrated Approach Academic Article
Materials and Process Selection from Teaching to Research and Back: the Rhone Alpes Experience Academic Article
Materials and process selection Academic Article
Materials and structural design for lightweight primary mirrors Conference Paper
Materials at High Temperatures Journal
Materialwissenschaft und Werkstofftechnik Journal
Mathematical model of phase transformations and elastoplastic stress in the water spray quenching of steel bars Academic Article
Mathematical modeling and computer simulation of molten aluminum cleansing by the rotating impeller degasser Academic Article
Mathematical prediction of dislocation cell sizes with strain using the mesh-length theory of work hardening Academic Article
Measurement of 3-D Strain Distribution by means of High-Resolution X-ray CT Image and Tracking of Microstructural Features Academic Article
Measurement of the solubility of hydrogen in solid magnesium Academic Article
Mechanical Behavior of Carbide-free Medium Carbon Bainitic Steels Academic Article
Mechanical Behaviour of Metallic Hollow Spheres Foam Conference Paper
Mechanical Properties and Microstructural Evolution of Friction-Stir-Welded Thin Sheet Aluminum Alloys Academic Article
Mechanical Properties of Ausformed Carbide-Free Bainite Academic Article
Mechanical Properties of Monofilament Entangled Materials Academic Article
Mechanical alloying of Cu-Al-TiO2-B2O3 mixed powders Academic Article
Mechanical and Functional Properties of Laser-Welded Ti-55.8 Wt Pct Ni Nitinol Wires Academic Article
Mechanical and structural characterization of nonsintered and sintered steel wools by x-ray tomography: Description of the techniques and validation on virtual materials Academic Article
Mechanical and tribological properties of zinc-aluminium metal-matrix composites Academic Article
Mechanical behavior and microstructural evolution in rolled Mg-3Al-1Zn-0.5Mn alloy under large strain simple shear Academic Article
Mechanical behavior of a compositionally graded 300M steel Academic Article
Mechanical properties of Mg-Sc binary alloys under compression Academic Article
Mechanical properties of dissimilar resistance spot welds of aluminum to magnesium with Sn-coated steel interlayer Academic Article
Mechanical properties of the aluminum roll-bond laminate AA5005–AA5083–AA5005 Academic Article
Mechanical property development of a 0.15C–6Mn–2Al–1Si third-generation advanced high strength steel using continuous galvanizing heat treatments Academic Article
Mechanism and preventive measures for die soldering during Al casting in a ferrous mold Academic Article
Mechanism of Anomalous Grain Formation During Controlled Diffusion Solidification Academic Article
Mechanism of Austenite Formation from Spheroidized Microstructure in an Intermediate Fe-0.1C-3.5Mn Steel Academic Article
Mechanism of Low Temperature Sintering-Bonding through In-Situ Formation of Silver Nanoparticles Using Silver Oxide Microparticles Academic Article
Mechanism of Secondary Hardening in Rapid Tempering of Dual-Phase Steel Academic Article
Mechanism of microstructure and texture evolution during shear loading of AA6063 alloys Academic Article
Mechanism of plastic void growth during superplastic flow Academic Article
Mechanism of resistance microwelding of crossed fine nickel wires Academic Article
Mechanisms and Modeling of Bake-Hardening Steels: Part II. Complex Loading Paths Academic Article
Mechanisms and kinetics of recrystallisation: A two dimensional vertex dynamics simulation Conference Paper
Mechanisms of internal friction in a cu-zn-ai shape memory alloy Academic Article
Melilite-Type Borates Bi₂ZnB₂O₇ and CaBiGaB₂O₇ Academic Article
Melt-grown sphene (CaTiSiO5) crystals Academic Article
Melting and solidification of lead nanoparticles embedded in Aluminium-Gallium matrices Academic Article
Meso-scale modelling of semi-solid deformation in aluminum foundry alloys: Effects of feeding and microstructure on hot tearing susceptibility Academic Article
Metal Science and Heat Treatment Metallovedenie i Termicheskaya Obrabotka Metallov Journal
Metal index system of drinking water quality standards Academic Article
Metal to Semimetal Transition in CaMgSi Crystals Grown from Mg−Al Flux Academic Article
Metal–Metal Bonding Process Using Cu+Ag Mixed Nanoparticles Academic Article
Metal-insulator transitions in La1-xTiO3, 0.0 .ltoreq. x .ltoreq. 0.33. structure-property correlations Academic Article
Metal-insulator transitions in La1-xTiO3, 0.0 .ltoreq. x .ltoreq. 0.33. structure-property correlations. [Erratum to document cited in CA121:268723] Academic Article
Metallurgia Italiana Journal
Metallurgical analysis of magnetic pulse welds of AZ31 magnesium alloy Academic Article
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science) Journal
Metallurgical characterization of coupled carbon diffusion and precipitation in dissimilar steel welds Academic Article
Metals and Materials International Metals and Materials (Institute of Metals) Journal
Method to decode stress-strain diagrams to identify the structure-strength relationships in aged aluminum alloys Academic Article
Mg alloy infiltrated Si–O–C ceramic foams Academic Article
Microelectronic Wire Bonding with Insulated Au Wire: Effects of Process Parameters on Insulation Removal and Crescent Bonding Academic Article
Micromechanical behavior and thermal stability of a dual-phase α+α’ titanium alloy produced by additive manufacturing Academic Article
Micromechanics of high-temperature damage in dual-phase stainless steel Academic Article
Micromechanisms of deformation of an austenoferritic duplex stainless steel Academic Article
Microplastic yield condition for a periodic stacking of hollow spheres Academic Article
Microporous and Mesoporous Materials Journal
Microresistance spot welding of Kovar, steel, and nickel Academic Article
Microscopic Observations on the Origin of Defects During Machining of Direct Aged (DA) Inconel 718 Superalloy Academic Article
Microscopical study of the formation of adiabatic shear bands in 4340 steel during dynamic loading Academic Article
Microstructural Aspects of Damage and Fracture in AZ31 Sheet Materials Academic Article
Microstructural Design for Advanced Structural Steels Conference Paper
Microstructural Evolution During Deformation of a QP980 Steel Academic Article
Microstructural Evolution in Annealed and Crept Silicon Nitride Academic Article
Microstructural Evolution of Radiation Induced Defects In ZnO During Isochronal Annealing Conference Paper
Microstructural Evolution of Radiation-Induced Defects in Semi-Insulating SiC During Isochronal Annealing Conference Paper
Microstructural aspects of Cu–Ag produced by the Taylor wire method Academic Article
Microstructural aspects of superplastic deformation of Al2O3/ZrO2 laminate composites Academic Article
Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions Academic Article
Microstructural characteristics in α phase during superplastic deformation of Ti6Al4V Academic Article
Microstructural characteristics of forged and heat treated Inconel-718 disks Academic Article
Microstructural characterization and mechanical properties of nano-scale/sub-micron TiB-reinforced titanium matrix composites fabricated by laser powder bed fusion Academic Article
Microstructural characterization and phase analysis of new pyrochlore-type mixed metal oxides RESmTi2O7 (RE = Gd, Er) by X-ray powder diffraction using Rietveld refinement method and spectroscopic studies Academic Article
Microstructural characterization of a microwave-sintered silicon nitride based ceramic Academic Article
Microstructural characterization of transformable Fe–Mn alloys at different length scales Academic Article
Microstructural design for damage tolerance in high strength steels Academic Article
Microstructural evolution and grain boundary sliding in a superplastic magnesium AZ31 alloy Academic Article
Microstructural evolution and mechanical behaviour of Fe-30Mn-C steels with various carbon contents Academic Article
Microstructural evolution and stability of (Fe1−xVx)3Al alloys in relation to the electronic structure Conference Paper
Microstructural evolution and strain hardening of Fe–24Mn and Fe–30Mn alloys during tensile deformation Academic Article
Microstructural evolution during recovery in Al–2.5%Mg alloys Academic Article
Microstructural evolution of adiabatic shear bands in pure copper during impact at high strain rates Academic Article
Microstructural evolution of sol-gel-derived phosphosilicate gel with heat treatment Academic Article
Microstructural features controlling the deformation and recrystallization behaviour Fe–30%Mn and Fe–30%Mn–0.5%C Academic Article
Microstructural investigation of D2 tool steel during rapid solidification Academic Article
Microstructural simulation of adiabatic shear band formation in AISI 4340 steel using Voronoi Tessellation Academic Article
Microstructural study of Ti50Pd50 and Ti50Ni50−xPdx alloys produced by combustion synthesis Conference Paper
Microstructure Characterization and Thermal Analysis of Aluminum Alloy B206 During Solidification Academic Article
Microstructure Correlation with Formability for Biaxial Stretching of Magnesium Alloy AZ31B at Mildly Elevated Temperatures Academic Article
Microstructure Evolution during Roller Hemming of AZ31B Magnesium Sheet Conference Paper
Microstructure Instability of Candidate Fuel Cladding Alloys: Corrosion and Stress Corrosion Cracking Implications Academic Article
Microstructure Refinement After the Addition of Titanium Particles in AZ31 Magnesium Alloy Resistance Spot Welds Academic Article
Microstructure analysis of AZ31 magnesium alloy welds using phase-field models Academic Article
Microstructure and Abrasive Wear of Binderless Carbides Academic Article
Microstructure and Mechanical Properties of A 6063 Aluminium Alloy at High Temperature Conference Paper
Microstructure and Mechanical Properties of Fiber-Laser-Welded and Diode-Laser-Welded AZ31 Magnesium Alloy Academic Article
Microstructure and Mechanical Properties of Resistance Spot Welded Advanced High Strength Steels Academic Article
Microstructure and Tensile Properties of Squeeze Cast Magnesium Alloy AM50 Academic Article
Microstructure and Texture Evolution During Hot-Pack Rolling of Nickel-Base Superalloys to Thin Sheet and Foil Academic Article
Microstructure and dynamic tensile characteristics of dissimilar fiber laser welded advanced high strength steels Academic Article
Microstructure and fatigue performance of single and multiple linear fiber laser welded DP980 dual-phase steel Academic Article
Microstructure and fatigue properties of Mg-to-steel dissimilar resistance spot welds Academic Article
Microstructure and fatigue properties of fiber laser welded dissimilar joints between high strength low alloy and dual-phase steels Academic Article
Microstructure and mechanical properties of SiC Whisker reinforced ZrO₂–Y₂O₃composites Academic Article
Microstructure and mechanical properties of SiC whisker reinforced ZrO₂–6 mol.-%Y₂O₃composites Academic Article
Microstructure and mechanical properties of a 2091 AlLi alloy—I. Microstructure investigated by SAXS and TEM Academic Article
Microstructure and mechanical properties of a 2091 AlLi alloy—II. Mechanical properties: Yield stress and work hardening Academic Article
Microstructure and mechanical properties of a 2091 AlLi alloy—III. Quantitative analysis of portevin le chatelier instabilities and relation to toughness in AlLi, AlCuMg and AlLiCuMg (2091) alloys Academic Article
Microstructure and mechanical properties of a mixed Si–Al TRIP-assisted steel subjected to continuous galvanizing heat treatments Academic Article
Microstructure and mechanical properties of fibre laser welded medium manganese TRIP steel Academic Article
Microstructure and mechanical properties of laser welded DP600 steel joints Academic Article
Microstructure and mechanical properties of laser welded dissimilar DP600/DP980 dual-phase steel joints Academic Article
Microstructure and mechanical properties of laser welded dissimilar joints between QP and boron alloyed martensitic steels Academic Article
Microstructure and mechanical properties of resistance spot welded AZ31/AA5754 using a nickel interlayer Academic Article
Microstructure and mechanical properties of weld-bonded and resistance spot welded magnesium-to-steel dissimilar joints Academic Article
Microstructure and properties of 13Cr5Ni1Mo0.025Nb0.09V0.06N super martensitic stainless steel Academic Article
Microstructure and tensile properties of thixomolded magnesium alloys Academic Article
Microstructure and wear resistance of laser clad TiC particle reinforced coating Academic Article
Microstructure based modeling for the mechanical behavior of ferrite–pearlite steels suitable to capture isotropic and kinematic hardening Academic Article
Microstructure complexities of laser impact welded Al-Ti bonding interface Academic Article
Microstructure evolution of Mg-3%Al-1%Zn alloy tube during warm bending Academic Article
Microstructure modification and bendability improvement of AZ31 magnesium sheet by bending–unbending and annealing process Academic Article
Microstructure modifications induced by a laser surface treatment in an AA7449 aluminium alloy Academic Article
Microstructure of the Ti3Al(Nb)/TiB composite produced by combustion synthesis Academic Article
Microstructure refinement of dual-phase steels with 3.5wt% Mn: Influence on plastic and fracture behavior Academic Article
Microstructure, Intermetallic Phases, and Fractography of the Cast Al-5.8Zn-2.2Mg-2.5Cu Alloy by Controlled Diffusion Solidification Academic Article
Microstructure, Macrosegregation, and Thermal Analysis of Direct Chill Cast AA5182 Aluminum Alloy Academic Article
Microstructure, deformation mechanisms and influence of hydrogen on tensile properties of the Co based super alloy DIN 2.4711/UNS N30003 Academic Article
Microstructure, indentation and work hardening of Cu/Ag multilayers Academic Article
Microstructure, local and global mechanical properties of friction stir welds in aluminium alloy 6005A-T6 Academic Article
Microstructure-based finite element analysis of strain localization behavior in AA5754 aluminum sheet Academic Article
