Metallurgical and Materials Transactions B
Journal
-
- Overview
-
- Identity
-
- View All
-
Overview
publication venue for
-
Formation of Inclusions in Ti-Stabilized 17Cr Austenitic Stainless Steel
2016
-
Mechanical Properties of Mg-Gd and Mg-Y Solid Solutions
2016
-
Modeling of Droplet Generation in a Top Blowing Steelmaking Process
2016
-
A Multi-scale Thermomechanical-Solidification Model to Simulate the Transient Force Field Deforming an Aluminum 6061 Semisolid Weld
2015
-
Analysis of Microstructural Changes in the Heat-Affected Zone and Fusion Zone of a Fiber Laser Welded DP980 Steel
2015
-
Characterization of Pore Defects and Fatigue Cracks in Die Cast AM60 Using 3D X-ray Computed Tomography
2015
-
Development of an Optimization Methodology for the Aluminum Alloy Wheel Casting Process
2015
-
Removal of Boron and Phosphorus from Silicon Using CaO-SiO2-Na2O-Al2O3 Flux
2014
-
Transient Kinetics of Slag Metal Reactions
2009
-
Extraction of Nickel from Ultramafic Nickel Sulfide Concentrate by Metallic Iron Addition.
55.
2024
-
NOx Prediction of Supersonic Coherent Jets for Electric Arc Steelmaking Furnace.
55.
2024
-
Kinetics and Mechanism of Hydrogen Reduction of Lead-Silicate Slag.
54:3060-3077.
2023
-
Preparation of High Nickel Grade Ferronickel From Nickel Sulfide Concentrate with Minimal Sulfur Dioxide Emission.
54:2758-2770.
2023
-
Study of Dispersed Micro-bubbles and Improved Inclusion Removal in Ruhrstahl–Heraeus (RH) Refining With Argon Injection Through Down Leg.
54:2347-2359.
2023
-
Development of a Multi-oxide Kinetic Model to Study Inclusion Transient Evolution in Molten Steel: Application to Si–Mn Killed Steel.
54:2244-2257.
2023
-
Kinetics of Electrically Enhanced Boron Removal From Silicon Using CaO-SiO2 and CaO-SiO2-Al2O3 Slag.
54:1228-1244.
2023
-
Lead Recovery From PbO Using Hydrogen as a Reducing Agent.
54:996-1016.
2023
-
Pilling–Bedworth Ratio for Homogeneous Alloys: A Physically Sound Practical Generalization.
54:1174-1180.
2023
-
Consideration of the Competitive Adsorption of Oxygen and Sulfur on the Decarburization Kinetics of Fe–C Droplets in Oxidizing Slag.
53:4087-4104.
2022
-
Mathematical Study of the Formation Mechanisms of Complex Oxide Inclusions in Si–Mn-Killed Steel.
53:3690-3706.
2022
-
Thermodynamics of Gallium (Ga) at Black Copper Smelting Conditions Relevant to E-Waste Processing.
53:3136-3146.
2022
-
Decarburization of Iron Carbon Droplets with Oxidizing Slag: An Experimental Study to Understand the Effect of Ionic and Electronic Conductivity on Decarburization Kinetics.
53:770-785.
2022
-
Effect of Annealing Atmosphere and Steel Alloy Composition on Oxide Formation and Radiative Properties of Advanced High-Strength Steel Strip.
53:380-393.
2022
-
Effect of Build-ups on Ladle Wall on Acoustic Signals in Gas-Stirred Ladles.
53:41-49.
2022
-
Investigation of the Influence of Slag Basicity on Metal Droplet Dephosphorization.
53:136-151.
2022
-
A Decarburization Model for a Fe–C Droplet Reacting in Oxidizing Slag.
52:3888-3906.
2021
-
A Mathematical Model for Air Atomization of Molten Slag Based on Integral Conservation Equations.
52:4197-4205.
