Metallurgical and Materials Transactions A

publication venue for

Simulation Study of Heterogeneous Nucleation at Grain Boundaries During the Austenite-Ferrite Phase Transformation: Comparing the Classical Model with the Multi-Phase Field Nudged Elastic Band Method 2017
Dissimilar Laser Welding/Brazing of 5754 Aluminum Alloy to DP 980 Steel: Mechanical Properties and Interfacial Microstructure 2015
A Comparison of Ferrite Growth Kinetics under Denitriding and Decarburizing Conditions 2015
Constitutive Behavior of Commercial Grade ZEK100 Magnesium Alloy Sheet over a Wide Range of Strain Rates 2014
Fabrication and Characterization of Naturally Selected Epitaxial Fe-{111} Y2Ti2O7 Mesoscopic Interfaces: Some Potential Implications to Nano-Oxide Dispersion-Strengthened Steels 2013
Influence of Microstructural Length Scale on the Strength and Annealing Behavior of Pearlite, Bainite, and Martensite 2013
A Molecular Dynamics Simulation Study of the Cavitation Pressure in Liquid Al 2012
Microstructure Evolution during Roller Hemming of AZ31B Magnesium Sheet 2012
Resistance Microwelding of Ti-55.8 wt pct Ni Nitinol Wires and the Effects of Pseudoelasticity 2012
ALEMI: A Ten-Year History of Discussions of Alloying-Element Interactions with Migrating Interfaces 2011
Stability of Retained Austenite in High-Al, Low-Si TRIP-Assisted Steels Processed via Continuous Galvanizing Heat Treatments 2011
Effect of Chemistry on Nonisothermal Tempering and Softening of Dual-Phase Steels 2011
Localized Recrystallization in Cast Al-Si-Mg Alloy during Solution Heat Treatment: Dilatometric and Calorimetric Studies 2011
Deformation and Fracture Behavior of Alumina Particle-Reinforced Al 6061-T6 Composite during Dynamic Mechanical Loading 2007
A comparative study of fatigue properties of two face-centered-cubic metals 2006
Dislocation boundary width changes due to cyclic hardening 2006
The growth of ferrite in Fe-C-X alloys: The role of thermodynamics, diffusion, and interfacial conditions 2006
Effects of Au plating on dynamic resistance during small-scale resistance spot welding of thin Ni sheets 2005
Bonding mechanism in ultrasonic gold ball bonds on copper substrate 2005
Eutectic solidification of aluminum-silicon alloys 2004
Studies of the influence of alloying elements on the growth of ferrite from austenite under decarburization conditions: Fe-C-Nl alloys 2004
The diffusional formation of ferrite from austenite in Fe-C-Ni alloys 2004
Microstructural study of Ti50Pd50 and Ti50Ni50−xPdx alloys produced by combustion synthesis 1992
Analysis of Aluminum–Cerium Based Conductor Die-Casting Alloys for High Performance Electric Vehicle Powertrain Applications. 55:4704-4720. 2024
Effect of Time and Temperature on the Microstructural Evolution of Wide-Gap Brazed MAR-M247 Nickel Superalloy Using BNi-9 Braze Alloy. 55. 2024
Numerical-Experimental Assessment of the Semi-Solid Contraction Behavior of Grain-Refined High Strength Aluminum Alloy, B206. 55:3164-3171. 2024
Shear-Coupled Multiaxial Deformation Behavior of Rolled AZ31B Magnesium Alloy. 55:2790-2810. 2024
A Constitutive Model of Tensile Deformation of a Metastable Medium-Entropy Alloy. 54:2519-2524. 2023
On the Selective Oxidation of a 0.15C-6Mn-2Al-1Si Third-Generation Advanced High Strength Steel During Two-Stage Annealing Treatments. 54:1296-1319. 2023
Advanced Characterization of Precipitation and Microstructure Heterogeneity in X70 Steel. 54:768-775. 2023
The Effect of Zinc Coating Type on the Morphology, Joint Geometry, and Mechanical Properties of Weld-Brazed Thin-Gauge Automotive Steel. 54:179-195. 2023