Microstructure-based modelling of isotropic and kinematic strain hardening in a precipitation-hardened aluminium alloy Academic Article
Microstructure-properties correlation in fiber laser welding of dual-phase and HSLA steels Academic Article
Microstructure-property relationship in a low carbon Nb-B bearing ultra-high strength steel by direct-quenching and tempering Academic Article
Microstructures and failure analyses of DP980 laser welded blanks in formability context Academic Article
Microstructure–hardness relationship in the fusion zone of TRIP steel welds Academic Article
Microwave-assisted hydrothermal synthesis and electrochemical characterization of niobium pentoxide/carbon nanotubes composites Academic Article
Microwelding of fused silica by femtosecond laser and the joint mechanical properties Academic Article
Misorientation development in continuous dynamic recrystallization of AZ31B alloy sheet and polycrystal plasticity simulation Academic Article
Mn3O4 and (ZnFe)OOH Composites for Supercapacitors with High Active Mass Academic Article
MoSi2-Based Sandwich Composite Made by Tape Casting Academic Article
Model Fe-Al Steel with Exceptional Resistance to High Temperature Coarsening. Part I: Coarsening Mechanism and Particle Pinning Effects Academic Article
Model Fe-Al Steel with Exceptional Resistance to High Temperature Coarsening. Part II: Experimental Validation and Applications Academic Article
Modeling Strain Localization Using a Plane Stress Two-Particle Model and the Influence of Grain Level Matrix Inhomogeneity Conference Paper
Modeling and Experimental Assessment of Bending Characteristics of Laminated Bilayer Sheet Materials Academic Article
Modeling constrained metal behavior in ceramic/metal laminates Academic Article
Modeling of Bending and Bend-Stretching of Laminated Aluminum Sheets Conference Paper
Modeling of Fatigue Damage Mechanisms of 7010 Aluminum Alloy Conference Paper
Modeling of Heat Treatment of Randomly Distributed Loads in Multi-Zone Continuous Furnaces Conference Paper
Modeling of critical grain size for shifting plasticity enhancement to decrease by refining grain size Academic Article
Modeling of mechanical twinning in a high manganese content austenitic steel Conference Paper
Modeling of oxidation-induced growth stresses Academic Article
Modeling of particle coarsening and precipitation free zones Academic Article
Modeling of the Dynamics of Transient Liquid Films in Ternary Systems Conference Paper
Modeling of the dynamics of transient liquid films in ternary systems Academic Article
Modeling of {10-12}-{10-12} secondary twinning in pre-compressed Mg alloy AZ31 Academic Article
Modeling radiation induced segregation in iron–chromium alloys Academic Article
Modeling recrystallization of microalloyed austenite: effect of coupling recovery, precipitation and recrystallization Academic Article
Modeling recrystallization of microalloyed austenite: effect of coupling recovery, precipitation and recrystallization Academic Article
Modeling the Role of Microstructure on Shear Instability with Reference to the Formability of Automotive Aluminium Alloys Conference Paper
Modeling the Stress-Strain Behavior and Hot Tearing during Direct Chill Casting of an AZ31 Magnesium Billet Academic Article
Modeling the Work Hardening Behavior of High-Manganese Steels Conference Paper
Modeling the deformation behavior of a rolled Mg alloy with the EVPSC-TDT model Academic Article
Modeling the effects of impurities on microstructure formation in nanocrystalline nickel thin films Academic Article
Modeling the formation of twins and stacking faults in the ag-cu system Academic Article
Modeling the influence of grain-level matrix inhomogeneity on strain localization in the presence of hard particles Academic Article
Modeling the influence of particulate geometry on the thermal conductivity of composites Academic Article
Modeling the interaction between creep deformation and scale growth process Academic Article
Modeling the mechanical behaviour of heterogeneous multi-phase materials Academic Article
Modelling Discontinuous Dynamic Recrystallization Using a Physically-Based Model for Nucleation Conference Paper
Modelling and Simulation in Materials Science and Engineering Journal
Modelling damage of AlZnMg alloys Academic Article
Modelling dielectric heterogeneity in electrophotography Academic Article
Modelling discontinuous dynamic recrystallization using a physically based model for nucleation Academic Article
Modelling of Damage in Particulate Metal Matrix Composites Conference Paper
Modelling of TWIP effect on work-hardening Conference Paper
Modelling of hard part machining Conference Paper
Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys Academic Article
Modelling of the Evolution of Dislocation Cell Misorientation under Severe Plastic Deformation Conference Paper
Modelling of transient liquid phase bonding Academic Article
Modelling of uniaxially pre-strained and annealed AZ31 magnesium sheet based on microstructural considerations Academic Article
Modelling strength and ductility of ultrafine grained BCC and FCC alloys using irreversible thermodynamics Academic Article
Modelling the alloy element composition change in NiTi achieved through laser induced vaporization Academic Article
Modelling the constitutive behaviour of aluminium alloy B206 in the as-cast and artificially aged states Academic Article
Modelling the effect of carbon on deformation behaviour of twinning induced plasticity steels Academic Article
Modelling the role of paper microstructure in electrophotography Academic Article
Modelling the role of slips and twins in magnesium alloys under cyclic shear Academic Article
Modelling the steady state deformation stress under various deformation conditions using a single irreversible thermodynamics based formulation Academic Article
Modelling the strength of ultrafine-grained and nanocrystalline fcc metals Academic Article
Modelling the strongest grain size in nanocrystalline FCC metals Academic Article
Modifications of standard GFRP sections shape and proportions for improved stiffness and lateral-torsional stability Academic Article
Molecular Dynamics Simulation of Sintering and Surface Premelting of Silver Nanoparticles Conference Paper
Molecular Dynamics Study of Solute Pinning Effects on Grain Boundary Migration in the Aluminum Magnesium Alloy System Academic Article
Molecular dynamic studies of the interaction of a/6⟨112⟩ Shockley dislocations with stacking fault tetrahedra in copper. Part II: Intersection of stacking fault tetrahedra by moving twin boundaries Academic Article
Molecular dynamics simulations of the crystal–melt interfacial free energy and mobility in Mo and V Conference Paper
Molecular dynamics studies of the interaction ofa/6 ⟨112⟩ Shockley dislocations with stacking fault tetrahedra in copper. Part I: Intersection of SFT by an isolated Shockley Academic Article
Molecular dynamics study of liquid metal infiltration during brazing Academic Article
Molecular dynamics study of the thermodynamic and kinetic properties of the solid-liquid interface in FeMn Academic Article
Molecular-dynamics study of solid–liquid interface migration in fcc metals Academic Article
Monitoring the Distribution of Covalently Tethered Sugar Moieties in Sol−Gel-Based Silica Monoliths with Fluorescence Anisotropy: Implications for Entrapped Enzyme Activity Academic Article
Monkman-Grant relation - Analysis of first order kinetics of creep in AISI 304 stainless steel Conference Paper
Morphological instabilities in Mg-7.7 at % Al Academic Article
Morphology and Entrapped Enzyme Performance in Inkjet-Printed Sol–Gel Coatings on Paper Academic Article
Morphology and Growth Kinetic Advantage of Quenched Twinned Dendrites in Al-Zn Alloys Academic Article
Morphology and Kinetics of Interfacial Layer Formation during Continuous Hot-Dip Galvanizing and Galvannealing Academic Article
Morphology and chemical nanoanalysis of discontinuous precipitation in MgAl alloys—I. Regular growth Academic Article
Morphology and chemical nanoanalysis of discontinuous precipitation in MgAl allyos—II. Irregular growth Academic Article
Morphology of adiabatic shear bands in cylindrical specimens of AISI 4340 steel impacted by Hopkinson pressure bar Academic Article
Morphology of cross-linked cellulose nanocrystal aerogels: cryo-templating versus pressurized gas expansion processing Academic Article
Multi-Island Genetic-Algorithm-Based Approach to Uniquely Calibrate Polycrystal Plasticity Models for Magnesium Alloys Academic Article
Multi-lattice inner structures for high-strength and light-weight in metal selective laser melting process Academic Article
Multi-objective CoFRP patch optimization with consideration of manufacturing constraints and integrated warpage simulation Academic Article
Multi-scale Examination of the Microstructure Evolution of AZ31 During Multi-pass Cross-Rolling Academic Article
Multi-scale crystal plasticity finite element method (CPFEM) simulations for shear band development in aluminum alloys Academic Article
Multi-scale morphological characterization of Ni foams with directional pores Academic Article
Multifunctional Properties of Commercial Bile Salts for Advanced Materials Engineering Academic Article
Multilevel Memory: Plasmonic-Radiation-Enhanced Metal Oxide Nanowire Heterojunctions for Controllable Multilevel Memory (Adv. Funct. Mater. 33/2016) Academic Article
Multiple Memory Shape Memory Alloys Academic Article
Multiscale Analysis of the Strength and Ductility of AA 6056 Aluminum Friction Stir Welds Academic Article
Multiscale Modeling of Phase Transformations in Steels Academic Article
Multiscale characterization of dislocation processes in Al 5754 Academic Article
Multivariate-aided mapping of rare-earth partitioning in a wrought magnesium alloy Academic Article
Nano-aluminum-phosphate via a polymerized organic–inorganic complex route Academic Article
Nano-sized precipitation and properties of a low carbon niobium micro-alloyed bainitic steel Academic Article
Nano-twinned steel exhibits high mechanical properties obtained through ultra-rapid heat treatment Academic Article
Nanocellulose as a natural source for groundbreaking applications in materials science: Today’s state Academic Article
Nanocrystalline diamond films prepared by pulsed electron beam ablation on different substrates Academic Article
Nanoindentation and microstructure analysis of resistance spot welded dual phase steel Academic Article
Nanostructuration via solid state transformation as a strategy for improving the thermoelectric efficiency of PbTe alloys Academic Article
Nanostructure of immiscible Mg–Fe dissimilar weld without interfacial intermetallic transition layer Academic Article
Nanostructure-Dependent Vertical Charge Transport in MEH-PPV Films Academic Article
Nanostructure-Dependent Vertical Charge Transport in MEH-PPV Films Academic Article
Nanostructure-dependent vertical charge transport in MEH-PPV films (Advanced Functional Materials (2007) 17 (2902)) Academic Article
Nanostructured ceramic and hybrid materials via electrodeposition Academic Article
Nanostructured materials for energy storage Academic Article
Nanostructured steel with high work-hardening by the exploitation of the thermal stability of mechanically induced twins Academic Article
Natural frequencies of symmetrically laminated rectangular plates with free edges Academic Article
Nature and distribution of quench-induced precipitation in an Al-Zn-Mg-Cu Alloy Academic Article
Nature of Impurities in .pi.-Conjugated Polymers Prepared by Ferric Chloride and Their Effect on the Electrical Properties of Metal-Insulator-Semiconductor Structures Academic Article
NbC precipitation during multi-pass deformation of a nickel-based model alloy: Experiments and modelling Academic Article
NbC precipitation during two-pass hot deformation of a nickel-based model alloy at 700 °C: Experiments and modelling Academic Article
Near-ideal compressive strength of nanoporous silver composed of nanowires Academic Article
New Ceramic Seal for Na/NiCl₂Cells Academic Article
New analysis of peeling data from paper Academic Article
New compounds RE5Ni2Sb (RE = Y, Tb, Dy, Ho, Er, Lu), Ho5Pd2Sb and their crystal structure Academic Article
New crystal plasticity constitutive model for large strain deformation in single crystals of magnesium Academic Article
New developments in electrolytic deposition of ceramic films Academic Article
New insight into crack formation during corrosion of zirconium-based metal-oxide systems Academic Article
New insights into martensite strength and the damage behaviour of dual phase steels Academic Article
New insights into the limit for non-partitioning ferrite growth Academic Article
New insights into the mechanism of cooling rate on the impact toughness of coarse grained heat affected zone from the aspect of variant selection Academic Article
New insights on the laser powder bed fusion processing of a NiTi alloy and the role of dynamic restoration mechanisms Academic Article
New insights to the effects of ausforming on the bainitic transformation Academic Article
New microstructural model of polymer-ceramic nanocomposite materials Academic Article
New process of electroplate Sn bumping on TSV without a PR mould for 3D-chip stacking Academic Article
New ternary Yb5Sb3-type R5PtX2 compounds (R = Y, Gd and Er; X = Sb and Bi) and their magnetic properties Academic Article
New ternary Yb5Sb3-type R5T1−x{Sb, Bi}2+x phases (R = Y, Dy, Ho, T = Co, Ru, Rh, Pd) and their magnetic properties Academic Article
Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals Journal
Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan Journal
Non-destructive 3-D reconstruction of the martensitic phase in a dual-phase steel using synchrotron holotomography Academic Article
Non-destructive evaluation of laminated composite plates using dielectrometry sensors Academic Article
Non-supercritical drying synthesis and characterization of monolithic alumina aerogel from secondary aluminum dross Academic Article
Noteworthy: Innovations - Novel crystals formed in magnetic furnace Academic Article