2021
-
Decarburization of Bloated Droplets: An Experimental Study to Understand the Kinetics of Decarburization of Metallic Iron Droplets in FeO Containing CaO-SiO2 Slags.
52:4215-4229.
2021
-
Droplet Heat Transfer in Oxygen Steelmaking.
52:4141-4156.
2021
-
Nickel Extraction from Nickel Sulfide Concentrates by Iron Addition: Ferronickel Formation Mechanism.
52:3920-3929.
2021
-
Ferronickel Generation from Nickel Sulfide Concentrates by Metallic Iron Addition: Optimization of the Nickel Extraction Process.
52:3120-3129.
2021
-
Argon-Oxygen Decarburization of High Manganese Steels: Effect of Temperature, Alloy Composition, and Submergence Depth.
52:2509-2525.
2021
-
Kinetics of Decarburization and Manganese Loss from Fe–15Mn–1C Alloy by Bubbling of Argon–Oxygen Gas Mixtures.
52:2375-2385.
2021
-
Optimum Treatment Time for Solid-State Extraction of Nickel from Nickel Sulfide Concentrates at 1073 K.
51:2642-2652.
2020
-
Crystallization Behaviors of Spinel During Cooling Process of Modified EAF Slag.
51:1027-1038.
2020
-
Dissolution Behavior of Aluminum Titanate Inclusions in Steelmaking Slags.
51:570-580.
2020
-
Experimental and Numerical Study of Coating Thickness Using Multi-slot Air Knives.
50:2523-2535.
2019
-
Kinetics of the Carbothermic Reduction of Manganese Oxide from Slag.
50:2733-2746.
2019
-
Porosity Prediction in A356 Wheel Casting.
50:2421-2435.
2019
-
Thermal Upgrading of Nickeliferous Pyrrhotite Tailings for the Recovery of Nickel in the Form of Ferronickel Alloy.
50:2186-2196.
2019
-
Diffusion and Flow of CO2 in Carbon Anode for Aluminium Smelting.
50:846-856.
2019
-
Kinetic Modeling of the Silicothermic Reduction of Manganese Oxide from Slag.
50:192-203.
2019
-
Kinetics of Reduction of Low-Grade Nickel Laterite Ore Using Carbon Monoxide.
49:3067-3073.
2018
-
The Binary Alkali Nitrate and Chloride Phase Diagrams: NaNO3-KNO3, LiNO3-NaNO3, LiNO3-KNO3, and NaCl-KCl.
49:3580-3593.
2018
-
A Kinetic Model for Modification of MgAl2O4 Spinel Inclusions During Calcium Treatment in the Ladle Furnace.
49:2744-2756.
2018
-
Dynamic Model of Basic Oxygen Steelmaking Process Based on Multizone Reaction Kinetics: Modeling of Manganese Removal.
49:2191-2208.
2018
-
Dephosphorization of Levitated Silicon-Iron Droplets for Production of Solar-Grade Silicon.
49:1658-1664.
2018
-
In Situ Observation of Calcium Aluminate Inclusions Dissolution into Steelmaking Slag.
49:1612-1623.
2018
-
Model of Inclusion Evolution During Calcium Treatment in the Ladle Furnace.
49:2022-2037.
2018
-
An Assessment of the General Applicability of the Relationship Between Nucleation of CO Bubbles and Mass Transfer of Phosphorus in Liquid Iron Alloys.
49:1119-1135.
2018
-
Dynamic Model of Basic Oxygen Steelmaking Process Based on Multizone Reaction Kinetics: Modeling of Decarburization.
49:1022-1033.
2018
-
Premelting, Melting, and Degradation Properties of Molten Alkali Nitrates: LiNO3, NaNO3, KNO3, and Binary NaNO3-KNO3.
49:1482-1498.
2018
-
Dynamic Model of Basic Oxygen Steelmaking Process Based on Multi-zone Reaction Kinetics: Model Derivation and Validation.
49:537-557.
