selected scholarly activity
-
chapters
-
conferences
- FRAM Optimization: 3D Print Orientation and Concurrent Topology Optimization for Minimize Mass Problem Statements. SAE Technical Papers. 2024
- Multi-Material and Multi-Objective Topology Optimization Considering Crashworthiness. SAE Technical Papers. 2024
- Stress-Constrained Multi-Material Topology Optimization. SAE Technical Papers. 2024
- Topology and Build Orientation Optimization for Additive Manufacturing: Influence of Printing on Raft and Build Plate. SAE Technical Papers. 2024
- Design and Build of an Aircraft Smart Table Using Additive Manufacturing and Topology Optimization. AIAA Aviation Forum and ASCEND, 2024. 2024
- Multi-Material and Multi-Joint Topology Optimization Considering Multiple Design Spaces. Volume 3B: 49th Design Automation Conference (DAC). 2023
- Frequency-Constrained Multi-Material Topology Optimization: Commercial Solver Integrable Sensitivities. SAE Technical Papers. 2023
- Multi-Joint Topology Optimization: An Effective Approach for Practical Multi-Material Design Problems. SAE Technical Papers. 4-18. 2023
- Multi-Material Topology Optimization Considering Crashworthiness. SAE Technical Papers. 2023
- Gradient Based Simultaneous Structural and Kinematic Optimization of Landing Gear Members based on the Modified Input-Output Equation for Multibody Kinematics. AIAA SCITECH 2023 Forum. 2023
- Multi-Material Topology Optimization of an Urban Air Mobility Vehicle Battery Pack. AIAA SCITECH 2023 Forum. 2023
- Structurally Motivated Print Orientation Optimization for Fiber Reinforced Additive Manufacturing. AIAA SCITECH 2023 Forum. 2023
- Thermal Packaging Optimization of a UAM Nacelle Using a Dynamic Acceleration Methodology. AIAA SCITECH 2023 Forum. 2023
- Topology Optimization of Stringer and Frame Locations Using Equivalent Radiated Power. AIAA SCITECH 2023 Forum. 2023
- Free-Size Optimization of a Stiffened Panel Using Equivalent Radiated Power. AIAA AVIATION 2022 Forum. 2022
- Multi-Material Topology Optimization for the Conceptual Design of an Additively Manufactured Aerospace Smart Table. AIAA AVIATION 2022 Forum. 2022
- Simultaneous Free-Size, Gauge, and Composite Optimization for Automotive Chassis Design. SAE Technical Papers. 2022
- Exploring New Joining Techniques of CFRP Cross Member Chassis. SAE Technical Papers. 2022
- Parts Consolidation of Automotive Front Crossmember: From Two-Piece CFRP Design to One-Piece Design. SAE Technical Papers. 521-532. 2022
- Multi-Material and Multi-Joint Topology Optimization for Lightweight and Cost-Effective Design. Volume 3B: 47th Design Automation Conference (DAC). 2021
- Mixed Integer Optimization of Aircraft Rolling Stock and Bogie. AIAA AVIATION 2021 FORUM. 2021
- Multidisciplinary Design Optimization of Aircraft Landing Gear. AIAA AVIATION 2021 FORUM. 2021
- Structural Design Optimization for CFRP in a Personal Aerial Vehicle. AIAA AVIATION 2021 FORUM. 2021
- Automotive Hood Panel Design Utilizing Anisotropic Multi-Material Topology Optimization. SAE Technical Papers. 2658-2665. 2021
- Control Arm Design Utilizing Multi-Material Topology Optimization. SAE Technical Papers. 2021
- Modified Multi-material Topology Optimization Considering Isotropic and Anisotropic Materials Mixture. SAE Technical Papers. 2021
- Multi-Joint Topology Optimization: A Method for Considering Joining in Multi-Material Design. SAE Technical Papers. 2021
- Multi-Material Topology Optimization Considering Draw Direction Constraints. SAE Technical Papers. 2021
- Aircraft Wing Design Through Concurrent Thickness and Material Optimization. AIAA Scitech 2021 Forum. 1-9. 2021
- Multi-Material Topology Optimization for Conceptual-Level Aircraft Seat Design. AIAA Scitech 2021 Forum. 1-9. 2021
- Topology Optimization of a Section of a Morphing Serpentine Aircraft Inlet. AIAA Scitech 2021 Forum. 1-12. 2021
- Natural Frequency Based Topology Optimization of an Aircraft Engine Support Frame. Volume 7: 32nd Conference on Mechanical Vibration and Noise (VIB). 2020
- Motorcycle Chassis Design Utilizing Multi-Material Topology Optimization. SAE Technical Papers. 1905-1912. 2020
- Multi-Material Topology Optimization Considering Manufacturing Constraints. SAE Technical Papers. 3268-3277. 2020
- Assembly Level Topology Optimization Towards a Part Consolidation Algorithm for Additive Manufacturing. AIAA Scitech 2020 Forum. 2020
- Displacement Controlled 2D Compliant Mechanisms for use in Morphing Structures. AIAA Scitech 2020 Forum. 1-10. 2020
- Additive Manufacturing Experimental Infill Testing and Optimization for Automotive Lightweighting. SAE Technical Papers. 2019
- Multi-Material Topology Optimization and Multi-Material Selection in Design. SAE Technical Papers. 2019
- Multi-Material Topology Optimization as a Concept Generation and Design Tool. SAE Technical Papers. 2019
- Multi-Material Topology Optimization: A Practical Method for Efficient Material Selection and Design. SAE Technical Papers. 2019
- A Novel Adaptive Topology Optimization Method Considering Unnecessary Element Removal and Progressive Mesh Refinement. Volume 2B: 44th Design Automation Conference. v02bt03a002-v02bt03a002. 2018