Novel Approach to Model Static Recrystallization of Austenite during Hot-Rolling of Nb-Microalloyed Steel: Effect of Precipitates Conference Paper
Novel High-Performance Liquid-Crystalline Organic Semiconductors for Thin-Film Transistors Academic Article
Novel Incipient Ferroelectrics Based on Ba₄MNb_xTa_10–xO₃₀ where M = Zn, Mg, Co, Ni Academic Article
Novel Two-Photon Absorbing Dendritic Structures Academic Article
Novel functional graphene and its thermodynamic interfacial localization in biphasic polyolefin systems for advanced lightweight applications Academic Article
Novel method to analyse tensile properties of ultra-fine NiTi wires with a visual extensometer Academic Article
Nucleation and propagation of {101¯2} twins in AZ31 magnesium alloy Academic Article
Nucleation mechanism of discontinuous precipitation in MgAl alloys and relation with the morphology Academic Article
Nucleation mechanism of the eutectic phases in aluminum–silicon hypoeutectic alloys Academic Article
Nucleation of recrystallization in fine-grained materials: an extension of the Bailey–Hirsch criterion Academic Article
Numerical Assessment of the Role of Slip and Twinning in Magnesium Alloy AZ31B During Loading Path Reversal Academic Article
Numerical Modeling of Second-Phase Particle Effects on Localized Deformation Academic Article
Numerical Modeling of the Failure of Magnesium Tubes Under Compressive Loading Academic Article
Numerical Modelling of Large-Strain Phenomena in Polycrystalline Solids Conference Paper
Numerical Simulation of Blown Film Cooling Conference Paper
Numerical Simulations and Experimental Results of Tensile Test Behavior of Laser Butt Welded DP980 Steels Academic Article
Numerical formability assessment in single crystals of magnesium Academic Article
Numerical investigation and experimental validation of physically based advanced GTN model for DP steels Academic Article
Numerical model for the effect of grain boundaries on the total amount diffused Academic Article
Numerical modelling of the evolution of the architecture of trabecular bone: damage accumulation and failure Academic Article
Numerical prediction of the limiting draw ratio for aluminum alloy sheet Academic Article
Numerical simulation of early stages of oxide formation in molten aluminium–magnesium alloys in a reverberatory furnace Academic Article
Numerical simulation of the pressure ram forming process Academic Article
Numerical study of large strain behavior of OFHC copper: The role of latent hardening Academic Article
Numerical study of surface roughening in blow-formed aluminum bottle with crystal plasticity Academic Article
Numerical study on the effect of electrode force in small-scale resistance spot welding Academic Article
OBSERVATION OF PHYSICOCHEMICAL BEHAVIOR OF FORMED-COKE Conference Paper
ON THE TENSILE FRACTURE OF ALUMINIUM ALLOYS. Academic Article
Observation of kink shear bands in an aluminium single crystal fracture specimen Academic Article
Observation of void nucleation, growth and coalescence in a model metal matrix composite using X-ray tomography Academic Article
Occurrence of sub-critical heat affected zone liquid metal embrittlement in joining of advanced high strength steel Academic Article
On Alternative Representation of Forming Limits Conference Paper
On Excess Gibbs Energies and Aphysical Formalisms Academic Article
On J Integral as Fracture Parameter in Heterogeneous Welded Joints Conference Paper
On Poisson's ratio of glass and liquid vitrification characteristics Academic Article
On attempts to make the interaction parameter formalism thermodynamically consistent Academic Article
On ball-milled ODS ferritic steel recrystallization: From as-milled powder particles to consolidated state Academic Article
On choosing a reference surface for a two-sublattice model Academic Article
On dislocation storage and the mechanical response of fine scale microstructures Academic Article
On dislocation storage and the mechanical response of fine scale microstructures. Academic Article
On grain boundary facetting under stress during high temperature deformation of Al and Al-Ga alloys Conference Paper
On ledge mobility in invariant-line diffusional phase transformations Academic Article
On measurement of retained austenite in multiphase TRIP steels — results of blind round robin test involving six different techniques Academic Article
On network descriptions of mechanical and optical properties of rubbers Academic Article
On particle size effects: An internal length mean field approach using field dislocation mechanics Academic Article
On plastic strain distribution and texture development in fiber composites Academic Article
On selective laser melting of Inconel 718: Densification, surface roughness, and residual stresses Academic Article
On the Calculation of Volume Fraction of Texture Components in AA5754 Sheet Materials Academic Article
On the Decarburization of Surface Pearlite Academic Article
On the Nucleation of Abnormal Grain Growth: A 2D Vertex Simulation Conference Paper
On the Relations between Portevin Le Châtelier Plastic Instabilities and Precipitation Conference Paper
On the Study of the Sheet Bendability in AA5754-O Temper Alloy Academic Article
On the Swift effect and twinning in a rolled magnesium alloy under free-end torsion Academic Article
On the activation of recrystallization nucleation sites in Cu and Fe Academic Article
On the analysis of delamination fractures in high-strength steels Academic Article
On the coarsening of precipitates located on grain boundaries and dislocations Academic Article
On the competition between continuous and discontinuous precipitations in binary MgAl alloys Academic Article
On the competition between particle fracture and particle decohesion in metal matrix composites Academic Article
On the damage and fracture of commercially pure magnesium using x-ray microtomography Academic Article
On the direct nucleation and growth of ferrite and cementite without austenite Academic Article
On the effect of pre-recovery on subsequent recrystallization Academic Article
On the essential work of fracture in polymer–metal multilayers Academic Article
On the fabricability of a composite material containing the FCC matrix with embedded ductile B2 intermetallics Academic Article
On the formation of intermetallics in rapidly solidifying Al–Fe–Si alloys Academic Article
On the hot embrittlement of continuously-cast and transfer-bar structures in DP600 advanced high-strength steel Academic Article
On the influence of dislocations on precipitation in an Al-Zn-Mg alloy Academic Article
On the influence of non-steady state velocity on interlamellae concentration profiles in discontinuous precipitation Academic Article
On the influence of precipitation on the Portevin-Le Chatelier effect Academic Article
On the kinetics of interface-diffusion-controlled peritectoid reactions Academic Article
On the kinetics of surface alloying by grain boundary migration Academic Article
On the mechanisms of dynamic recovery Academic Article
On the origin of short wave length thickness variations of strips in melt overflow casting Academic Article
On the rapid hardening and exhaustion of twinning in magnesium alloy Academic Article
On the relationship between microstructure, strength and toughness in AA7050 aluminum alloy Academic Article
On the role of interphase strain in solid-solid phase transformations: Ice clathrates and hexagonal ice Academic Article
On the sequence of inhomogeneous deformation processes occurring during tensile deformation of strip cast AA5754 Academic Article
On the stability of amorphous silica coatings for high-temperature service Academic Article
On the stability of cold drawn, two-phase wires Academic Article
On the thermodynamic stability of intermetallic phases in the AA6111 aluminum alloy Conference Paper
On the thermomechanical behavior of two-dimensional foam/metal joints with shear-deformable adherends – Parametric study Academic Article
On velocity and spacing selection in discontinuous precipitation—I. Simplified analytical approach Academic Article
Onset of void coalescence in uniaxial tension studied by continuous X-ray tomography Academic Article
Optical and Electrical Characteristics of InGaAsP MQW BH DFB Laser Diodes Conference Paper
Optical biosensors utilizing graphene and functional DNA molecules Academic Article
Optical study of hybridization and hidden order in URu₂Si₂ Academic Article
Optimal Design of a Multifunctional Sandwich Panel With Foam Core: Lightweight Design for Flexural Stiffness and Acoustical Transmission Loss Academic Article
Optimization and calculation of the FeTa phase diagram Academic Article
Optimization of Sol−Gel Formulations and Surface Treatments for the Development of Pin-Printed Protein Microarrays Academic Article
Optimizing aluminum alloys: physically based modeling and materials selection Conference Paper
Optimizing piezoelectric inkjet printing of silica sols for biosensor production Academic Article
Optimizing weld morphology and mechanical properties of laser welded Al-Si coated 22MnB5 by surface application of colloidal graphite Academic Article
Order-disorder transformations in the heusler alloy Cd2AgAu Conference Paper
Organs-on-a-Chip: InVADE: Integrated Vasculature for Assessing Dynamic Events (Adv. Funct. Mater. 46/2017) Academic Article
Orientation selection in solidification patterning Academic Article
Origin of dislocations within tensile and compressive twins in pure textured Zr Academic Article
Overview of Key R&D Activities for the Development of High-Performance Magnesium Materials in Canada Conference Paper
Oxidation of ?-Ni?Al?Si alloys at 1073 K Academic Article
Oxidation of Metals Journal
Oxidation of??-Ni3Al and??-Ni3Al(Si) intermetallic compounds at low-oxygen pressures Academic Article
Oxidation resistant Ti-Al-Cr alloy for protective coating applications Academic Article
Oxide scales formation in nano-crystalline TiAlCrSiYN PVD coatings at elevated temperature Academic Article
PORE SHAPE AND GROWTH-KINETICS IN GLASS-LIKE CARBONS (GC) USING SMALL-ANGLE X-RAY-SCATTERING Conference Paper
PREFACE Academic Article
PREFACE Academic Article
Parametric Study on the Response of Stable Unbonded-Fiber Reinforced Elastomeric Isolators (SU-FREIs) Academic Article
Part deflection and residual stresses in laser powder bed fusion of H13 tool steel Academic Article
Partial pair correlation functions and viscosity of liquid Al–Si hypoeutectic alloys via high-energy X-ray diffraction experiments Academic Article
Particle incorporation by melt stirring for the production of metal-matrix composites Academic Article
Passivity of Silicon-Containing Austenitic Stainless Steel in Concentrated Sulphuric Acid Conference Paper
Pathway to understand liquid metal embrittlement (LME) in Fe-Zn couple: From fundamentals toward application Academic Article
Pb₃TeCo₃V₂O₁₄: A Potential Multiferroic Co Bearing Member of the Dugganite Series Academic Article
Percolation of single-walled carbon nanotubes in ceramic matrix nanocomposites Academic Article
Periodic table of the oxides Academic Article
Phase Evolution During Sintering of Mullite/zirconia Composites Using Silica-coated Alumina Powders Academic Article
Phase Separation in the Two-Dimensional Systems of Strongly Correlated Electrons: The Role of Spin Singlet Pairs on Hole Pairing Contribution to Hole-Rich Phase Conference Paper
Phase Separation in the Two-Dimensional Systems of Strongly Correlated Electrons: The Role of Spin Singlet Pairs on Hole Pairing Contribution to Hole-Rich Phase Chapter
Phase Transformation Behavior of Medium Manganese Steels with 3 Wt Pct Aluminum and 3 Wt Pct Silicon During Intercritical Annealing Academic Article
Phase formation of CaAl2O4 from CaCO3–Al2O3 powder mixtures Academic Article
Phase quantification of impulse atomized Al68.5Ni31.5 alloy Academic Article
Phase relations between Al2O3Cr2O3 and FeAl2O4FeCr2O4 solid solutions at 1823 K Academic Article
Phase separation and its relationship with thermoelectric properties in tin-substituted magnesium silicide synthesized from melt Academic Article
Phase transfer of oxide particles for application in thin films and supercapacitors Academic Article
Phase transfer of oxide particles using hydroxamic acid derivatives and application for supercapacitors Academic Article
Phase transformations in nickel sulphide: Microstructures and mechanisms Academic Article
Phase-field simulation of solidification morphology in laser powder deposition of Ti–Nb alloys Academic Article
Phenomenological Model for Deformation-Induced Ferrite Transformation Academic Article
Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties Philosophical Magazine Journal
Philosophical Magazine Letters Journal
Photocatalytic activity of electrophoretically deposited TiO2 and ZnO nanoparticles on fog harvesting meshes Academic Article
Photoluminescence properties, energy transfer and thermal stability of the novel red-emitting CaGd2(WO4)4:Eu3+, Sm3+ phosphors Academic Article
Photomechanical vibration energy harvesting based on liquid crystal elastomer cantilever Academic Article
Photopolymerization behavior of di(meth)acrylate oligomers Academic Article
Physical relationship between mean-field micro-mechanical approach and Orowan looping in particle-strengthened materials Academic Article
Plasmonic-Radiation-Enhanced Metal Oxide Nanowire Heterojunctions for Controllable Multilevel Memory Academic Article
Plastic Instabilities in Materials Science and in Physics Book
Plastic deformation of Al and AA5754 between 4.2K and 295K Academic Article
Plastic flow and fracture of a particulate metal matrix composite Academic Article
Plastic flow in dispersion hardened materials Academic Article
Plastic instabilities and their relation to fracture Conference Paper
Plasticity of Mg–Gd alloys between 4 K and 298 K Academic Article
Point Defects in ZnO:Mn and Their Relation to Luminescence Centres Academic Article
Poly(3,3‘ ‘-dialkylterthiophene)s: Room-Temperature, Solution-Processed, High-Mobility Semiconductors for Organic Thin-Film Transistors Academic Article
