publication venue for
- Wear and micromechanical performance of novel mono/bi-layered PVD-coated WC tools in high-speed turning of Ti-5Al-5V-5Mo-3Cr alloy. 133:4939-4955. 2024
- Comprehensive health assessment of faulty and repaired linear axis components through multi-sensor monitoring. 132:5487-5501. 2024
- A review on machining Ti–5Al–5V–5Mo–3Cr alloy using defined geometry tools. 131:3373-3400. 2024
- An integrated framework for a multi-material surface roughness prediction model in CNC turning using theoretical and machine learning methods. 131:3579-3598. 2024
-
In-situ laser removal of Cu
2 O and CuO during laser powder bed fusion of copper parts. 1-19. 2024 - Leveraging metaheuristic algorithms with improved hybrid prediction model framework for enhancing surface roughness optimization in CNC turning AISI 316. 1-29. 2024
- Experimental and predictive analysis of the molding behavior of a PA6 glass mat thermoplastic (GMT). 129:1159-1173. 2023
- Enhancement of heat exchanger performance using additive manufacturing of gyroid lattice structures. 126:4021-4036. 2023
- Fuzzy fault tree reliability analysis based on improved T-S model with application to NC turret. 124:3837-3846. 2023
- Correction to: Effect of torch angle and position on bead geometry and joint strength during arc brazing of thin‑gauge dual‑phase steel. 121:5635-5635. 2022
- Minimizing the surface roughness in L-PBF additive manufacturing process using a combined feedforward plus feedback control system. 121:7811-7831. 2022
- Effect of torch angle and position on bead geometry and joint strength during arc brazing of thin-gauge dual-phase steel. 121:543-557. 2022
- Evolution of residual stress through the processing stages in manufacturing of bore-chilled sand-cast aluminum engine blocks with pressed-in iron liners. 120:4693-4705. 2022
- Upset Protrusion Joining (UPJ) characteristics of cast AM60 magnesium alloy to join with dissimilar material. 120:329-348. 2022
- A novel post-processing approach towards improving hole accuracy and surface integrity in laser powder bed fusion of IN625. 119:6225-6234. 2022
- Titanium aluminides processing by additive manufacturing – a review. 119:5583-5614. 2022
- A novel intelligent manufacturing mode with human-cyber-physical collaboration and fusion in the non-ferrous metal industry. 119:549-569. 2022
- Finite element simulation of cutting process under the worn tool edge geometries. 116:3991-4006. 2021
- Laser surface texturing and characterization of austenitic stainless steel for the improvement of its surface properties. 115:1795-1808. 2021
- Development of a laboratory-scale Upset Protrusion Joining (UPJ) system for dissimilar materials. 113:2725-2738. 2021
- Machined surface integrity of inconel 718 in high-speed dry milling using SiAlON ceramic tools. 112:1941-1950. 2021
- On-line melt pool temperature control in L-PBF additive manufacturing. 112:2789-2804. 2021
- A smart tool wear prediction model in drilling of woven composites. 110:2881-2892. 2020
- Deformation behavior of steel-to-aluminum tailor blanks made by laser/MIG hybrid and cold metal transfer brazing methods. 110:3061-3076. 2020
- The effect of scan path on thermal gradient during selective laser melting. 110:1261-1274. 2020
- A strategy to improve tool life by controlling cohesive failure in thick TiAlN coating during turning of CGI. 106:2793-2803. 2020
- Effect of edge preparation technologies on cutting edge properties and tool performance. 106:1823-1838. 2020
- Effect of process parameters on chip formation during vibration-assisted drilling of Ti6Al4V. 106:1105-1119. 2020
- Elimination of delamination and burr formation using high-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material. 105:859-873. 2019
- Influence of process parameters on the cutting performance of SiAlON ceramic tools during high-speed dry face milling of hardened Inconel 718. 105:1083-1098. 2019
- Tribological behavior of differently deposited Al-Si layer in the improvement of Inconel 718 machinability. 105:1245-1258. 2019
- An experimental investigation of surface integrity in selective laser melting of Inconel 625. 104:3511-3529. 2019
- Use of acoustic emission and cutting force signals to monitor built-up edge formation in stainless steel turning. 103:2257-2276. 2019
- Surface and microstructure characterization of low-frequency vibration-assisted drilling of Ti6Al4V. 103:1443-1457. 2019
