publication venue for
- High-deposition laser brazing with enhanced surface quality, bridge performance and mechanical properties. 124:38-51. 2024
- The migration of jet materials along the collision interface with laser impact welding. 122:1-6. 2024
- Improving the corrosion resistance of Inconel 52M laser-cladded steel. 106:506-519. 2023
- A review on heat affected zone softening of dual-phase steels during laser welding. 102:663-684. 2023
- An analysis of different cutting strategies to improve tool life when machining Ti-5Al-5V-5Mo-3Cr alloy. 102:50-66. 2023
- Stress characterization for friction-stir-welded electric vehicle battery trays with application of neutron diffraction. 101:1109-1123. 2023
- Assessment of the tribological and wear performance of new duplex AlTiN-based coating systems at high temperatures when threading super duplex stainless steel. 98:285-301. 2023
- The achievement of lap weld and gap control for laser impact welding with water as the confinement layer. 95:105-114. 2023
- Influence of scanning strategies on L-PBF processing of titanium aluminides. 86:187-207. 2023
- Laser powder bed fusion of titanium aluminides using sequential thermal scanning strategy. 83:438-457. 2022
- Resistance spot welding of NiTi shape memory alloy sheets: Microstructural evolution and mechanical properties. 81:467-475. 2022
- The failure mechanism of resistance spot welded third-generation medium-Mn steel during shear-tension loading. 79:520-531. 2022
- The effect of laser impingement angle on the optimization of melt pool geometry to improve process stability during high-speed laser welding of thin-gauge automotive steels. 78:242-253. 2022
- An in-depth investigation of the machining performance of Ti1-Xalxn PVD coatings during high-speed machining of 316 stainless steel. 75:903-918. 2022
- Anomaly detection methods for infrequent failures in resistive steel welding. 75:497-513. 2022
- TiB reinforced Ti-6Al-4V matrix composites with improved short-term creep performance fabricated by laser powder bed fusion. 70:593-607. 2021
- Numerical modelling and experimental validation of the effect of laser beam defocusing on process optimization during fiber laser welding of automotive press-hardened steels. 67:535-544. 2021
- Resistance is not futile: The use of projections for resistance joining of metal additively and conventionally manufactured parts. 66:424-434. 2021
- Machinability of SLM-produced Ti6Al4V titanium alloy parts. 57:768-786. 2020
- Novel application of ultra-soft and lubricious materials for cutting tool protection and enhancement of machining induced surface integrity of Inconel 718. 57:431-443. 2020
- The effect of silicon content on liquid-metal-embrittlement susceptibility in resistance spot welding of galvanized dual-phase steel. 57:370-379. 2020
- A study of the relationship between thermal expansion and residual stresses in selective laser melting of Ti-6Al-4V. 52:181-192. 2020
- Effects of heat treatment on microstructure, mechanical and corrosion properties of 15-5 PH stainless steel parts built by selective laser melting process. 50:279-294. 2020
- Role of spot weld electrode geometry on liquid metal embrittlement crack development. 49:1-9. 2020
- Interfacial microstructures and mechanical properties of dissimilar titanium alloy and steel friction stir butt-welds. 40:160-168. 2019
- Effect of cooling rate and laser process parameters on additive manufactured Fe–Ti–C metal matrix composites microstructure and carbide morphology. 16:511-517. 2014
- Mechanistic Modeling of Ball End Milling Including Tool Wear. 8:21-28. 2006
- Experimental Evaluation of Cutter Orientation When Ball Nose End Milling Inconel 718™. 2:108-115. 2000