Industrial Engineering & Automation
Concept
Vocabulary Service
Overview
subject area of
-
3D Finite Element Analysis for the High Speed Machining of Hardened Steel Conference Paper
-
5G Applications of Intelligent Manufacturing Scenarios Academic Article
-
A Comparative Study of the Variable Structure Filter Conference Paper
-
A Comparison Between Hardness-Scaling and Ball-Indentation Techniques on Predicting Stress/Strain Distribution and Failure Behavior of Resistance Spot Welded Advanced High Strength Steel Academic Article
-
A Control-Oriented Model for Dynamics From Fuel Injection Profile to Intake Gas Conditions in Diesel Engines Academic Article
-
A GRINDING-BASED MANUFACTURING METHOD FOR SILICON WAFERS: DECOMPOSITION ANALYSIS OF WAFER SURFACES Academic Article
-
A Kinematic Control Framework for Single-Slave Asymmetric Teleoperation Systems Academic Article
-
A Metadata Inference Method for Building Automation Systems With Limited Semantic Information Academic Article
-
A Model for Chip Formation During Machining of Hardened Steel Academic Article
-
A Multiagent-Based Decision-Making System for Semiconductor Wafer Fabrication With Hard Temporal Constraints Academic Article
-
A New Robust Filtering Strategy for Linear Systems Academic Article
-
A New Type of Motor: Pneumatic Step Motor Academic Article
-
A Phenomenological Model of Resistance Spot Welding on Liquid Metal Embrittlement Severity Using Dynamic Resistance Measurement Academic Article
-
A Pneumatically Actuated Target Stabilization Device for MRI-Guided Breast Biopsy Academic Article
-
A Predictive Energy Management Strategy for Hybrid Electric Powertrain With a Turbocharged Diesel Engine Academic Article
-
A REAL-TIME EMG-DRIVEN ARM WRESTLING ROBOT CONSIDERING MOTION CHARACTERISTICS OF HUMAN UPPER LIMBS Academic Article
-
A Sensor-Driven Approach to Distributed Shop Floor Planning and Control Conference Paper
-
A Strategy for the Compensation of Errors in Five-Axis Machining Academic Article
-
A Web-Based Approach to Real-Time Machine Condition Monitoring and Control Conference Paper
-
A Zakai equation derivation of the extended Kalman filter Academic Article
-
A balanced and weighted alignment network for partial transfer fault diagnosis Academic Article
-
A bio-inspired scan matching algorithm for mobile robots in outdoor environments Academic Article
-
A chip formation based analytic force model for oblique cutting Academic Article
-
A comparison study of three degree-of-freedom parallel robotic machine tools with/without actuation redundancy Academic Article
-
A conditional value-at-risk based methodology to intermediate-term planning of crude oil tanker fleet Academic Article
-
A continuous-time linear tracking problem with an asymmetric quadratic objective functional containing a cost-free interval. Academic Article
-
A decomposition technique for an optimal control problem with "PQDZ" cost and bounded controls Academic Article
-
A discrete whale swarm algorithm for hybrid flow-shop scheduling problem with limited buffers Academic Article
-
A dynamic spare parts ordering and pricing policy based on stochastic programming with multi-choice parameters Academic Article
-
A feature-based method for NC machining time estimation Academic Article
-
A hierarchical federated integration architecture for collaborative product development Academic Article
-
A hybrid Jaya algorithm for solving flexible job shop scheduling problem considering multiple critical paths Academic Article
-
A hybrid control design for stabilisation of nonlinear systems from the null controllable region* Academic Article
-
A hybrid experimental and simulation approach to evaluate the calibration of tool wear rate models in machining Academic Article
-
A hybrid framework for integrating multiple manufacturing clouds Academic Article
-
A mechanistic force model of the 5-axis milling process Academic Article
-
A method for transformation of engineering bill of materials to maintenance bill of materials Academic Article
-
A multi-sensor strategy for tool failure detection in milling Academic Article
-
A new matrix decomposition for signal processing Academic Article
-
A novel double-mGBDT-based Q-learning Academic Article
-
A novel intelligent manufacturing mode with human-cyber-physical collaboration and fusion in the non-ferrous metal industry Academic Article
-
A novel iterative learning control formulation of generalized predictive control Academic Article
-
A novel post-processing approach towards improving hole accuracy and surface integrity in laser powder bed fusion of IN625 Academic Article
-
A novel representation of tandem systems with inter-stage storage applied to on-line system monitoring Academic Article
-
A novel robotic grasp detection method based on region proposal networks Academic Article
-
A pneumatic sensor for grinding wheel condition monitoring Academic Article
-
A problem in jointly optimal production and advertising decisions Academic Article
-
A pseudometric in supervisory control of probabilistic discrete event systems Academic Article
-
A real time machining error compensation method based on dynamic features for cutting force induced elastic deformation in flank milling Academic Article
-
A robust optimization approach to risk-averse routing of marine crude oil tankers Academic Article
-
A safe-parking and safe-switching framework for fault-tolerant control of switched nonlinear systems Academic Article
-
A sensor fusion and support vector machine based approach for recognition of complex machining conditions Academic Article
-
A size-structured model for the nutrient-driven self-cycling fermentation process Conference Paper
-
A smooth variable structure filter for state estimation Academic Article
-
A solid modeler based ball-end milling process simulation Academic Article
-
A strategy to improve tool life by controlling cohesive failure in thick TiAlN coating during turning of CGI Academic Article
-
A study of the relationship between thermal expansion and residual stresses in selective laser melting of Ti-6Al-4V Academic Article
-
A study of wear on coated PCBN tools when turning hardened AISI 4340 using FEM simulation Academic Article
-
A survey of Markovian methods for stability of networks Chapter
-
A survey of optimization methods for Block Relocation and PreMarshalling Problems Academic Article
-
A thermal model for hard precision turning Academic Article
-
A three-dimensional analytical cutting force model for micro end milling operation Academic Article
-
A trajectory‐based method for constructing null controllable regions Academic Article
-
A unified treatment of recursive digital filtering Academic Article
-
AR models for wideband source location Academic Article
-
ASME International Mechanical Engineering Congress and Exposition, Proceedings Journal
-
Abnormal situation detection, three-way data and projection methods; robust data archiving and modeling for industrial applications Academic Article
-
Accurate position control of a pneumatic actuator using on/off solenoid valves Academic Article
-
Acoustic emission signatures of electrical discharge machining Conference Paper
-
Acoustic emission spikes at workpiece edges in grinding: Origin and applications Academic Article
-
Active end effector control of a low precision robot in deburring Academic Article
-
Actuator and sensor fault isolation of nonlinear systems subject to uncertainty Academic Article
-
Acubot: a robot for radiological interventions Conference Paper
-
Adaptive Control for Intelligent Open Die Forging Conference Paper
-
Adaptive Force Control for Robotic Disk Grinding Academic Article
-
Adaptive Predictive Control of a data center cooling unit Academic Article
-
Adaptive compensation of quasi-static errors for an intrinsic machine Academic Article
-
Adaptive output-feedback Lyapunov-based model predictive control of nonlinear process systems Academic Article
-
Adaptive/Robust Control for Time-Delay Teleoperation Academic Article
-
Additive manufacturing infill optimization for automotive 3D-printed ABS components Academic Article
-
Advanced Robotics Journal
-
Agent-based simulation and optimization of hybrid flow shop considering multi-skilled workers and fatigue factors Academic Article
-
American Society of Mechanical Engineers, Dynamic Systems and Control Division (Publication) DSC Journal
-
American Society of Mechanical Engineers, Manufacturing Engineering Division, MED Journal
-
