Mining & Metallurgy Concept

subject area of

• 137 Kinetic studies of reactions between carbon-saturated iron alloys and Na_2S sulphide slags(STEELMAKING, The 108th ISIJ Meeting)  Journal Articles
• 2015 T.C. Graham prize winner: High-strength interstitial-free steel obtained using FeC amorphous films and induction heating for packaging applications and cladding with lighter metals for car body panels  Journal Articles
• A COMMENT ON THE RECRYSTALLIZATION BEHAVIOR OF AL-MG ALLOYS  Journal Articles
• A Computational Fluid Dynamics Model of Shrouded Supersonic Jet Impingement on a Water Surface  Journal Articles
• A Critical Review of the Modified Froude Number in Ladle Metallurgy  Journal Articles
• A Decarburization Model for a Fe–C Droplet Reacting in Oxidizing Slag  Journal Articles
• A GENERAL-APPROACH TO THE MODELING OF HIGH-TEMPERATURE CRACK-GROWTH  Conferences
• A Kinetic Model for Modification of MgAl2O4 Spinel Inclusions During Calcium Treatment in the Ladle Furnace  Journal Articles
• A Kinetic Study of Tank Degassing Decarbunization  Journal Articles
• A LABOR VIEW OF ENVIRONMENTAL-ISSUES IN URANIUM MINING AND MILLING  Journal Articles
• A Mathematical Model for Air Atomization of Molten Slag Based on Integral Conservation Equations  Journal Articles
• A Mathematical Model for Carbothermic Reduction of Dust-Carbon Composite Agglomerates  Journal Articles
• A Model for Slag Eyes in Steel Refining Ladles Covered with Thick Slag  Journal Articles
• A Model of Isothermal and Non Isothermal Transformation Kinetics of Bainite in 0.5% C Steels.  Journal Articles
• A Multi-scale Thermomechanical-Solidification Model to Simulate the Transient Force Field Deforming an Aluminum 6061 Semisolid Weld  Conferences
• A Multilayer Model for Alumina Inclusion Transformation by Calcium in the Ladle Furnace  Journal Articles
• A Parametric Study of a Multi-Slot Air Knife for Coating Thickness Reduction  Journal Articles
• A Physical Modeling Study of Fluid-flow Phenomena in Gas-Slag.  Journal Articles
• A Study of Scrap Heating By Burners. Part I: Experiments  Journal Articles
• A Study of Scrap Heating by Burners: Part II—Numerical Modeling  Journal Articles
• A Study of Spouts on Bath Surfaces from Gas Bubbling: Part I. Experimental Investigation  Journal Articles
• A Study of Spouts on Bath Surfaces from Gas Bubbling: Part II. Elucidation of Plume Dynamics  Journal Articles
• A Study on Hot Tearing in Direct Chill Casting of Al-Mn-Mg Alloys Using a Multi-scale Approach  Theses
• A Theoretical Investigation of Kinetics and Mechanisms of Iron Ore Reduction in an Ore/Coal Composite.  Journal Articles
• A Unified Approach to the Fluid Dynamics of Gas–Liquid Plumes in Ladle Metallurgy  Journal Articles
• A Water Model Study of Impinging Gas Jets on Liquid Surfaces  Journal Articles
• A comprehensive kinetic model for the CO-CO2 reaction with iron oxide-containing slags  Journal Articles
• A continuum theory of granular media partially saturated with a viscous fluid  Journal Articles
• A coupled finite element-boundary element method of stress analysis  Journal Articles
• A linkage between the activity and the chemical potential  Journal Articles
• A model for initiation and growth of damage in dualphase steels identified by X-ray micro-tomography  Journal Articles
• A molecular dynamics study of the nucleus interface structure and orientation relationships during the austenite-to-ferrite transformation in pure Fe  Journal Articles
• A multi-phase model for plumes in powder injection refining processes  Journal Articles
• A multiphase fluid mechanics approach to gas holdup in bath smelting processes  Journal Articles
• A neutron radiographic in vitro examination of soils Technical note. 4F, 7R. CAN. GEOTECH. J, V12, 1, FEB. 1975, P152–P156  Journal Articles
• A pressurized screw feeder for powder injection  Journal Articles
• A review of the beneficiation of low-grade manganese ores by magnetic separation  Journal Articles
• A study of ion activities in ionic solutions  Journal Articles
• A tribute to Professor G.R. Purdy  Journal Articles
• A unified approach to bubbling-jetting phenomena in powder injection into iron and steel  Journal Articles
• A variational hydraulic fracturing model coupled to a reservoir simulator  Journal Articles
• A viscoplastic behavior law for ferritic steels at low homologous temperature  Journal Articles
• A water model and numerical study of the spout height in a gas-stirred vessel  Journal Articles
• AIST transactions  Journal Articles
• AN INVESTIGATION OF CALCIUM-WIRE TREATMENT OF STEEL  Conferences
• ANALYSIS OF INCLUSION DISTRIBUTION OF HSLA STEELS  Conferences
• APPLICATIONS OF FRACTURE MECHANICS IN FAILURE ANALYSIS CASE STUDIES.  Journal Articles
• ASSESSMENT OF FRACTURE PROPERTIES IN HSLA STEEL CONTAINING TI AND NB  Conferences
• Abnormal and post-abnormal austenite grain growth kinetics in Nb–Ti microalloyed steels  Journal Articles
• Acoustic Emission During Corrosion  Journal Articles
• Adiabatic Carbon Rate of Alternative Ironmaking Processes to Produce Hot Metal  Journal Articles
• Advances in Materials Manufacturing II  Journal Articles
• Advancing face simulation of tunnel excavations and lining placement  Journal Articles
• Agglomeration of Non-metallic Inclusions at Steel/Ar Interface: In-Situ Observation Experiments and Model Validation  Journal Articles
• Agglomeration of Non-metallic Inclusions at the Steel/Ar Interface: Model Application  Journal Articles
• Alloy design of graded Zn-Cr PVD coatings for corrosion protection of cold formed automotive parts  Journal Articles
• Alternative Al production methods  Journal Articles
• Alternative Al production methods  Journal Articles
• Alternative route for magnetite processing for lower carbon footprint iron-making through lime-magnetite pellets containing CaFe₃O₅  Journal Articles
• An Analysis of Recirculatory Flow in Gas‐Stirred Ladles  Conferences
• An Assessment of the General Applicability of the Relationship Between Nucleation of CO Bubbles and Mass Transfer of Phosphorus in Liquid Iron Alloys  Journal Articles
• An Extended Model for Slag Eye Size in Ladle Metallurgy  Journal Articles
• An Improved Correlation for Predicting Terminal Velocity of Droplets and Bubbles in Slag-Metal-Gas Emulsion.  Journal Articles
• An Original Way for Producing a 2.4 GPa Strength Ductile Steel by Rolling of Martensite  Journal Articles
• An investigation of radium extraction from uranium mill tailings  Journal Articles
• Analyses of CWF (CaFe₃O₅) phase formation in lime-magnetite pellets  Journal Articles
• Analysis of Droplet Generation in Oxygen Steelmaking  Journal Articles
• Analysis of Microstructural Changes in the Heat-Affected Zone and Fusion Zone of a Fiber Laser Welded DP980 Steel  Conferences
• Analysis of interfacial area changes during spontaneous emulsification of metal droplets in slag  Journal Articles
• Analysis of steelmaking kinetics from IMPHOS pilot plant data  Journal Articles
• Analysis of the Effect of Mn on the Recrystallization Kinetics of High Nb Steel: An Example of Physically-based Alloy Design  Journal Articles
• Analysis of the source of dynamic interfacial phenomena during reaction between metal droplets and slag  Journal Articles
• Analytical Evaluation of Heat Flow in Oxygen Steelmaking  Journal Articles
• Analytical representation of Mohr failure envelope approximating the generalized Hoek-Brown failure criterion  Journal Articles
• Application of Optical Floating Zone Method to Dissolution Kinetics of Inclusions in a Steelmaking Slag  Journal Articles
• Application of Thermodynamic Model for Inclusion Control in Steelmaking to Improve the Machinability of Low Carbon Free Cutting Steels  Journal Articles
• Application of critical plane approach to the prediction of strength anisotropy in transversely isotropic rock masses  Journal Articles
