publication venue for
- Electrophoretic deposition of organic–inorganic nanocomposites 2006
- In situ sampling uncovers the dynamics of particle genesis and growth in an aerosol tube reactor 2006
- Effect of structure on the creep of open-cell nickel foams 2005
- Potential applications for steel and titanium metal foams 2005
- Surface activated bonding of LCP/Cu for electronic packaging 2005
- Atomistic simulations of reactive wetting in metallic systems 2005
- Mechanisms and kinetics of recrystallisation: A two dimensional vertex dynamics simulation 2001
- Investigating the mechanism of zinc-induced liquid metal embrittlement crack initiation in austenitic microstructure. 58:15314-15335. 2023
- Refining the hierarchical structure of lath martensitic steel by in situ alloying with nickel: morphology, crystallography, and mechanical properties. 57:20867-20894. 2022
- Current international research into cellulose as a functional nanomaterial for advanced applications. 57:5697-5767. 2022
- Low-temperature synthesis of manganese oxide–carbon nanotube-enhanced microwave-absorbing nanocomposites. 53:16288-16302. 2018
- In situ observation of deformation behavior of chain aggregate inclusions: a case study for Al2O3 at a liquid steel/argon interface. 53:13203-13215. 2018
- Interaction between primary dendrite arm spacing and velocity of fluid flow during solidification of Al–Si binary alloys. 53:9771-9789. 2018
- Morphology of cross-linked cellulose nanocrystal aerogels: cryo-templating versus pressurized gas expansion processing. 53:9842-9860. 2018
- Properties of microinjection-molded multi-walled carbon nanotubes-filled poly(lactic acid)/poly[(butylene succinate)-co-adipate] blend nanocomposites. 53:9013-9025. 2018
- Annealing of silicon carbonitride nanostructured thin films: interdependency of hydrogen content, optical, and structural properties. 53:1497-1513. 2018
- Chemical vapor deposition-based growth of aligned ZnO nanowires on polycrystalline Zn2GeO4:Mn substrates. 52:9324-9334. 2017
- Manganese dioxide–carbon nanotube composite electrodes with high active mass loading for electrochemical supercapacitors. 52:3687-3696. 2017
- Metallurgical characterization of coupled carbon diffusion and precipitation in dissimilar steel welds. 51:4864-4879. 2016
- On ball-milled ODS ferritic steel recrystallization: From as-milled powder particles to consolidated state. 50:2202-2217. 2015
- Evolution of microstructure and strength during the ultra-fast tempering of Fe–Mn–C martensitic steels. 49:7782-7796. 2014
- Modeling the influence of particulate geometry on the thermal conductivity of composites. 49:5586-5597. 2014
- TEM investigations of the oxide layers formed on a 316L alloy in simulated PWR environment. 48:2861-2871. 2013
- Effect of mixing rate on the morphology of primary Al phase in the controlled diffusion solidification (CDS) process. 47:8153-8166. 2012
- Influence of severe plastic deformation on the precipitation hardening of a FeSiTi steel. 47:7939-7945. 2012
- Reinforcement of Ag nanoparticle paste with nanowires for low temperature pressureless bonding. 47:6801-6811. 2012
- Supersaturated α-iron in vapour-deposited Fe–C thin films. 47:6939-6947. 2012
- Conversion of copper and manganese metallic films to spinel coating. 47:5205-5215. 2012
- Microstructure evolution of Mg-3%Al-1%Zn alloy tube during warm bending. 47:3801-3807. 2012
- Modelling the effect of carbon on deformation behaviour of twinning induced plasticity steels. 46:7410-7414. 2011
- Phase quantification of impulse atomized Al68.5Ni31.5 alloy. 46:6235-6242. 2011
- Design and characterization of a lamellar nanostructure in a low C steel. 46:2764-2770. 2011
- C–S–H/polyaniline nanocomposites prepared by in situ polymerization. 46:460-467. 2011
- Quantitative evaluation of high temperature deformation mechanisms: a specific microgrid extensometry technique coupled with EBSD analysis. 45:5649-5659. 2010
- A study on heat affected zone softening in resistance spot welded dual phase steel by nanoindentation. 45:1638-1647. 2010
- Cyclic oxidation and wear of tungsten rods in contact with glass in atmospheric air. 45:688-700. 2010
- In situ high-temperature X-ray and neutron diffraction of Cu–Mn oxide phases. 45:1056-1064. 2010
- On the essential work of fracture in polymer–metal multilayers. 44:5537-5543. 2009
- Development of an experimental technique to assess the permeability of metal coated polymer films. 44:4692-4699. 2009
- Erratum to: In situ sampling uncovers the dynamics of particle genesis and growth in an aerosol tube reactor. 44:2426-2426. 2009
- In-situ sampling uncovers the dynamics of particle genesis and growth in an aerosol tube reactor. 44:2419-2425. 2009
- Effect of Ce and La on microstructure and properties of a 6xxx series type aluminum alloy. 43:7157-7164. 2008
- Addendum. 42:9913-9913. 2007
- A comparative study of the volume stability of C–S–H (I) and Portland cement paste in aqueous salt solutions. 42:6837-6846. 2007
- Effects of oxygen contamination in the argon shielding gas in laser welding of commercially pure titanium thin sheet. 40:3437-3443. 2005