American Society of Mechanical Engineers, The Fluid Power and Systems Technology Division (Publication) FPST: Foreword Conference Paper
-
American Society of Mechanical Engineers, The Fluid Power and Systems Technology Division, FPST Journal
-
An Automated Planning, Control, and Inspection System for Robotic Deburring Academic Article
-
An Enhanced Dynamic Model in Turning Including the Effect of Ploughing Forces Academic Article
-
An Optimal control approach to marketing-production planning Academic Article
-
An Orientation Invariant Visual Homing Algorithm Academic Article
-
An agent-based service-oriented integration architecture for collaborative intelligent manufacturing Conference Paper
-
An analytical model for the optimized design of micro-textured cutting tools Academic Article
-
An approach to variable time receding horizon control Academic Article
-
An experimental investigation of surface integrity in selective laser melting of Inconel 625 Academic Article
-
An improved NSGA-II with local search for multi-objective integrated production and inventory scheduling problem Academic Article
-
An improved cutting force and surface topography prediction model in end milling Academic Article
-
An improved genetic algorithm for flexible job shop scheduling problem considering reconfigurable machine tools with limited auxiliary modules Academic Article
-
An improved process simulation system for ball-end milling of sculptured surfaces Academic Article
-
An in-depth investigation of the machining performance of Ti1-Xalxn PVD coatings during high-speed machining of 316 stainless steel Academic Article
-
An integrated approach for remote manipulation of a high-performance reconfigurable parallel kinematic machine Academic Article
-
An integrated fault diagnosis and safe-parking framework for fault-tolerant control of nonlinear systems Academic Article
-
An interactive algorithm for optimal control of a system with multiple criteria Academic Article
-
An interval-parameter mixed integer multi-objective programming for environment-oriented evacuation management Academic Article
-
An investigation into the behavior of the cutting forces in precision turning Academic Article
-
An investigation of a heat pipe cooling system for use in turning on a lathe Academic Article
-
An investigation of the effect of a new tool treatment technique on the machinability of Inconel 718 during the turning process Academic Article
-
An investigation of the use of heat pipes for machine tool spindle bearing cooling Academic Article
-
An optimal control problem with piecewise quadratic cost functional containing a ‘dead-zone’ Academic Article
-
Analysis and performance of slotted tools in electrical discharge drilling Academic Article
-
Analysis of Transients in an Adaptive Control Servomechanism for Milling With Constant Force Academic Article
-
Analysis of a model of the nutrient driven self-cycling fermentation process Academic Article
-
Analysis of rigid-disk wear during robotic grinding Academic Article
-
Analysis of stresses during exit in interrupted cutting with champfered tools Academic Article
-
Analysis of the robotic disc grinding process Academic Article
-
Annual Reviews in Control Journal
-
Anomalous influence of polarity in sink EDM of titanium alloys Academic Article
-
Anomaly detection methods for infrequent failures in resistive steel welding Academic Article
-
Application of Neural Networks and State-Space Averaging to DC/DC PWM Converters in Sliding-Mode Operation Academic Article
-
Application of Some Parameter Adaptive Control Algorithms in Machining Academic Article
-
Application of a transversal laguerre network in adaptive equalization Academic Article
-
Application of latent variable methods to process control and multivariate statistical process control in industry Academic Article
-
Application of some parameter adaptive control algorithms in machining Conference Paper
-
Application of ultra-thin fluorine-content lubricating films to reduce tool/workpiece adhesive interaction during thread-cutting operations Academic Article
-
Applications of acoustic mapping in electrical discharge machining Academic Article
-
Approach to decentralized marketing-production planning† Academic Article
-
Archiv f�r Mathematische Logik und Grundlagenforschung Journal
-
Asian Journal of Control Journal of Control Systems and Technology Journal
-
Assembly Automation Journal
-
Assessment of abrasion-assisted material removal in wire EDM Academic Article
-
Attaining optimized A-TIG welding parameters for carbon steels by advanced parameter-less optimization techniques: with experimental validation Academic Article
-
Automated Grasp Planning and Execution for Real-World Objects using Computer Vision and Tactile Probing Academic Article
-
Automated Gripper Jaw Design and Grasp Planning for Sets of 3D Objects Academic Article
-
Automated Monitoring of Manufacturing Processes, Part 1: Monitoring Methods Academic Article
-
Automated Monitoring of Manufacturing Processes, Part 2: Applications Academic Article
-
Automated broad transfer learning for cross-domain fault diagnosis Academic Article
-
Automated minimax system modeling† Academic Article
-
Automatic Synthesis of Robot Compliant Motions in Dynamic Environments Academic Article
-
Automatic Viewpoint Planning in Teleoperation of a Mobile Robot Academic Article
-
Automatic tuning of pneumatic servo actuators Academic Article
-
Automatic visual inspection system for quality control of the sandwich panel and detecting the dipping and buckling of the surfaces Academic Article
-
Automatica Journal
-
Autonomous Robots Journal
-
Balanced approximation can be optimal Academic Article
-
Balancing and scheduling mixed-model U-shaped production lines Academic Article
-
Bilateral Macro–Micro Teleoperation Using Magnetic Levitation Academic Article
-
Bilateral Magnetic Micromanipulation Using Off-Board Force Sensor Academic Article
-
Bilinear system identification by block pulse functions Academic Article
-
Block bialternate sum and associated stability formulae Academic Article
-
Breakout detection in fast hole electrical discharge machining Academic Article
-
Broadcasting with fidelity criteria Conference Paper
-
Bundling in a supply chain: insights and implications Academic Article
-
Burr height model for vibration assisted drilling of aluminum 6061-T6 Academic Article
-
Burr size reduction in drilling by ultrasonic assistance Conference Paper
-
CIRP Annals - Manufacturing Technology Journal
-
CONTROL STRATEGY FOR MULTIPASS ROBOTIC GRINDING Academic Article
-
Chaos and complexity in measles models: A comparative numerical study Academic Article
-
Characterization and prediction of chip formation dynamics in machining austenitic stainless steel through supply of a high-pressure coolant Academic Article
-
Chip formation during microscale cutting of a medium carbon steel Academic Article
-
Circuits, Systems, and Signal Processing Journal
-
Closed form formulation of cutting forces for ball and flat end mills Academic Article
-
Closed-Loop Feedback Control of Production Part Errors Conference Paper
-
Cloud-edge-device collaboration mechanisms of deep learning models for smart robots in mass personalization Academic Article
-
Compositional Nonblocking Verification Using Generalized Nonblocking Abstractions Academic Article
-
Compound Control Strategy Based on Active Disturbance Rejection for Selected Catalytic Reduction systems Academic Article
-
Computers and Industrial Engineering Journal
-
Computing reachable sets for uncertain nonlinear hybrid systems using interval constraint-propagation techniques Academic Article
-
Condition Monitoring of Machine Tool Feed Drives: A Review Academic Article
-
Conditions for minimax approximation obtained from the<tex>I_{p}</tex>norm Academic Article
-
Consistency of modified LS estimation method for identifying 2-D noncausal SAR model parameters Academic Article
-
Constrained control Lyapunov function based model predictive control design Academic Article
-
Constrained control Lyapunov function-based control of nonlinear systems Academic Article
-
Control Engineering Practice Journal
-
Control and Intelligent Systems Control and computers Journal
-
Control of Multiple Quad-Copters With a Cable-Suspended Payload Subject to Disturbances Academic Article
-
Control of a dual stage magnetostrictive actuator and linear motor feed drive system Academic Article
-