Polycrystal plasticity simulation of extrusion of a magnesium alloy round bar: Effect of strain path non-uniformity Academic Article
Polyfluorene-Sorted Semiconducting Single-Walled Carbon Nanotubes for Applications in Thin-Film Transistors Academic Article
Polymer Based Nanocomposites: Effect of Filler-Filler and Filler-Matrix Interactions Academic Article
Polymer derived ceramics reinforced with Ti3SiC2 coated SiC fibers: A feasibility study Academic Article
Polymer processing Academic Article
Polymers and organic materials-based pH sensors for healthcare applications Academic Article
Polypyrrole coated carbon nanotubes for supercapacitors, prepared using indigo carmine as a dispersant and dopant Academic Article
Polysiloxane-derived ceramic foam for the reinforcement of Mg alloy Academic Article
Porosity Formation Mechanism in Laser Spot Microwelding of Pt-Ir Alloy and 316L Stainless Steel Wires Academic Article
Porous nanocellulose gels and foams: Breakthrough status in the development of scaffolds for tissue engineering Academic Article
Positron Implantation Studies of YBa2Cu307-x Conference Paper
Positron implantation studies of YBa2Cu3O7-x Academic Article
Possible Charge-Density-Wave/Spin-Density-Wave in the Layered Pnictide−Oxides: Na₂Ti₂Pn₂O (Pn = As, Sb) Academic Article
Post-optimization elimination of inverted miscibility gaps Academic Article
Potential applications for steel and titanium metal foams Conference Paper
Powder Metallurgy Journal
Preceramic polymer derived cellular ceramics Academic Article
Precipitation Strengthening in AA7449 Aluminium Alloy: Understanding the Relationship between Microstructure, Yield Strength and Strain Hardening Conference Paper
Precipitation behavior in a medium carbon, ti-v-n microalloyed steel Academic Article
Precipitation effects during hot deformation of a copper alloy Academic Article
Precipitation in 339 and 2124 aluminum: a caveat for calorimetry Academic Article
Precipitation microstructures in an AA6056 aluminium alloy after friction stir welding: Characterisation and modelling Academic Article
Precipitation strengthening in high manganese austenitic TWIP steels Academic Article
Precipitation strengthening of the aluminum alloy AA6111 Academic Article
Predicting solid–liquid interfacial characteristics during rapid solidification Academic Article
Predicting the constitutive behavior of semi-solids via a direct finite element simulation: application to AA5182 Academic Article
Predicting the stress–strain behaviour of carbon steels under hot working conditions: An irreversible thermodynamics model Academic Article
Prediction of Hot Tear Formation in Vertical DC Casting of Aluminum Billets Using a Granular Approach Academic Article
Prediction of dust fall concentrations in urban atmospheric environment through support vector regression Academic Article
Prediction of shear localization during large deformation of a continuous cast Al–Mg sheet Academic Article
Prediction of solidification behaviour via microstructure models based on granular structures Conference Paper
Predictions of forming limit diagrams using crystal plasticity models Conference Paper
Predictive model for void nucleation and void growth controlled ductility in quasi-eutectic cast aluminium alloys Academic Article
Preface Academic Article
Preface to Chemistry of Materials Special Issue on The Materials Chemistry of Energy Conversion Academic Article
Preface to the viewpoint set on: deformation and stability of nanoscale metallic multilayers Academic Article
Preform cracking in squeeze cast magnesium based composites – effects of tooling temperature Academic Article
Preform cracking in squeeze casting of particulate reinforced magnesium matrix composites Academic Article
Preparation and characterization of rubidium β′' alumina Academic Article
Preparation and crystal chemistry of some rare earth vanadium (IV) pyrochlores (RE)2V2O7; RE = Lu, Yb, Tm, Lu1−xYx, Lu1−xScx Academic Article
Preparation and electromagnetic properties of Ni1−xCuxFe2O4 nanoparticle ferrites by sol–gel auto-combustion method Academic Article
Preparation and optical characterization of thick-film zirconia and titania ormosils Academic Article
Preparation of MnO₂and Composites for Ultracapacitors Academic Article
Preparation of low-temperature sinterable BaCe0.8Sm0.2O3 powder by autoignition technique Academic Article
Preparation of metal–organic framework films by electrophoretic deposition method Academic Article
Preparation of nanoparticle and nanowire mixed pastes and their low temperature sintering Academic Article
Preparation, Characterization, and Moessbauer Spectroscopy of Organic Anion Intercalated Pyroaurite-like Layered Double Hydroxides Academic Article
Preparation, cell constants, and some magnetic properties of CeScO3 Academic Article
Preparation, characterization, and some magnetic properties of Eu3VTa2O9 and Sr3VTa2O9 — New perovskites containing vanadium(II) Academic Article
Present and future thermal interface materials for electronic devices Academic Article
Pressureless bonding process using Ag nanoparticle paste for flexible electronics packaging Academic Article
Probing point defects in Ba(B1/3′B2/3″)O3 by ESR, PAS and dielectric spectroscopy Conference Paper
Probing the dynamics of domain III of human serum albumin entrapped in sol–gel derived silica using a Sudlow’s site II specific fluorescent ligand Academic Article
Probing the local atomic structure of Sr-modified Al–Si alloys Academic Article
Process and alloy selection for aluminium casting Academic Article
Processing Ceramic Superconductors Academic Article
Processing and Properties of Alumina-Graphite Platelet Composites Academic Article
Processing and microstructural characterization of Al-Cu alloys produced from rapidly solidified powders Academic Article
Processing of Tape-Cast Laminates Prepared from Fine Alumina/Zirconia Powders Academic Article
Production and concentration change of ammonia in aerobic compost Academic Article
Production of (W, Ti)C reinforced Ni–Ti matrix composites Academic Article
Progress in Materials Science Journal
Progress in dispersoids distribution precipitating during homogenising Zr-containing Al–Cu–Li and Al–Zn–Mg alloys Academic Article
Properties of Human Serum Albumin Entrapped in Sol−Gel-Derived Silica Bearing Covalently Tethered Sugars Academic Article
Properties of microinjection-molded multi-walled carbon nanotubes-filled poly(lactic acid)/poly[(butylene succinate)-co-adipate] blend nanocomposites Academic Article
Proposal for a multi-material design procedure Academic Article
Protection of Mg Alloys against Galvanic and Other Forms of Corrosion Conference Paper
Proteins Entrapped in Silica Monoliths Prepared from Glyceroxysilanes Conference Paper
Pseudo-ductile failure of adhesively joined GFRP beam-column connections: An experimental and numerical investigation Academic Article
Pseudo-portevin-le châtelier effect in ordered alloys Academic Article
Pulse Electrosynthesis of MnO₂Electrodes for Supercapacitors Academic Article
Pulsed Nd:YAG laser welding of copper using oxygenated assist gases Academic Article
Purification of metallurgical silicon using iron as an impurity getter part I: Growth and separation of Si Academic Article
Purification of metallurgical silicon using iron as impurity getter, part II: Extent of silicon purification Academic Article
Pyrolysis of Poly(ferrocenylsilanes): Synthesis and Characterization of Ferromagnetic Transition-Metal-Containing Ceramics and Molecular Depolymerization Products Academic Article
Quantification of Rapidly Solidified Microstructure of Al-Fe Droplets Using Correlation Length Analysis Academic Article
Quantification of the residual mortar content in recycled concrete aggregates by image analysis Conference Paper
Quantifying metallurgical interactions in solid/liquid diffusion couples using differential scanning calorimetry Academic Article
Quantifying the Solute Drag Effect of Cr on Ferrite Growth Using Controlled Decarburization Experiments Academic Article
Quantifying the Solute Drag Effect on Ferrite Growth in Fe-C-X Alloys Using Controlled Decarburization Experiments Academic Article
Quantitative 3D Characterization of Solidification Structure and Defect Evolution in Al Alloys Academic Article
Quantitative 3D phase field modelling of solidification using next-generation adaptive mesh refinement Academic Article
Quantitative Assessment of Deformation-Induced Damage in a Semisolid Aluminum Alloy via X-ray Microtomography Academic Article
Quantitative Experimental Study of Defects Induced by Process Parameters in the High-Pressure Die Cast Process Academic Article
Quantitative Investigation of Hot Tearing of Al-Cu Alloy (206) Cast in a Constrained Bar Permanent Mold Conference Paper
Quantitative analysis of complex carbo-nitride precipitates in steels Academic Article
Quantitative criterion for recrystallization nucleation in single-phase alloys: Prediction of critical strains and incubation times Academic Article
Quantitative evaluation of high temperature deformation mechanisms: a specific microgrid extensometry technique coupled with EBSD analysis Academic Article
Quantitative evaluation of the adhesion of bioactive glasses onto Ti6Al4V substrates Academic Article
Quantitative metallography of precipitating and secondary phases after strengthening treatment of net shaped casting of Al-Zn-Mg-Cu (7000) alloys Academic Article
Quantitative phase field modeling of solute trapping and continuous growth kinetics in quasi-rapid solidification Academic Article
Quantitative prediction of texture effect on Hall–Petch slope for magnesium alloys Academic Article
Quantum diffusion of electrons in quasiperiodic and periodic approximant lattices in the rare earth-cadmium system Academic Article
Quasistatic mechanical behaviour of stainless steel hollow sphere foam: Macroscopic properties and damage mechanisms followed by X-ray tomography Academic Article
Quaternary Gd4Ni2Sb1±xSi2±x and Gd4Ni2Bi1±xSi2±x: Crystal structure, homogeneity regions and magnetic behavior Academic Article
R-curve modeling for Ni/Al2O3 laminates Academic Article
Raman and AFM studies on nominally undoped, p- and n-type GaAsBi alloys Academic Article
Randomly oriented ZnO nanowires grown on amorphous SiO2 by metal-catalyzed vapour deposition Conference Paper
Rapid Strengthening of Interstitial Free Steel Using Amorphous FeC Thin Films and Induction Heating Academic Article
Rapid machining of hardened AISI H13 and D2 moulds, dies and press tools Conference Paper
Rare-Earth Pnictide Oxides (RE,Ca)_mPn_nO_m (Pn = Sb, Bi): A Review of Crystal Structures, Chemistry, Compositions, and Physical Properties Academic Article
Rational Procedures for Materials and Process Selection in Mechanical Design Applied to Aluminium Alloys Conference Paper
Rationalization of the softening and recrystallization behaviour of microalloyed austenite using mechanism maps Academic Article
Re-optimization of the Mg-Sb system under topological constraints Academic Article
Re-optimization of the Mg–Sb system under topological constraints Academic Article
Reactions in a multilayered Si (substrate)/Ta/Mg/Fe/Ta/Pd thin-film structure during annealing and deuterium absorption Academic Article
Reactive extrusion preparation and characterization of canola meal composites reinforced by a novel polymeric chain extender Academic Article
Reactive wetting of high Mn steels during continuous hot-dip galvanizing Academic Article
Real-Time Process Characterization of Open Die Forging for Adaptive Control Conference Paper
Recent Advances in the Application of Slow Positron Beams to the Study of Ion Implantation Defects in Silicon Book
Recent Experimental and Numerical Developments in Semisolid Deformation Academic Article
Recent advances and an industrial perspective of cellulose nanocrystal functionalization through polymer grafting Academic Article
Recent progress in microjoining and nanojoining Academic Article
Recommendations on modeling polyphase plasticity: conclusions of panel discussions Conference Paper
Reconstruction of the 3D representative volume element from the generalized two-point correlation function Academic Article
Recovery behaviour of shape memory polyurethane based laminates after thermoforming Academic Article
Recovery in Al Alloys: A 3D Simulation of Dislocations and Plasticity Book
Recovery of AlMg alloys: flow stress and strain-hardening properties Academic Article
Recovery studies of cold rolled aluminum sheet using X-ray line broadening and activation volume determinations Academic Article
Recrystallization and Grain Coarsening Control in Processing High Niobium Microalloyed Line Pipe Steels Conference Paper
Recrystallization and Texture in a Ferritic Stainless Steel: an EBSD Study Academic Article
Recrystallization and grain-growth behavior of a nickel-base superalloy during multi-hit deformation Academic Article
Recrystallization and strain accumulation behaviors of high Nb-bearing line pipe steel in plate and strip rolling Academic Article
Recrystallization induced plasticity in austenite and ferrite Academic Article
Recrystallization of stabilized ferritic stainless steel sheet Academic Article
Recrystallization, Precipitation Behaviors, and Refinement of Austenite Grains in High Mn, High Nb Steel Academic Article
Redefining the Diamond Cutting Edge: A Technique that Complements Nano-Metric Surface Generation Academic Article
Redistribution of a Grain-Boundary Glass Phase during Creep of Silicon Nitride Ceramics Academic Article
Reduced fibre breakage in a glass-fibre reinforced thermoplastic through foaming Academic Article
Reduced mobility of triple nodes and lines on grain growth in two and three dimensions Academic Article
Reduction of Defects in GaN Epitaxial Films Grown Heteroepitaxially on SiC Conference Paper
Refinement of the crystal structure of CaCrF5 Academic Article
Reinforcement of Ag nanoparticle paste with nanowires for low temperature pressureless bonding Academic Article
Relating nanoscale plasticity to bulk ductility in aluminum alloys Academic Article
Relationship Between Recrystallization Kinetics and the Inhomogeneity of Stored Energy Academic Article
Relationship between crystal structure and magnetic properties of (RE)2V2O7; RE=Lu, Yb, Tm Academic Article