• Application of mass and energy balance in oxygen steelmaking  Journal Articles
• Application of vibration and sound signals in monitoring iron and steelmaking processes  Journal Articles
• Applying the latest microscopy techniques to study phase transformations at rail surfaces  Journal Articles
• Archives of Metallurgy and Materials  Journal
• Argon-Oxygen Decarburization of High Manganese Steels: Effect of Temperature, Alloy Composition, and Submergence Depth  Journal Articles
• Argon–Oxygen Decarburization of High‐Manganese Steels: Effect of Alloy Composition  Journal Articles
• Attack of Submerged Entry Nozzles by Mould Flux and Dissolution of Refractory Oxides in the Flux.  Journal Articles
• Attenuation of sound signals in foams for the basic oxygen furnace using physical modelling techniques  Journal Articles
• AusIMM Bulletin  Journal
• Austenite Nucleation and Growth as a Function of Starting Microstructure for a Fe–0.15C–5.56Mn–1.1Si–1.89Al Medium‐Mn Steel  Journal Articles
• Austenite particle coarsening and delta-ferrite grain growth in model Fe–Al alloy  Journal Articles
• Authors’ Reply  Journal Articles
• Bainite transformation stasis controlled by plastic work in austenite  Journal Articles
• Bench Scale Test of a New Ironmaking Process with Mixture of Iron Ore Concentrate and Pulverized Coal.  Journal Articles
• Bubble Size Determination in a Half-Scale Curved Water Model Mold for Various Casting Conditions Using Imaging and Machine Learning  Journal Articles
• Bubble formation at nozzles in pig iron  Journal Articles
• Bubbling Behaviour in Molten Metals  Journal Articles
• Building of a Mathematical Model for the Reduction of Iron Ore in Ore/Coal Composites.  Journal Articles
• CALCIUM CARBIDE POWDER INJECTION INTO HOT METAL .1. HEAT-TRANSFER TO PARTICLES  Journal Articles
• CALCIUM CARBIDE POWDER INJECTION INTO HOT METAL .2. SIMULTANEOUS DESULFURIZATION AND DEOXIDATION  Journal Articles
• CALCULATION OF CAS AND MNS ACTIVITIES AND THEIR APPLICATION TO CALCIUM TREATMENT OF STEEL  Journal Articles
• CALCULATION OF TOUGHNESS PARAMETERS FROM SMALL-SCALE TESTS  Conferences
• CANADIAN DEVELOPMENTS IN THE USE OF WASTES AND BY-PRODUCTS  Journal Articles
• CFD Modeling of Swirl and Nonswirl Gas Injections into Liquid Baths Using Top Submerged Lances  Journal Articles
• CFD analysis of oxygen steelmaking kinetics and slag foaming using IMPHOS pilot plant data  Journal Articles
• CFD simulation on influence of suspended solid particles on bubbles' coalescence rate in flotation cell  Journal Articles
• CHARACTERIZATION OF INTERFACES IN METAL-MATRIX COMPOSITES  Conferences
• CIM Bulletin  Journal
• COMPARISON OF IRON DESULFURIZATION USING CALCIUM CARBIDE AND LIME MAGNESIUM MIXTURES  Journal Articles
• CONSEQUENCES OF MICROSEGREGATION IN CONTINUOUSLY CAST HSLA STEELS  Conferences
• CONTROLLED ROLLING OF SHEET PRODUCTS IN ACICULAR FERRITIC STEEL  Journal Articles
• CUMULATIVE DAMAGE MODEL FOR DUCTILE FAILURE  Conferences
• CYCLING OF ALKALIES, SILICON, SULFUR AND LEAD AND THEIR COMBINED EFFECTS OF SOFTENING AND MELTING ZONES IN BLAST-FURNACES  Conferences
• Calculation of Initial Stage of Solidified Shell Deformation during <i>γ</i> to <i>δ</i> Transformation in Mold  Journal Articles
• Calculation of Initial Stage of Solidified Shell Deformation during δ to γ Transformation in Mold  Journal Articles
• Canadian Metallurgical Quarterly  Journal
• Canadian pyrrhotite treatment: the history, inventory and potential for tailings processing  Conferences
• Cathodic Electrodeposition of Ceramic Coatings for Oxidation Protection of Materials at Elevated Temperatures  Journal Articles
• Challenges in light metals production  Journal Articles
• Characterisation of titania slag produced by a novel process: acidolysis performance  Journal Articles
• Characterization and Modeling of Manganese Effect on Strength and Strain Hardening of Martensitic Carbon Steels  Journal Articles
• Characterization of Constitutive Behavior of Dissimilar Aluminum Alloy Resistance Spot Welds  Journal Articles
• Characterization of Pore Defects and Fatigue Cracks in Die Cast AM60 Using 3D X-ray Computed Tomography  Conferences
• Characterization of the hot cracking resistance using the Essential Work of Fracture (EWF): application to duplex stainless steels  Journal Articles
• Chemical kinetics of gaseous reduction of hematite  Journal Articles
• Coating Weight Model for the Continuous Hot-Dip Galvanizing Process  Journal Articles
• Coextraction of uranium and radium from ore with ferric chloride  Journal Articles
• Cold Bond Agglomeration of Waste Oxides for Recycling  Journal Articles
• Cold Model Study of Emulsification Behavior in Bottom Blown Metallurgical Baths Covered with Thick Slag  Journal Articles
• Cold model study of sound signals from gas-stirred ladles  Journal Articles
• Collagen proteins in electrorefining: Rate constants for glue hydrolysis and effects of molar mass on glue activity  Journal Articles
• Communications  Journal Articles
• Comparison of Damage Evolution in Different Steels by Means of 3D X Ray Tomography  Conferences
• Comprehensive Model of Oxygen Steelmaking Part 1: Model Development and Validation  Journal Articles
• Comprehensive Model of Oxygen Steelmaking Part 2: Application of Bloated Droplet Theory for Decarburization in Emulsion Zone  Journal Articles
• Comprehensive Model of Oxygen Steelmaking Part 3: Decarburization in Impact Zone  Journal Articles
• Computational Fluid Dynamic Modeling of Zinc Slag Fuming Process in Top-Submerged Lance Smelting Furnace  Journal Articles
• Computational Fluid Dynamics (CFD) Investigation of Submerged Combustion Behavior in a Tuyere Blown Slag-fuming Furnace  Journal Articles
• Computational Fluid Dynamics Modeling of Supersonic Coherent Jets for Electric Arc Furnace Steelmaking Process  Journal Articles
• Computational Fluid Dynamics Simulation of Supersonic Oxygen Jet Behavior at Steelmaking Temperature  Journal Articles
• Consideration of the Competitive Adsorption of Oxygen and Sulfur on the Decarburization Kinetics of Fe–C Droplets in Oxidizing Slag  Journal Articles
• Considerations for the design of gas stirring in ladle metallurgy  Journal Articles
• Constitutive model of the TWIP effect in a polycrystalline high manganese content austenitic steel  Journal Articles
• Continuous Casting Tundish Dead Volume Study by Physical Modeling and Computational Investigation  Journal Articles
• Continuous Hot‐Dip Galvanizing of Medium‐Manganese Third‐Generation Advanced High‐Strength Steels  Journal Articles
• Continuous Reduction of Iron Ore with Coal in an Electrically Heated Furnace  Journal Articles
• Control of edge breaks during cold mill processing of commercial and drawing quality low-carbon steels  Journal Articles
• Correction to: Dephosphorization Kinetics between Bloated Metal Droplets and Slag Containing FeO: The Influence of CO Bubbles on the Mass Transfer of Phosphorus in the Metal  Journal Articles
• Corrosion Behaviour of an Experimental Nickel Aluminum Bronze Within an Artificial Crevice  Journal Articles
• Corrugation Reinforced Architectured Materials by Direct Laser Hardening: A Study of Geometrically Induced Work Hardening in Steel  Journal Articles
• Critical role of carbon during production of ferroniobium alloy additions  Journal Articles
• Crystallization Behaviors of Spinel During Cooling Process of Modified EAF Slag  Journal Articles
• DAMAGE ACCUMULATION IN DUCTILE AND SHEAR FRACTURE PROCESSES  Conferences
• Decarburization of Bloated Droplets: An Experimental Study to Understand the Kinetics of Decarburization of Metallic Iron Droplets in FeO Containing CaO-SiO2 Slags  Journal Articles
• Decarburization of Iron Carbon Droplets with Oxidizing Slag: An Experimental Study to Understand the Effect of Ionic and Electronic Conductivity on Decarburization Kinetics  Journal Articles