Control of diesel engine dual-loop EGR air-path systems by a singular perturbation method Academic Article
-
Control strategy and upper bound solution for non-flat tool open die forging automation Academic Article
-
Controllability minimum principle based construction of the null controllable region for nonlinear systems Academic Article
-
Cooperative Sensor-based Selective Graph Exploration Strategy for a Team of Quadrotors Academic Article
-
Correction to: Effect of torch angle and position on bead geometry and joint strength during arc brazing of thin‑gauge dual‑phase steel Academic Article
-
Corrigendum to “digital twins-based smart manufacturing system design in industry 4.0: A review’’ [J. Manuf. Syst. 60 (2021) 119–137] Academic Article
-
Cubature Kalman Filters Academic Article
-
Cubature Kalman smoothers Academic Article
-
Custom Grasping: A Region-Based Robotic Grasping Detection Method in Industrial Cyber-Physical Systems Academic Article
-
Cutting temperature of ceramic tools in high speed machining of difficult-to-cut materials Academic Article
-
DISOPT—A general programme for continuous and discrete non-linear programming problems† Academic Article
-
DPP: An agent-based approach for distributed process planning Conference Paper
-
Data-Based Modeling and Control of Nylon-6, 6 Batch Polymerization Conference Paper
-
Data-Based Modeling and Control of Nylon-6, 6 Batch Polymerization Academic Article
-
Data-driven fault tolerant predictive control for temperature regulation in data center with rack-based cooling architecture Academic Article
-
Deformation behavior of steel-to-aluminum tailor blanks made by laser/MIG hybrid and cold metal transfer brazing methods Academic Article
-
Derivation of Design Requirements for Optimization of a High Performance Hydrostatic Actuation System Academic Article
-
Design and Robustness Analysis of Discrete Observers for Diesel Engine In-Cylinder Oxygen Mass Fraction Cycle-by-Cycle Estimation Academic Article
-
Design and control of a dual-stage feed drive Academic Article
-
Design guideline for intermetallic compound mitigation in Al-Mg dissimilar welding through addition of interlayer Academic Article
-
Design of a compact statically balanced direct-drive manipulator Academic Article
-
Design of a new high-performance electrohydraulic actuator Conference Paper
-
Design optimization of a spatial six degree-of-freedom parallel manipulator based on artificial intelligence approaches Academic Article
-
Design, analysis, and stiffness optimization of a three degree of freedom parallel manipulator Academic Article
-
Designing plant experiments for real-time optimization systems Academic Article
-
Determination of pressure-dependent friction coefficient from draw-bend test and its application to cup drawing Academic Article
-
Development and Validation of Finite Element Structure-Tuned Liquid Damper System Models Academic Article
-
Development and experimental validation of a control-oriented Diesel engine model for fuel consumption and brake torque predictions Academic Article
-
Development of Proportional–Integral–Derivative and Fuzzy Control Strategies for Navigation in Agricultural Environments Academic Article
-
Development of a Hybrid Dynamic Model and Experimental Identification of Robotic Bulldozing Academic Article
-
Development of a Novel Modular and Agile Face Machining Technology Conference Paper
-
Development of a laboratory-scale Upset Protrusion Joining (UPJ) system for dissimilar materials Academic Article
-
Development of the TIARA Hexapod: A Machine Tool Based on Parallel Kinematic Structures Academic Article
-
Digital twins-based smart manufacturing system design in Industry 4.0: A review Academic Article
-
Digitalization and the Future of Employment: A Case Study on the Canadian Offshore Oil and Gas Drilling Occupations Academic Article
-
Direct manufacturing of diamond composite coatings onto silicon wafers and heat transfer performance Academic Article
-
Directional Input Adaptation in Parametric Optimal Control Problems Academic Article
-
Discrete Event Dynamic Systems: Theory and Applications Journal
-
Discrete-time Linear Quadratic Gaussian Control for Teleoperation Under Communication Time Delay Academic Article
-
Doppler shift based stable clustering scheme for mobile ad hoc networks Academic Article
-
Dual-Axial Motion Control of a Magnetic Levitation System Using Hall-Effect Sensors Academic Article
-
Dual-Sensor Based Robotic Deburring Academic Article
-
Dynamic Electrode Force and Displacement in Resistance Spot Welding of Aluminum Academic Article
-
Dynamic Systems and Control, Parts A and B Journal
-
Dynamic Systems and Control, Volumes 1 and 2 Journal
-
Dynamic feature modelling for closed-loop machining process control of complex parts Academic Article
-
Dynamic jamming in dense suspensions: Surface finishing and edge honing applications Academic Article
-
Dynamic programming on an electronic spreadsheet Academic Article
-
Dynamics of Continuous, Discrete and Impulsive Systems Series A: Mathematical Analysis Dynamics of Continuous, Discrete and Impulsive Systems Series B: Applications and Algorithms Journal
-
ENHANCEMENT OF PRODUCTIVITY BY INTELLIGENT PROGRAMMING OF FEED RATE IN 3-AXIS MILLING Conference Paper
-
Editorial of the special issue on agents meet robots Academic Article
-
Effect of Controller in Reducing Steady-State Error due to Flow and Force Disturbances in the Electrohydraulic Actuator System Academic Article
-
Effect of Forging Force on Fatigue Behavior of Spot Welded Joints of Aluminum Alloy 5182 Academic Article
-
Effect of Multiple Pulse Resistance Spot Welding Schedules on Liquid Metal Embrittlement Severity Academic Article
-
Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminum alloy Academic Article
-
Effect of cooling rate and laser process parameters on additive manufactured Fe–Ti–C metal matrix composites microstructure and carbide morphology Academic Article
-
Effect of dynamic recrystallization at tool-chip interface on accelerating tool wear during high-speed cutting of AISI1045 steel Academic Article
-
Effect of edge preparation technologies on cutting edge properties and tool performance Academic Article
-
Effect of electrode tip geometry on electrode degradation during resistance spot welding zinc coated sheet steel Academic Article
-
Effect of material microstructure and tool geometry on surface generation in single point diamond turning Academic Article
-
Effect of microstructure softening events on the chip morphology of AISI 1045 steel during high speed machining Academic Article
-
Effect of process parameters on chip formation during vibration-assisted drilling of Ti6Al4V Academic Article
-
Effect of tool quality on the machinability characteristics of Al-Cu and Al-Si cast alloys Academic Article
-
Effect of torch angle and position on bead geometry and joint strength during arc brazing of thin-gauge dual-phase steel Academic Article
-
Effects of Edge Preparation and Feed when Hard Turning a Hot Work Die Steel with Polycrystalline Cubic Boron Nitride Tools Conference Paper
-
Effects of process parameters on material side flow during hard turning Academic Article
-
Efficiency of rolling schedules for a class of stochastic control problems Academic Article
-
Electrical discharge milling with oblong tools Academic Article
-
Electro-erosion edge honing of cutting tools Conference Paper
-
Elimination of delamination and burr formation using high-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material Academic Article
-
Elite solutions and Tabu assisted variable neighbourhood descent for rescheduling problems in the steelmaking-refining-continuous casting process Academic Article
-
Energy-Aware Scheduling on Heterogeneous Processors Academic Article
-
Engine Cycle-by-Cycle Cylinder Wall Temperature Observer-Based Estimation Through Cylinder Pressure Signals Academic Article
-
Enhancing the performance of an agent-based manufacturing system through learning and forecasting Academic Article
-
Equitable last mile distribution in emergency response Academic Article
-
Equivalence preserving transformations for timed transition models Academic Article
-
Erratum to “Hierarchical Interface-Based Supervisory Control—Part I: Serial Case” Academic Article
-
Erratum to: Frictional and wear performance of hard coatings during machining of superduplex stainless steel Academic Article
-
Estimation of direction-of-arrivals based on the array manifold space Academic Article