- Advanced Primal-Dual Interior-Point Method for the Method of Moving Asymptotes. Volume 1A: 38th Computers and Information in Engineering Conference. v01at02a004-v01at02a004. 2018
- Coupled Multi-Material and Joint Topology Optimization: A Proof of Concept. Volume 2B: 44th Design Automation Conference. 2018
- Cutting Tool Wear Estimation Using a Genetic Algorithm Based Long Short-Term Memory Neural Network. Volume 8: 30th Conference on Mechanical Vibration and Noise. 2018
- Damage Assessment on the Surface and Honeycomb Core of the Aluminum Sandwich Panel Subjected to Low-Velocity Impact. Volume 6: 14th International Conference on Multibody Systems, Nonlinear Dynamics, and Control. 2018
- Effect of Stiffener Configuration on Bulkhead Modal Parameters. Volume 8: 30th Conference on Mechanical Vibration and Noise. 2018
- Influence of the Initial Temperature on the Clutch Hot Judder. Volume 8: 30th Conference on Mechanical Vibration and Noise. 2018
- Minimization of Cost and Print Time of Additive Manufacturing via Topology Optimization. Volume 1A: 38th Computers and Information in Engineering Conference. v01at02a040-v01at02a040. 2018
- System Level Design Optimization Method for Lightweight Manufacturable Design. Volume 4: 23rd Design for Manufacturing and the Life Cycle Conference; 12th International Conference on Micro- and Nanosystems. 2018
- A NOVEL ADAPTIVE TOPOLOGY OPTIMIZATION METHOD CONSIDERING UNNECESSARY ELEMENT REMOVAL AND PROGRESSIVE MESH REFINEMENT. PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2018, VOL 2B. 2018
- ADVANCED PRIMAL-DUAL INTERIOR-POINT METHOD FOR THE METHOD OF MOVING ASYMPTOTES. PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2018, VOL 1A. 2018
- Advanced Finite Element Analysis of a Lightweight Nanometal-Polymer Hybrid Component with Experimental Validation, and Its Applications to Vehicle Lightweighting. SAE Technical Papers. 2018
- MINIMIZATION OF COST AND PRINT TIME OF ADDITIVE MANUFACTURING VIA TOPOLOGY OPTIMIZATION. PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2018, VOL 1A. 2018
- Multi-Material Topology Optimization: A Practical Approach and Application. SAE Technical Papers. 2018
- Computational Modal Analysis of a Twin-Engine Rear Fuselage Mounted Aircraft Support Frame. Volume 8: 29th Conference on Mechanical Vibration and Noise. 2017
- Optimal Spacecraft Hardware Placement to Minimize Required Power Input for Hibernation Survival. 17th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 2016
- Optimal spacecraft hardware placement to minimize required power input for hibernation survival. 17th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 2016
- Lightweight Optimal Design of a Rear Bumper System Based on Surrogate Models. SAE Technical Papers. 2015
- Calculation of carbon emissions in metal forming manufacturing processes with eco-benign lubrication. Transactions of the North American Manufacturing Research Institute of SME. 751-758. 2010
- Improving computational efficiency and stability of material models for finite element analyses of metal powder compaction. Transactions of the North American Manufacturing Research Institute of SME. 623-631. 2010
- Nonlinear finite element analysis of metal powder die compaction using various plasticity models. Transactions of the North American Manufacturing Research Institute of SME. 357-363. 2009
- Stress rupture predictions of pressure vessels exposed to fully engulfing and local impingement accidental fire heat loads. Engineering Failure Analysis. 1141-1152. 2009
- Uniaxial high-temperature creep property predictions made by CDM and MPC omega techniques for ASME SA 455 steel. Engineering Failure Analysis. 1303-1313. 2009
- A Resource-Efficient IP Traceback Technique for Mobile Ad-hoc Networks Based on Time-Tagged Bloom Filter. 2008 Third International Conference on Convergence and Hybrid Information Technology. 549-554. 2008
- A finite element model for ejection of green parts in PM compaction. Transactions of the North American Manufacturing Research Institute of SME. 397-404. 2008
- Computational Simulation for Trabecular Adaptation in Human Proximal Femur Using Design Space Optimization. 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 2008
- Multiobjective Design Optimization of Total Knee Replacements Considering UHMWPE Damage and Kinematics. 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 2008
- Design Optimization of an Automotive Universal Joint as an Assembly. 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 2006
- Multidisciplinary Design Optimization of a Zero Emission Vehicle Chassis Considering Crashworthiness and Hydroformability. 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 912-925. 2006
- Shape optimization of an Un-cemented Total Hip Replacement Prosthesis Considering Volumetric Wear. 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 18-32. 2006
- Adaptive weighted sum method for multiobjective optimization: a new method for Pareto front generation. Structural and Multidisciplinary Optimization. 105-116. 2006