• Decarburization of Levitated Fe-Cr-C Droplets by Carbon Dioxide  Journal Articles
• Defect structure of pseudo phases of wüstite  Journal Articles
• Deformation Twinning in Iron Alloys Containing Dispersed Particles  Journal Articles
• Degradation of MgO Refractory in CaO-SiO2-MgO-FeOx and CaO-SiO2-Al2O3-MgO-FeOx Slags under Complex Flow Conditions  Journal Articles
• Dephosphorization Kinetics between Bloated Metal Droplets and Slag Containing FeO: The Influence of CO Bubbles on the Mass Transfer of Phosphorus in the Metal  Journal Articles
• Dephosphorization Kinetics of Bloated Metal Droplets Reacting with Basic Slag Containing TiO₂  Journal Articles
• Dephosphorization of Levitated Silicon-Iron Droplets for Production of Solar-Grade Silicon  Journal Articles
• Description of clay anisotropy employing the concept of directional variation of porosity  Journal Articles
• Description of damage process in fractured rocks  Journal Articles
• Design of mould fluxes for continuous casting of special steels  Journal Articles
• Design of steels for high speed machining  Journal Articles
• Desulphurization of Hot Metal and Ferronickel With Calcium Aluminate Fluxes  Journal Articles
• Development of a Multi-oxide Kinetic Model to Study Inclusion Transient Evolution in Molten Steel: Application to Si–Mn Killed Steel  Journal Articles
• Development of an Optimization Methodology for the Aluminum Alloy Wheel Casting Process  Conferences
• Development of medium-to-high carbon hot-rolled steel strip on a thin slab casting direct strip production complex  Journal Articles
• Developments in blast furnace process control at Port Kembla  Journal Articles
• Developments in blast furnace process control at port kembla based on process fundamentals  Journal Articles
• Developments in electric arc furnace steelmaking  Journal Articles
• Die soldering: Mechanism of the interface reaction between molten aluminum alloy and tool steel  Journal Articles
• Diffusion and Flow of CO2 in Carbon Anode for Aluminium Smelting  Journal Articles
• Dissimilar Resistance Spot Welding of Aluminum to Magnesium with Zn-Coated Steel Interlayers  Journal Articles
• Dissolution Behavior of Aluminum Titanate Inclusions in Steelmaking Slags  Journal Articles
• Dissolution of alumina in mold fluxes  Journal Articles
• Distribution of Carbon in Martensite During Quenching and Tempering of Dual Phase Steels and Consequences for Damage Properties  Journal Articles
• Driving Force and Logic of Development of Advanced High Strength Steels for Automotive Applications  Journal Articles
• Droplet Heat Transfer in Oxygen Steelmaking  Journal Articles
• Drying Kinetics of a Philippine Nickel Laterite Ore by Microwave Heating  Journal Articles
• Dynamic Model of Basic Oxygen Steelmaking Process Based on Multi-zone Reaction Kinetics: Model Derivation and Validation  Journal Articles
• Dynamic Model of Basic Oxygen Steelmaking Process Based on Multizone Reaction Kinetics: Modeling of Decarburization  Journal Articles
• Dynamic Model of Basic Oxygen Steelmaking Process Based on Multizone Reaction Kinetics: Modeling of Manganese Removal  Journal Articles
• Dynamic natural gas control via architech solution  Journal Articles
• Dynamic simulation of pellet induration process in straight-grate system  Journal Articles
• EFFECT OF AUTOMATION AND INFORMATION-PROCESSING ON THE RESULT OF COMPANIES  Journal Articles
• EFFECT OF SODIUM ON THE SWELLING OF HEMATITE DURING REDUCTION.  Journal Articles
• EFFECT of surface treatment on corrosion control of P91 hydrothermal aqueous solutions  Journal Articles
• EFFECTS OF GANGUE MINERALS AND FLUXES ON THE QUALITY OF IRON ORE PELLETS.  Journal Articles
• EFFECTS OF INERT CARBONACEOUS ADDITIVES ON COKE PROPERTIES  Journal Articles
• ELECTRIC ARC FURNACE DUST INJECTION INTO IRON AND STEEL MELTS  Journal Articles
• Effect of Additives on the Strength, Reducibility and Swelling of Low Silica Iron Ore Pellets  Journal Articles
• Effect of Annealing Atmosphere and Steel Alloy Composition on Oxide Formation and Radiative Properties of Advanced High-Strength Steel Strip  Journal Articles
• Effect of Annealing Temperature on the Selective Oxidation and Reactive Wetting of a 0.1C-6Mn-2Si Advanced High Strength Steel During Continuous Galvanizing Heat Treatments  Conferences
• Effect of Build-ups on Ladle Wall on Acoustic Signals in Gas-Stirred Ladles  Journal Articles
• Effect of Coarse-grain and Low-grade Iron Ores on Sinter Properties  Journal Articles
• Effect of Diamond Particle Size on the Thermal Properties of Diamond/Al Composites for Packaging Substrate  Journal Articles
• Effect of Nb on Ferrite Recrystallization and Austenite Decomposition in Microalloyed Steels  Conferences
• Effect of Precipitate Size and Dispersion on Lankford Values of Titanium Stabilized Interstitial-free Steels.  Journal Articles
• Effect of Processing Parameters on Crystal Orientation of Microstructure in High Niobium-Bearing Microalloyed Steel  Conferences
• Effect of Slag Composition on the Crystallization Kinetics of Synthetic CaO-SiO2-Al2O3-MgO Slags  Journal Articles
• Effect of a high magnetic field on the ferritic transformation in a low carbon steel  Journal Articles
• Effect of agglomeration on nickel extraction and sulfur release from ultramafic nickel sulfide concentrates  Journal Articles
• Effect of alloy addition on inclusion evolution in stainless steels  Journal Articles
• Effect of chromium–sulphur interactions on decarburisation of levitated Fe–C alloy droplets by CO₂–Ar gas mixtures  Journal Articles
• Effect of dissolved oxygen on the surface tension of liquid iron  Journal Articles
• Effect of dissolved oxygen on the surface tension of liquid iron  Journal Articles
• Effect of gangue on CO₂ emission for different decarbonisation pathways  Journal Articles
• Effect of impurity oxides on CWF (CaFe₃O₅) formation in lime magnetite pellets – part I: thermodynamic assessments and experimental investigations  Journal Articles
• Effect of impurity oxides on CWF (CaFe₃O₅) formation in lime magnetite pellets – part II: microstructural analysis and physical and mechanical testing  Journal Articles
• Effect of internal oxidation on the weldability of CMnSi steels  Journal Articles
• Effect of surface preparation on the corrosion resistance of friction stir linear lap welded AZ31B-H24  Journal Articles
• Effect of water vapour partial pressure on the chromia (Cr₂O₃)-based scale stability  Journal Articles
• Effects of Heat Input and Martensite on HAZ Softening in Laser Welding of Dual Phase Steels  Journal Articles
• Effects of Mold Temperature and Pouring Temperature on the Hot Tearing of Cast Al-Cu Alloys  Journal Articles
• Effects of electrode degradation on electrode life in resistance spot welding of aluminum alloy 5182  Journal Articles
• Effects of temporal pulse shaping on cracking susceptibility of 6061-T6 aluminum Nd:YAG laser welds  Journal Articles
• Electrical and electronic conductivity of CaO-SiO2-FeO x slags at various oxygen potentials: Part I. Experimental results  Journal Articles
• Electrical and electronic conductivity of CaO-SiO2-FeOx slags at various oxygen potentials: Part II. Mechanism and a model of electronic conduction  Journal Articles
• Electrically Enhanced Boron Removal from Silicon Using Slag  Journal Articles
• Energy Balance Around Gas Injection into Oxygen Steelmaking  Journal Articles
• Energy Dissipation Distribution in Gas-stirred Liquids.  Journal Articles
• Entrainment From A Flat Liquid-Liquid Interface  Journal Articles
• Erratum to: Progress in Slag Foaming in Metallurgical Processes  Journal Articles
• Erratum: Droplet solidification of impulse atomized Al-0.61Fe and Al-1.9Fe (Canadian Metallurgical Quarterly (2010) 49:3 (275-292))  Journal Articles
• Estimating terminal phase equilibria in ternary systems  Journal Articles