Relationship between relaxation mechanisms and strain aging in an austenitic FeMnC steel Academic Article
Relaxation of thermal stresses by dislocation flow and multiplication in the continuous casting of silicon Academic Article
Removal of Si from recycled aluminium alloys Academic Article
Removal of cadmium and lead from sediment by rhamnolipid Academic Article
Reoptimization of the Ag–Mg system Academic Article
Replicating the Structure of a Crosslinked Polyferrocenylsilane Inverse Opal in the Form of a Magnetic Ceramic Academic Article
Reply Academic Article
Reply to the Comment on Spontaneously Ordered Sol−Gel Composites with Submicrometer Periodicity Article
Reply to: Comment to "electrophoretic deposition-mechanisms, myths and materials" by P.M. Biesheuvel and H. Verweij Academic Article
Research on municipal solid waste composting with coal ash Academic Article
Residual and Internal Stress States in Duplex Steel with TWIP Effect Conference Paper
Resistance Microwelding of Ti-55.8 wt pct Ni Nitinol Wires and the Effects of Pseudoelasticity Conference Paper
Resistance Spot Welded AZ31 Magnesium Alloys, Part II: Effects of Welding Current on Microstructure and Mechanical Properties Academic Article
Resistance and friction stir spot welding of DP600: a comparative study Academic Article
Resistance microwelding of 316L stainless steel wire to block Academic Article
Resistance microwelding of crossed Pt–10Ir and 316 LVM stainless steel wires Academic Article
Resistance spot weld fatigue behavior and dislocation substructures in two different heats of AZ31 magnesium alloy Academic Article
Resistance spot welding of AZ series magnesium alloys: Effects of aluminum content on microstructure and mechanical properties Academic Article
Resistance-Spot-Welded AZ31 Magnesium Alloys: Part I. Dependence of Fusion Zone Microstructures on Second-Phase Particles Academic Article
Response to the comment on ‘Time-dependent paths, fictive temperatures and residual entropy of glass’ Academic Article
Revealing dendritic pattern formation in Ni, Fe and Co alloys using synchrotron tomography Academic Article
Revealing fracture mechanisms of medium manganese steels with and without delta-ferrite Academic Article
Reversible Water Transportation Diode: Temperature‐Adaptive Smart Janus Textile for Moisture/Thermal Management Academic Article
Review of Hydrogels and Aerogels Containing Nanocellulose Academic Article
Review of Manganese Processing for Production of TRIP/TWIP Steels, Part 1: Current Practice and Processing Fundamentals Academic Article
Review of Manganese Processing for Production of TRIP/TWIP Steels, Part 2: Reduction Studies Academic Article
Revisited Storage and Dynamic Recovery of Dislocation Density Evolution Law: Toward a Generalized Kocks-Mecking Model of Strain-Hardening Academic Article
Rheological measurements and rheological shell model Considering the compressible behavior of long fiber reinforced sheet molding compound (SMC) Academic Article
Rheology of Liquid Al, Zn and Zn-7wt%Al Systems Conference Paper
Rhombohedral Form of Li₃V₂(PO₄)₃ as a Cathode in Li-Ion Batteries Academic Article
Role of Fe2Al5 in fracture of novel dissimilar aluminum-steel resistance spot welds using multi-ring domed electrodes Academic Article
Role of Nb in low interstitial 13Cr super martensitic stainless steel Academic Article
Role of Random and Coincidence Site Lattice Grain Boundaries in Liquid Metal Embrittlement of Iron (FCC)-Zn Couple Academic Article
Role of damage on the flow and fracture of particulate reinforced alloys and metal matrix composites Academic Article
Role of internal stresses in co-deformed two-phase materials Academic Article
Role of loading direction on compressive deformation behavior of extruded ZK60 alloy plate in a wide range of temperature Academic Article
Room Temperature Ductility and Microstructure of Magnesium AZ31B Sheet Academic Article
Room Temperature Shear Band Development in Highly Twinned Wrought Magnesium AZ31B Sheet Academic Article
Room temperature microindentation of single-crystal MoSi2 Conference Paper
Room-Temperature Atomic Layer Deposition of Elemental Antimony Academic Article
Ruthenium oxide deposits prepared by cathodic electrosynthesis Academic Article
SIMS Analysis of Deuterium Absorption and Diffusion in Austenitic Fe-Mn-C Steels Conference Paper
STRUCTURAL ASPECTS OF THE BAUSCHINGER EFFECT. Academic Article
STUDIES ON FORMATION OF A PROTECTIVE LAYER OF MGO IN BOF REFRACTORIES BY CHEMICAL-TRANSPORT REACTIONS DURING SERVICE Conference Paper
SULFATE RESISTANCE OF A CANADIAN SLAG CEMENT Conference Paper
Sandwich Panels with a Core Segmented into Topologically Interlocked Elements Academic Article
Science and Engineering of Composite Materials Journal
Science and Technology of Advanced Materials Journal
Science and Technology of Welding and Joining Journal
Scripta Materialia Nanostructured Materials Journal
Segregation and clustering of solutes at grain boundaries in Mg–rare earth solid solutions Academic Article
Seismic Retrofit of Concrete Block Wall Intersections Using Composite Laminates Academic Article
Selecting Insulation Materials in Building: from Material to Product Academic Article
Selecting the Components of Polymeric Composites Academic Article
Selection Strategies for Materials and Processes Academic Article
Selection of Applications for a Material Academic Article
Selective Oxidation and Reactive Wetting During Hot-Dip Galvanizing of a 1.0 pct Al-0.5 pct Si TRIP-Assisted Steel Academic Article
Selective Oxidation and Reactive Wetting during Galvanizing of a CMnAl TRIP-Assisted Steel Academic Article
Selective Oxidation and Reactive Wetting of 1.0 Pct Si-0.5 Pct Al and 1.5 Pct Si TRIP-Assisted Steels Academic Article
Selective Oxidation of a 0.1C-6Mn-2Si Third Generation Advanced High-Strength Steel During Dew-Point Controlled Annealing Academic Article
Selective Oxidation of a C-2Mn-1.3Si (Wt Pct) Advanced High-Strength Steel During Continuous Galvanizing Heat Treatments Academic Article
Selective laser melting of hybrid ex-situ/in-situ reinforced titanium matrix composites: Laser/powder interaction, reinforcement formation mechanism, and non-equilibrium microstructural evolutions Academic Article
Self-Consistent Model for Planar Ferrite Growth in Fe-C-X Alloys Academic Article
Sensitivity of Positron Annihilation Spectroscopy to Energy Contamination in Low Energy Boron Ion Implantation Conference Paper
Sensitivity of Thermophysical Material Properties on Solidification Simulation of Al-Si Binary Alloys Academic Article
Sequence of precipitation in 339 aluminum castings Academic Article
Sequential modeling of local precipitation, strength and strain hardening in friction stir welds of an aluminum alloy 6005A-T6 Academic Article
Severe plastic deformation of metals by high-pressure tube twisting Academic Article
Shallow States of the DX Centre in AlGaAs: Sn Probed by Admittance Spectroscopy Academic Article
Shear Localization and Damage in AA5754 Aluminum Alloy Sheets Conference Paper
Shrinkage and Springback Behavior of Methylsilsesquioxanes Prepared by an Acid/Base Two-Step Processing Procedure Academic Article
Silver Nanorice Structures: Oriented Attachment-Dominated Growth, High Environmental Sensitivity, and Real-Space Visualization of Multipolar Resonances Academic Article
Silver nanoparticle assembly on carbon nanotubes triggered by reductive surfactant coating Academic Article
Silver?Glass Composite for High Temperature Sealing Academic Article
Similar Roles of Electrons and Holes in Luminescence Degradation of Organic Light-Emitting Devices Academic Article
Simulating the Topology of Recrystallization in Stabilized Ferritic Stainless Steels Conference Paper
Simulation Study of Heterogeneous Nucleation at Grain Boundaries During the Austenite-Ferrite Phase Transformation: Comparing the Classical Model with the Multi-Phase Field Nudged Elastic Band Method Conference Paper
Simulation of Semi-Solid Material Mechanical Behavior Using a Combined Discrete/Finite Element Method Academic Article
Simulation of Solidification Across the Length Scales Academic Article
Simulation of Texture Development of Plane Carbon Steel in Multipass Rolling Using Analytical Flow Function Conference Paper
Simulation of early-stage clustering in ternary metal alloys using the phase-field crystal method Academic Article
Single crystal ZnSr:Mn prepared by ion implantation Academic Article
Single crystal growth and variation of thermodynamic and magnetic properties of Pr1−La AlO3 (x= 0, 0.8) Academic Article
Single-Step Generation of Flexible, Free-Standing Arrays of Multimode Cylindrical Waveguides Academic Article
Sintered hollow spheres: Random stacking behaviour under uniaxial tensile loading Academic Article
Sintering and Microstructure Modification of Mullite/Zirconia Composites Derived from Silica-Coated Alumina Powders Academic Article
Sisal-glass fiber hybrid biocomposite: Optimization of injection molding parameters using Taguchi method for reducing shrinkage Academic Article
Site Occupation of Ga and Al in Stabilized Cubic Li_7–3(x+y)Ga_xAl_yLa₃Zr₂O₁₂ Garnets As Deduced from ²⁷Al and ⁷¹Ga MAS NMR at Ultrahigh Magnetic Fields Academic Article
Size effect in tension of thin films on substrate: a study based on the reformulation of mechanism-based strain gradient plasticity Conference Paper
Smart Materials and Structures Journal
Softening Kinetics in the Subcritical Heat-Affected Zone of Dual-Phase Steel Welds Academic Article
Software review - CES4 Academic Article
Sol-gel synthesis, spark plasma sintering, structural characterization, and thermal conductivity measurement of heavily Nb-doped SrTiO3/TiO2 nanocomposites Academic Article
Solid State Extraction of Nickel from Nickel Sulfide Concentrates Academic Article
Solid State Sciences International Journal of Inorganic Materials Journal
Solid solution induced back-stress in multi-principal element alloys: Experiment and modeling Academic Article
Solid state NMR investigation of the structure of AlPO4-14A Academic Article
Solid-State NMR Studies of the Fluoride-Containing Zeolite SSZ-44 Academic Article
Solid-state 29Si NMR spectra of pure silica zeolites for the International Zeolite Association Database of Zeolite Structures Academic Article
Solid-state NMR and X-ray diffraction structural investigations of the p-nitroaniline/ZSM-5 complex Academic Article
Solidification of Discontinuous Al2O3 Fiber Reinforced Magnesium (AM60) Matrix Composite Conference Paper
Solidification of electronic materials: An overview Academic Article
Solute Segregation During Ferrite Growth: Solute/Interphase and Substitutional/Interstitial Interactions Academic Article
Solute atom mediated Hall-Petch relations for magnesium binary alloys Academic Article
Solute drag and wetting of a grain boundary Academic Article
Solute drag in ternary solid solutions Academic Article
Solution Reactions of a Bis(pyrrolylaldiminate)copper(II) Complex with Peralkyl Zinc, Aluminum, and Boron Reagents: Investigation of the Pathways Responsible for Copper Metal Deposition Academic Article
Sol−Gel Organic−Inorganic Composites for 3-D Holographic Lithography of Photonic Crystals with Submicron Periodicity Academic Article
Spacing characterization in Al–Cu alloys directionally solidified under transient growth conditions Academic Article
Spatial and Temporal Characteristics of Propagating Deformation Bands in AA5182 Alloy at Room Temperature Academic Article
Spatial correlations during Ostwald ripening—A simplified approach Academic Article
Spatio-temporal dynamics of the Portevin–Le Chatelier effect: experiment and modelling Academic Article
Specific dislocation multiplication mechanisms and mechanical properties in nanoscaled multilayers: The example of pearlite Academic Article
Specific resistivity of dislocations and vacancies for super-pure aluminium at 4.2 K determined in-situ and post-recovery deformation and correlated to flow stress Academic Article
Spiro-Bridged Ladder-Type Oligo(para -phenylene)s: Fine Tuning Solid State Structure and Optical Properties Academic Article
Spontaneously Ordered Sol−Gel Composites with Submicrometer Periodicity Academic Article
Stability of Retained Austenite in High-Al, Low-Si TRIP-Assisted Steels Processed via Continuous Galvanizing Heat Treatments Conference Paper
Stability of fiber-reinforced elastomeric bearings in an unbonded application Academic Article
Stable Solution-Processed High-Mobility Substituted Pentacene Semiconductors Academic Article
Stamping Blank Optimal Layout and Coil Slitting Widths for Single and Multiple Blanks Conference Paper
Static grain growth in a microduplex Ti–6Al–4V alloy Academic Article
Static recrystallization impact on grain structure and mechanical properties of heat-treated Hastelloy X produced via laser powder-bed fusion Academic Article
Static softening following multistage hot deformation of 7150 aluminum alloy: Experiment and modeling Academic Article
Statistical behaviour and strain localization patterns in the Portevin-Le Chatelier effect Academic Article
Statistical evaluation of corrosion of sialon in burner rig simulated combustion atmospheres Academic Article
Steel-Based Composites: Driving Forces and Classifications Chapter
Steel-Magnesium Composite Wire Obtained by Repeated Co-Extrusion Conference Paper
Steel-copper functionally graded material produced by twin-wire and arc additive manufacturing (T-WAAM) Academic Article
Stochastic optimization programming for multi-reach river system using GA combined with stochastic simulation Academic Article
Strain Localization During Compressive Deformation of Mg-Gd Alloy Academic Article
Strain fields around dislocation arrays in a Σ9 silicon bicrystal measured by scanning transmission electron microscopy Academic Article
Strain induced directional coarsening in Ni based superalloys Academic Article
Strain localization and damage development during bending of Al–Mg alloy sheets Academic Article
Strain rate sensitivity effects with forming characteristics of superplastic Ti6Al4V Academic Article
Strain softening, slip localization and propagation: From simulations to continuum modelling Academic Article
