publication venue for
- Canadian pyrrhotite treatment: the history, inventory and potential for tailings processing 2017
- Mathematical and physical modelling of fluid flow and heat transfer in electric smelting 1998
- Characterisation of titania slag produced by a novel process: acidolysis performance. 61:454-463. 2022
- EFFECT of surface treatment on corrosion control of P91 hydrothermal aqueous solutions. 60:306-319. 2021
- Properties of a powder metallurgy low-alloy steel with varying fractions of large iron particles. 60:249-264. 2021
- Generation of titania-rich slag and iron from ilmenite concentrate by carbothermic reduction and magnetic separation in the presence of Na2CO3. 59:393-404. 2020
- A linkage between the activity and the chemical potential. 59:36-40. 2020
- A review of the beneficiation of low-grade manganese ores by magnetic separation. 59:1-16. 2020
- On the practicality of Clausius’ maxim. 58:116-118. 2019
- Unusual reference states for chemical potentials. 58:119-122. 2019
- A molecular dynamics study of the nucleus interface structure and orientation relationships during the austenite-to-ferrite transformation in pure Fe. 57:12-19. 2018
- A tribute to Professor G.R. Purdy. 57:1-1. 2018
- Effect of water vapour partial pressure on the chromia (Cr2O3)-based scale stability. 57:89-98. 2018
- On growth and form a metallurgical viewpoint. 57:38-45. 2018
- Effect of surface preparation on the corrosion resistance of friction stir linear lap welded AZ31B-H24. 56:308-321. 2017
- On a number of inflection points of activity curves for a regular solution. 56:368-369. 2017
- Numerical simulation of froth formation in aerated slurry coupled with population balance modelling. 56:45-57. 2017
- Thermodynamics and kinetics analyses of ZrB2formation in molten aluminium alloys. 55:161-172. 2016
- Design of mould fluxes for continuous casting of special steels. 54:467-476. 2015
- Exfoliation corrosion of an extruded low-Cu-containing AA7003-T6 profile with a partially recrystallised grain structure. 54:349-358. 2015
- Influence of thermal diffusion on decarburisation of iron–chromium alloy droplets by oxygen–argon gas mixtures. 54:177-184. 2015
- Stoichiometric constraint and calculability of chemical potential. 54:123-124. 2015
- Critical role of carbon during production of ferroniobium alloy additions. 53:423-431. 2014
- Exfoliation corrosion of artificially aged AA7003 extrusions. 53:455-459. 2014
- Kinetic analysis of silicothermic process under flowing argon atmosphere. 53:17-25. 2014
- Austenite particle coarsening and delta-ferrite grain growth in model Fe–Al alloy. 52:90-97. 2013
- Defect structure of pseudo phases of wüstite. 52:23-33. 2013
- Letter from incoming Editor-in-Chief. 52:1-1. 2013
- Microstructure, hardness and tensile properties of fusion zone in laser welding of advanced high strength steels. 51:328-335. 2012
- Removal of iron from recycled aluminium alloys. 51:75-80. 2012
- Abnormal and post-abnormal austenite grain growth kinetics in Nb–Ti microalloyed steels. 50:389-395. 2011
- Morphology and distribution of martensite in 301L alloy induced by different subsequent processes after prior deformation. 50:396-407. 2011
- Reduction behaviour of rice husk ash for preparation of high purity silicon. 50:341-349. 2011
- Influence of cooling rate and composition on formation of intermetallic phases in solidifying Al–Fe–Si melts. 50:173-180. 2011
- Solvent refining of silicon using nickel as impurity getter. 50:166-172. 2011
- Nugget formation and growth during resistance spot welding of aluminium alloy 5182. 50:61-71. 2011
- Erratum: Droplet solidification of impulse atomized Al-0.61Fe and Al-1.9Fe (Canadian Metallurgical Quarterly (2010) 49:3 (275-292)). 49:446. 2010
- Novel Thermal Processing of Dual Phase Steels: II – Work Hardening and Fracture Mechanisms. 49:91-97. 2010
- Microstructural Design of Multiphase Advanced High Strength Steels. 48:237-245. 2009
- Microstructural Design of Multiphase Advanced High Strength Steels. 48:237-245. 2009
- Use of the Cone Expansion Test to Assess the Potential for Longitudinal Seam Failure in Extruded AZ31 and AM30 Mg Alloy Tubes. 48:167-176. 2009
- NOVEL THERMAL PROCESSING OF DUAL PHASE STEELS: I – MICROSTRUCTURAL DESIGN. 47:83-90. 2008
- NOVEL THERMAL PROCESSING OF DUAL PHASE STEELS: I – MICROSTRUCTURAL DESIGN. 47:83-90. 2008
- High Temperature behaviour of Directly Reduced Iron Fines. 46:373-378. 2007
- High Temperature behaviour of Directly Reduced Iron Fines. 46:373-378. 2007
- Ladle Eye Area Measurement using Multivariate Image Analysis. 46:397-405. 2007
- Flash Furnace Off-Gas Cooling in a Plate Column: Reduction of Pressure Drop by Column Design Modification. 45:409-415. 2006
- ELECTRIC ARC FURNACE DUST INJECTION INTO IRON AND STEEL MELTS. 45:1-8. 2006