- Design optimization of an automotive universal joint considering manufacturing cost. Proceedings of the IASTED International Conference on Modelling and Simulation. 499-+. 2006
- Variable chromosome length genetic algorithm for progressive refinement in topology optimization. Structural and Multidisciplinary Optimization. 445-456. 2005
- Adaptive weighted-sum method for bi-objective optimization: Pareto front generation. Structural and Multidisciplinary Optimization. 149-158. 2005
- Innovative modern engineering design and rapid prototyping course: A rewarding CAD/CAE/CAM experience for undergraduates. ASEE Annual Conference Proceedings. 7405-7416. 2004
- Adaptive Weighted Sum Method for Multiobjective Optimization. Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 1859-1871. 2004
- Continuum Topology Optimization. 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 2471-2483. 2004
- Design for Flexibility: Performance and Economic Optimization of Product Platform Components. 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 113-124. 2004
- Multidisciplinary Structural Truss Topology Optimization for Reconfigurability. 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 472-487. 2004
- Structural Shape Optimization Considering Both Performance and Manufacturing Cost. 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. 3240-3251. 2004
- Adaptive Weighted Sum Method for Bi-objective Optimization. 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference. 236-248. 2004
- Variable Chromosome Length Genetic Algorithm for Structural Topology Design Optimization. Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 4203-4214. 2004
- An Evolutionary Method of Topology Optimal Design by Increasing and Decreasing the Number of Design Variables. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization. 2002
- Novel x-ray mask structure with low out-of-plane distortion. Proceedings of SPIE - The International Society for Optical Engineering. 511-517. 1998
- Efficient image understanding based on the Markov random field model and error backpropagation network. [1992] Proceedings. 11th IAPR International Conference on Pattern Recognition. 441-444. 1992
- Markov random field based image labeling with parameter estimation by error backpropagation. 962-967. 1991
- A Comparison of Lightweight Design Concepts of a Passenger Aircraft Seat Using Topology and CFRP Laminate Optimization. Progress in Canadian Mechanical Engineering. Volume 3.
- A Generalized Consolidated Topology Optimization and DfAM Design Approach and its Application for Assembly Design. Progress in Canadian Mechanical Engineering. Volume 3.
- An Optimization Method to Find the Initial Catenary Configuration by Using a Gradient-Based Algorithm. Progress in Canadian Mechanical Engineering. Volume 3.
- Gradient-Based Pipe Routing Tool for Aero-Engines. Progress in Canadian Mechanical Engineering. Volume 3.
- Innovative Modern Engineering Design And Rapid Prototyping Course: A Rewarding Cad/Cae/Cam Experience For Undergraduates. 2004 Annual Conference Proceedings. 9.740.1-9.740.12.
- Validation of a Low Fidelity Catenary Model Developed Using a Novel Optimization Algorithm. Progress in Canadian Mechanical Engineering. Volume 3.
-
journal articles
- 3D decomposition optimization of topology-optimized structures considering a build volume constraint for additive manufacturing. Computer Methods in Applied Mechanics and Engineering. 432:117357. 2024
- Damping optimization of a fully viscoelastic structure with enforced mass reduction. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 238:11159-11176. 2024
- Packing optimization of practical systems using a dynamic acceleration methodology. Journal of Engineering and Applied Science. 71:92. 2024
- Thermally Driven Multi-Objective Packing Optimization Using Acceleration Fields. Journal of Mechanical Design - Transactions of the ASME. 146. 2024
- Topology and build orientation optimization for additive manufacturing considering build height and overhang area. Structural and Multidisciplinary Optimization. 67. 2024
- Design of a metal additive manufactured aircraft seat leg using topology optimization and part decomposition. Rapid Prototyping Journal. 30:947-969. 2024
- Optimization of an aircraft fuselage assembly to minimize radiated sound power. Journal of the Acoustical Society of America. 155:A333-A333. 2024
- Out-of-plane compressive response of aluminum honeycomb sandwich panels: Adhesive geometry and bonding effects. Thin-Walled Structures. 196:111509-111509. 2024
- Fiber reinforced additive manufacturing: structurally motivated print orientation and sequential topology optimization of anisotropic material. Rapid Prototyping Journal. 30:305-322. 2024
- Machine learning-based sound power topology optimization for shell structures. Engineering Optimization. 2024
- Multi-material topology optimization considering both isotropy and anisotropy with fibre orientation optimization. Engineering Optimization. ahead-of-print:1-25. 2024
- Optimization of a roller coaster bogie considering fatigue life. Engineering Optimization. ahead-of-print:1-31. 2024