Laser Alloying as an Effective Way to Fabricate NiTiPt Shape Memory Alloys. 52:4368-4378. 2021
On the Decarburization of Surface Pearlite. 52:3198-3203. 2021
Effect of Heat Treatment on Microstructure Evolution of X38CrMoV5-1 Hot-Work Tool Steel Produced by L-PBF. 52:2564-2575. 2021
Mechanical Properties of Ausformed Carbide-Free Bainite. 52:2402-2410. 2021
In Situ Study on Interrupted Growth Behavior and Crystallography of Bainite. 52:817-825. 2021
Microstructural Evolution During Deformation of a QP980 Steel. 51:4524-4539. 2020
Microstructure, Intermetallic Phases, and Fractography of the Cast Al-5.8Zn-2.2Mg-2.5Cu Alloy by Controlled Diffusion Solidification. 51:4711-4726. 2020
Evolution of Transient Nature Nanoscale Softening During Martensite Tempering. 51:3772-3777. 2020
Role of Random and Coincidence Site Lattice Grain Boundaries in Liquid Metal Embrittlement of Iron (FCC)-Zn Couple. 51:3938-3944. 2020
Strain Localization During Compressive Deformation of Mg-Gd Alloy. 51:3742-3748. 2020
The Role of Internal Oxides on the Liquid Metal Embrittlement Cracking During Resistance Spot Welding of the Dual Phase Steel. 51:2180-2191. 2020
Mn3O4 and (ZnFe)OOH Composites for Supercapacitors with High Active Mass. 51:855-862. 2020
Austenite Grain Growth in High Manganese Steels. 50:5760-5766. 2019
The Effect of Pulse Energy on the Defects and Microstructure of Electro-Spark-Deposited Inconel 718. 50:4223-4231. 2019
Dynamic Tensile Behavior of Fiber Laser Welds of Medium Manganese Transformation-Induced Plasticity Steel. 50:3578-3588. 2019
Effect of Solute Nb on Grain Growth in Fe-30 Pct Mn Steel. 50:3674-3682. 2019
Effect of Sn Addition, Process Atmosphere pO2, and Annealing Time on the Selective Oxidation of a C-2Mn-1.7Si (Wt Pct) Advanced High-Strength Steel During Continuous Galvanizing. 50:2898-2911. 2019
Effect of Mn and C on Grain Growth in Mn Steels. 50:905-914. 2019
Effect of Strain Rate on the Bainitic Transformation in Fe-C-Mn-Si Medium-Carbon Bainitic Steels. 50:573-580. 2019
Effect of Direct Aging on Heat-Affected Zone and Tensile Properties of Electrospark-Deposited Alloy 718. 50:285-294. 2019
Strain-Path Dependence of $$ \{ 10\bar{1}2\} $$ Twinning in a Rolled Mg–3Al–1Zn Alloy: Influence of Twinning Model. 50:118-131. 2019
Effect of Process Atmosphere Dew Point and Tin Addition on Oxide Morphology and Growth for a Medium-Mn Third Generation Advanced Steel During Intercritical Annealing. 49:5561-5573. 2018
Selective Oxidation of a C-2Mn-1.3Si (Wt Pct) Advanced High-Strength Steel During Continuous Galvanizing Heat Treatments. 49:5546-5560. 2018
Characterization of the Isothermal Precipitation Kinetics of an Al-Zn-Mg-Cu Alloy. 49:5157-5168. 2018
Effects of Carbon Variation on Microstructure Evolution in Weld Heat-Affected Zone of Nb-Ti Microalloyed Steels. 49:4824-4837. 2018
Multi-scale Examination of the Microstructure Evolution of AZ31 During Multi-pass Cross-Rolling. 49:3674-3682. 2018
Quantitative Experimental Study of Defects Induced by Process Parameters in the High-Pressure Die Cast Process. 49:3080-3090. 2018
Selective Oxidation of a 0.1C-6Mn-2Si Third Generation Advanced High-Strength Steel During Dew-Point Controlled Annealing. 49:1795-1808. 2018
A Combined Numerical–Experimental Approach to Quantify the Thermal Contraction of A356 During Solidification. 48:3370-3376. 2017
Foreword. 48:2713-2713. 2017
Effect of Nb Addition to Ti-Bearing Super Martensitic Stainless Steel on Control of Austenite Grain Size and Strengthening. 48:2460-2471. 2017
Study and Applications of Dynamic Resistance Profiles During Resistance Spot Welding of Coated Hot-Stamping Steels. 48:745-758. 2017
