selected scholarly activity
-
chapters
- Creep and Creep Rupture of Oxide Ceramics 2017
- Characterization of Damage in Magnesium Using Digital Image Correlation and Electron Backscattered Diffraction Patterning. 111-114. 2014
- Inhomogeneous Deformation of AZ31 Magnesium Sheet in Uniaxial Tension. 307-311. 2011
- Ductility and Formability of Automotive Al Alloy Sheet. 113-122. 2000
- Creep Mechanisms in Multiphase Ceramics. 359-368. 1995
- Strength and Flawelimination Assessmentin Tape Cast Ceramic Laminates. Ceramic Engineering and Science Proceedings. 1000-1007. 1994
- Tape Cast AI2O3/ZrO2 Composite Laminates. Ceramic Engineering and Science Proceedings. 873-880. 1994
- Effect of temperature on the mechanical behaviour of a SiC particulate reinforced Al alloy. 401-411. 1989
- RELIABILITY OF STRUCTURAL CERAMICS AT ELEVATED TEMPERATURES. 193-203. 1988
- The Influence of Spatial Distributions on Metallurgical Processes. 247-262. 1988
-
conferences
- A Method to Incorporate Grain Boundary Strength and its Effects on Plastic Deformation in FCC Polycrystals. IOP Conference Series: Materials Science and Engineering. 012026-012026. 2020
- In-situ Characterization of Microstructural Damage in QP980 Steel. Minerals, Metals and Materials Series. 443-450. 2018
- Application of X-ray tomography to the study of void growth and coalescence during ductile fracture. ICF 2017 - 14th International Conference on Fracture. 7-8. 2017
- From sintering to fracture: A short history of holes. ICF 2017 - 14th International Conference on Fracture. 5-6. 2017
- Effect of adhesive on fatigue property of Aural2 to AA5754 dissimilar aluminum alloy resistance spot welds. Engineering Failure Analysis. 57-65. 2016
- Impact of microstructure on void growth and linkage in pure magnesium. International Journal of Fracture. 31-47. 2016
- Characterization of Pore Defects and Fatigue Cracks in Die Cast AM60 Using 3D X-ray Computed Tomography. Metallurgical and Materials Transactions B. 1576-1585. 2015
- Fatigue Behavior of Dissimilar Aluminum Alloy Spot Welds. Procedia Engineering. 149-156. 2015
- Two-dimensional analysis of void growth and linkage during deformation. Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. 2424-2426. 2014
- Characterization of Damage in Magnesium Using Digital Image Correlation and Electron Backscattered Diffraction Patterning. Magnesium Technology. 111-114. 2014
- In situ damage examination during room temperature deformation of commercially pure magnesium using X-ray micro-computed tomography. Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. 1461-1465. 2013
- A Solar PV-Thermal Energy Design Optimization Study of a Building Footprint Limited Net-Zero Energy Facility. ASHRAE Transactions. 188-202. 2013
- Effect of plastic anisotropy on shear localization and fracture in automotive sheets. 13th International Conference on Fracture 2013, ICF 2013. 2789-2798. 2013
- Investigation of void linkage in magnesium using SEM and micro computed X-ray tomography. 13th International Conference on Fracture 2013, ICF 2013. 1019-1024. 2013
- Targeting a Net-Zero Energy Student Center: Part 1-Thermal and Electrical Load Minimization. ASHRAE Transactions. 276-283. 2012
- Targeting a Net-Zero Energy Student Center: Part 2-Systems to Meet Building Loads. ASHRAE Transactions. 284-291. 2012