• Evaluating the Effect of the Competition between NbC Precipitation and Grain Size Evolution on the Hot Ductility of Nb Containing Steels  Journal Articles
• Evaluating the Effect of the Competition between NbC Precipitation and Grain Size Evolution on the Hot Ductility of Nb Containing Steels  Journal Articles
• Evaluation of stirring in electric arc furnaces  Journal Articles
• Exfoliation corrosion of an extruded low-Cu-containing AA7003-T6 profile with a partially recrystallised grain structure  Journal Articles
• Exfoliation corrosion of artificially aged AA7003 extrusions  Journal Articles
• Experimental and Numerical Study of Coating Thickness Using Multi-slot Air Knives  Journal Articles
• Experimental investigation and development of a deep learning framework to predict process-induced surface roughness in additively manufactured aluminum alloys  Journal Articles
• Explaining the gap between ASIC and custom power  Journal Articles
• Extraction of Nickel from Ultramafic Nickel Sulfide Concentrate by Metallic Iron Addition  Journal Articles
• Extraction of copper from copper and cadmium residues of zinc hydrometallurgy by oxidation acid leaching and cyclone electrowinning  Journal Articles
• FAILURE MAPS FOR DUCTILE FRACTURE PROCESSES  Conferences
• FRACTOGRAPHIC STUDIES  Conferences
• Failure criteria for rocks based on smooth approximations to Mohr–Coulomb and Hoek–Brown failure functions  Journal Articles
• Fe Solubility in the Zn-Rich Corner of the Zn-Al-Fe System for Use in Continuous Galvanizing and Galvannealing  Journal Articles
• Ferrite Transformation in High Magnetic Field Monitored by in-situ Magnetic Measurements  Journal Articles
• Ferronickel Generation from Nickel Sulfide Concentrates by Metallic Iron Addition: Optimization of the Nickel Extraction Process  Journal Articles
• Fiber Laser Welding of Al-Si-Coated Press-Hardened Steel  Journal Articles
• Finite element modeling of transient heat transfer and microstructural evolution in welds: Part II. Modeling of grain growth in austenitic stainless steels  Journal Articles
• Flash Furnace Off-Gas Cooling in a Plate Column: Reduction of Pressure Drop by Column Design Modification  Journal Articles
• Flotation froth monitoring using multiresolutional multivariate image analysis  Journal Articles
• Flow patterns and mixing in a cold model of the Inco flash furnace  Journal Articles
• Fluidized Bed Selective Oxidation-Sulfation Roasting of Nickel Sulfide Concentrate: Part I. Oxidation Roasting  Journal Articles
• Fluidized Bed Selective Oxidation-Sulfation Roasting of Nickel Sulfide Concentrate: Part II. Sulfation Roasting  Journal Articles
• Force balance in an operating blast furnace  Conferences
• Formation of Inclusions in Ti-Stabilized 17Cr Austenitic Stainless Steel  Conferences
• Formation of Nondendritic Primary Aluminum Phase in Hypoeutectic Alloys in Controlled Diffusion Solidification (CDS): A Hypothesis  Journal Articles
• Fracture Toughness of Welded Low Alloy Steels  Journal Articles
• Fracture in quench-aged low-carbon steels  Journal Articles
• Fracture of steels containing pearlite  Journal Articles
• Froth-based modeling and control of flotation processes  Journal Articles
• Future directions in oxygen steelmaking  Journal Articles
• GAS SLAG REACTION KINETICS IN SLAG CLEANING OF COPPER SLAGS  Journal Articles
• General heat balance for oxygen steelmaking  Journal Articles
• General mass balance for oxygen steelmaking  Journal Articles
• Generation of Droplets in Slag-Metal Emulsions through Top Gas Blowing  Journal Articles
• Generation of titania-rich slag and iron from ilmenite concentrate by carbothermic reduction and magnetic separation in the presence of Na₂CO₃  Journal Articles
• Geotechnical design aspects for large gravity retaining structures under seismic loading  Journal Articles
• Graphitization of Coke and Its Interaction with Slag in the Hearth of a Blast Furnace  Journal Articles
• Growth of Austenite in the Intercritical Annealing of Fe-C-Mn Dual Phase Steels  Journal Articles
• Guidelines to design the scope of a geotechnical risk assessment for underground mines  Journal Articles
• HIGH-TEMPERATURE DAMAGE PROCESSES IN STRUCTURAL CERAMICS  Conferences
• HIGH-TEMPERATURE STABILITY IN STRUCTURAL CERAMICS  Conferences
• HOT WORKABILITY OF 2304 AND 2205 DUPLEX STAINLESS STEELS  Journal Articles
• Heat transfer and lance clogging during submerged powder injection  Journal Articles
• Heat-transfer considerations in the bath smelting of composite organic and ferrous wastes  Journal Articles
• Heat-transfer considerations in the bath smelting of composite organic and ferrous wastes  Conferences
• High Temperature behaviour of Directly Reduced Iron Fines  Journal Articles
• High Temperature behaviour of Directly Reduced Iron Fines  Journal Articles
• High resolution magnetic anomaly maps from ERLIS compilation: An example from Kirkland Lake  Journal Articles
• Hydrometallurgy  Journal
• INCLUSION ENGINEERING BY THE CALCIUM TREATMENT OF STEEL  Conferences
• INCLUSIONS AND MACHINABILITY  Conferences
• INCLUSIONS IN CALCIUM-TREATED STEELS  Conferences
• INFLUENCE OF THE CAST STRUCTURE ON THE RECRYSTALLIZATION BEHAVIOUR OF AN Al-Zn-Mg ALLOY.  Journal Articles
• INTERFACIAL REACTION-KINETICS IN THE FE-CAF2 SYSTEM AT 1700-DEGREES-K  Conferences
• ISIJ International  Journal
• Image-based endpoint carbon prediction for a basic oxygen furnace  Journal Articles
• Impact Toughness of A Pipeline Steel  Journal Articles
• Implications of design philosophies for seismic response of steel moment frames  Journal Articles
• In Situ Observation of Calcium Aluminate Inclusions Dissolution into Steelmaking Slag  Journal Articles
• Inclined Jetting and Splashing in Electric Arc Furnace Steelmaking  Journal Articles
• Inclusion characteristics of stainless steel castings  Journal Articles
• Inclusion engineering of steel to prevent chemical tool wear  Conferences
• Inclusion engineering of steels for high speed machining  Journal Articles
• Inclusion evolution during refining and continuous casting of 316L stainless steel  Journal Articles
• Influence of Nb stabilization on the recovery and recrystallization kinetics of a ferritic stainless steel with soft magnetic properties for automotive applications  Journal Articles
• Influence of alloy elements on microstructure and mechanical properties of Al/steel dissimilar joint by laser welding/brazing  Journal Articles
• Influence of chemical composition on the microstructure and mechanical properties of multiphase TRIP-assisted steels processed using thermal cycles compatible with continuous hot-dip galvanizing  Journal Articles
• Influence of cooling rate and composition on formation of intermetallic phases in solidifying Al–Fe–Si melts  Journal Articles
• Influence of lubricants on electrode life in resistance spot welding of aluminum alloys  Journal Articles
• Influence of mould level instability on the unevenness of solidified shell deformations during continuous casting  Journal Articles
• Influence of site effects and period-dependent force modification factors on the seismic response of ductile structures  Journal Articles
• Influence of thermal diffusion on decarburisation of iron–chromium alloy droplets by oxygen–argon gas mixtures  Journal Articles
• Instabilités plastiques en mode de Lüders : simulations numériques et approche par gradients.  Journal Articles
• Integrated Process-Metallurgy Modeling: Example of Precipitation During Coil Cooling  Journal Articles
• Interdiffusion coefficients of Cr and Ni in liquid iron in the stainless steel range  Journal Articles
• Interfaces Between Coke, Slag, and Metal in the Tuyere Level of a Blast Furnace  Journal Articles
• Interfacial microstructure of diode laser brazed AZ31B magnesium to steel sheet using a nickel interlayer  Journal Articles