Effect of Surface Modification on Cumulative Tensile Ductility of AZ31 Magnesium Sheet. 47:6017-6031. 2016
In-Situ Study of the Tensile Deformation and Fracture Modes in Peak-Aged Cast Mg-11Y-5Gd-2Zn-0.5Zr (Weight Percent). 47:6438-6452. 2016
Evaluation of Cooling Rate Effects on the Mechanical Properties of Die Cast Magnesium Alloy AM60. 47:5159-5168. 2016
On the Study of the Sheet Bendability in AA5754-O Temper Alloy. 47:5203-5213. 2016
Phase Transformation Behavior of Medium Manganese Steels with 3 Wt Pct Aluminum and 3 Wt Pct Silicon During Intercritical Annealing. 47:4869-4882. 2016
Application of a Pore Fraction Hot Tearing Model to Directionally Solidified and Direct Chill Cast Aluminum Alloys. 47:4217-4225. 2016
Mechanism of Austenite Formation from Spheroidized Microstructure in an Intermediate Fe-0.1C-3.5Mn Steel. 47:3375-3386. 2016
The Effect of Porosity on Fatigue of Die Cast AM60. 47:3464-3472. 2016
Molecular Dynamics Study of Solute Pinning Effects on Grain Boundary Migration in the Aluminum Magnesium Alloy System. 47:1889-1897. 2016
Analysis of Surface Roughening in AA6111 Automotive Sheet Under Pure Bending. 47:949-960. 2016
An Innovative Two-Stage Reheating Process for Wrought Aluminum Alloy During Thixoforming. 46:4191-4201. 2015
Numerical Assessment of the Role of Slip and Twinning in Magnesium Alloy AZ31B During Loading Path Reversal. 46:3079-3090. 2015
Relationship Between Recrystallization Kinetics and the Inhomogeneity of Stored Energy. 46:2975-2985. 2015
Microstructure Characterization and Thermal Analysis of Aluminum Alloy B206 During Solidification. 46:2073-2081. 2015
Model Fe-Al Steel with Exceptional Resistance to High Temperature Coarsening. Part I: Coarsening Mechanism and Particle Pinning Effects. 46:178-189. 2015
Model Fe-Al Steel with Exceptional Resistance to High Temperature Coarsening. Part II: Experimental Validation and Applications. 46:190-198. 2015
Mechanism of Secondary Hardening in Rapid Tempering of Dual-Phase Steel. 45:6153-6162. 2014
Deformation Mapping and the Role of Carbides on the Microstructure and Properties of Evolved Adiabatic Shear Bands. 45:5379-5396. 2014
Effects of Interfacial Lattice Mismatching on Wetting of Ni-Plated Steel by Magnesium. 45:5749-5766. 2014
Superledge Model for Interphase Precipitation During Austenite-to-Ferrite Transformation. 45:5351-5361. 2014
Effect of Ca Addition on the Intensity of the Rare Earth Texture Component in Extruded Magnesium Alloys. 45:4698-4709. 2014
Effect of Process Variables on the Grain Size and Crystallographic Texture of Hot-Dip Galvanized Coatings. 45:3938-3953. 2014
Dissimilar Laser Joining of NiTi SMA and MP35N Wires. 45:3533-3544. 2014
Mechanical Behavior of Carbide-free Medium Carbon Bainitic Steels. 45:1352-1361. 2014
An Experimental Study of Transient Liquid Phase Bonding of the Ternary Ag-Au-Cu System Using Differential Scanning Calorimetry. 44:3708-3720. 2013
Effects of Heat Treatment on Grain-Boundary β-Mg17Al12 and Fracture Properties of Resistance Spot-Welded AZ80 Mg Alloy. 44:3747-3756. 2013
Foreword. 44:3434-3435. 2013
Quantifying the Solute Drag Effect on Ferrite Growth in Fe-C-X Alloys Using Controlled Decarburization Experiments. 44:3472-3483. 2013
Self-Consistent Model for Planar Ferrite Growth in Fe-C-X Alloys. 44:3456-3471. 2013
Morphology and Growth Kinetic Advantage of Quenched Twinned Dendrites in Al-Zn Alloys. 44:2699-2706. 2013
Influence of Microstructure on Uniaxial Strain Localization in AA5754 Aluminum Sheets Produced by Various Processing Routes. 44:2382-2398. 2013