- Inhomogeneous Deformation of AZ31 Magnesium Sheet in Uniaxial Tension. Magnesium Technology. 307-311. 2011
- Onset of void coalescence studied by X-ray computed tomography. TMS Annual Meeting. 343-350. 2010
- Failure Modes of Perforated Material Under Finite Deformation. Journal of Pressure Vessel Technology, Transactions of the ASME. 2008
- Shear Localization and Damage in AA5754 Aluminum Alloy Sheets. Journal of Materials Engineering and Performance. 395-401. 2008
- Modeling Strain Localization Using a Plane Stress Two-Particle Model and the Influence of Grain Level Matrix Inhomogeneity. Journal of engineering materials and technology. 2008
- Formability of an Automotive Aluminum Alloy-AA5754 CC. SAE Technical Papers. 2008
- 3D strain mapping inside materials by microstructural tracking in tomographic volumes. 1st Petroleum and Mineral Resources International Conference (Kurdistan, Iraq, 12/3-6/2012) Proceedings [WIT Transactions on. 177-186. 2007
- 3-D High-Density Strain Mapping Procedure Based on High-Resolution CT. Materials Science Forum. 2377-2382. 2007
- Modeling the influence of grain-level matrix inhomogeneity on strain localization in the presence of hard particles. Materials Science and Technology Conference and Exhibition, MS and T'07 - "Exploring Structure, Processing, and Applications Across Multiple Materials Systems". 1354-1368. 2007
- Three-Dimensional Measurement of Local Strain Distribution by Tracking Microstructural Features in High-Resolution SR-CT Image. Key Engineering Materials. 1153-1156. 2007
- Microscopic material characterization using SEM topography images correlation. Proceedings of the 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2006. 1389-1395. 2006
- The development of metal oxide based supercapacitors. TMS Annual Meeting. 377. 2006
- Elastic-Plastic Limit Analysis for Perforated Plates With Triangular Array of Circular Holes. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP. 379-385. 2006
- Failure Behaviour of Notched Sheet Specimen Under Plane Strain Deformation. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP. 27-32. 2006
- Heterogeneity in Plastic Deformation. Materials Science Forum. 85-92. 2006
- Investigation on Mechanism of Ductile Fracture of AA5754 Sheet. Materials Science Forum. 985-990. 2006
- Modeling the Role of Microstructure on Shear Instability with Reference to the Formability of Automotive Aluminium Alloys. Materials Science Forum. 183-190. 2006
- New Model Materials for Ductile Fracture Studies. Fracture of Nano and Engineering Materials and Structures - Proceedings of the 16th European Conference of Fracture. 129-130. 2006
- Modeling damage linkage in heterogeneous alloys and metal matrix composites. 11th International Conference on Fracture 2005, ICF11. 4223-4228. 2005
- Damage studies in heterogeneous aluminium alloys using X-ray tomography. Philosophical Magazine. 3191-3206. 2005
- Damage and Formability of AKDQ and High Strength DP600 Steel Tubes. SAE Technical Papers. 2005
- Experimental and FEA Investigation of Tensile Behaviour of High Strength Dual-Phase DP600 Steel. SAE Technical Papers. 2005
- Experimental and Numerical Study of Intense Shear Banding for Al-Alloy under Uniaxial Tension. Advanced Materials Research. 737-744. 2005
- Local Strain Measurement in a Strip Cast Automotive Aluminum Alloy Sheet. SAE Technical Papers. 2005