- Characterization and prediction of chip formation dynamics in machining austenitic stainless steel through supply of a high-pressure coolant. 102:1671-1688. 2019
- Evaluation of the superabsorbent coolant as a new approach to semi-dry machining. 101:2037-2050. 2019
- Hybrid data-driven physics-based model fusion framework for tool wear prediction. 101:2861-2872. 2019
- Selective laser melting of porosity graded lattice structures for bone implants. 100:2915-2927. 2019
- An investigation of the effect of a new tool treatment technique on the machinability of Inconel 718 during the turning process. 100:37-54. 2019
- Some observations on flood and dry finish turning of the Ti-6Al-4V aerospace alloy with carbide and PCD tools. 99:2939-2957. 2018
- A thermal model for hard precision turning. 98:2401-2413. 2018
- Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material. 98:2801-2817. 2018
- A hybrid experimental and simulation approach to evaluate the calibration of tool wear rate models in machining. 96:2709-2724. 2018
- On the characterization of stainless steel 316L parts produced by selective laser melting. 95:1953-1974. 2018
- Design guideline for intermetallic compound mitigation in Al-Mg dissimilar welding through addition of interlayer. 94:2667-2678. 2018
- Erratum to: Frictional and wear performance of hard coatings during machining of superduplex stainless steel. 92:433-433. 2017
- Frictional and wear performance of hard coatings during machining of superduplex stainless steel. 92:423-432. 2017
- Observation of a unique wear morphology of cBN inserts during machining of titanium metal matrix composites (Ti-MMCs); leading to new insights into their machinability. 92:519-530. 2017
- The selection of process parameters in additive manufacturing for aerospace alloys. 92:2081-2098. 2017
- Manifestations of reduced tool-chip friction during turning of AISI 1045 steel with PVD-coated carbide inserts. 91:687-698. 2017
- An investigation into the behavior of the cutting forces in precision turning. 90:1605-1615. 2017
- Tribological behavior of superduplex stainless steel against PVD hard coatings on cemented carbide. 90:1649-1658. 2017
- On the surface quality of additive manufactured parts. 89:1969-1974. 2017
- Optimal preventive and opportunistic maintenance policy for a two-unit system. 89:665-673. 2017
- Influence of friction models on FE simulation results of orthogonal cutting process. 88:3217-3232. 2017
- A hybrid framework for integrating multiple manufacturing clouds. 86:895-911. 2016
- Improved prediction of cutting forces via finite element simulations using novel heavy-load, high-temperature tribometer friction data. 86:2037-2045. 2016
- Effect of microstructure softening events on the chip morphology of AISI 1045 steel during high speed machining. 82:2149-2155. 2016
- Interim feature-based cutting parameter optimization for aircraft structural parts. 77:663-676. 2015
- Integrated manufacturing process planning and control based on intelligent agents and multi-dimension features. 75:1457-1471. 2014
- Improvement in robustness and computational efficiency of material models for finite element analysis of metal powder compaction and experimental validation. 68:1785-1795. 2013
- On stress propagation and fracture in compacted graphite iron. 56:233-244. 2011
- Force prediction and stability analysis of plunge milling of systems with rigid and flexible workpiece. 54:853-877. 2011
- Control of a dual stage magnetostrictive actuator and linear motor feed drive system. 33:379-388. 2007
- Optimization of cutting parameters in micro end milling operations in dry cutting condition using genetic algorithms. 30:1030-1039. 2006
- Multi-objective optimization of forming parameters for tube hydroforming process based on the Taguchi method. 28:23-30. 2006
- A solid modeler based ball-end milling process simulation. 22:775-785. 2003
- On-Line Production Control of Tandem Systems with Finite Inter-Stage Storage, Using a Dynamic Maximum Cycle Time Algorithm. 16:147-154. 2000
- A novel representation of tandem systems with inter-stage storage applied to on-line system monitoring. 14:220-227. 1998
- General geometric modelling approach for machining process simulation. 13:237-247. 1997
- Prediction of tool failure rate in turning hardened steels. 13:1-16. 1997
- An investigation of a heat pipe cooling system for use in turning on a lathe. 10:357-366. 1995
- Parametric modelling and control of the robotic grinding process. 8:182-192. 1993
- Analysis of the robotic disc grinding process. 7:82-92. 1992