Strain-Path Dependence of $$ \{ 10\bar{1}2\} $$ { 10 1 ¯ 2 } Twinning in a Rolled Mg–3Al–1Zn Alloy: Influence of Twinning Model Academic Article
Strain-Rate Sensitivities of Different Deformation Mechanisms in AZ31B Magnesium Alloy Sheet at Various Temperatures Academic Article
Strain-hardening of twinning-induced plasticity steels Academic Article
Strategies for electrosynthesis of poly(vinylbenzyltrimethylammonium chloride) and composite films Academic Article
Strategies to Optimize the Capacitive Behavior of Polypyrrole Electrodes Academic Article
Strength and ductility of as-plated and sintered CVD nickel foams Academic Article
Strength and stiffness of adhesively bonded GFRP beam-column moment resisting connections Academic Article
Strength of Tape Cast and Laminated Ceramics Academic Article
Strength-ductility synergy in a 1.4 GPa austenitic steel with a heterogeneous lamellar microstructure Academic Article
Strengthening Mechanisms in AL Alloys - an Overview of Natural Limits and Engineering Possibilities Conference Paper
Strengthening mechanisms in nanostructured copper/304 stainless steel multilayers Academic Article
Strengthening of RC beams with externally bonded and anchored thick CFRP laminate Academic Article
Strengthening via the formation of strain-induced martensite in stainless steels Conference Paper
Stress Development Due to Capillary Condensation in Powder Compacts: A Two-Dimensional Model Study Academic Article
Stress and strain gradients in high-pressure tube twisting Academic Article
Stress relaxation in Mg-Al-alloys AZ31 reinforced by ceramic form Conference Paper
Strong and ductile steel via high dislocation density and heterogeneous nano/ultrafine grains Academic Article
Structural Characterization of SiC Platelet-Reinforced Al2O3 Matrix Composites before and after Creep Deformation Conference Paper
Structural Complexity and Electrical Properties of the Garnet-Type Structure LaLi_0.5Fe_0.2O_2.09 Studied by ⁷Li and ¹³⁹La Solid State NMR Spectroscopy and Impedance Spectroscopy Academic Article
Structural Investigation of Silicalite-I Loaded with n-Hexane by X-ray Diffraction, ²⁹Si MAS NMR, and Molecular Modeling Academic Article
Structural and magnetic properties of the MnFeSi P1- magnetocaloric phases Academic Article
Structural aspects of materials subjected to large strains Conference Paper
Structural characteristics of Cu/Ti bimetal composite produced by accumulative roll-bonding (ARB) Academic Article
Structural evolution and electromechanical properties of SrTiO3-modified Bi0.5Na0.5TiO3–BaTiO3 ceramics prepared by sol-gel and hydrothermal methods Academic Article
Structural properties of near-stoichiometric composition of Ba(B′_1/3B″_2/3)O₃ (B′ = Mg, Co, or Zn and B″ = Nb or Ta) perovskites Academic Article
Structure Solution of Metal-Oxide Li Battery Cathodes from Simulated Annealing and Lithium NMR Spectroscopy Academic Article
Structure and Dynamics in Functionalized Graphene Oxides through Solid-State NMR Academic Article
Structure and Electrochemistry of Two-Electron Redox Couples in Lithium Metal Fluorophosphates Based on the Tavorite Structure Academic Article
Structure and Electronic Structure Evolution of P2-Na_xCoO₂ Phases from X-ray Diffraction and ²³Na Magic Angle Spinning Nuclear Magnetic Resonance Academic Article
Structure and Magnetic Properties of Quasi-One Dimensional Cobalt-Doped Scandium Cuprate Compounds Academic Article
Structure and Magnetism in λ-MnO₂. Geometric Frustration in a Defect Spinel Academic Article
Structure and conductivity of zirconium-doped polycrystalline lithium yttrium oxide Academic Article
Structure and crystallography of martensite–austenite constituent in the intercritically reheated coarse-grained heat affected zone of a high strength pipeline steel Academic Article
Structure and magnetic interactions in the solid solution Ba3−xSrxCr2O8 Academic Article
Structure and magnetism in Pr3RuO7 Academic Article
Structure and mechanical properties of Cu-X (X = Nb,Cr,Ni) nanolayered composites Conference Paper
Structure and mechanical properties of MoSi²-Sic nanolayer composites Academic Article
Structure and mechanical properties of Ni/Ti multilayered composites produced by accumulative roll-bonding process Academic Article
Structure and physical properties of Cr5B3-type Ta5Si3 and Ta5Ge3 Academic Article
Structure and properties of AlSiC foam Academic Article
Structure and properties of cast Al–Si based alloy with Zr–V–Ti additions and its evaluation of high temperature performance Academic Article
Structure and property evolution during drawing and wall ironing of aluminum alloy 3004 Academic Article
Structure of new metastable cubic TbO2−x Academic Article
Structure, magnetic and magnetocaloric properties of RE11Ge8In2 (RE = Gd–Tm) Academic Article
Structure-properties relationship of ultra-fine grained V-microalloyed dual phase steels Academic Article
Structure-property models in Al-Zn-Mg-Cu alloys: A critical experimental assessment of shape castings Academic Article
Structure–property optimization of ultrafine-grained dual-phase steels using a microstructure-based strain hardening model Academic Article
Studies of Defects in Electron and Proton Irradiated ZnO by Positron Annihilation Conference Paper
Studies of Gold Nanoparticles as Precursors to Printed Conductive Features for Thin-Film Transistors Academic Article
Studies of interface reactions between zinc and reduced red scale on a Mn/Si dual phase steel Academic Article
Studies of the influence of alloying elements on the growth of ferrite from austenite under decarburization conditions: Fe-C-Nl alloys Conference Paper
Studies on Nb Microalloying of 13Cr Super Martensitic Stainless Steel Academic Article
Studies on Softening Kinetics of Niobium Microalloyed Steel Using Stress Relaxation Technique Conference Paper
Studies on effects of pitting morphology in resistance spot welding of aluminium alloy Conference Paper
Studies on softening kinetics of niobium microalloyed steel using stress relaxation technique Academic Article
Studies on the growth of voids in amorphous glassy polymers Academic Article
Studies on the micro-laser spot welding of an NdFeB permanent magnet with a low carbon steel Academic Article
Study and Applications of Dynamic Resistance Profiles During Resistance Spot Welding of Coated Hot-Stamping Steels Academic Article
Study of Deformation Mechanisms of a High-Purity α-Titanium Plate Under Monotonic Loading with the EVPSC-TDT Model Academic Article
Study of Grain-Growth Kinetics in Delta-Ferrite and Austenite with Application to Thin-Slab Cast Direct-Rolling Microalloyed Steels Academic Article
Study of Imidazole-Based Proton-Conducting Composite Materials Using Solid-State NMR Academic Article
Study of Influence of Superimposed Hydrostatic Pressure on Ductility in Ring Compression Test Academic Article
Study of Lithium Dynamics in Monoclinic Li₃Fe₂(PO₄)₃ using ⁶Li VT and 2D Exchange MAS NMR Spectroscopy Academic Article
Study of damage initiation and fracture in aluminum tailor welded blanks made via different welding techniques Academic Article
Study of fatigue damage in 7010 aluminum alloy Academic Article
Study of large strain deformation of dilute solid solutions of Al-Cu using channel-die compression Academic Article
Study of precipitation and fracture in air-cast Mn-Al-C magnets Academic Article
Study of the early stages of clustering in Al–Mg–Si alloys using the electrical resistivity measurements Academic Article
Study of the formation of adiabatic shear bands in steels Academic Article
Study of the mechanical properties of Mg-7.7at.% Al byin-situneutron diffraction Academic Article
Study of wear performance and tribological characterization of AlTiN PVD coatings with different Al/Ti ratios during ultra-high speed turning of stainless steel 304 Academic Article
Study on Sn–Ag Oxidation and Feasibility of Room Temperature Bonding of Sn–Ag–Cu Solder Academic Article
Studying grain fragmentation in ECAE by simulating simple shear Academic Article
Studying the effect of stress relaxation and creep on lattice strain evolution of stainless steel under tension Academic Article
Sulphidation resistance of composite boiler tube materials Academic Article
Sulphidation resistance of composite boiler tube materials Academic Article
Supercooling, induction times and nucleation in flux growth: WO3 as a model solute Academic Article
Superior fracture toughness in a high-strength austenitic steel with heterogeneous lamellar microstructure Academic Article
Superledge Model for Interphase Precipitation During Austenite-to-Ferrite Transformation Academic Article
Superplastic behavior of a zn-22 pct ai-0.5 pct cu alloy Academic Article
Supersaturated α-iron in vapour-deposited Fe–C thin films Academic Article
Superwetting polyethersulfone membrane functionalized with ZrO2 nanoparticles for polycyclic aromatic hydrocarbon removal Academic Article
Supported and coordinated single metal site electrocatalysts Academic Article
Suppression of liquid metal embrittlement in resistance spot welding of TRIP steel Academic Article
Suppression of strain-induced precipitation of NbC by epitaxial growth of NbC on pre-existing TiN in Nb-Ti microalloyed steel Academic Article
Supramolecular Functionalization of Single-Walled Carbon Nanotubes with Triply Fused Porphyrin Dimers: A Study of Structure–Property Relationships Academic Article
Surface Microstructure Modification by Wire-Brushing and Annealing and its Effect on Tensile Ductility and Bendability of Mg Sheet Conference Paper
Surface Modification of 304 Stainless Steel by Electro-Spark Deposition Academic Article
Surface activated bonding of LCP/Cu for electronic packaging Conference Paper
Surface and honeycomb core damage in adhesively bonded aluminum sandwich panels subjected to low-velocity impact Academic Article
Surface cracking and phase transformations associated with cathodic charging of austenitic stainless steel Academic Article
Surface modification and dispersion of ceramic particles using liquid-liquid extraction method for application in supercapacitor electrodes Conference Paper
Surface modification and electrophoretic deposition of materials using 2,2′-biquinoline-4,4′-dicarboxylic acid Academic Article
Surface modification and electrophoretic deposition of materials using carboxyalkylphosphonic acids Academic Article
Surface precipitation on engineering alloys Academic Article
Surface sorption and surface diffusion of NpO2+ with poorly crystallized ferric oxide Conference Paper
Suzuki Coupling Reactions for the Surface Functionalization of Single-Walled Carbon Nanotubes Academic Article
Switching plasmonic resonance in multi-gap infrared metasurface absorber using vanadium dioxide patches Academic Article
Synchrotron tomographic quantification of the influence of Zn concentration on dendritic growth in Mg-Zn alloys Academic Article
Synergistic effects of Ce and Mg on the microstructure and tensile properties of Al-7Si-0.3Mg-0.2Fe alloy Academic Article
Syntheses: Mechanical properties of heterogeneous media: Which material for which model? Which model for which material? Conference Paper
Synthesis and Electrophoretic Deposition of Single-Walled Carbon Nanotube Complexes with a Conjugated Polyelectrolyte Academic Article
Synthesis and Magnetic Properties of Ni-Zirconia Composites Academic Article
Synthesis and Steady-State Photophysical Properties of Dye-Labeled Dendrimers Having Novel Oligothiophene Cores: A Comparative Study Academic Article
Synthesis and Thin-Film Transistor Performance of Poly(4,8-didodecylbenzo[1,2-b:4,5-b‘]dithiophene) Academic Article
Synthesis and dielectric properties of barium tantalates and niobates with complex perovskite structure Academic Article
Synthesis and thermal stability of dense polycrystalline barium β″-alumina Academic Article
Synthesis of WC–Ni composite powders by thermochemical processing method based on co-precipitation Academic Article
Synthesis of buried insulating layers in silicon by ion implantation Academic Article
Synthesis of sodium β″-alumina powder by sol–gel combustion Academic Article
Synthesis with Glucose Reduction Method and Low Temperature Sintering of Ag-Cu Alloy Nanoparticle Pastes for Electronic Packaging Academic Article
Synthesis, Crystal Structure, Crystal Chemistry, and Magnetic Properties of PbMBO₄ (M = Cr, Mn, Fe): A New Structure Type Exhibiting One- Dimensional Magnetism Academic Article
Synthesis, Crystal Structure, and Electronic Properties of the CaRE₃SbO₄ and Ca₂RE₈Sb₃O₁₀ phases (RE = Rare-Earth Metal) Academic Article
Synthesis, Structure, and Electroluminescence of BR₂q (R = Et, Ph, 2-Naphthyl and q = 8-Hydroxyquinolato) Academic Article
Synthesis, Structure, and Physical Properties of Mixed Valent Mo₂SbS₂, the First Superconducting Antimonide-Sulfide Academic Article
Synthesis, Structure, and Thermoelectric Properties of α-Zn₃Sb₂ and Comparison to β-Zn₁₃Sb₁₀ Academic Article
Synthesis, liquid – Liquid extraction and deposition of hydroxyapatite nanorod composites Academic Article
TEM investigations of the oxide layers formed on a 316L alloy in simulated PWR environment Academic Article
TEM studies of stress relaxation in GaAsN and GaP thin films Conference Paper
TEM study of microstructure development during low-cycle fatigue of an overaged Al-Mg-Si alloy Academic Article
THE EFFECT OF TEMPERATURE ON LOCALIZATION OF DEFORMATION IN COPPER SINGLE-CRYSTALS SUBJECTED TO TENSION Academic Article
THERMODYNAMICS OF FE3O4-FECR2O4 AND FE3O4-FEV2O4 SPINEL SOLID-SOLUTIONS Conference Paper
TLP repaired IN738LC superalloy with uneven surface defect gap width after post heat treatment: Microstructure and mechanical properties Academic Article
TOSSPB: Thermoelectric optimization based on scattering-dependent single-parabolic band model Academic Article
TRANSIENT DIFFUSION OF BERYLLIUM AND SILICON IN GALLIUM ARSENIDE Academic Article
Tail Breaking Force in Thermosonic Wire Bonding with Novel Bonding Wires Conference Paper
Tailoring Sol–Gel-Derived Silica Materials for Optical Biosensing Academic Article
Tailoring anisotropic thermal conductivity by varying filler particle organization in nickel-polydimethylsiloxane composites Academic Article
