publication venue for
- Effect of Annealing Temperature on the Selective Oxidation and Reactive Wetting of a 0.1C-6Mn-2Si Advanced High Strength Steel During Continuous Galvanizing Heat Treatments 2018
- Sampling Strategy of Bubble Characteristics in a 1:2 Scale Curved Continuous Casting Mold: Parametric and Prediction Study. isijint-2024-081. 2024
- Analytical Evaluation of Heat Flow in Oxygen Steelmaking. 62:1396-1407. 2022
- Dephosphorization Kinetics of Bloated Metal Droplets Reacting with Basic Slag Containing TiO<sub>2</sub>. 61:734-744. 2021
- A Parametric Study of a Multi-Slot Air Knife for Coating Thickness Reduction. 60:1040-1051. 2020
- Calculation of Initial Stage of Solidified Shell Deformation during <i>γ</i> to <i>δ</i> Transformation in Mold. 59:2036-2043. 2019
- Evaluating the Effect of the Competition between NbC Precipitation and Grain Size Evolution on the Hot Ductility of Nb Containing Steels. 59:1064-1071. 2019
- Effect of Coarse-grain and Low-grade Iron Ores on Sinter Properties. 57:795-804. 2017
- Modeling of Slag Entrainment and Interfacial Mass Transfer in Gas Stirred Ladles. 57:1962-1970. 2017
- Recent Advances in the Fluid Dynamics of Ladle Metallurgy. 55:1-6. 2015
- Relationship between Microstructure, Mechanical Properties and Damage Mechanisms in High Martensite Fraction Dual Phase Steels. 55:2237-2246. 2015
- Thermodynamic and Kinetic Aspects of Sulfur Evaporation from Fe–C Alloy Droplets. 55:717-722. 2015
- An Original Way for Producing a 2.4 GPa Strength Ductile Steel by Rolling of Martensite. 54:235-239. 2014
- Splashing in Oxygen Steelmaking. 54:836-844. 2014
- A Mathematical Model for Carbothermic Reduction of Dust-Carbon Composite Agglomerates. 53:1097-1105. 2013
- Characterization and Modeling of Manganese Effect on Strength and Strain Hardening of Martensitic Carbon Steels. 53:1076-1080. 2013
- Distribution of Carbon in Martensite During Quenching and Tempering of Dual Phase Steels and Consequences for Damage Properties. 53:1215-1223. 2013
- Predicting Transient Softening in the Sub-Critical Heat-Affected Zone of Dual-Phase and Martensitic Steel Welds. 53:110-118. 2013
- A Computational Fluid Dynamics Model of Shrouded Supersonic Jet Impingement on a Water Surface. 52:1026-1035. 2012
- Toward a New Interpretation of the Mechanical Behaviour of As-quenched Low Alloyed Martensitic Steels. 52:717-722. 2012
- Comprehensive Model of Oxygen Steelmaking Part 1: Model Development and Validation. 51:1086-1092. 2011
- Comprehensive Model of Oxygen Steelmaking Part 2: Application of Bloated Droplet Theory for Decarburization in Emulsion Zone. 51:1093-1101. 2011
- Comprehensive Model of Oxygen Steelmaking Part 3: Decarburization in Impact Zone. 51:1102-1109. 2011
- Inclined Jetting and Splashing in Electric Arc Furnace Steelmaking. 51:1439-1447. 2011
- A Unified Approach to the Fluid Dynamics of Gas–Liquid Plumes in Ladle Metallurgy. 50:1413-1421. 2010
- Cold Model Study of Emulsification Behavior in Bottom Blown Metallurgical Baths Covered with Thick Slag. 50:654-662. 2010
- Analysis of Droplet Generation in Oxygen Steelmaking. 49:24-28. 2009
- Kinetics of Flux Dissolution in Oxygen Steelmaking. 49:1474-1482. 2009
- An Extended Model for Slag Eye Size in Ladle Metallurgy. 48:1807-1809. 2008
- Effects of Heat Input and Martensite on HAZ Softening in Laser Welding of Dual Phase Steels. 48:809-814. 2008
- Metallurgical and Mechanical Properties of Fusion Zones of TRIP Steels in Laser Welding. 48:483-488. 2008
- Vanadium Precipitation During Intercritical Annealing in Cold Rolled TRIP Steels. 47:1168-1177. 2007
- Ferrite Transformation in High Magnetic Field Monitored by in-situ Magnetic Measurements. 46:1274-1276. 2006
- Analysis of the Effect of Mn on the Recrystallization Kinetics of High Nb Steel: An Example of Physically-based Alloy Design. 45:713-722. 2005
- Generation of Droplets in Slag-Metal Emulsions through Top Gas Blowing. 43:983-989. 2003
- Online Monitoring of Dynamic Slag Behavior in Ladle Metallurgy. 43:1286-1288. 2003
- Spout Eyes Area Correlation in Ladle Metallurgy. 43:262-263. 2003
- A Model of Isothermal and Non Isothermal Transformation Kinetics of Bainite in 0.5% C Steels.. 42:1010-1017. 2002
- An Improved Correlation for Predicting Terminal Velocity of Droplets and Bubbles in Slag-Metal-Gas Emulsion.. 42:1182-1184. 2002
- The Evolution of Ironmaking Process Based on Coal-Containing Iron Ore Agglomerates.. 41:807-812. 2001
- A Theoretical Investigation of Kinetics and Mechanisms of Iron Ore Reduction in an Ore/Coal Composite.. 39:123-129. 1999
- Building of a Mathematical Model for the Reduction of Iron Ore in Ore/Coal Composites.. 39:130-138. 1999
- Energy Dissipation Distribution in Gas-stirred Liquids.. 39:113-122. 1999
- A Physical Modeling Study of Fluid-flow Phenomena in Gas-Slag.. 37:829-838. 1997
- Attack of Submerged Entry Nozzles by Mould Flux and Dissolution of Refractory Oxides in the Flux.. 37:102-108. 1997
- Mechanical Properties of Particulate MMC/AISI 304 Friction Joints.. 35:1315-1321. 1995
- Treatment of Steel with Alkaline-earth Elements.. 35:838-844. 1995
- Effect of Precipitate Size and Dispersion on Lankford Values of Titanium Stabilized Interstitial-free Steels.. 34:61-69. 1994
- The Effect of Calcium Carbide Particle Size Distribution on the Kinetics of Hot Metal Desulphurization.. 34:155-163. 1994
- Kinetics and Mechanisms of Reactions in Iron Ore/Coal Composites.. 33:1055-1061. 1993
- Mathematical Modelling of Reactions in Iron Ore/Coal Composites.. 33:1062-1069. 1993
- Mathematical Modelling of Reversed Flow and Heat Transfer in the Combustion Chamber of the LB Furnace.. 33:1159-1167. 1993
- Bench Scale Test of a New Ironmaking Process with Mixture of Iron Ore Concentrate and Pulverized Coal.. 32:733-740. 1992
- Recent advances in blast furnace ironmaking in North America.. 31:395-402. 1991