A Novel Approach to Model Static Recrystallization of Austenite During Hot Rolling of Nb Microalloyed Steel. Part I: Precipitate-Free Case. 44:1862-1871. 2013
Thermochemical Analysis of Phases Formed at the Interface of a Mg alloy-Ni-plated Steel Joint during Laser Brazing. 44:1937-1946. 2013
Room Temperature Shear Band Development in Highly Twinned Wrought Magnesium AZ31B Sheet. 44:512-516. 2013
Characterization and Modeling of Precipitation Kinetics in a Fe-Si-Ti Alloy. 43:4999-5008. 2012
Determination of the Minimum Scan Size to Obtain Representative Textures by Electron Backscatter Diffraction. 43:5298-5307. 2012
Studies on Nb Microalloying of 13Cr Super Martensitic Stainless Steel. 43:4475-4486. 2012
Vacancy Behavior and Solute Cluster Growth During Natural Aging of an Al-Mg-Si Alloy. 43:4507-4513. 2012
Three-Dimensional (3-D) Atom Probe Tomography of a Cu-Precipitation-Strengthened, Ultrahigh-Strength Carburized Steel. 43:3626-3635. 2012
Selective Oxidation and Reactive Wetting During Hot-Dip Galvanizing of a 1.0 pct Al-0.5 pct Si TRIP-Assisted Steel. 43:2426-2441. 2012
Fiber Laser Welded AZ31 Magnesium Alloy: The Effect of Welding Speed on Microstructure and Mechanical Properties. 43:2133-2147. 2012
Texture Modification During Extrusion of Some Mg Alloys. 43:2148-2157. 2012
Crossed-Wire Laser Microwelding of Pt-10 Pct Ir to 316 LVM Stainless Steel: Part II. Effect of Orientation on Joining Mechanism. 43:1234-1243. 2012
Crossed-Wire Laser Microwelding of Pt-10 Pct Ir to 316 Low-Carbon Vacuum Melted Stainless Steel: Part I. Mechanism of Joint Formation. 43:1223-1233. 2012
Microstructure Refinement After the Addition of Titanium Particles in AZ31 Magnesium Alloy Resistance Spot Welds. 43:598-609. 2012
Recrystallization, Precipitation Behaviors, and Refinement of Austenite Grains in High Mn, High Nb Steel. 43:665-676. 2012
Evolution of Precipitate Microstructure During Creep of an AA7449 T7651 Aluminum Alloy. 42:3934-3940. 2011
Kinetics of Delta-Ferrite to Austenite Phase Transformation in a Two-Phase Fe-Al-C Alloy. 42:3349-3357. 2011
Spatial and Temporal Characteristics of Propagating Deformation Bands in AA5182 Alloy at Room Temperature. 42:3358-3369. 2011
Tempering of Martensite in Dual-Phase Steels and Its Effects on Softening Behavior. 42:3115-3129. 2011
Selective Oxidation and Reactive Wetting during Galvanizing of a CMnAl TRIP-Assisted Steel. 42:2753-2768. 2011
Effect of Shrinkage on Primary Dendrite Arm Spacing during Binary Al-Si Alloy Solidification. 42:2331-2345. 2011
Favorable Environment for a Nondendritic Morphology in Controlled Diffusion Solidification. 42:2456-2465. 2011
Mechanical and Functional Properties of Laser-Welded Ti-55.8 Wt Pct Ni Nitinol Wires. 42:2166-2175. 2011
Sensitivity of Thermophysical Material Properties on Solidification Simulation of Al-Si Binary Alloys. 42:2346-2357. 2011
Microstructure and Mechanical Properties of Fiber-Laser-Welded and Diode-Laser-Welded AZ31 Magnesium Alloy. 42:1974-1989. 2011
Mechanical Properties and Microstructural Evolution of Friction-Stir-Welded Thin Sheet Aluminum Alloys. 42:1283-1295. 2011
The Sequence of Intermetallics Formation during the Solidification of an Al-Mg-Si Alloy Containing La. 42:825-833. 2011
Simulation of Semi-Solid Material Mechanical Behavior Using a Combined Discrete/Finite Element Method. 42:239-248. 2011
As-Cast Residual Stresses in an Aluminum Alloy AA6063 Billet: Neutron Diffraction Measurements and Finite Element Modeling. 41:3396-3404. 2010
Resistance Spot Welded AZ31 Magnesium Alloys, Part II: Effects of Welding Current on Microstructure and Mechanical Properties. 41:2642-2650. 2010