2018
-
Effect of Slag Composition on the Crystallization Kinetics of Synthetic CaO-SiO2-Al2O3-MgO Slags.
49:590-601.
2018
-
A Multilayer Model for Alumina Inclusion Transformation by Calcium in the Ladle Furnace.
49:375-387.
2018
-
Study of Low Flow Rate Ladle Bottom Gas Stirring Using Triaxial Vibration Signals.
49:423-433.
2018
-
Correction to: Dephosphorization Kinetics between Bloated Metal Droplets and Slag Containing FeO: The Influence of CO Bubbles on the Mass Transfer of Phosphorus in the Metal.
48:3408-3408.
2017
-
Dephosphorization Kinetics between Bloated Metal Droplets and Slag Containing FeO: The Influence of CO Bubbles on the Mass Transfer of Phosphorus in the Metal.
48:2984-3001.
2017
-
Agglomeration of Non-metallic Inclusions at Steel/Ar Interface: In-Situ Observation Experiments and Model Validation.
48:2379-2388.
2017
-
The Dynamic Interfacial Oxygen Potential Between Iron-Carbon Droplets and Oxidizing Slag.
48:2595-2606.
2017
-
The Influence of Sulfur on Dephosphorization Kinetics Between Bloated Metal Droplets and Slag Containing FeO.
48:2343-2353.
2017
-
Agglomeration of Non-metallic Inclusions at the Steel/Ar Interface: Model Application.
48:2092-2103.
2017
-
Kinetics of Silicothermic Reduction of Manganese Oxide for Advanced High-Strength Steel Production.
48:1613-1624.
2017
-
Thermodynamics of Palladium (Pd) and Tantalum (Ta) Relevant to Secondary Copper Smelting.
48:317-327.
2017
-
Thermodynamics of Phosphorus in Solvent Refining of Silicon Using Ferrosilicon Alloys.
48:268-275.
2017
-
Advances in Materials Manufacturing II.
47:3244-3244.
2016
-
Effects of Mold Temperature and Pouring Temperature on the Hot Tearing of Cast Al-Cu Alloys.
47:2979-2990.
2016
-
Thermodynamics Behavior of Germanium During Equilibrium Reactions between FeOx-CaO-SiO2-MgO Slag and Molten Copper.
47:2889-2903.
2016
-
Multivariate Analysis of Ladle Vibration.
47:2681-2689.
2016
-
Graphitization of Coke and Its Interaction with Slag in the Hearth of a Blast Furnace.
47:811-818.
2016
-
Energy Balance Around Gas Injection into Oxygen Steelmaking.
47:458-466.
2016
-
Mechanism of ZrB2 Formation in Molten Al-V-Zr Alloy During Boron Treatment.
47:595-607.
2016
-
Interfaces Between Coke, Slag, and Metal in the Tuyere Level of a Blast Furnace.
46:1104-1111.
2015
-
Removal of Boron from Silicon by Solvent Refining Using Ferrosilicon Alloys.
46:615-620.
2015
-
Splash Distribution in Oxygen Steelmaking.
46:863-872.
2015
-
A Model for Slag Eyes in Steel Refining Ladles Covered with Thick Slag.
46:191-198.
2015
-
Kinetics of Na2O and B2O3 Loss From CaO-SiO2-Al2O3 Slags.
46:74-82.
2015
-
Decarburization of Levitated Fe-Cr-C Droplets by Carbon Dioxide.
45:2211-2221.
2014
-
The Effect of Thermal Diffusion on Decarburization Kinetics.
45:1974-1978.
2014
-
Fluidized Bed Selective Oxidation-Sulfation Roasting of Nickel Sulfide Concentrate: Part I. Oxidation Roasting.
45:653-661.
2014
-
Fluidized Bed Selective Oxidation-Sulfation Roasting of Nickel Sulfide Concentrate: Part II. Sulfation Roasting.
45:662-674.
2014
-
Removal of Vanadium from Molten Aluminum-Part I. Analysis of VB2 Formation.
