publication venue for
- Comparison of Damage Evolution in Different Steels by Means of 3D X Ray Tomography 2015
- Study of Lattice Strain Evolution in Stainless Steel Under Tension: The Role of Self‐Consistent Plasticity Model 2015
- An Analysis of Recirculatory Flow in Gas‐Stirred Ladles 2010
- Effect of Nb on Ferrite Recrystallization and Austenite Decomposition in Microalloyed Steels 2007
- Continuous Casting Tundish Dead Volume Study by Physical Modeling and Computational Investigation. 95. 2024
- Simulation of Ladle Refining Reactions in Si–Mn‐Killed Steel. 95. 2024
- Modeling the Impact of Varying Levels of Inclusion Adhesion on Deposition in a Pilot-Scale Nozzle 2024
- Slag Electrical Conductivity and Its Effect on Mass Transport and Interfacial Reaction Kinetics 2024
- Austenite Nucleation and Growth as a Function of Starting Microstructure for a Fe–0.15C–5.56Mn–1.1Si–1.89Al Medium‐Mn Steel. 94. 2023
- Continuous Hot‐Dip Galvanizing of Medium‐Manganese Third‐Generation Advanced High‐Strength Steels. 94. 2023
- Corrugation Reinforced Architectured Materials by Direct Laser Hardening: A Study of Geometrically Induced Work Hardening in Steel. 94. 2023
- Modeling Study of Steel–Slag–Inclusion Reactions During the Refining of Si–Mn Killed Steel. 93. 2022
- Argon–Oxygen Decarburization of High‐Manganese Steels: Effect of Alloy Composition. 92. 2021
- Tracking Inclusions during Ladle Refining Using a Kinetic Model for the Compositions of Metal, Slag, and Inclusions. 90. 2019
- Application of Optical Floating Zone Method to Dissolution Kinetics of Inclusions in a Steelmaking Slag. 90. 2019
- The Effect of Sulfur Concentration in the Metal on the Mass Transfer of Phosphorus in Bloated Metal Droplets. 89. 2018
- Adiabatic Carbon Rate of Alternative Ironmaking Processes to Produce Hot Metal. 85:35-43. 2014
- Driving Force and Logic of Development of Advanced High Strength Steels for Automotive Applications. 84:937-947. 2013
- The Development of a Processing Window for the Continuous Galvanizing of a Mn–Cr–Si Martensitic Steel. 83:1103-1117. 2012
- steel research int. 11/2012. 83. 2012
- Application of Thermodynamic Model for Inclusion Control in Steelmaking to Improve the Machinability of Low Carbon Free Cutting Steels. 75:314-321. 2004