• Interfacial microstructure of laser brazed AZ31B magnesium to sn-plated steel sheet: Brazeability, interfacial microstructure, and mechanical properties were investigated  Journal Articles
• International Journal of Mineral Processing  Journal
• International Journal of Minerals, Metallurgy and Materials  Journal
• International Journal of Rock Mechanics and Minings Sciences  Journal
• Investigation of Anodic Gas Film Behavior in Hall–Heroult Cell Using Low Temperature Electrolyte  Journal Articles
• Investigation of the Influence of Slag Basicity on Metal Droplet Dephosphorization  Journal Articles
• Iron and Steel Technology  Journal
• Iron and Steelmaker (I and SM)  Journal
• Ironmaking and Steelmaking  Journal
• Jinshu Xuebao/Acta Metallurgica Sinica  Journal
• Journal of Iron and Steel Research International  Journal
• Journal of Mining Science  Journal
• Journal of the South African Institute of Mining and Metallurgy  Journal
• Journées Sidérurgiques Internationales 2002 de l'ATS  Journal Articles
• KINETIC ASPECTS OF MAGNESIUM DESULPHURIZATION OF BLAST FURNACE IRON.  Journal Articles
• KINETICS AND MECHANISMS OF CALCIUM DISSOLUTION AND MODIFICATION OF OXIDE AND SULFIDE INCLUSIONS IN STEEL  Journal Articles
• KINETICS OF COAL INJECTION INTO IRON OXIDE CONTAINING SLAGS  Journal Articles
• KINETICS OF COAL INJECTION INTO IRON OXIDE CONTAINING SLAGS  Journal Articles
• Kang T'ieh/Iron and Steel (Peking)  Journal
• Kinetic Modeling of the Silicothermic Reduction of Manganese Oxide from Slag  Journal Articles
• Kinetic analysis of silicothermic process under flowing argon atmosphere  Journal Articles
• Kinetic study of droplet swelling in BOF steelmaking  Journal Articles
• Kinetics and Mechanism of Decarburization and Melting of Direct-Reduced Iron Pellets in Slag  Journal Articles
• Kinetics and Mechanism of Hydrogen Reduction of Lead-Silicate Slag  Journal Articles
• Kinetics and Mechanisms of Reactions in Iron Ore/Coal Composites.  Journal Articles
• Kinetics and mechanism of the formation of dense mgo layer in pitch-bearing magnesite brick during service  Journal Articles
• Kinetics in multicomponent metallic-ionic systems  Journal Articles
• Kinetics of CO-CO2 reaction with CaO-SiO2-FeOx melts  Journal Articles
• Kinetics of Decarburization and Manganese Loss from Fe–15Mn–1C Alloy by Bubbling of Argon–Oxygen Gas Mixtures  Journal Articles
• Kinetics of Electrically Enhanced Boron Removal From Silicon Using CaO-SiO2 and CaO-SiO2-Al2O3 Slag  Journal Articles
• Kinetics of Flux Dissolution in Oxygen Steelmaking  Journal Articles
• Kinetics of Na2O and B2O3 Loss From CaO-SiO2-Al2O3 Slags  Journal Articles
• Kinetics of Reduction of Low-Grade Nickel Laterite Ore Using Carbon Monoxide  Journal Articles
• Kinetics of Scrap Melting in Liquid Steel: Multipiece Scrap Melting  Journal Articles
• Kinetics of Silicothermic Reduction of Manganese Oxide for Advanced High-Strength Steel Production  Journal Articles
• Kinetics of chlorination of Co and Co-10 At. Pct Pt alloy by reaction with HCI gas  Journal Articles
• Kinetics of iron ore reduction in a fluidized bed with intermittent gas flow  Journal Articles
• Kinetics of metal/slag reactions during spontaneous emulsification  Journal Articles
• Kinetics of scrap melting in liquid steel  Journal Articles
• Kinetics of the Carbothermic Reduction of Manganese Oxide from Slag  Journal Articles
• Kinetics of the Reaction of CO2/CO Gas Mixtures with Iron Oxide  Journal Articles
• Kinetics of the reactions between silica and alumino-silicate refractories and molten iron  Journal Articles
• Ladle Eye Area Measurement using Multivariate Image Analysis  Journal Articles
• Ladle eye detection using multivariate image analysis  Journal Articles
• Laminage contrôlé des produits plats en acier ferritique aciculaire  Journal Articles
• Lead Recovery From PbO Using Hydrogen as a Reducing Agent  Journal Articles
• Letter from incoming Editor-in-Chief  Journal Articles
• Liquid Mixing in Thick-Slag-Covered Metallurgical Baths—Blending of Bath  Journal Articles
• MECHANICAL-BEHAVIOR AND FRACTURE OF SOME HSLA STEELS .2. A DISCUSSION OF MODES OF FRACTURE OBSERVED DURING FORMING OF HSLA STEELS  Journal Articles
• MECHANISMS OF REDUCTION OF IRON ORE/COAL AGGLOMERATES AND SCIENTIFIC ISSUES IN RHF OPERATIONS  Journal Articles
• MICROSTRUCTURE AND FORMABILITY  Conferences
• MODELING OF CALCIUM CARBIDE DESULFURIZATION OF IRON  Conferences
• MULTIVARIATE STATISTICAL-ANALYSIS OF MINERAL PROCESSING PLANT-DATA  Journal Articles
• Mass and energy analysis of composite pellet process  Journal Articles
• Materials Transfer in Electro-Spark Deposition of TiCp/Ni Metal-Matrix Composite Coating on Cu Substrate  Journal Articles
• Mathematical Modeling of Impinging Gas Jets on Liquid Surfaces  Journal Articles
• Mathematical Modeling of the Kinetics of Carbothermic Reduction of Iron Oxides in Ore-Coal Composite Pellets  Journal Articles
• Mathematical Modelling of Reactions in Iron Ore/Coal Composites.  Journal Articles
• Mathematical Modelling of Reversed Flow and Heat Transfer in the Combustion Chamber of the LB Furnace.  Journal Articles
• Mathematical Study of the Formation Mechanisms of Complex Oxide Inclusions in Si–Mn-Killed Steel  Journal Articles
• Mathematical and Physical Modelling of Fluid Flow and Heat Transfer in Electric Smelting  Journal Articles
• Mathematical and physical modelling of fluid flow and heat transfer in electric smelting  Conferences
• Mathematical modeling of postcombustion in a KOBM converter  Journal Articles
• Measurement and modeling of turbulence in the gas/liquid two-phase zone during gas injection  Journal Articles
• Measurements of the internal structure of gas-liquid plumes  Journal Articles
• Mechanical Properties of Mg-Gd and Mg-Y Solid Solutions  Conferences
• Mechanical Properties of Particulate MMC/AISI 304 Friction Joints.  Journal Articles
• Mechanical behaviour of multiphase materials : an intermediate mixture law without fitting parameter  Conferences
• Mechanical properties and failure behavior of resistance spot welded medium-Mn steel under static and quasi-static shear-tension loading  Journal Articles
• Mechanics of partially saturated soils  Journal Articles
• Mechanism of ZrB2 Formation in Molten Al-V-Zr Alloy During Boron Treatment  Journal Articles
• Metallurgical and Materials Transactions B  Journal
• Metallurgical and Mechanical Properties of Fusion Zones of TRIP Steels in Laser Welding  Journal Articles
• Microstructural Design of Multiphase Advanced High Strength Steels  Journal Articles
• Microstructural Design of Multiphase Advanced High Strength Steels  Journal Articles
• Microstructural characteristics and mechanical properties of fiber laser welded-brazed Mg alloy-stainless steel joint  Journal Articles
• Microstructure and Shear Strength of Novel Aluminum to Steel Resistance Spot Welds  Journal Articles
• Microstructure and properties of laser brazed magnesium to coated steel  Journal Articles
• Microstructure and properties of not-fully recrystallized IF steels  Journal Articles
• Microstructure, hardness and tensile properties of fusion zone in laser welding of advanced high strength steels  Journal Articles
• Mineral Processing and Extractive Metallurgy Review  Journal
• Mineral Processing and Metal Extraction on the Lunar Surface - Challenges and Opportunities  Journal Articles
• Minerals Engineering  Journal
• Model of Inclusion Evolution During Calcium Treatment in the Ladle Furnace  Journal Articles
• Model studies on slag metal entrainment in gas-stirred ladles  Conferences
• Modeling Study of Steel–Slag–Inclusion Reactions During the Refining of Si–Mn Killed Steel  Journal Articles
• Modeling of Droplet Generation in a Top Blowing Steelmaking Process  Conferences
• Modeling of Slag Entrainment and Interfacial Mass Transfer in Gas Stirred Ladles  Journal Articles