45:752-768.
2014
-
Removal of Vanadium from Molten Aluminum—Part II. Kinetic Analysis and Mechanism of VB2 Formation.
45:769-783.
2014
-
Removal of Vanadium from Molten Aluminum—Part III. Analysis of Industrial Boron Treatment Practice.
45:784-794.
2014
-
Electrically Enhanced Boron Removal from Silicon Using Slag.
45:1-5.
2014
-
A Critical Review of the Modified Froude Number in Ladle Metallurgy.
44:1486-1498.
2013
-
Investigation of Anodic Gas Film Behavior in Hall–Heroult Cell Using Low Temperature Electrolyte.
44:1155-1165.
2013
-
Stress–Strain Predictions of Semisolid Al-Mg-Mn Alloys During Direct Chill Casting: Effects of Microstructure and Process Variables.
44:1287-1295.
2013
-
Role of Grain Refinement in the Hot Tearing of Cast Al-Cu Alloy.
44:614-623.
2013
-
Erratum to: Progress in Slag Foaming in Metallurgical Processes.
44:478-478.
2013
-
A Study of Scrap Heating By Burners. Part I: Experiments.
44:184-195.
2013
-
A Study of Scrap Heating by Burners: Part II—Numerical Modeling.
44:196-209.
2013
-
Computational Fluid Dynamics (CFD) Investigation of Submerged Combustion Behavior in a Tuyere Blown Slag-fuming Furnace.
43:1054-1068.
2012
-
Progress in Slag Foaming in Metallurgical Processes.
43:751-757.
2012
-
Role of Heat Transfer in Early Stage Decarburization of DRI in Slag.
43:680-685.
2012
-
Neural-Net–Based Predictive Modeling of Spout Eye Size in Steelmaking.
43:571-577.
2012
-
A Water Model Study of Impinging Gas Jets on Liquid Surfaces.
43:302-315.
2012
-
Computational Fluid Dynamic Modeling of Zinc Slag Fuming Process in Top-Submerged Lance Smelting Furnace.
43:39-55.
2012
-
Simulation of Slag Freeze Layer Formation: Part I. Experimental Study.
42:652-663.
2011
-
Simulation of Slag Freeze Layer Formation: Part II: Numerical Model.
42:664-676.
2011
-
Mathematical Modeling of Impinging Gas Jets on Liquid Surfaces.
42:575-591.
2011
-
Nonintrusive Monitoring and Control of Metallurgical Processes by Acoustic Measurements.
42:516-521.
2011
-
Sulfate Formation and Decomposition of Nickel Concentrates.
42:291-299.
2011
-
Theoretical Investigation of the Inclined Sidewall Design on Magnetohydrodynamic (MHD) Forces in an Aluminum Electrolytic Cell.
42:243-253.
2011
-
Computational Fluid Dynamics Modeling of Supersonic Coherent Jets for Electric Arc Furnace Steelmaking Process.
41:1354-1367.
2010
-
Online Analysis of Stirring Processes in Ladle Metallurgy.
41:1025-1032.
2010
-
The Reaction Behavior of Direct Reduced Iron (DRI) in Steelmaking Slags: Effect of DRI Carbon and Preheating Temperature.
41:1018-1024.
2010
-
Kinetics of the Reaction of CO2/CO Gas Mixtures with Iron Oxide.
41:813-823.
2010
-
Computational Fluid Dynamics Simulation of Supersonic Oxygen Jet Behavior at Steelmaking Temperature.
41:636-645.
2010
-
CFD Modeling of Swirl and Nonswirl Gas Injections into Liquid Baths Using Top Submerged Lances.
41:35-50.
2010
-
Liquid Mixing in Thick-Slag-Covered Metallurgical Baths—Blending of Bath.
41:86-93.
2010
-
Formation of Nondendritic Primary Aluminum Phase in Hypoeutectic Alloys in Controlled Diffusion Solidification (CDS): A Hypothesis.