-
Estimation of free flow speed and critical density in a segmented freeway using missing data and Monte Carlo-based expectation maximisation algorithm Academic Article
-
European Journal of Control Journal
-
European Journal of Industrial Engineering Journal
-
Evaluation of Electrode Degradation and Projection Weld Strength in the Joining of Steel Nuts to Galvanized Advanced High Strength Steel Academic Article
-
Evaluation of Tool Wear Suppressive Ability of Lubricants Usein in Minimum Quantity Lubrication Application in High Speed Machining of Cast Aluminum Alloys Conference Paper
-
Evaluation of cutting force and temperature when turning hardened die steel with AMBORITE AMB90 and DBC50 tooling Academic Article
-
Evaluation of the superabsorbent coolant as a new approach to semi-dry machining Academic Article
-
Experimental Comparison of Position Tracking Control Algorithms for Pneumatic Cylinder Actuators Academic Article
-
Experimental Comparisons of Sliding Mode Controlled Pneumatic Muscle and Cylinder Actuators Academic Article
-
Experimental Evaluation of Cutter Orientation When Ball Nose End Milling Inconel 718™ Academic Article
-
Experimental determination of the friction coefficient on the workpiece-fixture contact surface in workholding applications Academic Article
-
Experimental investigations into electrical discharge machining with a rotating disk electrode Academic Article
-
Exponential Stabilization for the Nonlinear Schrödinger Equation with Localized Damping Academic Article
-
Exponential stability of LPV systems with guaranteed convergence rate and L<SUB align=right>2 gain Academic Article
-
Extended Kalman Filter Based In-Cylinder Temperature Estimation for Diesel Engines With Thermocouple Lag Compensation Academic Article
-
Factorization and feedback stabilization for nonlinear systems Academic Article
-
Factorization and the Nehari theorem in time-varying systems Academic Article
-
Failure monitoring in a high performance hydrostatic actuation system using the extended Kalman filter Academic Article
-
Fast decimation-in-time algorithms for a family of discrete sine and cosine transforms Academic Article
-
Fast prime factor decomposition algorithms for a family of discrete trigonometric transforms Academic Article
-
Fatigue limit test of fusion-mouth material of extruded aluminum alloy profile Academic Article
-
Fault-tolerant control of nonlinear processes: performance-based reconfiguration and robustness Academic Article
-
Fault-tolerant supervisory control with permanent faults Academic Article
-
Finding an optimal dynamic advertising policy Academic Article
-
Finite element modeling of erosive wear Academic Article
-
Finite element modeling of low speed reaming vibrations with reamer geometry modifications Academic Article
-
Finite element simulation of cutting process under the worn tool edge geometries Academic Article
-
Fish Swarm Inspired Underwater Sensor Deployment Academic Article
-
Flexible manufacturing systems evaluation: An alternative approach Academic Article
-
Flexible platform component design under uncertainty Academic Article
-
Fluid Power Systems and Technology Journal
-
Force Control for Robotic Deburring Academic Article
-
Force prediction and stability analysis of plunge milling of systems with rigid and flexible workpiece Academic Article
-
Form error in diamond turning Academic Article
-
Forward kinematics, performance analysis, and multi-objective optimization of a bio-inspired parallel manipulator Academic Article
-
Fractal interpolation functions and data compression for tracking Academic Article
-
Framework of decision support system for quality-oriented production management Academic Article
-
Frictional and wear performance of hard coatings during machining of superduplex stainless steel Academic Article
-
From the basic mechanics of orthogonal metal cutting toward the identification of the constitutive equation Academic Article
-
Function-Block Enabled Job Shop Planning and Control With Uncertainty Conference Paper
-
Fuzzy Non Linear PI Controller for High Performance Conference Paper
-
Fuzzy fault tree reliability analysis based on improved T-S model with application to NC turret Academic Article
-
Fuzzy two-stage quadratic programming for planning solid waste management under uncertainty Academic Article
-
Game Theory Based Dynamic Event-Driven Service Scheduling in Cloud Manufacturing Academic Article
-
General geometric modelling approach for machining process simulation Academic Article
-
General programmes for least pth and near minimax approximation Academic Article
-
Generalized Derivatives for Hybrid Systems Academic Article
-
Generalized PI controllability Academic Article
-
Generalized derivatives of dynamic systems with a linear program embedded Academic Article
-
Generalized minimum variance adaptive control and parameter convergence for stochastic systems Academic Article
-
Generation of Milled Surfaces Including Tool Dynamics and Wear Academic Article
-
Generation of milled surfaces including tool dynamics and wear Academic Article
-
Generic Simulation Approach for Multi-Axis Machining, Part 1: Modeling Methodology Academic Article
-
Generic Simulation Approach for Multi-Axis Machining, Part 2: Model Calibration and Feed Rate Scheduling Academic Article
-
Generic Simulation Approach for Multi-Axis Machining: Part II—Model Calibration and Feed Rate Scheduling Academic Article
-
Generic Simulation Approach for Multi-Axis Machining: Part I—Modeling Methodology Academic Article
-
Geometric Simulation of Ball-End Milling Operations Academic Article
-
Geometric simulation of electro-erosion edge honing: Insights into process mechanisms Academic Article
-
Global vegetation change analysis based on MODIS data in recent twelve years Academic Article
-
Gradient minimax techniques for system modelling Academic Article
-
Grain Size and Orientation Effects When Microcutting AISI 1045 Steel Academic Article
-
Greenhouse gases emitted in manufacturing a product—A new economic model Academic Article
-
Grey linear programming, its solving approach, and its application Academic Article
-
Guaranteed parameter estimation of non-linear dynamic systems using high-order bounding techniques with domain and CPU-time reduction strategies Academic Article
-
Guaranteed-cost reliable control with regional pole placement of a power system Academic Article
-
Guest Editorial Special Section on 2019 IEEE International Conference on Automation Science and Engineering Academic Article
-
Guest Editorial Special Section on Advances and Applications of Internet of Things for Smart Automated Systems Academic Article
-
HIGH STRAIN RATE SHEAR EVALUATION AND CHARACTERIZATION OF AISI D2 TOOL STEEL IN ITS HARDENED STATE Academic Article
-
Helical milling: An enabling technology for hard machining precision holes in AISI D2 tool steel Academic Article
-
Hierarchical interface-based supervisory Control-part I: serial case Academic Article
-
Hierarchical interface-based supervisory control of a flexible manufacturing system Academic Article
-
Hierarchical interface-based supervisory control with data events Academic Article
-
Hierarchical interface-based supervisory control-part II: parallel case Academic Article
-
Hierarchical interface-based supervisory control: Command-pair interfaces Conference Paper
-
Hierarchical modelling of manufacturing systems using discrete event systems and the conflict preorder Academic Article
-
Hierarchical, Knowledge-Based Control in Turning Academic Article
-
High Precision Hydrostatic Actuation Systems for Micro- and Nanomanipulation of Heavy Loads Academic Article
-
High Speed Ball Nose End Milling of Inconel 718 Academic Article
-
High Speed Face Milling of a Aluminium Silicon Alloy Casting Academic Article
-
High Technology Letters Journal
-
High speed servo control of multi-axis machine tools Academic Article
-
High-Accuracy Position Control of a Rotary Pneumatic Actuator Academic Article
-
High-Speed Milling of Dies and Molds in Their Hardened State Conference Paper
-
High-coherence jets for focused fluid delivery in grinding Academic Article
-
High-power diode laser assisted hard turning of AISI D2 tool steel Academic Article
-
High-speed five-axis milling of hardened tool steel Academic Article
-
Hybrid data-driven physics-based model fusion framework for tool wear prediction Academic Article
-
Hybrid head mechanism of the groundhog-like mine rescue robot Academic Article