• Modeling of gas-liquid reactions in ladle metallurgy: Part I. Physical modeling  Journal Articles
• Modeling of gas-liquid reactions in ladle metallurgy: Part II. Numerical simulation  Journal Articles
• Modeling of scrap melting in the heel of an EAF  Journal Articles
• Modeling of slag eye formation over a metal bath due to gas bubbling  Journal Articles
• Modeling of trajectory and residence time of metal droplets in slag-metal-gas emulsions in oxygen steelmaking  Journal Articles
• Modeling the Impact of Varying Levels of Inclusion Adhesion on Deposition in a Pilot-Scale Nozzle  Journal Articles
• Modelling of concrete response to fluctuating load  Journal Articles
• Modelling of sand behaviour under earthquake excitation  Journal Articles
• Modelling of the mechanical properties of austenitic stainless steel coils processed on the Ugine&ALZ integrated cold rolling line LC2i  Conferences
• Monitoring of Dynamic Mechanical Parameters in Resistance Spot Welding of Aluminium  Journal Articles
• Monitoring of less-common residual elements in scrap feeds for EAF steelmaking  Journal Articles
• Monte carlo simulation of clustering of alumina particles in turbulent liquid aluminum  Journal Articles
• Morphology and distribution of martensite in 301L alloy induced by different subsequent processes after prior deformation  Journal Articles
• Multivariate Analysis of Ladle Vibration  Journal Articles
• NOVEL THERMAL PROCESSING OF DUAL PHASE STEELS: I – MICROSTRUCTURAL DESIGN  Journal Articles
• NOVEL THERMAL PROCESSING OF DUAL PHASE STEELS: I – MICROSTRUCTURAL DESIGN  Journal Articles
• NOx Prediction of Supersonic Coherent Jets for Electric Arc Steelmaking Furnace  Journal Articles
• Near-roll dross particle interactions in a galvanizing bath  Journal Articles
• Neural-Net–Based Predictive Modeling of Spout Eye Size in Steelmaking  Journal Articles
• New Horizons in Iron and Steel-making in Japan  Journal Articles
• New trends in directional coarsening of superalloys under stress  Journal Articles
• Nickel Extraction from Nickel Sulfide Concentrates by Iron Addition: Ferronickel Formation Mechanism  Journal Articles
• Nonintrusive Monitoring and Control of Metallurgical Processes by Acoustic Measurements  Journal Articles
• Nouvelle étude du système niobium-columbium  Journal Articles
• Novel Thermal Processing of Dual Phase Steels: II – Work Hardening and Fracture Mechanisms  Journal Articles
• Novel multi-stage aluminium production: part 2 – experimental investigation on carbosulphidation of Al₂O₃ using H₂S and sodiothermic reduction of Al₂S₃  Journal Articles
• Nugget formation and growth during resistance spot welding of aluminium alloy 5182  Journal Articles
• Numerical analysis of elastic-plastic compression of pillars accounting for material hardening and softening  Journal Articles
• Numerical simulation of froth formation in aerated slurry coupled with population balance modelling  Journal Articles
• OBSERVATIONS OF WHISKER GROWTH DURING IRON ORE REDUCTION.  Journal Articles
• ON A SHAPE-PRESERVING THERMODYNAMIC OPTIMIZATION  Conferences
• ON THE MECHANISM OF ABNORMAL SWELLING DURING THE REDUCTION OF IRON ORE PELLETS.  Journal Articles
• On a number of inflection points of activity curves for a regular solution  Journal Articles
• On growth and form a metallurgical viewpoint  Journal Articles
• On quantification of equivalent permeability tensor in sparsely fractured rock masses  Journal Articles
• On the Coupling Between Solute Drag and Recrystallization Kinetics  Journal Articles
• On the Development of a Metallographic Method to Determine the Strain of Ferrite Phase in a HSLA Steel  Journal Articles
• On the description of localized deformation  Journal Articles
• On the kinetics of coupled sulfur and oxygen transfer through an ionic diaphragm  Journal Articles
• On the mechanical anisotropy of argillaceous Cobourg limestone: fabric tensor approach  Journal Articles
• On the mechanical response of saturated cemented materials — part I: theoretical considerations  Journal Articles
• On the mechanical response of saturated cemented materials — part II: experimental investigation and numerical simulations  Journal Articles
• On the practicality of Clausius’ maxim  Journal Articles
• Online Analysis of Stirring Processes in Ladle Metallurgy  Journal Articles
• Online Monitoring of Dynamic Slag Behavior in Ladle Metallurgy  Journal Articles
• Optimizing chemical energy into Electric Arc Furnaces  Journal Articles
• Optimum Treatment Time for Solid-State Extraction of Nickel from Nickel Sulfide Concentrates at 1073 K  Journal Articles
• PERFORMANCE EVALUATION OF A CARBON-IN-PULP PLANT BY DYNAMIC SIMULATION  Journal Articles
• Parametric Study of Automated Electrospark Deposition for Ni-Based Superalloys  Journal Articles
• Particle sedimentation during processing of liquid metal-matrix composites  Journal Articles
• Physical Modelling of Thermal Stratification, Bottom Build-Up and Mixing in Submerged ARC Electric Smelting  Journal Articles
• Physical and mathematical modeling of bottom stirring and gas evolution in electric arc furnaces  Journal Articles
• Pilling–Bedworth Ratio for Homogeneous Alloys: A Physically Sound Practical Generalization  Journal Articles
• Pore pressure development in moving boundary problems. Technical note  Journal Articles
• Porosity Prediction in A356 Wheel Casting  Journal Articles
• Pounding of buildings during earthquakes: a Canadian perspective  Journal Articles
• Predicting Transient Softening in the Sub-Critical Heat-Affected Zone of Dual-Phase and Martensitic Steel Welds  Journal Articles
• Predicting liquid metal embrittlement severity in resistance spot welding using hot tensile testing data  Journal Articles
• Prediction of Strain Distribution in Aluminum Tailor Welded Blanks for Different Welding Techniques  Journal Articles
• Premelting, Melting, and Degradation Properties of Molten Alkali Nitrates: LiNO3, NaNO3, KNO3, and Binary NaNO3-KNO3  Journal Articles
• Preparation of High Nickel Grade Ferronickel From Nickel Sulfide Concentrate with Minimal Sulfur Dioxide Emission  Journal Articles
• Process modelling for the production of hydrogen-based direct reduced iron in shaft furnaces using different ore grades  Journal Articles
• Progress in Slag Foaming in Metallurgical Processes  Journal Articles
• Properties of a powder metallurgy low-alloy steel with varying fractions of large iron particles  Journal Articles
• Quantifying the link between crack distribution and resistance spot weld strength reduction in liquid metal embrittlement susceptible steels  Journal Articles
• REACTION BONDED SILICON-CARBIDE INCONEL 600 JOINING  Conferences
• REDUCTION PHENOMENA IN COMPOSITES OF IRON-ORE CONCENTRATES AND COALS  Journal Articles
• RELIABILITY OF STRUCTURAL CERAMICS IN SERVICE AT ELEVATED-TEMPERATURES  Conferences
• RESIDENCE TIME OF METAL DROPLETS IN SLAG-METAL-GAS EMULSIONS THROUGH TOP GAS BLOWING  Journal Articles
• RESIDENCE TIME OF METAL DROPLETS IN SLAG-METAL-GAS EMULSIONS THROUGH TOP GAS BLOWING  Journal Articles
• ROLE OF MIXING IN POWDER INJECTION DESULFURIZATION PROCESSES  Journal Articles
• Radiation Damage Effects in Solid Wastes  Journal Articles
• Radiation modeling in an EAF  Journal Articles
• Radiation protection in the world of modern radiobiology: Time for a new approach  Journal Articles
• Radium in uranium mill tailings - Some observations on retention and removal  Journal Articles
• Rapid image analysis of ladle eye area using threshold technique  Journal Articles
• Recent Advances in the Fluid Dynamics of Ladle Metallurgy  Journal Articles
• Recent Developments in the Environment Process  Journal Articles
• Recent advances in blast furnace ironmaking in North America.  Journal Articles
• Recent developments in the environment process  Journal Articles