The Mechanisms of Resistance Spot Welding of Magnesium to Steel. 41:2651-2661. 2010
Softening Kinetics in the Subcritical Heat-Affected Zone of Dual-Phase Steel Welds. 41:2348-2356. 2010
Modeling the Stress-Strain Behavior and Hot Tearing during Direct Chill Casting of an AZ31 Magnesium Billet. 41:2067-2077. 2010
Study of Grain-Growth Kinetics in Delta-Ferrite and Austenite with Application to Thin-Slab Cast Direct-Rolling Microalloyed Steels. 41:2112-2120. 2010
Effect of Continuous Galvanizing Heat Treatments on the Microstructure and Mechanical Properties of High Al-Low Si Transformation Induced Plasticity Steels. 41:1460-1473. 2010
Resistance-Spot-Welded AZ31 Magnesium Alloys: Part I. Dependence of Fusion Zone Microstructures on Second-Phase Particles. 41:1511-1522. 2010
Selective Oxidation and Reactive Wetting of 1.0 Pct Si-0.5 Pct Al and 1.5 Pct Si TRIP-Assisted Steels. 41:1539-1553. 2010
Connectivity of Phases and Growth Mechanisms in Peritectic Alloys Solidified at Low Speed: an X-Ray Tomography Study of Cu-Sn. 41:563-567. 2010
Void Nucleation and Growth in Dual-Phase Steel 600 during Uniaxial Tensile Testing. 40:3117-3127. 2009
Phenomenological Model for Deformation-Induced Ferrite Transformation. 40:2273-2282. 2009
Formability Analysis of Diode-Laser-Welded Tailored Blanks of Advanced High-Strength Steel Sheets. 40:1955-1967. 2009
Mechanisms and Modeling of Bake-Hardening Steels: Part II. Complex Loading Paths. 40:1375-1382. 2009
Bonding Mechanisms in Resistance Microwelding of 316 Low-Carbon Vacuum Melted Stainless Steel Wires. 40:910-919. 2009
Quantification of Rapidly Solidified Microstructure of Al-Fe Droplets Using Correlation Length Analysis. 40:196-203. 2009
Quantitative Assessment of Deformation-Induced Damage in a Semisolid Aluminum Alloy via X-ray Microtomography. 39:2459-2469. 2008
Morphology and Kinetics of Interfacial Layer Formation during Continuous Hot-Dip Galvanizing and Galvannealing. 39:2128-2142. 2008
On the Calculation of Volume Fraction of Texture Components in AA5754 Sheet Materials. 39:2007-2013. 2008
Transmission Electron Microscopy and Nanoindentation Study of the Weld Zone Microstructure of Diode-Laser-Joined Automotive Transformation-Induced Plasticity Steel. 39:593-603. 2008
Quantifying the Solute Drag Effect of Cr on Ferrite Growth Using Controlled Decarburization Experiments. 38:2950-2955. 2007
Multiscale Analysis of the Strength and Ductility of AA 6056 Aluminum Friction Stir Welds. 38:964-981. 2007
The Effect of Nb on the Recrystallization and Grain Growth of Ultra-High-Purity α-Fe: A Combinatorial Approach. 38:821-830. 2007
Development of a heterogeneous microstructurally based finite element model for the prediction of forming limit diagram for sheet material. 37:3489-3501. 2006
A study of transient liquid-phase bonding of Ag-Cu using differential scanning calorimetry. 37:2493-2504. 2006
Authors’ reply to reply of discussion on “nucleation mechanism of eutectic phases in aluminum-silicon hypoeutectic alloys”. 37:1353-1356. 2006
Effect of asymmetric rolling on the texture and mechanical properties of AA6111-aluminum sheet. 36:3141-3149. 2005
Recrystallization of stabilized ferritic stainless steel sheet. 36:3205-3215. 2005
Interfacial phenomena and joint strength in resistance microwelding of crossed Au-plated Ni wires. 36:2717-2724. 2005
Authors’ reply. 36:1613-1617. 2005
Discussion of “Nucleation mechanism of eutectic phases in aluminum-silicon hypoeutectic alloys”. 36:1612-1613. 2005
Mechanism of resistance microwelding of crossed fine nickel wires. 35:3165-3176. 2004