-
Hybrid predictive control of nonlinear systems: method and applications to chemical processes Academic Article
-
IEE Proceedings: Control Theory and Applications IET Control Theory and Applications Journal
-
IEEE Transactions on Automatic Control Journal
-
IEEE Transactions on Automation Science and Engineering IEEE Transactions on Robotics and Automation Journal
-
IEEE Transactions on Control Systems Technology Journal
-
IEEE Transactions on Robotics Journal
-
IEEE Transactions on Semiconductor Manufacturing Journal
-
IEEE/ASME Transactions on Mechatronics Journal
-
IMA Journal of Mathematical Control and Information IMA Journal of Mathemathics Applied in Medicine and Biology Journal
-
INVESTIGATION OF NANO-STRUCTURED PVD COATINGS FOR DRY HIGH-SPEED MACHINING Academic Article
-
ISA Transactions Journal
-
Identification for robust multivariable control Academic Article
-
Identification of acceleration deceleration profile of feed drive systems in CNC machines Academic Article
-
Identification of filter management strategy in fluid power systems under uncertainty: an interval-fuzzy parameter integer nonlinear programming method Academic Article
-
Implementing Inter-Enterprise Workflow Management Using Agent-Based Web Services Conference Paper
-
Implementing a hybrid simulation model for a Kanban-based material handling system Conference Paper
-
Improved prediction of cutting forces via finite element simulations using novel heavy-load, high-temperature tribometer friction data Academic Article
-
Improvement in robustness and computational efficiency of material models for finite element analysis of metal powder compaction and experimental validation Academic Article
-
In-process detection of surface porosity in machined castings Academic Article
-
In-process evaluation of workpiece geometrical tolerances in bar turning Academic Article
-
In-process monitoring and control of thickness error in machining hollow shafts Academic Article
-
In-process monitoring of tool wear in milling using cutting force signature Academic Article
-
Industrial Diamond Review Journal
-
Industrial big data-driven mechanical performance prediction for hot-rolling steel using lower upper bound estimation method Academic Article
-
Influence of friction models on FE simulation results of orthogonal cutting process Academic Article
-
Influence of process parameters on the cutting performance of SiAlON ceramic tools during high-speed dry face milling of hardened Inconel 718 Academic Article
-
Influence of scanning strategies on L-PBF processing of titanium aluminides Academic Article
-
Influence of thermal properties on residual stresses in SLM of aerospace alloys Academic Article
-
Inner-Loop Control for Electro-Hydraulic Actuation Systems Academic Article
-
Inner-Loop Control for Electromechanical (EMA) Flight Surface Actuation Systems Academic Article
-
Inner-Loop Feedback for Deadband Compensation in Electromechanical Flight Surface Actuation Systems Conference Paper
-
Input constrained non-equilibrium transient trajectory shaping via a three-stage control method for a class of non-linear systems Academic Article
-
Integrated digitizing, path planning, and five-axis machining for the refurbishment of compressor and turbine blades Academic Article
-
Integrated manufacturing process planning and control based on intelligent agents and multi-dimension features Academic Article
-
Integrated modeling for metal removal operations Conference Paper
-
Integrated on-line scheduling of order batching and delivery under B2C e-commerce Academic Article
-
Integrated optimization of storage location assignment and crane scheduling in an unmanned slab yard Academic Article
-
Integrated process control and automation Academic Article
-
Intelligent manufacturing system with human-cyber-physical fusion and collaboration for process fine control Academic Article
-
Interfacial microstructures and mechanical properties of dissimilar titanium alloy and steel friction stir butt-welds Academic Article
-
Interim feature-based cutting parameter optimization for aircraft structural parts Academic Article
-
International Journal of Adaptive Control and Signal Processing Journal
-
International Journal of Advanced Manufacturing Technology Robotersysteme Journal
-
International Journal of Advanced Robotic Systems Journal
-
International Journal of Computer Integrated Manufacturing Journal
-
International Journal of Control Journal
-
International Journal of Flexible Manufacturing Systems Flexible Services and Manufacturing Journal Journal
-
International Journal of Fluid Power Journal
-
International Journal of Humanoid Robotics Journal
-
International Journal of Machine Tools and Manufacture Journal
-
International Journal of Modelling, Identification and Control Journal
-
International Journal of Robotics Research Journal
-
International Journal of Robotics and Automation Journal
-
International Journal of Robust and Nonlinear Control Journal
-
International Journal of Systems Science Journal
-
Introduction to the Special Issue on Global and Robust Optimization of Dynamic Systems Academic Article
-
Introduction to the special issue on optimal process control Academic Article
-
Investigation of die polishing strategies using five-axis machining centre Conference Paper
-
Investigation of wear behavior and chip formation for cutting tools with nano-multilayered TiAlCrN/NbN PVD coating Academic Article
-
Isolation and handling of actuator faults in nonlinear systems Academic Article
-
Isolation and handling of sensor faults in nonlinear systems Academic Article
-
JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing JSME International Journal, Series C: Dynamics, Control, Robotics, Design and Menufacturing Journal
-
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS Journal
-
Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME Journal
-
Journal of Dynamical and Control Systems Dynamics and Control Journal
-
Journal of Intelligent Manufacturing Journal
-
Journal of Intelligent Manufacturing: Guest editorial Academic Article
-
Journal of Intelligent and Robotic Systems: Theory and Applications Journal
-
Journal of Manufacturing Processes Journal
-
Journal of Manufacturing Science and Engineering, Transactions of the ASME Journal
-
Journal of Manufacturing Systems Journal
-
Journal of Robotic Systems Journal of Field Robotics Journal
-
Journal of the Brazilian Society of Mechanical Sciences and Engineering Journal
-
Journal of the Franklin Institute Journal
-
Kinematic and geometric error compensation of a coordinate measuring machine Academic Article
-
Kinematic enveloping grasp planning method for robotic dexterous hands and three-dimensional objects Academic Article
-
Knowledge updating for automated tool condition monitoring in machining Conference Paper
-
Laser ablation as a processing technique for metallic and polymer layered structures Academic Article
-
Laser powder bed fusion of titanium aluminides using sequential thermal scanning strategy Academic Article
-
Lecture Notes in Control and Information Sciences Journal
-
Local optimization of dynamic programs with guaranteed satisfaction of path constraints Academic Article
-
Locating sensor nodes on construction projects Academic Article
-
Lot-splitting for inspection in a synchronised two-stage manufacturing process with finite production rates and random out-of-control shifts in the first stage Academic Article
-
Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material Academic Article
-
Lyapunov-based model predictive control of stochastic nonlinear systems Academic Article
-
METAL CUTTING THEORY AND PRACTICE Academic Article
-
MULTIVARIATE SELF-TUNING PROCESS-CONTROL Academic Article
-
Machinability of SLM-produced Ti6Al4V titanium alloy parts Academic Article
-
Machine Learning-Based Prognostics for Central Heating and Cooling Plant Equipment Health Monitoring Academic Article
-
Machined surface integrity of inconel 718 in high-speed dry milling using SiAlON ceramic tools Academic Article
-
Machining Science and Technology Journal
-
Manifestations of reduced tool-chip friction during turning of AISI 1045 steel with PVD-coated carbide inserts Academic Article
-
Manufacturing Journal
-
Manufacturing Engineer Journal
-
Manufacturing Engineering Journal
-
Manufacturing Engineering and Materials Handling Engineering Journal
-
Manufacturing Engineering and Materials Handling, Parts A and B Journal
-