• Recrystallization Behavior Design for Controlling Grain Size in Strip Rolling Process  Journal Articles
• Reduction behaviour of rice husk ash for preparation of high purity silicon  Journal Articles
• Reduction in liquid metal embrittlement cracking using weld current ramping  Journal Articles
• Refining fluxes for metallurgical melts based on waste materials of the aluminium industry  Journal Articles
• Relations microstructure-endommagement-rupture dans deux types d’alliages polyphasés : Al-Zn-Mg et austénoferritiques.  Journal Articles
• Relationship between Electronic Conductivity of Iron Oxide–Containing Slags and Reaction Kinetics with CO-CO2  Journal Articles
• Relationship between Microstructure, Mechanical Properties and Damage Mechanisms in High Martensite Fraction Dual Phase Steels  Journal Articles
• Removal of Boron and Phosphorus from Silicon Using CaO-SiO2-Na2O-Al2O3 Flux  Conferences
• Removal of Boron from Silicon by Solvent Refining Using Ferrosilicon Alloys  Journal Articles
• Removal of Vanadium from Molten Aluminum-Part I. Analysis of VB2 Formation  Journal Articles
• Removal of Vanadium from Molten Aluminum—Part II. Kinetic Analysis and Mechanism of VB2 Formation  Journal Articles
• Removal of Vanadium from Molten Aluminum—Part III. Analysis of Industrial Boron Treatment Practice  Journal Articles
• Removal of iron from recycled aluminium alloys  Journal Articles
• Repairing of exit-hole in friction-stir-spot welded joints for 2024-T4 aluminum alloy by resistance welding  Journal Articles
• Revista Escola de Minas  Journal
• Revue de Metallurgie. Cahiers D'Informations Techniques  Journal
• Role of Grain Refinement in the Hot Tearing of Cast Al-Cu Alloy  Journal Articles
• Role of Heat Transfer in Early Stage Decarburization of DRI in Slag  Journal Articles
• Role of Nb in 13Cr super-martensitic stainless steel  Journal Articles
• SEAISI Quarterly Journal  Journal
• SLAG LINE DISSOLUTION OF MgO REFRACTORY  Journal Articles
• STEELMAKING SLAG UTILIZATION IN CANADIAN HIGHWAY CONSTRUCTION  Journal Articles
• STUDY OF BAUSCHINGER EFFECT IN SOME HSLA STEELS  Conferences
• SUB-MICRON PARTICLE-SIZE DISTRIBUTION DETERMINATION USING LIGHT-SCATTERING AND PARTICLE CHROMATOGRAPHY - EVALUATION OF THE TECHNIQUES AND THEIR APPLICATION TO ONLINE MEASUREMENTS  Conferences
• SUPPRESSION AND REVIVAL OF SWELLING OF IRON ORE PELLETS DURING REDUCTION.  Journal Articles
• SURFACE-TREATMENT AND SURFACE-ANALYSIS  Conferences
• Sampling Strategy of Bubble Characteristics in a 1:2 Scale Curved Continuous Casting Mold: Parametric and Prediction Study  Journal Articles
• Scandinavian Journal of Metallurgy  Journal
• Second pulse current in resistance spot welded TRIP Steel - Effects on the microstructure and mechanical behavior  Journal Articles
• Seismic shear demand of ductile cantilever walls: a Canadian code perspective  Journal Articles
• Settling and clustering of silicon carbide particles in aluminum metal matrix composites  Journal Articles
• Settling of multisized clusters of alumina particles in liquid aluminum  Journal Articles
• Severe plastic deformation by the cone-cone method: potential for producing ultrafine grained sheet material  Journal Articles
• Simulation of Ladle Refining Reactions in Si–Mn‐Killed Steel  Journal Articles
• Simulation of Slag Freeze Layer Formation: Part I. Experimental Study  Journal Articles
• Simulation of Slag Freeze Layer Formation: Part II: Numerical Model  Journal Articles
• Simulation of quantitative fault diagnosis in backfill hydrocyclones  Journal Articles
• Simultaneous reduction and carburization of ilmenite  Journal Articles
• Sintering mechanisms and mechanical properties of joints bonded using silver nanoparticles for electronic packaging applications  Journal Articles
• Site effects on the seismic response of a suspension bridge  Journal Articles
• Slag Electrical Conductivity and Its Effect on Mass Transport and Interfacial Reaction Kinetics  Journal Articles
• Smelting Reduction and Direct Reduction for Alternative Ironmaking  Conferences
• Solid-solution formation between arsenic and antimony oxides  Journal Articles
• Solidification of industrial mold fluxes  Journal Articles
• Solidification of particle-reinforced metal-matrix composites  Journal Articles
• Solvent refining of silicon using nickel as impurity getter  Journal Articles
• Some Fundamental and Computational Aspects of Paraequilibrium  Journal Articles
• Some aspects of the fracture behaviour of high strength, low alloy steels  Journal Articles
• Splash Distribution in Oxygen Steelmaking  Journal Articles
• Splashing in Oxygen Steelmaking  Journal Articles
• Spot Weld Strength Modeling and Processing Maps for Hot-Stamping Steels  Journal Articles
• Spout Eyes Area Correlation in Ladle Metallurgy  Journal Articles
• Stahl und Eisen  Journal
• Steel Research  Journal
• Steel Research International  Journal
• Steel ladle sidewall buildup  Journal Articles
• Stoichiometric constraint and calculability of chemical potential  Journal Articles
• Strategies for nitrogen control during the production of interstitial-free steel  Journal Articles
• Stress–Strain Predictions of Semisolid Al-Mg-Mn Alloys During Direct Chill Casting: Effects of Microstructure and Process Variables  Journal Articles
• Study of Dispersed Micro-bubbles and Improved Inclusion Removal in Ruhrstahl–Heraeus (RH) Refining With Argon Injection Through Down Leg  Journal Articles
• Study of Lattice Strain Evolution in Stainless Steel Under Tension: The Role of Self‐Consistent Plasticity Model  Conferences
• Study of Low Flow Rate Ladle Bottom Gas Stirring Using Triaxial Vibration Signals  Journal Articles
• Study of cavity modes in BOF by analysis of sound  Journal Articles
• Study of processing, microstructure and mechanical properties of hot rolled ultra-high strength steel  Journal Articles
• Study of the effect of cold deformation on the austenite formation  Journal Articles
• Substituting natural gas with hydrogen: A case study on mass, energy, and emissions in electric arc furnace steelmaking  Journal Articles
• Sulfate Formation and Decomposition of Nickel Concentrates  Journal Articles
• Surface tension measurements on pure liquid iron and nickel by an oscillating drop technique  Journal Articles
• Surface tension of pure liquid and supercooled iron  Journal Articles
• TGA kinetic study on the hydrogen reduction of an iron nickel oxide  Conferences
• THE EFFECT OF INTERSTITIAL CONTENT ON THE EVOLUTION OF PRECIPITATES AND THE PROCESSING OF TITANIUM-NIOBIUM-BEARING HSLA STEEL SLABS  Conferences
• THE EFFECTS OF PRESSURE ON FRACTURE OF COMPOSITE-MATERIALS  Conferences
• THE FORMATION AND INFLUENCE OF THE SLAG PHASE DURING THE REDUCTION OF SOME COMMERCIAL IRON-ORE PELLETS  Conferences
• THE JOINING OF NICKEL-BASED SUPERALLOYS TO SILICON-CARBIDE CERAMICS  Conferences
• THE MACHINABILITY AND SUSCEPTIBILITY TO STRESS-CORROSION OF QUENCHED AND TEMPERED COUPLING STOCK  Conferences
• THE ROLE OF BASIC ADDITIVES IN IRON-OXIDE PELLETS DURING THERMAL INDURATION AND REDUCTION  Conferences
• THE ROLE OF CENTER-LINE SEGREGATION AND BANDED TRANSFORMATION PRODUCTS ON FRACTURE PROCESSES IN HSLA STEELS  Conferences
• THE ROLE OF MAGNESIA IN IRON-ORE PELLETS  Journal Articles
• Tensile failure criterion for transversely isotropic rocks  Journal Articles
• Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan  Journal
• The Bainite Transformation Stage in the Processing of Trip-Aided Sheet Steels  Journal Articles
• The Binary Alkali Nitrate and Chloride Phase Diagrams: NaNO3-KNO3, LiNO3-NaNO3, LiNO3-KNO3, and NaCl-KCl  Journal Articles
• The Development of a Processing Window for the Continuous Galvanizing of a Mn–Cr–Si Martensitic Steel  Journal Articles
• The Dynamic Interfacial Oxygen Potential Between Iron-Carbon Droplets and Oxidizing Slag  Journal Articles
