Constitutive model of the TWIP effect in a polycrystalline high manganese content austenitic steel Journal Articles uri icon

  •  
  • Overview
  •  
  • Research
  •  
  • Identity
  •  
  • Additional Document Info
  •  
  • View All
  •  

abstract

  • The TEM study of our steel with a high manganese content reveals that mechanical twining (TWIP effect) occurs during the deformation at room temperature. Microtwins are organised into parallel stacks and two systems are sequentially activated in each grain. They participate to the deformation and they are strong obstacles for the dislocations and for other twins, leading to the decrease of the effective grain size. Thus, TWIP provides our alloy a very good ductility and a high hardening rate.Our constitutive modelling deduced from a model proposed by Bouaziz and Guelton [4] integrates this typical organisation of microtwins. Twinning is quantified in each grain by the partial volume fraction of twins in each system. A nucleation law for the microtwins is introduced which depends on the local stress and the stress relaxation due to pre‐existing twins. The flow stress is deduced from the dislocation density, which evolves with the dynamical recovery and the decrease of the mean free path (MFP). The MFP takes into account the grain and twin boundaries and the forest dislocations. The strain is calculated by adding the contributions of dislocation glide and twinning accounting the orientation of the grain. To treat the polycristal, the behaviours of different grain orientations are mixed by assuming at each strain step that the increment of elastic energy stored is the same in each grain.The model was successfully applied to describe the mechanical properties of our alloy, for two different grain sizes. Some microstructural parameters are yet fitted. This leads to an insufficient prediction of the evolution of the microstructure. In further developments, we expect to introduce numerical simulation results on local characteristics of microtwins (thickness, critical resolved shear stress for twinning) and experimental results on the rate of twin nucleation.

publication date

  • June 2002