- Reply to: Comment to "electrophoretic deposition-mechanisms, myths and materials" by P.M. Biesheuvel and H. Verweij. 39:7082-7083. 2004
- Electrophoretic deposition of electrolyte materials for solid oxide fuel cells. 39:825-831. 2004
- Electrophoretic deposition—mechanisms, myths and materials. 39:787-801. 2004
- The use of compacts for durability investigation of cement-based materials. 38:4957-4964. 2003
- New analysis of peeling data from paper. 22:265-266. 2003
- Ultraviolet photoelectron spectroscopy of quantum-well nano-cathode for organic light-emitting diodes. 22:1415-1417. 2003
- Anisotropic trivalent ion conducting behavior in single crystals of aluminum tungstate-scandium tungstate solid solution. 37:3483-3487. 2002
- Atomic-scale simulation study of equilibrium solute adsorption at alloy solid-liquid interfaces. 10:149-158. 2002
- Atomistic simulation methods for computing the kinetic coefficient in solid-liquid systems. 10:181-189. 2002
- Analytical modeling of isothermal solidification during transient liquid phase (TLP) bonding. 20:841-844. 2001
- Photopolymerization behavior of di(meth)acrylate oligomers. 36:3599-3605. 2001
- Sequence of precipitation in 339 aluminum castings. 36:461-468. 2001
- Precipitation in 339 and 2124 aluminum: a caveat for calorimetry. 35:3871-3880. 2000
- Characterization of the damage in nanocomposite materials by ac electrical properties: experiment and simulation. 34:1753-1759. 1999
- Electrolytic TiO2-RuO2 deposits. 34:2441-2447. 1999
- Reduced mobility of triple nodes and lines on grain growth in two and three dimensions. 7:285-295. 1999
- Studies on the growth of voids in amorphous glassy polymers. 33:3163-3175. 1998
- Combustion synthesis and mechanical properties of molybdenum disilicide composites reinforced with SiC particulate. 33:2319-2330. 1998
- Atomic force microscope study of crater formation in ion bombarded polymer. 33:3525-3528. 1998
- Characterization of zirconium, lanthanum and lead oxide deposits prepared by cathodic electrosynthesis. 33:699-705. 1998
- Electrophoretic deposition of chemically bonded ceramics in the system CaO-SiO2-P2O5. 17:2101-2104. 1998
- The structure and properties of spray formed cold rolling mill work roll steels. 33:3233-3244. 1998
- Electrochemical Al2O3-Cr2O3 alloy coatings on non-oxide ceramic substrates. 32:5205-5213. 1997
- Electrochemical Al2O3-ZrO2 composite coatings on non-oxide ceramic substrates. 32:389-400. 1997
- Electrolytic PZT films. 32:803-807. 1997
- High-resolution transmission electron microscopy investigation of a stacking fault in beta-Si3N4. 32:1431-1436. 1997
- The mechanical properties of friction welded aluminium-based metal-matrix composite materials. 32:3883-3889. 1997
- Effects of ageing on the thermal conductivity of a silicon carbide particulate reinforced 6061 aluminium composite. 15:369-371. 1996
- Electrodeposition of ceramic films from non-aqueous and mixed solutions. 30:5307-5312. 1995
- Counteraction of particulate segregation during transient liquid-phase bonding of aluminium-based MMC material. 30:1075-1082. 1995
- Electrochemical preparation of PbO films. 14:807-810. 1995
- Electrolytic deposition of ZrTiO4 films. 14:60-62. 1995
- Microstructural evolution of sol-gel-derived phosphosilicate gel with heat treatment. 29:2531-2535. 1994
- Characterization of a titanium diboride particulate-reinforced aluminium composite produced by anin situ reaction technique. 13:30-33. 1994
- The influence of base metal grain size on isothermal solidification during transient liquid-phase brazing of nickel. 28:6427-6432. 1993
- Particle incorporation by melt stirring for the production of metal-matrix composites. 28:2459-2465. 1993
- The surface morphology of atomic layer deposited magnesia. 12:1444-1446. 1993
- Characterization of graphite-aluminium composites using analytical electron microscopy. 27:1827-1841. 1992
- Effect of heating rate on the combustion synthesis of Ti-Al intermetallic compounds. 27:6797-6806. 1992
- Mechanical and tribological properties of zinc-aluminium metal-matrix composites. 27:5681-5691. 1992
- TEM study of microstructure development during low-cycle fatigue of an overaged Al-Mg-Si alloy. 27:399-407. 1992
- Brazing of reaction-bonded silicon carbide and Inconel 600 with an iron-based alloy. 25:4804-4809. 1990
- Fatigue of Al-Li alloys: mechanical properties, microstructure (TEM and SEM) and strain localization. 25:3053-3060. 1990
- The mechanical properties of laminated microscale composites of Al/Al2O3. 25:1603-1609. 1990
- Coverage of rough substrates by ZnS using vacuum evaporation and atomic layer epitaxy. 24:3164-3168. 1989
- Melt-grown sphene (CaTiSiO5) crystals. 5:979-980. 1986
- Study of precipitation and fracture in air-cast Mn-Al-C magnets. 4:1313-1316. 1985
- An evaluation of available data for strain-enhanced grain growth during superplastic flow. 3:395-399. 1984
- Heat treatment of explosively consolidated molybedenum: TEM studies. 3:15-17. 1984
- Fracture of a brittle particulate composite. 14:1657-1661. 1979
- Fracture of a brittle particulate composite. 14:1413-1420. 1979
- Crack shape studies in brittle porous materials. 12:987-989. 1977