- Layered fiber orientation optimization for continuous fiber reinforced polymer additive manufacturing using multi-material topology optimization. Progress in Additive Manufacturing. 8:1665-1676. 2023
- Integrated topology and packaging optimization for conceptual-level electric vehicle chassis design via the component-existence method. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 237:2118-2131. 2023
- Multi-joint topology optimization for stiffness constrained design problems. Structural and Multidisciplinary Optimization. 66. 2023
- All-terrain vehicle chassis design using multi-material topology optimization. Structural and Multidisciplinary Optimization. 66. 2023
- Mettl14 mutation restrains liver regeneration by attenuating mitogens derived from non-parenchymal liver cells. BMB reports. 55:633-638. 2022
- Bifidobacterial carbohydrate/nucleoside metabolism enhances oxidative phosphorylation in white adipose tissue to protect against diet-induced obesity. Microbiome. 10:188. 2022
- Partitioning a topology-optimized structure into additively manufacturable parts using a feature-mapping approach: a novel decomposition optimization method. Structural and Multidisciplinary Optimization. 65. 2022
- Multi material topology and stacking sequence optimization of composite laminated plates. Structural and Multidisciplinary Optimization. 65. 2022
- Ahnak depletion accelerates liver regeneration by modulating the TGF-β/Smad signaling pathway. BMB reports. 55:401-406. 2022
- Multi-material topology optimization considering natural frequency constraint. Engineering Computations. 39:2604-2629. 2022
- Implementing a non-local lattice particle method in the open-source large-scale atomic/molecular massively parallel simulator. Modelling and Simulation in Materials Science and Engineering. 30:054001-054001. 2022
- Integrated topology and packaging optimization for multi-phase multi-component problems. Structural and Multidisciplinary Optimization. 65. 2022
- Exercise-induced beige adipogenesis of iWAT in Cidea reporter mice. BMB reports. 55:187-191. 2022
- Schmitt–Kim additive manufacturing evaluation tree: a guide for new users. Progress in Additive Manufacturing. 7:375-397. 2022
- Surface and honeycomb core damage in adhesively bonded aluminum sandwich panels subjected to low-velocity impact. Composites Part B: Engineering. 230:109506-109506. 2022
- Advancements to commercial 2D infill for lightweighting of structural FDM components. Progress in Additive Manufacturing. 6:617-629. 2021
- Corrigendum. Therapeutic Apheresis and Dialysis. 25:1018-1018. 2021
- Integrated topology and packaging optimization using coupled material and component pseudo-densities. Structural and Multidisciplinary Optimization. 64:3345-3380. 2021
- Concurrent topology and stacking sequence optimization of composite laminate plates using lamination parameters. Composite Structures. 276:114556-114556. 2021
- Part consolidation for additive manufacturing: A multilayered topology optimization approach. International Journal for Numerical Methods in Engineering. 122:4987-5027. 2021
- Topology optimization for infill in MEx. Rapid Prototyping Journal. 27:1580-1590. 2021
- A novel method for concurrent thickness and material optimization of non-laminate structures. Structural and Multidisciplinary Optimization. 64:1421-1437. 2021
- Multi-material topology optimization considering isotropic and anisotropic materials combination. Structural and Multidisciplinary Optimization. 64:1567-1583. 2021
- A nonlinear-drift-driven Wiener process model for remaining useful life estimation considering three sources of variability. Reliability Engineering & System Safety. 212:107631-107631. 2021
- Simultaneous isotropic and anisotropic multi-material topology optimization for conceptual-level design of aerospace components. Structural and Multidisciplinary Optimization. 64:441-456. 2021
- Structural design of a morphing serpentine inlet using a multi-material topology optimization methodology. Structural and Multidisciplinary Optimization. 64:389-422. 2021
- Analysis of different RNN autoencoder variants for time series classification and machine prognostics. Mechanical Systems and Signal Processing. 149:107322-107322. 2021
- Material interface control in multi‐material topology optimization using pseudo‐cost domain method. International Journal for Numerical Methods in Engineering. 122:455-482. 2021
- Spatial gradient interface detection in topology optimization for an unstructured mesh. Structural and Multidisciplinary Optimization. 63:515-522. 2021
- Design optimization of a business aircraft seat considering static and dynamic certification loading and manufacturability. Structural and Multidisciplinary Optimization. 62:3457-3476. 2020
- Identifying optimal features for cutting tool condition monitoring using recurrent neural networks. Advances in Mechanical Engineering. 12:168781402098438-168781402098438. 2020
- A topology optimization implementation for depth-of-focus extension of binary phase filters. Structural and Multidisciplinary Optimization. 62:2731-2748. 2020