The effect of grain size on low-cycle fatigue behavior of Al-2024 polycrystalline alloy. 35:2725-2728. 2004
Casting of aluminum-based wrought alloys using controlled diffusion solidification. 35:2174-2180. 2004
Effect of thermomechanical treatment on the evolution of rolling and recrystallization textures in twin-belt cast AA5754 aluminum alloy. 35:1839-1851. 2004
Effect of thermomechanical processing on grain structure development in a twin-belt strip cast automotive aluminum alloy. 35:949-952. 2004
Electrode pitting in resistance spot welding of aluminum alloy 5182. 35:217-226. 2004
Precipitation strengthening of the aluminum alloy AA6111. 34:2913-2924. 2003
The influence of precipitation on the work-hardening behavior of the aluminum alloys AA6111 and AA7030. 34:2473-2481. 2003
Effects of TiC composite coating on electrode degradation in microresistance welding of nickel-plated steel. 34:1501-1511. 2003
Focused ion beam milling: A practical method for preparing cast Al-Si alloy samples for transmission electron microscopy. 34:705-707. 2003
Effects of au plating on small-scale resistance spot welding of thin-sheet nickel. 33:2667-2676. 2002
A new hybrid process for surface modification by combining brush plating with nitrocarburizing. 33:2240-2244. 2002
Pulsed Nd:YAG laser welding of copper using oxygenated assist gases. 33:2019-2030. 2002
Formation of a TiB2-reinforced copper-based composite by mechanical alloying and hot pressing. 33:1275-1280. 2002
Processing and microstructural characterization of Al-Cu alloys produced from rapidly solidified powders. 31:249-260. 2000
Ductilization of a powder metallurgy Al-17 wt pct Cu by means of channel-die compression and extrusion. 29:2613-2620. 1998
Crystal plasticity forming limit diagram analysis of rolled aluminum sheets. 29:527-535. 1998
Precipitation behavior in a medium carbon, ti-v-n microalloyed steel. 27:1149-1165. 1996
Microstructure of the Ti3Al(Nb)/TiB composite produced by combustion synthesis. 26:3037-3043. 1995
Precipitation effects during hot deformation of a copper alloy. 25:257-266. 1994
Mathematical model of phase transformations and elastoplastic stress in the water spray quenching of steel bars. 24:795-808. 1993
The mechanical behavior of directionally solidified Al-Ni in compression. 24:713-719. 1993
Dislocation substructure evolution in torsion of pure copper. 24:361-367. 1993
Liquid- solid interface migration at grain boundary regions during transient liquid phase brazing. 23:2905-2915. 1992
Effect of plastic deformation on residual stresses in ceramic/metal interfaces. 22:2822-2825. 1991
On the analysis of delamination fractures in high-strength steels. 21:2565-2575. 1990
The interaction of reaction-bonded silicon carbide and inconel 600 with a nickel-based brazing alloy. 20:1803-1810. 1989
Creep crack growth simulation under transient stress fields. 19:829-835. 1988
Superplastic behavior of a zn-22 pct ai-0.5 pct cu alloy. 17:1873-1875. 1986
Plastic flow in dispersion hardened materials. 16:2191-2200. 1985
The Co-Cr-S ternary system at 1223 K and applications to corrosion. 16:503-510. 1985
Compositional effects on the creep ductility of a low alloy steel. 11:1827-1836. 1980
Measurement of the solubility of hydrogen in solid magnesium. 6:1915-1917. 1975
Contribution of grain boundary diffusion and capillarity forces to the diffusional creep of wires or fibers. 6:265-270. 1975

Metallurgical and Materials Transactions A Journal

Overview

publication venue for

has subject area

Identity

International Standard Serial Number (ISSN)

Electronic International Standard Serial Number (EISSN)