publication venue for
- Vibration damping capability of electrical discharge machined surfaces: Characteristics, mechanism and application. 177:103888-103888. 2022
- The possibility of performing FEA analysis of a contact loading process fed by the MD simulation data. 134:79-80. 2018
- Effect of dynamic recrystallization at tool-chip interface on accelerating tool wear during high-speed cutting of AISI1045 steel. 100:72-80. 2016
- Acoustic emission spikes at workpiece edges in grinding: Origin and applications. 64:96-101. 2013
- Micro-texturing channel surfaces on glass with spark assisted chemical engraving. 57:66-72. 2012
- Determination of pressure-dependent friction coefficient from draw-bend test and its application to cup drawing. 56:69-78. 2012
- Modeling the effect of the microstructure of compacted graphite iron on chip formation. 51:753-765. 2011
- Breakout detection in fast hole electrical discharge machining. 50:922-925. 2010
- Predicting the effect of vibration on ultraprecision machining surface finish as described by surface finish lobes. 49:1165-1174. 2009
- Thrust force model for vibration-assisted drilling of aluminum 6061-T6. 49:1070-1076. 2009
- In-process detection of surface porosity in machined castings. 49:530-535. 2009
- Electrical discharge milling with oblong tools. 49:149-155. 2009
- Investigation of wear behavior and chip formation for cutting tools with nano-multilayered TiAlCrN/NbN PVD coating. 48:656-665. 2008
- The influence of cutter orientation and workpiece angle on machinability when high-speed milling Inconel 718 under finishing conditions. 47:1839-1846. 2007
- An improved cutting force and surface topography prediction model in end milling. 47:1263-1275. 2007
- Application of ultra-thin fluorine-content lubricating films to reduce tool/workpiece adhesive interaction during thread-cutting operations. 47:521-528. 2007
- Helical milling: An enabling technology for hard machining precision holes in AISI D2 tool steel. 47:205-210. 2007
- Modeling the effects of microstructure in metal cutting. 47:368-375. 2007
- Modelling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316L. 47:401-411. 2007
- Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditions. 47:263-272. 2007
- High-power diode laser assisted hard turning of AISI D2 tool steel. 46:2009-2016. 2006
- Prediction of cutting forces in the micro-machining of silicon using a “hybrid molecular dynamic-finite element analysis” force model. 46:1727-1739. 2006
- Surface defects during microcutting. 46:1378-1387. 2006
- Chip formation during microscale cutting of a medium carbon steel. 46:467-481. 2006
- A three-dimensional analytical cutting force model for micro end milling operation. 46:353-366. 2006
- Finite element modeling of erosive wear. 45:1337-1346. 2005
- Experimental determination of the friction coefficient on the workpiece-fixture contact surface in workholding applications. 45:705-712. 2005
- Design and control of a dual-stage feed drive. 45:153-165. 2005
- Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminum alloy. 45:219-227. 2005
- Novel methods for rapid assessment of tool performance in milling. 44:1599-1605. 2004
- Model-based controller design for machine tool direct feed drives. 44:465-477. 2004
- Identification of acceleration deceleration profile of feed drive systems in CNC machines. 43:441-451. 2003
- Optimized feed scheduling in three axes machining. 43:269-282. 2003
- Optimized feed scheduling in three axes machining. Part I: Fundamentals of the optimized feed scheduling strategy. 43:253-267. 2003
- From the basic mechanics of orthogonal metal cutting toward the identification of the constitutive equation. 42:1373-1383. 2002
- A chip formation based analytic force model for oblique cutting. 42:529-538. 2002
- Optimal nesting of irregular convex blanks in strips via an exact algorithm. 41:991-1002. 2001
- Motion control for linear motor feed drives in advanced machine tools. 41:479-507. 2001
- Adaptive compensation of quasi-static errors for an intrinsic machine. 40:2267-2291. 2000
- High-speed five-axis milling of hardened tool steel. 40:869-885. 2000
- Kinematic and geometric error compensation of a coordinate measuring machine. 40:833-850. 2000
- High speed servo control of multi-axis machine tools. 40:539-559. 2000
- Simulation of diamond-ground surfaces. 39:1451-1470. 1999
- Effects of process parameters on material side flow during hard turning. 39:1017-1030. 1999
- Modelling of temperature and forces when orthogonally machining hardened steel. 39:885-903. 1999
- An improved process simulation system for ball-end milling of sculptured surfaces. 38:1089-1107. 1998
- On the dynamics of ball end milling: modeling of cutting forces and stability analysis. 38:215-237. 1998
- Stochastic simulation approach to modelling diamond wheel topography. 37:751-761. 1997
- Closed form formulation of cutting forces for ball and flat end mills. 37:17-27. 1997
- Mechanism of material removal in electrical discharge diamond grinding. 36:1173-1185. 1996
- Tool condition monitoring in drilling using vibration signature analysis. 36:687-711. 1996
- Cutting temperature of ceramic tools in high speed machining of difficult-to-cut materials. 36:611-634. 1996
- In-process evaluation of workpiece geometrical tolerances in bar turning. 36:33-46. 1996
- Modelling geometric and thermal errors in a five-axis cnc machine tool. 35:1321-1337. 1995
- A multi-sensor strategy for tool failure detection in milling. 35:383-398. 1995
- An investigation of the use of heat pipes for machine tool spindle bearing cooling. 34:1031-1043. 1994
- Surface topography characterization in finish milling. 34:245-255. 1994
- Optimal planning of an adaptively controlled robotic disk grinding process. 33:809-825. 1993
- Tool condition monitoring in turning using fuzzy set theory. 32:781-796. 1992
- Workpiece burn and surface finish during controlled force robotic disk grinding. 32:797-809. 1992
- Surface finish in robotic disk grinding. 32:269-279. 1992
- In-process monitoring of tool wear in milling using cutting force signature. 31:55-73. 1991
- Analysis of rigid-disk wear during robotic grinding. 30:521-534. 1990
- Analysis of stresses during exit in interrupted cutting with champfered tools. 29:519-534. 1989
- Parameter adaptive control in peripheral milling. 27:399-414. 1987