Manufacturing Science and Engineering Journal
-
Mathematical and Computer Modelling of Dynamical Systems Journal
-
Mathematics of Control, Signals, and Systems Journal
-
Measurement and Control Journal
-
Mechanism of material removal in electrical discharge diamond grinding Academic Article
-
Mechanistic Modeling of Ball End Milling Including Tool Wear Academic Article
-
Mechatronics Journal
-
MetaMorph II: an agent-based architecture for distributed intelligent design and manufacturing Academic Article
-
Micro-Precision Hydrostatic Actuation System Conference Paper
-
Micro-texturing channel surfaces on glass with spark assisted chemical engraving Academic Article
-
Milling Process Simulation—A Generic Solid Modeller Based Paradigm Academic Article
-
Milling parameters of Al-Cu and Al-Si cast alloys Academic Article
-
Minimal overshoot V-F control for islanded microgrids Academic Article
-
Minimal overshoot V-F control for islanded microgrids Academic Article
-
Minimizing the surface roughness in L-PBF additive manufacturing process using a combined feedforward plus feedback control system Academic Article
-
Minimum Time Trajectory Planning Along Specified Tool Path With Consideration of Cutting Force Constraint and Feed Drive Dynamics Conference Paper
-
Mobile Robot Collision Avoidance in Human Environments Academic Article
-
Mobile Robot Navigation for Moving Obstacles with Unpredictable Direction Changes, Including Humans Academic Article
-
Model Predictive Control for Transparent Teleoperation Under Communication Time Delay Academic Article
-
Model Predictive Quality Control of Polymethyl Methacrylate Academic Article
-
Model-Based Control of Three Degrees of Freedom Robotic Bulldozing Academic Article
-
Model-Based Motion Control of a Robotic Manipulator With a Flying Multirotor Base Academic Article
-
Model-Based Predictive Control of Workpiece Accuracy in Bar Turning Academic Article
-
Model-based Decentralized Control of Time-delay Teleoperation Systems Academic Article
-
Model-based controller design for machine tool direct feed drives Academic Article
-
Modeling and Analysis of Fuel Injection Split for Diesel Engine Active Fueling Control Academic Article
-
Modeling and control of cooperative teleoperation systems Academic Article
-
Modeling the effect of the microstructure of compacted graphite iron on chip formation Academic Article
-
Modeling the effects of microstructure in metal cutting Academic Article
-
Modelling Machining Dynamics Including Damping in the Tool-Workpiece Interface Academic Article
-
Modelling geometric and thermal errors in a five-axis cnc machine tool Academic Article
-
Modelling of Abrasive Waterjet Machining: A New Approach Academic Article
-
Modelling of temperature and forces when orthogonally machining hardened steel Academic Article
-
Modelling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316L Academic Article
-
Motion control for linear motor feed drives in advanced machine tools Academic Article
-
Multi-objective optimization of forming parameters for tube hydroforming process based on the Taguchi method Academic Article
-
Multi-product multi-market model for co-ordination of marketing and production decisions Academic Article
-
Multi-vehicle tracking with microscopic traffic flow model-based particle filtering Academic Article
-
Multisensor-based detection of contact state for automated sheet metal assembly Conference Paper
-
Negotiation in Agent Based Manufacturing Scheduling Using Auction Models Conference Paper
-
Neighbouring-extremal control for singular dynamic optimisation problems. Part I: single-input systems Academic Article
-
Neighbouring-extremal control for singular dynamic optimisation problems. Part II: multiple-input systems Academic Article
-
Non-linear minimax optimization as a sequence of leastpth optimization with finite values ofp Academic Article
-
Non-linear programming using least pth optimization with extrapolation† Academic Article
-
Nonlinear Analysis: Hybrid Systems Journal
-
Nonlinear Estimation Techniques Applied on Target Tracking Problems Academic Article
-
Nonlinear Modeling and Control of Servo Pneumatic Actuators Academic Article
-
Nonlinear and Filtered Force/Position Mappings in Bilateral Teleoperation With Application to Enhanced Stiffness Discrimination Academic Article
-
Nonlinear convex and concave relaxations for the solutions of parametric ODEs Academic Article
-
Normalizing variables with too-frequent values using a Kolmogorov–Smirnov test: A practical approach Academic Article
-
Novel Kinematics for Cylindrical Grinding of Brittle Materials Academic Article
-
Novel Model-Based Estimators for the Purposes of Fault Detection and Diagnosis Academic Article
-
Novel application of ultra-soft and lubricious materials for cutting tool protection and enhancement of machining induced surface integrity of Inconel 718 Academic Article
-
Novel methods for rapid assessment of tool performance in milling Academic Article
-
Numerical modelling and experimental validation of the effect of laser beam defocusing on process optimization during fiber laser welding of automotive press-hardened steels Academic Article
-
Observation of a unique wear morphology of cBN inserts during machining of titanium metal matrix composites (Ti-MMCs); leading to new insights into their machinability Academic Article
-
Off line simulation system of machining processes Academic Article
-
On Constructing Constrained Control Lyapunov Functions for Linear Systems Academic Article
-
On line inspection and control of workpiece dimension using ultrasonic sensors Conference Paper
-
On performance enhancement of parallel kinematic machine Academic Article
-
On stress propagation and fracture in compacted graphite iron Academic Article
-
On the application of tuning regulators to control a commercial heat exchanger Academic Article
-
On the characterization of stainless steel 316L parts produced by selective laser melting Academic Article
-
On the detection of a signal in colored noise Academic Article
-
On the dynamics of ball end milling: modeling of cutting forces and stability analysis Academic Article
-
On the surface quality of additive manufactured parts Academic Article
-
On-Line Production Control of Tandem Systems with Finite Inter-Stage Storage, Using a Dynamic Maximum Cycle Time Algorithm Academic Article
-
On-line melt pool temperature control in L-PBF additive manufacturing Academic Article
-
One-step optimal saturation correction Academic Article
-
Optimal Control Applications and Methods Journal
-
Optimal Supervisory Control of Probabilistic Discrete Event Systems Academic Article
-
Optimal blanking die design for arbitrary blanks Academic Article
-
Optimal control analysis of a simple criminal prosecution model Academic Article
-
Optimal control of a revenue management system with dynamic pricing facing linear demand Academic Article
-
Optimal control of an imperfect repetitive synchronised production environment Academic Article
-
Optimal dynamic service rate control in time dependent M/M/S/N queues Academic Article
-
Optimal forest fire control with limited reinforcements Academic Article
-
Optimal lot size for a perishable good under conditions of finite production and partial backordering and lost sale Academic Article
-
Optimal nesting of irregular convex blanks in strips via an exact algorithm Academic Article
-
Optimal operation of alternating activated sludge processes Academic Article
-
Optimal planning of an adaptively controlled robotic disk grinding process Academic Article
-
Optimal production and maintenance decisions when a system experience age-dependent deterioration Academic Article
-
Optimal start-up of microfabricated power generation processes employing fuel cells Academic Article
-
Optimization and Numerical Flow Analysis of a Valveless Micropump Academic Article
-
Optimization and finite-frequency H ∞ control of active suspensions in in-wheel motor driven electric ground vehicles Academic Article
-
Optimization of cutting parameters in micro end milling operations in dry cutting condition using genetic algorithms Academic Article
-
Optimized feed scheduling in three axes machining Academic Article
-
Optimized feed scheduling in three axes machining. Part I: Fundamentals of the optimized feed scheduling strategy Academic Article
-
Optimum power distribution for cellular CDMA downlinks Academic Article
-
Optimum system modelling using recent gradient methods Academic Article