- Plastic Limit Analysis of Perforated Material Under Finite Deformation. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP. 275-280. 2005
- Multi-scale characterizations of shear localization in strip cast AA5754 aluminum alloy sheet. Materials Science and Technology. 249-258. 2004
- A Novel Approach for the Prediction of Shear Localization in Sheet Forming. AIP Conference Proceedings. 838-843. 2004
- Effects of applied stress on the oxidation kinetics of gamma-TiAl. AEROSPACE MATERIALS AND MANUFACTURING: DEVELOPMENT, TESTING, AND LIFE CYCLE ISSUES - HONORING WILLIAM WALLACE. 479-492. 2004
- Modeling of stresses induced by oxidation process. AEROSPACE MATERIALS AND MANUFACTURING: DEVELOPMENT, TESTING, AND LIFE CYCLE ISSUES - HONORING WILLIAM WALLACE. 465-477. 2004
- Processing and properties of nickel foams for battery electrodes. ADVANCED MATERIALS FOR ENERGY CONVERSION II. 345-345. 2004
- Effect of Fe content on ductility and bendability of AA5754 and AA6111. TMS Annual Meeting. 166-174. 2001
- Damage evolution in an AA6111/A1(2)O(3) composite. MATERIALS IN THE AUTOMOTIVE INDUSTRY. 411-422. 2001
- Effect of Fe content on ductility and bendability of AA5754 and AA6111. ALUMINUM 2001: PROCEEDINGS OF THE TMS 2001 ANNUAL MEETING ALUMINUM AUTOMOTIVE AND JOINING SYMPOSIA. 165-174. 2001
- Effect of superimposed pressure on the fracture behaviour of aluminum automotive alloys. ALUMINUM 2001: PROCEEDINGS OF THE TMS 2001 ANNUAL MEETING ALUMINUM AUTOMOTIVE AND JOINING SYMPOSIA. 17-29. 2001
- Evaluation of a model material for characterization of damage in an automotive aluminum alloy. MATERIALS IN THE AUTOMOTIVE INDUSTRY. 423-431. 2001
- Microstructure of twin-belt strip cast AA5754 aluminum alloy for automotive applications. MATERIALS IN THE AUTOMOTIVE INDUSTRY. 123-134. 2001
- On the mechanical behaviour of aluminum automotive alloys under superimposed pressure. MATERIALS IN THE AUTOMOTIVE INDUSTRY. 397-410. 2001
- Characterization of Bendability in Automotive Aluminum Alloy Sheets. Materials Science Forum. 583-588. 2000
- The influence of grain boundaries and interphase boundaries on the creep response of silicon nitride. Ceramic Transactions. 285-292. 2000
- Damage in Al alloys: Experiments and models. PROGRESS IN MECHANICAL BEHAVIOUR OF MATERIALS (ICM8), VOL 3. 1184-1185. 1999
- Effect of network formation on the creep of platelet-reinforced ceramics. CREEP BEHAVIOR OF ADVANCED MATERIALS FOR THE 21ST CENTURY. 23-29. 1999
- Role of particle distribution on damage leading to ductile fracture. Microstructural Science. 491-496. 1999
- Determination of Grain-Boundary Film Thickness by the Fresnel Fringe Imaging Technique. Journal of the European Ceramic Society. 2281-2286. 1998
- Controlled microstructures in Ni/NiO composites. Ceramic Transactions. 481-481. 1998
- The Application of Self-Consistent Approaches to Modeling Mechanical Behaviour of Heterogeneous Two Phase Solids. ADVANCED MULTILAYERED AND FIBRE-REINFORCED COMPOSITES. 153-162. 1998
- The role of heterogeneity on the flow and fracture of two-phase materials. Materials Science & Engineering: A. 145-154. 1997
- Ductility of an Al-Cu alloy produced by the powder metallurgy route. EUROMAT 97 - PROCEEDINGS OF THE 5TH EUROPEAN CONFERENCE ON ADVANCED MATERIALS AND PROCESSES AND APPLICATIONS: MATERIALS, FUNCTIONALITY & DESIGN, VOL 1. 361-364. 1997
- Effects of Porosity on the Superplastic Properties of Submicronic Alumina-Zirconia Composites. Materials Science Forum. 411-416. 1997