40:843-849.
2009
-
Kinetics and Mechanism of Decarburization and Melting of Direct-Reduced Iron Pellets in Slag.
40:17-24.
2009
-
Mathematical Modeling of the Kinetics of Carbothermic Reduction of Iron Oxides in Ore-Coal Composite Pellets.
40:91-103.
2009
-
Kinetics of Scrap Melting in Liquid Steel: Multipiece Scrap Melting.
39:268-279.
2008
-
Relationship between Electronic Conductivity of Iron Oxide–Containing Slags and Reaction Kinetics with CO-CO2.
39:147-149.
2008
-
A Study of Spouts on Bath Surfaces from Gas Bubbling: Part I. Experimental Investigation.
38:367-375.
2007
-
A Study of Spouts on Bath Surfaces from Gas Bubbling: Part II. Elucidation of Plume Dynamics.
38:377-388.
2007
-
Authors’ Reply.
38:501-502.
2007
-
Coating Weight Model for the Continuous Hot-Dip Galvanizing Process.
38:413-424.
2007
-
Fe Solubility in the Zn-Rich Corner of the Zn-Al-Fe System for Use in Continuous Galvanizing and Galvannealing.
38:215-230.
2007
-
Analysis of interfacial area changes during spontaneous emulsification of metal droplets in slag.
37:1087-1091.
2006
-
Modeling of slag eye formation over a metal bath due to gas bubbling.
37:763-772.
2006
-
A comprehensive kinetic model for the CO-CO2 reaction with iron oxide-containing slags.
37:61-69.
2006
-
Electrical and electronic conductivity of CaO-SiO2-FeO x slags at various oxygen potentials: Part I. Experimental results.
37:41-49.
2006
-
Electrical and electronic conductivity of CaO-SiO2-FeOx slags at various oxygen potentials: Part II. Mechanism and a model of electronic conduction.
37:51-60.
2006
-
Analysis of the source of dynamic interfacial phenomena during reaction between metal droplets and slag.
36:591-604.
2005
-
Degradation of MgO Refractory in CaO-SiO2-MgO-FeOx and CaO-SiO2-Al2O3-MgO-FeOx Slags under Complex Flow Conditions.
36B:453-453.
2005
-
Modeling of trajectory and residence time of metal droplets in slag-metal-gas emulsions in oxygen steelmaking.
36:525-535.
2005
-
Kinetics of CO-CO2 reaction with CaO-SiO2-FeOx melts.
36:169-178.
2005
-
Kinetics of metal/slag reactions during spontaneous emulsification.
36:219-227.
2005
-
Kinetics of scrap melting in liquid steel.
36:293-302.
2005
-
The use of secondary ion mass spectrometry for investigating oxygen in pyrometallurgical reactions.
34:355-358.
2003
-
A water model and numerical study of the spout height in a gas-stirred vessel.
33:377-384.
2002
-
Die soldering: Mechanism of the interface reaction between molten aluminum alloy and tool steel.
33:465-476.
2002
-
The search for an economical and environmentally friendly ironmaking process.
32:757-762.
2001
-
Modeling of gas-liquid reactions in ladle metallurgy: Part I. Physical modeling.
31:1447-1455.
2000
-
Modeling of gas-liquid reactions in ladle metallurgy: Part II. Numerical simulation.
31:1457-1464.
2000
-
Developments in blast furnace process control at port kembla based on process fundamentals.
31:993-1003.
2000
-
Settling of multisized clusters of alumina particles in liquid aluminum.
30:241-247.
1999
-
Monte carlo simulation of clustering of alumina particles in turbulent liquid aluminum.
29:785-791.
1998
-
The kinetics of dephosphorization of carbon-saturated iron using an oxidizing slag.
29:111-118.
1998
-
Transport phenomena in electric smelting of nickel matte: Part I. Electric potential distribution.
29:77-83.
1998
-
Transport phenomena in electric smelting of nickel matte: Part II. Mathematical modeling.