Tailoring the mechanical properties of steel sheets using FeC films and diffusion annealing Academic Article
Tape Casting of Fine Alumina/Zirconia Powders for Composite Fabrication Academic Article
Targeted structural changes and magnetic properties study in (Ho/Er)5Ga3−x(Co/Fe)x Academic Article
Targeting low-cost type-II heterostructures: Synthesis, structure and photoreactivity Academic Article
Temperature dependence of magnetic properties of SmCo/FeCo multilayer films Academic Article
Temperature measurement when high speed machining hardened mould/die steel Academic Article
Tempering of Martensite in Dual-Phase Steels and Its Effects on Softening Behavior Academic Article
Tensile Properties and Work Hardening Behavior of Laser-Welded Dual-Phase Steel Joints Academic Article
Tensile and Fatigue Properties of Single and Multiple Dissimilar Welded Joints of DP980 and HSLA Academic Article
Tensile and bending properties of AA5754 aluminum alloys Academic Article
Tensile and fatigue properties of fiber laser welded high strength low alloy and DP980 dual-phase steel joints Academic Article
Tensile and fatigue properties of weld-bonded and adhesive-bonded magnesium alloy joints Academic Article
Tensile instability in face-centred cubic materials Academic Article
Tensile properties and bendability of T4 treated AA6111 aluminum alloys Academic Article
Tensile properties and strain-hardening behavior of double-sided arc welded and friction stir welded AZ31B magnesium alloy Academic Article
Tensile properties of as-cast aluminum alloys AA3104, AA6111 and CA31218 at above solidus temperatures Academic Article
Tensile properties of fiber laser welded joints of high strength low alloy and dual-phase steels at warm and low temperatures Academic Article
Testing and modeling of a novel FRP-encased steel–concrete composite column Academic Article
Testing thermal stability of orthorhombic GdCuP2.16 structure Academic Article
Tests of the zener theory of the incomplete transformation phenomenon in Fe-C-Mo and related alloys Academic Article
Texture Modification During Extrusion of Some Mg Alloys Academic Article
Texture and mechanical behavior evolution of age-hardenable Mg–Nd–Zn extrusions during aging treatment Academic Article
Texture evolution in AA5754 alloys deformed in tension Academic Article
The "Rhone Alpes Federation of Structural Materials" Academic Article
The Aerodynamics of Cooling of Blown Film Bubbles Academic Article
The Applicability of Sr-deficient n-type SrTiO3 for SOFC Anodes Academic Article
The Bauschinger effect in a particulate reinforced Al alloy Academic Article
The Bauschinger effect in drawn and annealed nanocomposite Cu–Nb wires Academic Article
The Bi-K bismuth-potassium system Academic Article
The Bi-Rb (bismuth-rubidium) system Academic Article
The Ce-Mn-P system (Cerium-Manganese-Phosphorus) Academic Article
The Co-Cr-S ternary system at 1223 K and applications to corrosion Academic Article
The Comparative Effectiveness of Nb Solute and NbC Precipitates at Impeding Grain Boundary Motion in Nb-Steels Conference Paper
The Effect of Intergranular Phase Crystallinity on the Oxidation Rates of a Silicon Nitride Academic Article
The Effect of Interlayer Cations on the Magnetic Properties of the Mixed-Metal Pnictide Oxides: A₂MnZn₂As₂O₂ (A = Sr, Ba) Academic Article
The Effect of Nb on the Recrystallization and Grain Growth of Ultra-High-Purity α-Fe: A Combinatorial Approach Academic Article
The Effect of Porosity on Fatigue of Die Cast AM60 Academic Article
The Effect of Pulse Energy on the Defects and Microstructure of Electro-Spark-Deposited Inconel 718 Academic Article
The Effect of Size on the Deformation Twinning Behavior in Hexagonal Close-Packed Ti and Mg Academic Article
The Effects of Substrate Bias and Edge Proximity on the Mechanical Properties and Machining Performance of TiN-Coated Carbide Inserts Academic Article
The Extraction and Dynamic Monitoring of Leaf Area Index in Northeast of China Based on SPOT VEGETATION Data Conference Paper
The Influence of the Zinc Concentration on Defect Characteristics of InP Conference Paper
The Interaction of Methylene Blue Dye with Calcium-Silicate-Hydrate Academic Article
The Kirkendall effect in the phase field crystal model Academic Article
The Manipulation and Alignment of Silicon Carbide Whiskers for Gallium Nitride Epitaxial Growth Academic Article
The Mechanisms of Resistance Spot Welding of Magnesium to Steel Academic Article
The Portevin–Le Chatelier (PLC) effect and shear band formation in an AA5754 alloy Academic Article
The Role of Impurities in the Formation of Voids in Silicon Conference Paper
The Role of Internal Oxides on the Liquid Metal Embrittlement Cracking During Resistance Spot Welding of the Dual Phase Steel Academic Article
The Role of Platelet Orientation on the Creep Behaviour of Al2O3/SiC Composites Conference Paper
The Sequence of Intermetallics Formation during the Solidification of an Al-Mg-Si Alloy Containing La Academic Article
The Work Hardening of Single Phase and Multi-Phase Aluminium Alloys Conference Paper
The anisotropy and diverse mechanical properties of rolled Mg–3% Al–1% Zn alloy Academic Article
The behaviour of aluminium-chromium ferritic steels in simulated coal gasification atmospheres at 723 K Academic Article
The carbothermic route to magnesium Academic Article
The cathodic electrodeposition of manganese oxide films for electrochemical supercapacitors Academic Article
The coffin-manson law as a consequence of the statistical nature of the LCF surface damage Academic Article
The comparative effectiveness of Nb solute and NbC precipitates at impeding grain-boundary motion in Nb steels Academic Article
The continuum theory of nucleation in multicomponent systems Academic Article
The contribution of viscous flow to creep deformation of silicon nitride Academic Article
The coupled solute drag effect during ferrite growth in Fe–C–Mn–Si alloys using controlled decarburization Academic Article
The critical recrystallization strain of δ-Plutonium Academic Article
The deciding role of texture on ductility in a Ce containing Mg alloy Academic Article
The deformation behavior and processing maps in the isothermal compression of 7A09 aluminum alloy Academic Article
The deformation of CuW laminates Academic Article
The deformation of copper single crystals at 4.2 °K Conference Paper
The diffusion controlled growth rate of solid-solid interphase boundaries containing ledges Academic Article
The diffusional formation of ferrite from austenite in Fe-C-Ni alloys Conference Paper
The effect of Sc on plastic deformation of Mg–Sc binary alloys under tension Academic Article
The effect of aluminum ion implantation on the oxidation of an Fe-6 at.% Al alloy at 1173 K Academic Article
The effect of annealing on the microstructure and tensile properties of a β/γ′ Ni–Al–Fe alloy Academic Article
The effect of chemical patterning induced by cyclic plasticity on the formation of precipitates during aging of an Al–Mg–Si alloy Academic Article
The effect of grain size on low-cycle fatigue behavior of Al-2024 polycrystalline alloy Academic Article
The effect of manganese on the microstructure and tensile response of an Al-Mg-Si alloy Academic Article
The effect of microstructure on damage and fracture in AZ31B and ZEK100 magnesium alloys Academic Article
The effect of natural ageing on the evolution of yield strength during artificial ageing for Al-Mg-Si-Cu alloys Conference Paper
The effect of powder pre-treatment on the mechanical and thermoelectric properties of spark plasma sintered N-type bismuth telluride Academic Article
The effect of prior ferrite formation on bainite and martensite transformation kinetics in advanced high-strength steels Academic Article
The effect of size on dislocation cell formation and strain hardening in aluminium Academic Article
The effect of solute on discontinuous dynamic recrystallization Academic Article
The effect of tempering on low cycle fatigue behavior of Al-2024 Conference Paper
The electrodeposition of ceramic and organoceramic films for fuel cells Academic Article
The energetics of surface-alloy formation: an embedded-atom-method, second-order-expansion study Conference Paper
The fabrication, properties and microstructure of Cu–Ag and Cu–Nb composite conductors Academic Article
The flow behavior and constitutive equations in isothermal compression of 7050 aluminum alloy Academic Article
The growth of ferrite in Fe-C-X alloys: The role of thermodynamics, diffusion, and interfacial conditions Conference Paper
The impact of particle distributions and grain-level inhomogeneities on post-necking deformation and fracture in AA5754 sheet alloys during uniaxial tension Academic Article
The in-depth residual strain heterogeneities due to an indentation and a laser shock peening for Ti-6Al-4V titanium alloy Academic Article
The influence of aging on the microstructure and creep behaviour of a γ-Ti–48%Al–2%W intermetallic Conference Paper
The influence of base metal grain size on isothermal solidification during transient liquid-phase brazing of nickel Academic Article
The influence of hydrostatic pressure on the ductility of AlSiC composites Academic Article
The influence of in-situ alloying of electro-spark deposited coatings on the multiscale morphological and mechanical properties of laser welded Al–Si coated 22MnB5 Academic Article
The influence of microstructure and composition on the plastic behaviour of dual-phase steels Academic Article
The influence of nanoparticles on dendritic grain growth in Mg alloys Academic Article
The influence of particle distribution on the mechanical response of a particulate metal matrix composite Academic Article
The influence of plastic instabilities on the mechanical properties of a high-manganese austenitic FeMnC steel Academic Article
The influence of precipitation on the work-hardening behavior of the aluminum alloys AA6111 and AA7030 Academic Article
The influence of silicon additions on the deformation behavior of austenite-ferrite duplex medium manganese steels Academic Article
The influence of surface preparation on the structures of nickel oxide formed on the (100) face of nickel Academic Article
The interaction of plasticity and diffusion controlled precipitation reactions Academic Article
The interaction of reaction-bonded silicon carbide and inconel 600 with a nickel-based brazing alloy Academic Article
The interaction of twins and precipitates in a Mg-7.7 at.% Al alloy Academic Article
The kinetics of interface-diffusion-controlled reaction in lamellar eutectoids and reactive multilayers Academic Article
The magnetic structures of the mixed layer pnictide oxide compounds Sr2Mn3Pn2O2 (Pn = As, Sb) Academic Article
The mechanical behavior of directionally solidified Al-Ni in compression Academic Article
The mechanical properties of fine-scale two-phase materials Conference Paper
The mechanical properties of friction welded aluminium-based metal-matrix composite materials Academic Article
The mechanical properties of laminated microscale composites of Al/Al2O3 Academic Article
The mechanical response of compositionally graded materials Conference Paper
The mechanism of pore segregation in the sintered nano Ag for high temperature power electronics applications Academic Article
The nature of ion milling damage in MoSi 2 Academic Article
The non-centrosymmetric borate chlorides Ba2TB4O9Cl (T=Al, Ga) Academic Article
The production of fine-scale microstructures by rapid annealing Conference Paper
The recrystallization of copper single crystals deformed at 4.2 K Academic Article
The relationship between transient and steady state creep in AISI 304 stainless steel Academic Article
The role of carbon on the kinetics of bainite transformation in steels Academic Article
The role of chromium in protective alumina scale formation during the oxidation of ternary TiAlCr alloys in air Academic Article
The role of double twinning on transgranular fracture in magnesium AZ61 in a localized stress field Academic Article
The role of grain-boundary disorder in the generation and growth of antiphase domains during recrystallization of cold-rolled Cu3Au Academic Article
The role of heterogeneity on the flow and fracture of two-phase materials Conference Paper
The role of internal stresses on the plastic deformation of the Al–Mg–Si–Cu alloy AA6111 Academic Article
The role of microstructure on edge cracks in dual phase and quench and partitioning steels subject to severe cold rolling Academic Article
The role of the triple line in solid-state microstructural evolutions: Interplay with interfaces and consequences on instabilities and pattern selection Academic Article
The series LnSrVO4: synthesis, crystal structure, crystal chemistry and magnetic susceptibilities Conference Paper
The shearable–non-shearable transition in Al–Mg–Si–Cu precipitation hardening alloys: implications on the distribution of slip, work hardening and fracture Conference Paper
The significance of spatial length scales and solute segregation in strengthening rapid solidification microstructures of 316L stainless steel Academic Article
The stored energy of cold work: Predictions from discrete dislocation plasticity Academic Article
The strain induced martensite transformation in austenitic stainless steels: Part 1 – Influence of temperature and strain history Academic Article
The strain induced martensite transformation in austenitic stainless steels: Part 2 – Effect of internal stresses on mechanical response Academic Article
The structure and properties of spray formed cold rolling mill work roll steels Academic Article
The structure of 〈c + a〉 type dislocation loops in magnesium Academic Article
The surface energy of metastable Al3Li precipitates from coarsening kinetics Academic Article
The surface morphology of atomic layer deposited magnesia Academic Article
The true crystal structure of Li17M4 (M=Ge, Sn, Pb)–revised from Li22M5 Academic Article
The use of compacts for durability investigation of cement-based materials Academic Article
The velocity of plate precipitates growing by the ledge mechanism Academic Article