-
Void region restriction for additive manufacturing via a diffusion physics approach. International Journal for Numerical Methods in Engineering. 121:4347-4373. 2020 - Design for additive manufacturing: 3D simultaneous topology and build orientation optimization. Structural and Multidisciplinary Optimization. 62:1989-2009. 2020
- The effect of scan path on thermal gradient during selective laser melting. The International Journal of Advanced Manufacturing Technology. 110:1261-1274. 2020
- Simultaneous topology and build orientation optimization for minimization of additive manufacturing cost and time. International Journal for Numerical Methods in Engineering. 121:3442-3481. 2020
- Single variable-based multi-material structural optimization considering interface behavior. Computer Methods in Applied Mechanics and Engineering. 367:113114-113114. 2020
- Fas mutation reduces obesity by increasing IL-4 and IL-10 expression and promoting white adipose tissue browning. Scientific Reports. 10:12001. 2020
- An improved similarity-based prognostic algorithm for RUL estimation using an RNN autoencoder scheme. Reliability Engineering & System Safety. 199:106926-106926. 2020
- Intensive morphometric analysis of enormous alterations in skeletal bone system with micro-CT for AHNAK−/− mice. Anatomical Science International. 95:323-333. 2020
- Damping of Powder Metal Rings. SAE International Journal of Vehicle Dynamics, Stability, and NVH. 4:249-258. 2020
- Simultaneous single‐loop multimaterial and multijoint topology optimization. International Journal for Numerical Methods in Engineering. 121:1558-1594. 2020
- Influences of the uneven contact pressure and the initial temperature on the hot judder behavior in a multi-disc clutch. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 234:500-514. 2020
- Experimental investigation of adhesive fillet size on barely visible impact damage in metallic honeycomb sandwich panels. Composites Part B: Engineering. 184:107723-107723. 2020
- 3D topology optimization for cost and time minimization in additive manufacturing. Structural and Multidisciplinary Optimization. 61:731-748. 2020
- Effect of Bulkhead Pressurization on the Vibro-Acoustic Properties of an Aft-Fuselage-Mounted Twin-Engine Aircraft. Journal of Vibration, Acoustics, Stress, and Reliability in Design. 142. 2020
- Modified element stacking method for multi-material topology optimization with anisotropic materials. Structural and Multidisciplinary Optimization. 61:525-541. 2020
- Additive manufacturing infill optimization for automotive 3D-printed ABS components. Rapid Prototyping Journal. 26:89-99. 2020
- Damping of Powder Metal Rings. SAE International Journal of Vehicle Dynamics, Stability, and NVH. 4:247-258. 2020
- 3D multi-material and multi-joint topology optimization with tooling accessibility constraints. Structural and Multidisciplinary Optimization. 60:2531-2558. 2019
- Packaging optimization using the dynamic vector fields method. International Journal for Numerical Methods in Engineering. 120:860-879. 2019
- Substructuring verification of a rear fuselage mounted twin-engine aircraft. Aerospace Science and Technology. 93:105305-105305. 2019
- Topology optimization of a pre-stiffened aircraft bulkhead. Structural and Multidisciplinary Optimization. 60:1667-1685. 2019
- Intrinsic expression of viperin regulates thermogenesis in adipose tissues. Proceedings of the National Academy of Sciences of the United States of America. 116:17419-17428. 2019
- Multi-lattice inner structures for high-strength and light-weight in metal selective laser melting process. Materials and Design. 175:107786-107786. 2019
- Remaining useful life estimation using a bidirectional recurrent neural network based autoencoder scheme. Mechanical Systems and Signal Processing. 129:764-780. 2019
- An analytical study of the plasticity of sandwich honeycomb panels subjected to low-velocity impact. Composites Part B: Engineering. 168:121-128. 2019
- Metabolic dysfunction following weight regain compared to initial weight gain in a high-fat diet-induced obese mouse model. Journal of Nutritional Biochemistry. 69:44-52. 2019
- Multi-Objective Model Updating Optimization Considering Orthogonality. Journal of Computational and Nonlinear Dynamics. 14. 2019
- A multiobjective topology optimization approach for cost and time minimization in additive manufacturing. International Journal for Numerical Methods in Engineering. 118:371-394. 2019
- A time-space Kriging-based sequential metamodeling approach for multi-objective crashworthiness optimization. Applied Mathematical Modelling. 69:378-404. 2019
- Ahnak-knockout mice show susceptibility toBartonella henselaeinfection because of CD4+ T cell inactivation and decreased cytokine secretion. BMB reports. 52:289-294. 2019
- Hybrid data-driven physics-based model fusion framework for tool wear prediction. The International Journal of Advanced Manufacturing Technology. 101:2861-2872. 2019
- Anti-obesity effect of taurine through inhibition of adipogenesis in white fat tissue but not in brown fat tissue in a high-fat diet-induced obese mouse model. Amino Acids. 51:245-254. 2019