-
Option applications for retailers in a decentralized inventory system Academic Article
-
Order Statistical Filtering: a Robust Method of Noise Estimation Academic Article
-
Output feedback control of switched nonlinear systems using multiple Lyapunov functions Academic Article
-
Output transient trajectory shaping control for a class of nonlinear systems Academic Article
-
Output-Feedback Lyapunov-Based Predictive Control of Stochastic Nonlinear Systems Academic Article
-
PC based open architecture machine tool control Academic Article
-
PHENOMENOLOGICAL ANALYSIS OF MATERIAL SIDE FLOW IN HARD TURNING: CAUSES, MODELING, AND ELIMINATION Academic Article
-
PHYSICAL ROBOT AGENTS: COORDINATED INTELLIGENT AND RATIONAL AGENTS FOR COLLABORATIVE ROBOTS Conference Paper
-
Parameter Estimation Using a Combined Variable Structure and Kalman Filtering Approach Academic Article
-
Parameter Estimation in a Hydrostatic System Using Extended Kalman Filter Conference Paper
-
Parameter Identification for a High Performance Hydrostatic Actuation System Using the Variable Structure Filter Concept Conference Paper
-
Parameter Identification for a High-Performance Hydrostatic Actuation System Using the Variable Structure Filter Concept Academic Article
-
Parameter adaptive control in peripheral milling Academic Article
-
Parametric characterization of the geometry of honed cutting edges Academic Article
-
Parametric modelling and control of the robotic grinding process Academic Article
-
Passivity-Based Control of Multiple Quadrotors Carrying a Cable-Suspended Payload Academic Article
-
Performance analysis and optimization of a five-degrees-of-freedom compliant hybrid parallel micromanipulator Academic Article
-
Performance assessment of multivariable feedback controllers Academic Article
-
Performance of Whisker-Reinforced Ceramic Tools in Milling Nickel-Based Superalloy Academic Article
-
Performance of electrical discharge textured cutting tools Academic Article
-
Performance optimization of low-temperature geothermal organic Rankine cycles using axial turbine isentropic efficiency correlation Academic Article
-
Permutation flowshop scheduling with time lag constraints and makespan criterion Academic Article
-
Perturbation analysis and condition numbers of symmetric algebraic Riccati equations Academic Article
-
Physics-based simulation of high speed machining Conference Paper
-
Pneumatic non-contact roughness assessment of moving surfaces Academic Article
-
Pneumatic non-contact topography characterization of finish-ground surfaces using multivariate projection methods Academic Article
-
Point grinding of nickel-based superalloys Academic Article
-
Point grinding of nickel-based superalloys Academic Article
-
Port-Hamiltonian based control of water distribution networks Academic Article
-
Position Tracking Control of a Miniature Water Hydraulic Rotary Actuator Academic Article
-
Position control of an induction machine using variable structure control Academic Article
-
Position control of hybrid pneumatic–electric actuators using discrete-valued model-predictive control Academic Article
-
Power network sensitivity analysis and formulation simplified Academic Article
-
Precision Engineering Journal
-
Predicting the effect of vibration on ultraprecision machining surface finish as described by surface finish lobes Academic Article
-
Prediction of cutting forces in the micro-machining of silicon using a “hybrid molecular dynamic-finite element analysis” force model Academic Article
-
Prediction of tool failure rate in turning hardened steels Academic Article
-
Predictive control of parabolic PDEs with state and control constraints Academic Article
-
Predictive control of switched nonlinear systems with scheduled mode transitions Academic Article
-
Predictive stochastic feedforward-feedback control of a heat exchanger-stirred tank system Academic Article
-
Pressure-based transient intake manifold temperature reconstruction in Diesel engines Academic Article
-
Probabilistic Supervisory Control of Probabilistic Discrete Event Systems Academic Article
-
Probabilistic observers for a class of uncertain biological processes Academic Article
-
ROBUST NONLINEAR CONTROL AND ESTIMATION OF A PRRR ROBOT SYSTEM Academic Article
-
ROLE OF MICROSTRUCTURAL SOFTENING EVENTS IN METAL CUTTING Conference Paper
-
Rapid Prototyping Journal Journal
-
Real-Time Process Characterization of Open Die Forging for Adaptive Control Academic Article
-
Real-time evaluation of gap flushing in electrical discharge machining Academic Article
-
Reliability analysis for dependent stress-strength reliability of multi-state system using improved generalized survival signature Academic Article
-
Reliable state of charge and state of health estimation using the smooth variable structure filter Academic Article
-
Resistance is not futile: The use of projections for resistance joining of metal additively and conventionally manufactured parts Academic Article
-
Resistance spot welding of NiTi shape memory alloy sheets: Microstructural evolution and mechanical properties Academic Article
-
Robotic force control for deburring using an active end effector Academic Article
-
Robotica Journal
-
Robotics and Autonomous Systems Journal
-
Robotics and Computer-Integrated Manufacturing Journal
-
Robust MPC via min–max differential inequalities Academic Article
-
Robust Nonlinear Disturbance Observer Design for Estimation of Ammonia Storage Ratio in Selective Catalytic Reduction Systems Academic Article
-
Robust Nonlinear Model Predictive Control With Model Predictive Sliding Mode for Continuous-Time Systems Academic Article
-
Robust fault diagnosis of an electro-hydrostatic actuator using the novel dynamic second-order SVSF and IMM strategy Academic Article
-
Robust guaranteed-cost sliding control for brushless DC motors by LMI Academic Article
-
Robust hybrid predictive control of nonlinear systems Academic Article
-
Robust lateral motion control of four-wheel independently actuated electric vehicles with tire force saturation consideration Academic Article
-
Robust nonblocking supervisory control of discrete-event systems Academic Article
-
Robust path-following control for a fully actuated marine surface vessel with composite nonlinear feedback Academic Article
-
Robust predictive control of switched systems: Satisfying uncertain schedules subject to state and control constraints Academic Article
-
Robust switched current control of converters Academic Article
-
Role of spot weld electrode geometry on liquid metal embrittlement crack development Academic Article
-
Rotating Curvilinear Tools for EDM of Polygonal Shapes with Sharp Corners Academic Article
-
SIAM Journal on Control and Optimization SIAM J Control Journal
-
Sampled-data controller implementation Academic Article
-
Sampled-data supervisory control Academic Article
-
Scheduling multi-operation jobs in partially overlapping systems Academic Article
-
Section focused on new horizons in telerobotics for real-life applications Academic Article
-
Selective laser melting of porosity graded lattice structures for bone implants Academic Article
-
Simulation of diamond-ground surfaces Academic Article
-
Simulation of respirometry-based detection and mitigation of activated sludge toxicity Academic Article
-
Single facility location problem with region-dependent distance metrics Academic Article
-
Sink electrical discharge machining of hydrophobic surfaces Academic Article
-
Sliding Mode Control of a Hydraulic Industrial Robot Academic Article
-
Sliding Mode Controller and Filter Applied to a Model oft an Electrohydraulic Actuator System Conference Paper
-
Sliding Mode Controller and Filter Applied to an Electrohydraulic Actuator System Academic Article
-
Sliding Mode Controller and filter applied to a model of an Electrohydraulic Actuator System Conference Paper
-
Sliding mode control of a pneumatic muscle actuator system with a PWM strategy Academic Article
-
Smart agriculture: Development of a skid-steer autonomous robot with advanced model predictive controllers Academic Article
-
Solving dynamic optimization problems on a personal computer using an electronic spreadsheet Academic Article
-
Some observations on flood and dry finish turning of the Ti-6Al-4V aerospace alloy with carbide and PCD tools Academic Article
-
Special Issue on Collaborative Manufacturing and Supply Chains Academic Article
-