The “Ductilities” in Single Phase Steels from Usual to Nano-Scale Microstructures Academic Article
The “Ductilities” in Single Phase Steels from Usual to Nanoscale Microstructures Academic Article
Theory of magnetoresistance due to lattice dislocations in face-centred cubic metals Academic Article
Thermal Concentration of Nickeliferous Pyrrhotite Concentrate for Nickel Recovery Using Metallic Iron: Thermodynamic Assessments and Effects of Process Variables Academic Article
Thermal ageing of an Fe‒Cu alloy: Microstructural evolution and precipitation hardening Academic Article
Thermal monitoring of microstructure and carbide morphology in direct metal deposition of Fe-Ti-C metal matrix composites Academic Article
Thermally activated dislocation dynamics in austenitic FeMnC steels at low homologous temperature Academic Article
Thermally activated flow of dislocations in Al–Mg binary alloys Academic Article
Thermochemical Analysis of Phases Formed at the Interface of a Mg alloy-Ni-plated Steel Joint during Laser Brazing Academic Article
Thermodiffusion and molecular diffusion in binaryn-alkane mixtures: experiments and numerical analysis Academic Article
Thermodynamic Brazing Alloy Design for Joining Silicon Carbide Academic Article
Thermodynamic Properties of Fe3O4-FeAl2O4 Spinel Solid Solutions Academic Article
Thermodynamic Properties of Fe3O4-FeV2O4 and Fe3O4-FeCr2O4 Spinel Solid Solutions Academic Article
Thermodynamic assessment of the Bi-Zn system Academic Article
Thermodynamic calculation of phase equilibria of the Bi-Sn-Zn system Academic Article
Thermodynamic contributions from pre-melting or pre-transformation of finely dispersed crystals Academic Article
Thermodynamic implications of drawing rectilineal phase boundaries Academic Article
Thermodynamic properties of coherent interfaces in f.c.c.-based Ag–Al alloys: a first-principles study Academic Article
Thermodynamical computations for removal of alkali halides and lead compounds from electric arc furnace dust Academic Article
Thermodynamics of boron distribution in solvent refining of silicon using ferrosilicon alloys Academic Article
Thermoelectric properties of A0.05Mo3Sb5.4Te1.6 (A=Mn, Fe, Co, Ni) Academic Article
Thermoelectric properties, crystal and electronic structure of semiconducting RECuSe2 (RE=Pr, Sm, Gd, Dy and Er) Academic Article
Thermomechanical simulation and experimental characterisation of hot tearing during solidification of aluminium alloys Academic Article
Thickness Alteration of Grain-Boundary Amorphous Films during Creep of a Multiphase Silicon Nitride Ceramic Academic Article
Thin-film alloys of Bi_1−x Sb_x produced by ion-beam mixing and their thermoelectric properties Academic Article
Thin-film micropatterning using polymer microspheres Academic Article
Three-Dimensional (3-D) Atom Probe Tomography of a Cu-Precipitation-Strengthened, Ultrahigh-Strength Carburized Steel Academic Article
Three-Dimensional Finite Element Analysis of the Cold Expansion of Fastener Holes in Two Aluminum Alloys Academic Article
Three-Dimensional Measurement of Local Strain Distribution by Tracking Microstructural Features in High-Resolution SR-CT Image Conference Paper
Three-dimensional analysis of the creep due to a viscous grain boundary phase Academic Article
Three-dimensional analytical techniques for evaluation of osseointegrated titanium implants Academic Article
Three-dimensional finite element analysis of circular fiber-reinforced elastomeric bearings under compression Academic Article
Three-dimensional granular model of semi-solid metallic alloys undergoing solidification: Fluid flow and localization of feeding Academic Article
Three-dimensional investigation of grain orientation effects on void growth in commercially pure titanium Academic Article
Three-dimensional texture determination of 6111 aluminium alloy sheet by precise serial sectioning and EBSD measurement Academic Article
Three-point bending analysis with cohesive surface interaction for improved delamination prediction and application of carbon fibre reinforced plastics composites Academic Article
Time dependence of internal friction and shape change in Cu-Zn-Al shape memory alloys Academic Article
Time-dependent paths, fictive temperatures and residual entropy of glass Academic Article
Time-evolution of microstructure and mechanical behaviour of double annealed medium Mn steel Academic Article
Titanium researcher seeks funding Academic Article
Tool wear mechanisms and tool life enhancement in ultra-precision machining of titanium Academic Article
Topochemical Synthesis of Sodium Metal Phosphate Olivines for Sodium-Ion Batteries Academic Article
Torsional and compressive behaviours of a hybrid material: Spiral fibre reinforced metal matrix composite Academic Article
Total hip performance under magnetic field Academic Article
Toughness of fiber-reinforced titanium as a function of temperature: experimental results and micromechanical modeling Academic Article
Toward the achievement of vision 2020 goals of the heat treating industry Academic Article
Towards the microstructure design of DP steels: A generic size-sensitive mean-field mechanical model Academic Article
Transactions of Nonferrous Metals Society of China Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals Journal
Transactions of the Indian Institute of Metals Journal
Transient Ostwald ripening in systems with a concentration dependent diffusivity. I. The LSW limit Academic Article
Transient Ostwald ripening in systems with a concentration dependent diffusivity. II. Non-zero volume fractions Academic Article
Transient Viscous Phase Reaction Sintering (TVPRS) for the Fabrication of Silicon Oxynitride Ceramics Conference Paper
Transient regimes during high-temperature deformation of a bulk metallic glass: A free volume approach Academic Article
Transmission Electron Microscopy and Nanoindentation Study of the Weld Zone Microstructure of Diode-Laser-Joined Automotive Transformation-Induced Plasticity Steel Academic Article
Transmission Electron Microscopy of Pb(Zr0.52Ti0.48)O3 Academic Article
Transmission electron microscopy investigation of the atomic structure of interfaces in nanoscale Cu–Nb multilayers Academic Article
Transmission electron microscopy observations of debris structure in deformed copper single crystals Academic Article
Transparent single crystalline ZrO2-SiO2 glass nanoceramic sintered by SPS Academic Article
Transport properties of a molybdenum antimonide-telluride with dispersed NiSb nanoparticles Academic Article
Trapping Characteristics of the Dual States of the D-X Center in MBE Grown Si-Doped AlGaAs Academic Article
Trivalent Aluminum Ion Conducting Characteristics in Al2(WO4)3 Single Crystals Academic Article
Trivalent Aluminum Ion Conducting Characteristics in Al₂(WO₄)₃ Single Crystals Academic Article
Tuning Ferro- and Metamagnetic Transitions in Rare-Earth Cobalt Phosphides La_1−xPr_xCo₂P₂ Academic Article
Tuning Magnetic and Structural Transitions through Valence Electron Concentration in the Giant Magnetocaloric Gd_5–xEu_xGe₄ Phases Academic Article
Twin-induced hardening in extruded Mg alloy AM30 Academic Article
Twinning Engineering of a CoCrFeMnNi High-Entropy Alloy Academic Article
Twinning and texture development in two Mg alloys subjected to loading along three different strain paths Academic Article
Twinning engineering of high-entropy alloys: An exercise in process optimization and modeling Academic Article
Twinning nucleation in Cu-8 at.% Al single crystals Academic Article
Two Sorption Processes of NpO2+ within Amorphous Hydrous Ferric Oxide Academic Article
Two-Dimensional S = 1 Quantum Antiferromagnet (NiCl)Sr₂Ta₃O₁₀ Academic Article
Two-Dimensional Short-Range Magnetic Order in the Tetragonal Spinel Li₂Mn₂O₄ Academic Article
Two-dimensional short-range magnetic order in the tetragonal spinel Li2Mn2O4 Academic Article
Two-scale structural mechanical modeling of long fiber reinforced thermoplastics Academic Article
UV-Induced Multilevel Current Amplification Memory Effect in Zinc Oxide Rods Resistive Switching Devices Academic Article
Ultra-Fine Grain Size by Dynamic Recrystallization in Strip Rolling of Nb Microalloyed Steel Conference Paper
Ultra-fine grain size control and mixed grains elimination in industrial multi-pass rolling processing Academic Article
Ultrastrong nanocrystalline binary alloys discovered via high-throughput screening of the CoCr system Academic Article
Ultraviolet photoelectron spectroscopy of quantum-well nano-cathode for organic light-emitting diodes Academic Article
Unambiguous carbon partitioning from martensite to austenite in Fe–C–Ni alloys during quenching and partitioning Academic Article
Uncertainty analysis of hydrocarbon contaminant transport in subsurface Academic Article
Understanding Degradation Mechanisms in SrIrO ₃ Oxygen Evolution Electrocatalysts: Chemical and Structural Microscopy at the Nanoscale Academic Article
Undulate phase boundaries on binary diagrams Academic Article
Uniaxial tensile elastic properties of a regular stacking of brazed hollow spheres Academic Article
Unraveling the Complex Hydrogen Bonding of a Dual-Functionality Proton Conductor Using Ultrafast Magic Angle Spinning NMR Academic Article
Unusual temperature dependence of the solid-liquid interfacial free energy in the Cu-Zr system Academic Article
Use of Internal Variable Models to Predict the High Temperature Behaviour of a 6xxx Industrial Alloy Conference Paper
Use of patterned thermoplastic hot film to create flexible ballistic composite laminates from UHMWPE fabric Academic Article
Use of pressure sensitive adhesives to create flexible ballistic composite laminates from UHMWPE fabric Academic Article
Use of reinforced rigid polyurethane foam for blast hazard mitigation Academic Article
Using Sugar and Amino Acid Additives to Stabilize Enzymes within Sol−Gel Derived Silica Academic Article
Using architectured materials to control localized shear fracture Academic Article
Using the phase-field crystal method in the multi-scale modeling of microstructure evolution Academic Article
VDI-Berichte Journal
Vacancy Behavior and Solute Cluster Growth During Natural Aging of an Al-Mg-Si Alloy Academic Article
Vacancy Type Defects in Proton Irradiated SiC Conference Paper
Vacancy-Type Defects in Electron and Proton Irradiated II-VI Compounds Conference Paper
Vacancy-Type Defects in Electron and Proton Irradiated ZnS and ZnTe Conference Paper
Vacancy-Type Defects in Proton-Irradiated 6H- and 4H-SiC: A Systematic Study with Positron Annihilation Techniques Conference Paper
Vacancy-Type Defects in Proton-Irradiated SiC Conference Paper
Vacuum brazing of alumina to stainless steel using femtosecond laser patterned periodic surface structure Academic Article
Vacuum brazing of carbon nanotube bundles Academic Article
Valid mould and process design to cast tensile and fatigue test bars in tilt pour casting process Academic Article
Validation of void growth models using X-ray microtomography characterization of damage in dual phase steels Academic Article
Variation of the vertical stiffness of strip-shaped fiber-reinforced elastomeric isolators under lateral loading Academic Article
Vectorized 3D microstructure for finite element simulations Academic Article
Versatile Surface Modification of Cellulose Fibers and Cellulose Nanocrystals through Modular Triazinyl Chemistry Academic Article
Versatile natural dispersants for electrophoretic deposition of materials Academic Article
Virtual process chain of sheet molding compound: Development, validation and perspectives Academic Article
Visualization by X-ray tomography of void growth and coalescence leading to fracture in model materials Academic Article
Void Nucleation and Growth in Dual-Phase Steel 600 during Uniaxial Tensile Testing Academic Article
Voltammetric Analysis on the Formation of Fe(OH)2 and FeCO3, and on the Reactivity of Passivation of Steel in Carbonate Solutions Academic Article
Volume Stability of Calcium Sulfoaluminate Phases Academic Article
Waveguide Encoded Lattices (WELs): Slim Polymer Films with Panoramic Fields of View (FOV) and Multiple Imaging Functionality Academic Article
Wear phenomena on WC-based face seal rings Academic Article
Welcome to the IEEE Journal of Selected Topics in Quantum Electronics Issue on Metamaterial Photonics and Integration Academic Article
Weld hardness ratio and liquid metal embrittlement crack’s detrimental effect on resistant spot weld strength Academic Article
Wettability of Carbon (C), Silicon Carbide (SiC), and Silicon Nitride (Si3N4) with Liquid Silicon (Si) Academic Article
Wetting behavior of soy-based resin and unsaturated polyester on surface-modified sisal fiber mat Academic Article
Wetting behaviour of Cu based alloys on spinel substrates in pyrometallurgical context Academic Article
Wire Journal International Journal
Work-hardening behaviour of Mg single crystals oriented for basal slip Academic Article
Workability Characteristics and Deformation Mechanisms of Die-Cast AM60 and AZ91 Magnesium Alloys: Correlation with Processing Maps Academic Article
X-ray diffraction on (AgI)0.7– (NaPO3)0.3 and (AgI)0.8– (NaPO3)0.2 composites Academic Article
X-ray micro-tomographic observations of hot tear damage in an Al–Mg commercial alloy Academic Article
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering Journal
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society Journal
Yosetsu Gakkai Shi/Journal of the Japan Welding Society Journal
Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques International Journal of Materials Research Journal
Zener pinning and grain growth: a two-dimensional vertex computer simulation Academic Article
Zinc oxysulfide thin films grown by atomic layer deposition Academic Article
Zn-doped FeOOH-polypyrrole electrodes for supercapacitors Academic Article
Zn₁₃Sb₁₀: A Structural and Landau Theoretical Analysis of Its Phase Transitions Academic Article
ZnO-based solar photocatalysis for treatment of Cr(VI) contamination Academic Article
[0001] Compression response at room temperature of single-crystal magnesium Academic Article
β-Eucryptite by a Sol-Gel Route Academic Article

Materials Concept

Vocabulary Service

Overview

subject area of