- Hybrid sequential fault estimation for multi-mode diagnosis of gas turbine engines. Mechanical Systems and Signal Processing. 115:255-268. 2019
- Multi-material topology optimization for automotive design problems. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 232:1950-1969. 2018
- Predictive Compressor Wash Optimization for Economic Operation of Gas Turbine. Journal of Engineering for Gas Turbines and Power. 140. 2018
- Multimaterial multijoint topology optimization. International Journal for Numerical Methods in Engineering. 115:1552-1579. 2018
- High-fat diet-induced lipidome perturbations in the cortex, hippocampus, hypothalamus, and olfactory bulb of mice. Biochimica et Biophysica Acta - Molecular and Cell Biology of Lipids. 1863:980-990. 2018
- Multi-material topology optimization for practical lightweight design. Structural and Multidisciplinary Optimization. 58:1081-1094. 2018
- Essential role of Ahnak in adipocyte differentiation leading to the transcriptional regulation of Bmpr1α expression. Cell Death and Disease. 9:864. 2018
- AHNAK Loss in Mice Promotes Type II Pneumocyte Hyperplasia and Lung Tumor Development. Molecular Cancer Research. 16:1287-1298. 2018
- Global transcriptome analysis identifies weight regain-induced activation of adaptive immune responses in white adipose tissue of mice. International Journal of Obesity. 42:755-764. 2018
- Design optimization of aircraft landing gear assembly under dynamic loading. Structural and Multidisciplinary Optimization. 57:1357-1375. 2018
- Neuronal Nitric Oxide Synthase Is a Novel Biomarker for the Interstitial Cells of Cajal in Stress-Induced Diarrhea-Dominant Irritable Bowel Syndrome. Digestive Diseases and Sciences. 63:619-627. 2018
- Clusterin is highly expressed in tubular complexes during spontaneous pancreatitis of spontaneous hypertensive rats. Journal of Veterinary Medical Science. 80:1553-1557. 2018
- RORα controls hepatic lipid homeostasis via negative regulation of PPARγ transcriptional network. Nature Communications. 8:162. 2017
- Lipidomic analysis of skeletal muscle tissues of p53 knockout mice by nUPLC-ESI-MS/MS. Scientific Reports. 7:3302. 2017
- NR1D1 Recruitment to Sites of DNA Damage Inhibits Repair and Is Associated with Chemosensitivity of Breast Cancer. Cancer Research. 77:2453-2463. 2017
- Comparison of Adult Hippocampal Neurogenesis and Susceptibility to Treadmill Exercise in Nine Mouse Strains. Neural Plasticity. 2017:1-13. 2017
- Evaluation of treadmill exercise effect on muscular lipid profiles of diabetic fatty rats by nanoflow liquid chromatography–tandem mass spectrometry. Scientific Reports. 6:29617. 2016
- AHNAK deficiency promotes browning and lipolysis in mice via increased responsiveness to β-adrenergic signalling. Scientific Reports. 6:23426. 2016
- Topology, size and shape optimization of an automotive cross car beam. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 229:1361-1378. 2015
- Increased Cell Proliferations and Neurogenesis in the Hippocampal Dentate Gyrus of Ahnak Deficient Mice. Neurochemical Research. 40:1457-1462. 2015
- Conceptual and detailed design of an automotive engine cradle by using topology, shape, and size optimization. Structural and Multidisciplinary Optimization. 51:547-564. 2015
- Helicobacter apodemussp. nov., a newHelicobacterspecies identified from the gastrointestinal tract of striped field mice in Korea. Journal of Veterinary Science. 16:475-475. 2015
- Correction: Obesity Resistance and Enhanced Insulin Sensitivity in Ahnak-/- Mice Fed a High Fat Diet Are Related to Impaired Adipogenesis and Increased Energy Expenditure. PLoS ONE. 10:e0144478-e0144478. 2015
- Obesity Resistance and Enhanced Insulin Sensitivity in Ahnak-/- Mice Fed a High Fat Diet Are Related to Impaired Adipogenesis and Increased Energy Expenditure. PLoS ONE. 10:e0139720-e0139720. 2015
- Identification of the responsible proteins for increased selenium bioavailability in the brain of transgenic rats overexpressing selenoprotein M. International Journal of Molecular Medicine. 34:1688-1698. 2014
- Influence of operating conditions on the optimum design of electric vehicle battery cooling plates. Journal of Power Sources. 245:644-655. 2014
- Improvement in robustness and computational efficiency of material models for finite element analysis of metal powder compaction and experimental validation. The International Journal of Advanced Manufacturing Technology. 68:1785-1795. 2013
- Optimal damping layout in a shell structure using topology optimization. Journal of Sound and Vibration. 332:2873-2883. 2013
- 1H NMR-based metabolite profiling of diet-induced obesity in a mouse mode. BMB reports. 45:419-424. 2012
- The development, calibration and validation of a numerical total knee replacement kinematics simulator considering laxity and unconstrained flexion motions. Computer Methods in Biomechanics and Biomedical Engineering. 15:585-593. 2012