• The Effect of Calcium Carbide Particle Size Distribution on the Kinetics of Hot Metal Desulphurization.  Journal Articles
• The Effect of Sulfur Concentration in the Metal on the Mass Transfer of Phosphorus in Bloated Metal Droplets  Journal Articles
• The Effect of Thermal Diffusion on Decarburization Kinetics  Journal Articles
• The Evolution of Ironmaking Process Based on Coal-Containing Iron Ore Agglomerates.  Journal Articles
• The Influence of Lance Orientation and Gas Evolution on Particle-Liquid Contact During Submerged Powder Injection  Journal Articles
• The Influence of Pressure on Fracture of a Ti-V Plate Steel  Journal Articles
• The Influence of Rolling Practice on Fracture Properties of Hot Rolled Plate  Journal Articles
• The Influence of Sulfur on Dephosphorization Kinetics Between Bloated Metal Droplets and Slag Containing FeO  Journal Articles
• The Influence of calcia and magnesia in wustite on the kinetics of metallization and iron whisker formation  Journal Articles
• The Kinetics of Antimony Removal from Copper by Soda Injection  Journal Articles
• The Kinetics of Gasification of Alkalis From the Gangue in Iron Ores by Calcium Chloride  Journal Articles
• The Production of Rare Earth based Magnesium and Aluminium Alloys – A Review  Journal Articles
• The Reaction Behavior of Direct Reduced Iron (DRI) in Steelmaking Slags: Effect of DRI Carbon and Preheating Temperature  Journal Articles
• The Role of an Interfacial Product Layer in Magnesium Desulphurization of Molten Iron  Journal Articles
• The Shape and Movement of Hearth in the Furnace for a New Ironmaking Process  Journal Articles
• The Strength after Partial Reduction of Commercial Iron Ore Pellets  Journal Articles
• The Tensile Properties of a Particulate Reinforced Al Alloy in the Temperature Range −196–300°C  Journal Articles
• The attack of alumina-containing steelmaking slags on magnesite brick  Journal Articles
• The behavior of manganese in oxygen steelmaking  Journal Articles
• The breakup of bubbles into jets during submerged gas injection  Journal Articles
• The development of a new Fe-Mn-C austenitic steel for automotive applications  Journal Articles
• The impact of bubble dynamics on the flow in plumes of ladle water models  Journal Articles
• The impact of the environmental concerns on the development of ironmaking technology  Journal Articles
• The influence of warm rolling on the fracture toughness of bainitic steels  Journal Articles
• The kinetics of dephosphorization of carbon-saturated iron using an oxidizing slag  Journal Articles
• The kinetics of magnesium vapour dissolution into pig iron  Journal Articles
• The kinetics of molten iron desulfurization using magnesium vapor  Journal Articles
• The kinetics of selenium removal from molten copper by powder injection  Journal Articles
• The kinetics of the reactions between silica and alumino-silicate refractories and carbon-saturated iron  Journal Articles
• The measurement and prediction of the vaporization of magnesium from an inductively stirred melt  Journal Articles
• The occurrence of delamination in a control rolled HSLA steel  Journal Articles
• The occurrence of delamination in a control rolled HSLA steel  Journal Articles
• The penetration of oxygen lance jets in foaming slags  Journal Articles
• The performance and charge behaviour in melter/smelter for the production of hot metal in hydrogen DRI-based steelmaking  Journal Articles
• The reducing-complexing treatment for the leaching of radium from uranium mill tailings  Journal Articles
• The search for an economical and environmentally friendly ironmaking process  Journal Articles
• The structure and properties of warm-rolled steels  Journal Articles
• The tensile properties of a particulate reinforced Al alloy in the temperature range - 196-300°C  Journal Articles
• The transformation of slip dislocations during twinning of copper-aluminum alloy crystals  Journal Articles
• The use of immobilised biomass to remove and recover radium from Elliot Lake uranium tailing streams  Journal Articles
• The use of secondary ion mass spectrometry for investigating oxygen in pyrometallurgical reactions  Journal Articles
• Theoretical Investigation of the Inclined Sidewall Design on Magnetohydrodynamic (MHD) Forces in an Aluminum Electrolytic Cell  Journal Articles
• Thermal Upgrading of Nickeliferous Pyrrhotite Tailings for the Recovery of Nickel in the Form of Ferronickel Alloy  Journal Articles
• Thermal diffusion in kinetic and equilibrium measurements by levitation technique  Journal Articles
• Thermal separation of arsenic and antimony oxides  Journal Articles
• Thermal upgrading of nickeliferous pyrrhotite tailings: Formation mechanism of ferronickel alloy  Journal Articles
• Thermodynamic and Kinetic Aspects of Sulfur Evaporation from Fe–C Alloy Droplets  Journal Articles
• Thermodynamic assessment of arsenic in iron and nickel alloys  Journal Articles
• Thermodynamics Behavior of Germanium During Equilibrium Reactions between FeOx-CaO-SiO2-MgO Slag and Molten Copper  Journal Articles
• Thermodynamics and kinetics analyses of ZrB₂formation in molten aluminium alloys  Journal Articles
• Thermodynamics of Gallium (Ga) at Black Copper Smelting Conditions Relevant to E-Waste Processing  Journal Articles
• Thermodynamics of Palladium (Pd) and Tantalum (Ta) Relevant to Secondary Copper Smelting  Journal Articles
• Thermodynamics of Phosphorus in Solvent Refining of Silicon Using Ferrosilicon Alloys  Journal Articles
• Tin solubility in CaO‐bearing slags  Journal Articles
• Toward a New Interpretation of the Mechanical Behaviour of As-quenched Low Alloyed Martensitic Steels  Journal Articles
• Toward integrated ladle metallurgy control  Journal Articles
• Towards nanoparticle flotation collectors for pentlandite separation  Journal Articles
• Tracking Inclusions during Ladle Refining Using a Kinetic Model for the Compositions of Metal, Slag, and Inclusions  Journal Articles
• Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy  Journal
• Transient Kinetics of Slag Metal Reactions  Conferences
• Transport phenomena in electric smelting of nickel matte: Part I. Electric potential distribution  Journal Articles
• Transport phenomena in electric smelting of nickel matte: Part II. Mathematical modeling  Journal Articles
• Treatment of Steel with Alkaline-earth Elements.  Journal Articles
• Tunnel lining strategies  Journal Articles
• USE OF SPONGE IRON IN IRONMAKING  Journal Articles
• Un rapport indispensable de l’Académie des sciences et de l’Académie des technologies sur « La Métallurgie, Science et Ingénierie »  Journal Articles
• Undrained response of granular soil involving localized deformation  Journal Articles
• Unusual reference states for chemical potentials  Journal Articles
• Use of the Cone Expansion Test to Assess the Potential for Longitudinal Seam Failure in Extruded AZ31 and AM30 Mg Alloy Tubes  Journal Articles
• Using a Welding Robot for Small-Batch Production  Journal Articles
• Using the RHF/SRV or RHF/EAF to produce liquid iron at a low coal rate  Journal Articles
• Vanadium Precipitation During Intercritical Annealing in Cold Rolled TRIP Steels  Journal Articles
• Watching the Current Trend of the Pure Metals in the Market  Journal Articles
• Welding Journal  Journal
• Welding aluminum sheet using a high-power diode laser  Journal Articles
• Welding in the World, Le Soudage Dans Le Monde  Journal
• ZINC SOLUBILITY MEASUREMENTS AND THERMODYNAMIC EVALUATION OF Zn-Pb-Bi TERNARY SYSTEM  Journal Articles
• ZINC SOLUBILITY MEASUREMENTS AND THERMODYNAMIC EVALUATION OF Zn-Pb-Bi TERNARY SYSTEM  Journal Articles
• Zinc-Induced Liquid Metal Embrittlement in Austenitic Microstructures  Journal Articles
• steel research int. 11/2012  Journal Articles
• ▲ Inclusion engineering of steels for high speed machining  Journal Articles