- GAS SLAG REACTION KINETICS IN SLAG CLEANING OF COPPER SLAGS. 45:167-174. 2006
- ZINC SOLUBILITY MEASUREMENTS AND THERMODYNAMIC EVALUATION OF Zn-Pb-Bi TERNARY SYSTEM. 45:117-130. 2006
- ZINC SOLUBILITY MEASUREMENTS AND THERMODYNAMIC EVALUATION OF Zn-Pb-Bi TERNARY SYSTEM. 45:117-130. 2006
- Explaining the gap between ASIC and custom power. 44:281-281. 2005
- KINETICS OF COAL INJECTION INTO IRON OXIDE CONTAINING SLAGS. 44:85-94. 2005
- KINETICS OF COAL INJECTION INTO IRON OXIDE CONTAINING SLAGS. 44:85-94. 2005
- RESIDENCE TIME OF METAL DROPLETS IN SLAG-METAL-GAS EMULSIONS THROUGH TOP GAS BLOWING. 44:119-130. 2005
- RESIDENCE TIME OF METAL DROPLETS IN SLAG-METAL-GAS EMULSIONS THROUGH TOP GAS BLOWING. 44:119-130. 2005
- SLAG LINE DISSOLUTION OF MgO REFRACTORY. 44:323-330. 2005
- HOT WORKABILITY OF 2304 AND 2205 DUPLEX STAINLESS STEELS. 43:339-353. 2004
- The Bainite Transformation Stage in the Processing of Trip-Aided Sheet Steels. 43:25-34. 2004
- On the Coupling Between Solute Drag and Recrystallization Kinetics. 42:121-124. 2003
- Cathodic Electrodeposition of Ceramic Coatings for Oxidation Protection of Materials at Elevated Temperatures. 41:497-505. 2002
- Corrosion Behaviour of an Experimental Nickel Aluminum Bronze Within an Artificial Crevice. 41:121-132. 2002
- Some Fundamental and Computational Aspects of Paraequilibrium. 41:231-242. 2002
- Entrainment From A Flat Liquid-Liquid Interface. 39:113-120. 2000
- Prediction of Strain Distribution in Aluminum Tailor Welded Blanks for Different Welding Techniques. 39:493-502. 2000
- Mathematical and Physical Modelling of Fluid Flow and Heat Transfer in Electric Smelting. 37:265-273. 1998
- Recent Developments in the Environment Process. 36:333-340. 1997
- Recent developments in the environment process. 36:333-340. 1997
- The tensile properties of a particulate reinforced Al alloy in the temperature range - 196-300°C. 35:189-198. 1996
- The Tensile Properties of a Particulate Reinforced Al Alloy in the Temperature Range −196–300°C. 35:189-198. 1996
- Flow patterns and mixing in a cold model of the Inco flash furnace. 35:451-462. 1996
- Physical Modelling of Thermal Stratification, Bottom Build-Up and Mixing in Submerged ARC Electric Smelting. 31:31-40. 1992
- The Influence of Pressure on Fracture of a Ti-V Plate Steel. 30:31-37. 1991
- The Kinetics of Antimony Removal from Copper by Soda Injection. 29:51-65. 1990
- On the Development of a Metallographic Method to Determine the Strain of Ferrite Phase in a HSLA Steel. 28:49-54. 1989
- Effect of Additives on the Strength, Reducibility and Swelling of Low Silica Iron Ore Pellets. 26:329-339. 1987
- The Influence of Lance Orientation and Gas Evolution on Particle-Liquid Contact During Submerged Powder Injection. 25:297-306. 1986
- Continuous Reduction of Iron Ore with Coal in an Electrically Heated Furnace. 25:241-246. 1986
- Acoustic Emission During Corrosion. 25:73-77. 1986
- Radiation Damage Effects in Solid Wastes. 22:81-86. 1983
- The Role of an Interfacial Product Layer in Magnesium Desulphurization of Molten Iron. 21:429-443. 1982
- The Influence of Rolling Practice on Fracture Properties of Hot Rolled Plate. 21:299-308. 1982
- The Kinetics of Gasification of Alkalis From the Gangue in Iron Ores by Calcium Chloride. 21:179-186. 1982
- Growth of Austenite in the Intercritical Annealing of Fe-C-Mn Dual Phase Steels. 20:339-350. 1981
- Bubbling Behaviour in Molten Metals. 19:381-387. 1980
- Deformation Twinning in Iron Alloys Containing Dispersed Particles. 19:229-243. 1980
- Fracture Toughness of Welded Low Alloy Steels. 19:177-182. 1980
- Impact Toughness of A Pipeline Steel. 16:210-213. 1977
- The kinetics of magnesium vapour dissolution into pig iron. 15:325-332. 1976
- The attack of alumina-containing steelmaking slags on magnesite brick. 15:61-66. 1976
- Effect of dissolved oxygen on the surface tension of liquid iron. 14:111-115. 1975
- Effect of dissolved oxygen on the surface tension of liquid iron. 14:111-115. 1975
- Some aspects of the fracture behaviour of high strength, low alloy steels. 14:69-83. 1975
- The occurrence of delamination in a control rolled HSLA steel. 14:117-122. 1975
- The occurrence of delamination in a control rolled HSLA steel. 14:117-122. 1975
- The kinetics of the reactions between silica and alumino-silicate refractories and carbon-saturated iron. 13:435-441. 1974
- Interdiffusion coefficients of Cr and Ni in liquid iron in the stainless steel range. 12:455-458. 1973
- The structure and properties of warm-rolled steels. 11:439-449. 1972
- Kinetics of iron ore reduction in a fluidized bed with intermittent gas flow. 8:325-329. 1969
- Estimating terminal phase equilibria in ternary systems. 8:251-256. 1969
- Fracture in quench-aged low-carbon steels. 8:51-58. 1969
- Chemical kinetics of gaseous reduction of hematite. 7:3-13. 1968