- A new efficient convergence criterion for reducing computational expense in topology optimization: reducible design variable method. International Journal for Numerical Methods in Engineering. 90:752-783. 2012
- Quantifying the competing relationship between durability and kinematics of total knee replacements using multiobjective design optimization and validated computational models. Journal of Biomechanics. 45:141-147. 2012
- Computational Simulation of Bone Remodeling using Design Space Topology Optimization. Proceedings in Applied Mathematics and Mechanics. 11:97-98. 2011
- Design optimization of electric vehicle battery cooling plates for thermal performance. Journal of Power Sources. 196:10359-10368. 2011
- Comparison of different hip prosthesis shapes considering micro-level bone remodeling and stress-shielding criteria using three-dimensional design space topology optimization. Journal of Biomechanics. 44:1722-1728. 2011
- Design optimization of a total knee replacement for improved constraint and flexion kinematics. Journal of Biomechanics. 44:1014-1020. 2011
- G-, R- and C-Band Patterns of Goral (Nemorhaedus caudatus) and Comparison to Goat (Capra hircus). Molecules and Cells. 31:351-354. 2011
- Three-dimensional micro-level computational study of Wolff's law via trabecular bone remodeling in the human proximal femur using design space topology optimization. Journal of Biomechanics. 44:935-942. 2011
- Greenhouse gases emitted in manufacturing a product—A new economic model. CIRP annals. 60:53-56. 2011
- 1H NMR-based metabolomic study on resistance to diet-induced obesity in AHNAK knock-out mice. Biochemical and Biophysical Research Communications. 403:428-434. 2010
- Regulatory mechanism of hypothalamo-pituitary–adrenal (HPA) axis and neuronal changes after adrenalectomy in type 2 diabetes. Journal of Chemical Neuroanatomy. 40:130-139. 2010
- Effects of treadmill exercise on cyclooxygenase-2 in the hippocampus in type 2 diabetic rats: Correlation with the neuroblasts. Brain Research. 1341:84-92. 2010
- Application of design space optimization to bone remodeling simulation of trabecular architecture in human proximal femur for higher computational efficiency. Finite Elements in Analysis and Design. 46:311-319. 2010
- Metformin Normalizes Type 2 Diabetes-Induced Decrease in Cell Proliferation and Neuroblast Differentiation in the Rat Dentate Gyrus. Neurochemical Research. 35:645-650. 2010
- Mouse phenogenomics, toolbox for functional annotation of human genome. BMB reports. 43:79-90. 2010
- Computational study on the effect of loading alteration caused by disc degeneration on the trabecular architecture in human lumbar spine. Journal of Biomechanics. 43:492-499. 2010
- Erratum to “A holistic numerical model to predict strain hardening and damage of UHMWPE under multiple total knee replacement kinematics and experimental validation” [J. Biomech. 42 (2009) 2520–2527]. Journal of Biomechanics. 43:597-597. 2010
- Computational simulation of simultaneous cortical and trabecular bone change in human proximal femur during bone remodeling. Journal of Biomechanics. 43:294-301. 2010
- A holistic numerical model to predict strain hardening and damage of UHMWPE under multiple total knee replacement kinematics and experimental validation. Journal of Biomechanics. 42:2520-2527. 2009
- Effects of Treadmill Exercise on Cell Proliferation and Differentiation in the Subgranular Zone of the Dentate Gyrus in a Rat Model of Type II Diabetes. Neurochemical Research. 34:1039-1046. 2009
- Comparative Study on High Fat Diet-induced 4-Hydroxy-2E-nonenal Adducts in the Hippocampal CA1 Region of C57BL/6N and C3H/HeN Mice. Neurochemical Research. 34:964-972. 2009
- Design Optimization of a Total Hip Prosthesis for Wear Reduction. Journal of Biomechanical Engineering. 131:051003. 2009
- Glucocorticoid Receptor Changes Associate with Age in the Paraventricular Nucleus of Type II Diabetic Rat Model. Neurochemical Research. 34:851-858. 2009
- Three dimensional shape optimization of total knee replacements for reduced wear. Structural and Multidisciplinary Optimization. 38:405-414. 2009
- Total Hip Wear Assessment: A Comparison Between Computational and In Vitro Wear Assessment Techniques Using ISO 14242 Loading and Kinematics. Journal of Biomechanical Engineering. 131:041011. 2009
- Computational simulation of trabecular adaptation progress in human proximal femur during growth. Journal of Biomechanics. 42:573-580. 2009
- Expression of tissue-type transglutaminase (tTG) and the effect of tTG inhibitor on the hippocampal CA1 region after transient ischemia in gerbils. Brain Research. 1263:134-142. 2009
- Analogy of Strain Energy Density Based Bone-Remodeling Algorithm and Structural Topology Optimization. Journal of Biomechanical Engineering. 131:011012. 2009
- Effects of High Cholesterol Diet on Newly Generated Cells in the Dentate Gyrus of C57BL/6N and C3H/HeN Mice. Journal of Veterinary Medical Science. 71:753-758. 2009
- Effects of Methimazole on the Onset of Type 2 Diabetes in Leptin Receptor-Deficient Rats. Journal of Veterinary Medical Science. 71:275-280. 2009
