A three-dimensional analytical cutting force model for micro end milling operation

In the present day manufacturing arena one of the most important fields of interest lies in the manufacturing of miniaturized components. End milling with fine-grained carbide micro end mills could be an efficient and economical means for medium and small lot production of micro components. Analysis of the cutting force in micro end milling plays a vital role in characterizing the cutting process, in estimating the tool life and in optimizing the process. A new approach to analytical three-dimensional cutting force modeling has been introduced in this paper. The model determines the theoretical chip area at any specific angular position of the tool cutting edge by considering the geometry of the path of the cutting edge and relates this with tangential cutting force. A greater proportion of the helix face of the cutter participating in the cutting process differs the cutting force profile in micro end milling operations a bit from that in conventional end milling operations. This is because of the reason that the depth-of-cut to tool diameter ratio is much higher in micro end milling than the conventional one. The analytical cutting force expressions developed in this model have been simulated for a set of cutting conditions and are found to be well in harmony with experimental results.