Special Issue on the 2020 International Conference on Automation Science and Engineering Academic Article
-
Special Issue on “Recent Developments on Modeling and Control of Hybrid Electric Vehicles” Academic Article
-
Special issue on multi-agent and holonic systems in manufacturing Academic Article
-
Spread-spectrum signals and the chaotic logistic map Academic Article
-
Stability and Performance Analysis of Centralized and Distributed Multi-rate Control Architectures for Multi-user Haptic Interaction Academic Article
-
Stability of acyclic multiclass queueing networks Academic Article
-
Stabilization of nonlinear systems with state and control constraints using Lyapunov-based predictive control Academic Article
-
Stamping Die Strip Optimization for Paired Parts Academic Article
-
Stamping blank optimal layout and coil slitting widths for single and dual blanks Academic Article
-
Stamping strip layout for optimal raw material utilization Academic Article
-
Statistical process control of multivariate processes Conference Paper
-
Stochastic control of a pension fund model with first-order Markov-dependent parameters Academic Article
-
Stochastic decision tree analysis on an electronic spreadsheet Academic Article
-
Stochastic quantile-filling augmentation algorithm to censored and accurate reliability data Academic Article
-
Stochastic simulation approach to modelling diamond wheel topography Academic Article
-
Structure Dictionary Learning-Based Multimode Process Monitoring and its Application to Aluminum Electrolysis Process Academic Article
-
Structuring of Contourlet Transform for Pipeline-Based Implementation Academic Article
-
Subband entropy-based features for clothing invariant human gait recognition Academic Article
-
Suboptimal adaptive control of a class of non-linear systems† Academic Article
-
Surface Generation with Engineered Diamond Grinding Wheels: Insights from Simulation Academic Article
-
Surface Integrity of Die Material in High Speed Hard Machining, Part 1: Micrographical Analysis Academic Article
-
Surface Integrity of Die Material in High Speed Hard Machining, Part 2: Microhardness Variations and Residual Stresses Academic Article
-
Surface and microstructure characterization of low-frequency vibration-assisted drilling of Ti6Al4V Academic Article
-
Surface defects during microcutting Academic Article
-
Surface finish in robotic disk grinding Academic Article
-
Surface topography characterization in finish milling Academic Article
-
Survival life analysis applied to tool life estimation with variable cutting conditions when machining titanium metal matrix composites (Ti-MMCs) Academic Article
-
Switching behavior of solutions of ordinary differential equations with abs-factorable right-hand sides Academic Article
-
Symbolic Verification of Hybrid Systems: An Algebraic Approach Academic Article
-
Synthesis Method for Hierarchical Interface-Based Supervisory Control Academic Article
-
Synthesis of Hybrid Impedance Control Strategies for Robot Manipulators Academic Article
-
Systems and Control Letters Journal
-
THE SMOOTH SLIDING MODE CONTROLLER AND FILTER Academic Article
-
Technical Paper - Society of Manufacturing Engineers. MF Journal
-
Techniques for Uniting Lyapunov-Based and Model Predictive Control Conference Paper
-
Temperature evaluation when machining hardened hot work die steel using PCBN tooling Academic Article
-
The Effect of Microstructure on Chip Formation and Surface Defects in Microscale, Mesoscale, and Macroscale Cutting of Steel Conference Paper
-
The Effect of Workpiece Hardness and Cutting Speed on the Machinability of AISI H13 Hot Work Die Steel When Using PCBN Tooling Academic Article
-
The Effect of Workpiece Hardness and Cutting Speed on the Machinability of AISI H13 Hot Work Die Steel When Using PCBN Tooling Academic Article
-
The Extended Variable Structure Filter Academic Article
-
The Variable Structure Filter Academic Article
-
The complex adjoint approaches to network sensitivities Academic Article
-
The decimation-in-frequency algorithms for a family of discrete sine and cosine transforms Academic Article
-
The effect of laser impingement angle on the optimization of melt pool geometry to improve process stability during high-speed laser welding of thin-gauge automotive steels Academic Article
-
The effect of scan path on thermal gradient during selective laser melting Academic Article
-
The effect of silicon content on liquid-metal-embrittlement susceptibility in resistance spot welding of galvanized dual-phase steel Academic Article
-
The failure mechanism of resistance spot welded third-generation medium-Mn steel during shear-tension loading Academic Article
-
The influence of cutter orientation and workpiece angle on machinability when high-speed milling Inconel 718 under finishing conditions Academic Article
-
The possibility of performing FEA analysis of a contact loading process fed by the MD simulation data Academic Article
-
The role of heating and cooling in viscous sintering of pairs of spheres and pairs of cylinders Academic Article
-
The selection of process parameters in additive manufacturing for aerospace alloys Academic Article
-
Thrust force model for vibration-assisted drilling of aluminum 6061-T6 Academic Article
-
TiB reinforced Ti-6Al-4V matrix composites with improved short-term creep performance fabricated by laser powder bed fusion Academic Article
-
Titanium aluminides processing by additive manufacturing – a review Academic Article
-
Tool Condition Monitoring in Machining by Fuzzy Neural Networks Academic Article
-
Tool Performance in High Speed Finish Milling of Ti6Al4V Conference Paper
-
Tool condition monitoring in drilling using vibration signature analysis Academic Article
-
Tool condition monitoring in machining by fuzzy neural networks Conference Paper
-
Tool condition monitoring in turning using fuzzy set theory Academic Article
-
Tool edge honing using shear jamming abrasive media Academic Article
-
Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions Academic Article
-
Topology optimization for infill in MEx Academic Article
-
Towards IoT-enabled dynamic service optimal selection in multiple manufacturing clouds Academic Article
-
Towards rigorous robust optimal control via generalized high-order moment expansion Academic Article
-
Transactions of the Institute of Measurement and Control Journal
-
Transmission-line modeling and sensitivity evaluation for lumped network simulation and design in the time domain Academic Article
-
Trapped Unburned Fuel Estimation and Robustness Analysis for a Turbocharged Diesel Engine With Negative Valve Overlap Strategy Academic Article
-
Tribological Aspects of Workpiece/Fixture Contact in Machining Processes Conference Paper
-
Tribological behavior of differently deposited Al-Si layer in the improvement of Inconel 718 machinability Academic Article
-
Tribological behavior of superduplex stainless steel against PVD hard coatings on cemented carbide Academic Article
-
Trilateral teleoperation control of kinematically redundant robotic manipulators Academic Article
-
Two-level algorithm for decentralized control of a serially connected dynamic system † Academic Article
-
Unexpected properties and optimum-distributed sensor detectors for dependent observation cases Academic Article
-
Unilateral Fixtures for Sheet-Metal Parts With Holes Academic Article
-
Uniting bounded control and MPC for stabilization of constrained linear systems Academic Article
-
Untitled Academic Article
-
Upset Protrusion Joining (UPJ) characteristics of cast AM60 magnesium alloy to join with dissimilar material Academic Article
-
Use of acoustic emission and cutting force signals to monitor built-up edge formation in stainless steel turning Academic Article
-
Vibration damping capability of electrical discharge machined surfaces: Characteristics, mechanism and application Academic Article
-
Viscous Damping Coefficient and Effective Bulk Modulus Estimation in a High Performance Hydrostatic Actuation System using Extended Kalman Filter Academic Article
-
Vision-guided fixtureless assembly of automotive components Conference Paper
-
What is a Hole? Discovering Access Holes in Disaster Rubble with Functional and Photometric Attributes Academic Article
-
Workpiece burn and surface finish during controlled force robotic disk grinding Academic Article
-
Zhongguo Jixie Gongcheng/China Mechanical Engineering Journal
-
Zidonghua Xuebao/Acta Automatica Sinica Journal