29:85-94.
1998
-
The kinetics of selenium removal from molten copper by powder injection.
28:1039-1051.
1997
-
Dissolution of alumina in mold fluxes.
28:275-279.
1997
-
Solidification of particle-reinforced metal-matrix composites.
27:663-671.
1996
-
A multiphase fluid mechanics approach to gas holdup in bath smelting processes.
27:195-201.
1996
-
Settling and clustering of silicon carbide particles in aluminum metal matrix composites.
26:981-989.
1995
-
Simultaneous reduction and carburization of ilmenite.
26:485-494.
1995
-
The impact of bubble dynamics on the flow in plumes of ladle water models.
26:625-635.
1995
-
Solid-solution formation between arsenic and antimony oxides.
25:865-871.
1994
-
Thermal separation of arsenic and antimony oxides.
25:873-884.
1994
-
Kinetics in multicomponent metallic-ionic systems.
25:579-587.
1994
-
Measurement and modeling of turbulence in the gas/liquid two-phase zone during gas injection.
24:695-705.
1993
-
A study of ion activities in ionic solutions.
24:317-323.
1993
-
Mathematical modeling of postcombustion in a KOBM converter.
24:179-188.
1993
-
Finite element modeling of transient heat transfer and microstructural evolution in welds: Part II. Modeling of grain growth in austenitic stainless steels.
23:841-845.
1992
-
Measurements of the internal structure of gas-liquid plumes.
23:779-788.
1992
-
Particle sedimentation during processing of liquid metal-matrix composites.
23:753-763.
1992
-
Collagen proteins in electrorefining: Rate constants for glue hydrolysis and effects of molar mass on glue activity.
23:125-133.
1992
-
The breakup of bubbles into jets during submerged gas injection.
21:997-1003.
1990
-
Heat transfer and lance clogging during submerged powder injection.
18:105-117.
1987
-
A multi-phase model for plumes in powder injection refining processes.
17:77-85.
1986
-
A pressurized screw feeder for powder injection.
17:229-231.
1986
-
A unified approach to bubbling-jetting phenomena in powder injection into iron and steel.
16:211-225.
1985
-
Kinetics of chlorination of Co and Co-10 At. Pct Pt alloy by reaction with HCI gas.
13:349-356.
1982
-
The kinetics of molten iron desulfurization using magnesium vapor.
12:755-767.
1981
-
The Influence of calcia and magnesia in wustite on the kinetics of metallization and iron whisker formation.
11:409-414.
1980
-
Communications.
9:721-722.
1978
-
Kinetics and mechanism of the formation of dense mgo layer in pitch-bearing magnesite brick during service.
9:353-364.
1978
-
Bubble formation at nozzles in pig iron.
9:101-110.
1978
-
The measurement and prediction of the vaporization of magnesium from an inductively stirred melt.
9:151-154.
1978
-
Kinetics of the reactions between silica and alumino-silicate refractories and molten iron.
5:249-254.
1974
-
The influence of warm rolling on the fracture toughness of bainitic steels.
4:2051-2061.
1973
-
Thermal diffusion in kinetic and equilibrium measurements by levitation technique.
4:575-583.
1973
-
Fracture of steels containing pearlite.
3:2797-2804.
1972
-
Surface tension of pure liquid and supercooled iron.
2:2949-2950.
1971
-
Surface tension measurements on pure liquid iron and nickel by an oscillating drop technique.
2:817-823.
1971
-
On the kinetics of coupled sulfur and oxygen transfer through an ionic diaphragm.
1:267-270.
1970
-
A Study on Hot Tearing in Direct Chill Casting of Al-Mn-Mg Alloys Using a Multi-scale Approach
2021
has subject area
Identity
International Standard Serial Number (ISSN)
-
0026-086X
-
0360-2141
-
1073-5615
Electronic International Standard Serial Number (EISSN)
-
1543-1916
-
2379-0083
-
2379-0229