- Multi-objective shape optimisation of an automotive universal joint assembly. International Journal of Heavy Vehicle Systems. 16:271-271. 2009
- Strain-specific differences in cell proliferation and differentiation in the dentate gyrus of C57BL/6N and C3H/HeN mice fed a high fat diet. Brain Research. 1241:1-6. 2008
- Computational study of Wolff's law with trabecular architecture in the human proximal femur using topology optimization. Journal of Biomechanics. 41:2353-2361. 2008
- Enhanced Expressions of Arginine Vasopressin (Avp) in the Hypothalamic Paraventricular and Supraoptic Nuclei of Type 2 Diabetic Rats. Neurochemical Research. 33:833-841. 2008
- Erratum to “Regulation of adipocyte differentiation by PEGylated all-trans retinoic acid: reduced cytotoxicity and attenuated lipid accumulation” [J Nutr Biochem 18 (2007) 322–331]. Journal of Nutritional Biochemistry. 19:206-206. 2008
- Reduced Hippocampal Cell Differentiation in the Subgranular Zone of the Dentate Gyrus in a Rat Model of Type II Diabetes. Neurochemical Research. 33:394-400. 2008
- Mechanics of the passive knee joint. Part 2: Interaction between the ligaments and the articular surfaces in guiding the joint motion. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 221:821-832. 2007
- Multidisciplinary design optimization of a zero-emission vehicle chassis considering crashworthiness and hydroformability. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 221:511-526. 2007
- Flexible platform component design under uncertainty. Journal of Intelligent Manufacturing. 18:115-126. 2007
- Mechanics of the passive knee joint. Part 1: The role of the tibial articular surfaces in guiding the passive motion. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 220:813-822. 2006
- Tyrosine 740 Phosphorylation of Discoidin Domain Receptor 2 by Src Stimulates Intramolecular Autophosphorylation and Shc Signaling Complex Formation. Journal of Biological Chemistry. 280:39058-39066. 2005
- Loss of expression of bone morphogenetic protein receptor type II in human prostate cancer cells. Oncogene. 23:7651-7659. 2004
- Polyglutamine-expanded ataxin-1 recruits Cu/Zn-superoxide dismutase into the nucleus of HeLa cells. Biochemical and Biophysical Research Communications. 307:660-665. 2003
- Optimization and Numerical Flow Analysis of a Valveless Micropump. JSME International Journal, Series C: Dynamics, Control, Robotics, Design and Menufacturing. 46:772-778. 2003
- The Human Papilloma Virus E7 Oncoprotein Inhibits Transforming Growth Factor-β Signaling by Blocking Binding of the Smad Complex to Its Target Sequence. Journal of Biological Chemistry. 277:38557-38564. 2002
- Raloxifene, a Mixed Estrogen Agonist/Antagonist, Induces Apoptosis through Cleavage of BAD in TSU-PR1 Human Cancer Cells. Journal of Biological Chemistry. 277:32510-32515. 2002
- Protection of Mice from Allergen-induced Asthma by Selenite. Journal of Biological Chemistry. 277:17871-17876. 2002
- Design space optimization using a numerical design continuation method. International Journal for Numerical Methods in Engineering. 53:1979-2002. 2002
- Redox regulation of cytosolic glycerol-3-phosphate dehydrogenase: Cys102 is the target of the redox control and essential for the catalytic activity. Biochimica et Biophysica Acta: international journal of biochemistry and biophysics. 1569:67-74. 2002
- Selenite Negatively Regulates Caspase-3 through a Redox Mechanism. Journal of Biological Chemistry. 275:8487-8491. 2000
- Transfer RNA identity change in anticodon variants of E. coli tRNA(Phe) in Vivo. Molecules and Cells. 10:76-82. 2000
- Selenite Inhibits the c-Jun N-terminal Kinase/Stress-activated Protein Kinase (JNK/SAPK) through a Thiol Redox Mechanism. Journal of Biological Chemistry. 275:2527-2531. 2000
- Blurring effect analysis of an x-ray mask for synchrotron radiation lithography. Journal of Vacuum Science and Technology B. 16:1992-1997. 1998
- Telomerase: A potential marker of bladder transitional cell carcinoma in bladder washes. Clinical Cancer Research. 4:535-538. 1998
- Inhibition of NF-κB DNA binding and nitric oxide induction in human T cells and lung adenocarcinoma cells by selenite treatment. Proceedings of the National Academy of Sciences of the United States of America. 94:12904-12907. 1997
- Loss of expression of transforming growth factor beta type I and type II receptors correlates with tumor grade in human prostate cancer. Clinical Cancer Research. 2:1255-1261. 1996
- Genetic change in transforming growth factor beta (TGF-beta) receptor type I gene correlates with insensitivity to TGF-beta 1 in human prostate cancer cells. Cancer Research. 56:44-48. 1996
- An integrated approach for scene understanding based on Markov Random Field model. Pattern Recognition. 28:1887-1897. 1995
- A systematic way for region-based image segmentation based on Markov Random Field model. Pattern Recognition Letters. 15:969-976. 1994
- Efficient image labeling based on markov random field and error backpropagation network. Pattern Recognition. 26:1695-1707. 1993
- Shape design sensitivity analysis and optimization of general shape arches. Computers & structures. 48:1025-1031. 1993