- Modelling of Damage in Particulate Metal Matrix Composites. Key Engineering Materials. 1167-1174. 1997
- Role of platelet orientation on the creep of silicon carbide platelet-reinforced alumina. EUROMAT 97 - PROCEEDINGS OF THE 5TH EUROPEAN CONFERENCE ON ADVANCED MATERIALS AND PROCESSES AND APPLICATIONS: MATERIALS, FUNCTIONALITY & DESIGN, VOL 2. 415-418. 1997
- The Role of Platelet Orientation on the Creep Behaviour of Al<sub>2</sub>O<sub>3</sub>/SiC Composites. Key Engineering Materials. 885-888. 1997
- Osteoconduction and bone bonding of calcium phosphates are distinct phenomena. Transactions of the Annual Meeting of the Society for Biomaterials in conjunction with the International Biomaterials Symposium. 417. 1996
- High Resolution Transmission Electron Microscope Investigations of Phases, Domains and Interfaces in Ti<sub>50.5</sub>Al<sub>46.5</sub>Cr<sub>3</sub>/TiB<sub>2</sub> Composites. Materials Science Forum. 313-316. 1996
- Microstructural Inhomogeneity and the Strength of Particulate Metal Matrix Composites. IUTAM Bookseries. 347-354. 1996
- Osteoconduction on, and bonding to, calcium phosphate ceramic implants. Materials Research Society Symposium - Proceedings. 147-156. 1996
- Structural Characterization of SiC Platelet-Reinforced Al<sub>2</sub>O<sub>3</sub> Matrix Composites before and after Creep Deformation. Materials Science Forum. 177-180. 1996
- The Influence of Particulate Spatial Distribution on Damage Accumulation in Metals and Ceramics. IUTAM Bookseries. 271-278. 1996
- DEFORMATION AND DAMAGE IN A PARTICULATE METAL MATRIX COMPOSITE. INTRINSIC AND EXTRINSIC FRACTURE MECHANISMS IN INORGANIC COMPOSITE SYSTEMS. 25-29. 1995
- CREEP MECHANISMS IN SILICON NITRIDE CERAMICS. TAILORING OF MECHANICAL PROPERTIES OF SI3N4 CERAMICS. 327-338. 1994
- Transient Viscous Phase Reaction Sintering (TVPRS) for the Fabrication of Silicon Oxynitride Ceramics. Key Engineering Materials. 229-236. 1994
- Microstructural design of platelet reinforced ceramics. European Physical Journal: Special Topics. 1889-1894. 1993
- Processing and Mechanical Properties of Alumina Platelet Reinforced Molybdenum Disilicide Laminates. Ceramic Engineering and Science Proceedings. 1199-1208. 1993
- CREEP AND DAMAGE PROCESSES IN MULTIPHASE CERAMIC MATERIALS. CRITICAL ISSUES IN THE DEVELOPMENT OF HIGH TEMPERATURE STRUCTURAL MATERIALS. 333-348. 1993
- TAPE CASTING OF PLATELET REINFORCED CERAMICS. DEVELOPMENTS AND APPLICATIONS OF CERAMICS AND NEW METAL ALLOYS. 377-386. 1993
- THE EFFECT OF INHOMOGENEOUS PARTICLE DISTRIBUTIONS ON THE MECHANICAL-PROPERTIES OF METAL-MATRIX COMPOSITES. DEVELOPMENTS AND APPLICATIONS OF CERAMICS AND NEW METAL ALLOYS. 217-228. 1993
- Creep Damage Mechanisms in Structural Ceramics. FRACTURE MECHANICS OF CERAMICS, VOL 10. 349-366. 1992
- Microstructural Characterisation of Microwave Sintered Silicon Nitride Ceramics. Materials Research Society Symposium - Proceedings. 289-294. 1992
- Transient Viscous Phase Reaction Sintered (Tvprs) Silicon Oxynitride Ceramics.. Materials Research Society Symposium - Proceedings. 381-386. 1992
- Creep Damage Mechanisms in Hot-Pressed Alumina. TOUGHENING MECHANISMS IN QUASI-BRITTLE MATERIALS. 235-247. 1991
- Tape Casting Using Fine Ceramic Powders. Materials Research Society Symposium - Proceedings. 305-310. 1991
- Creep mechanisms in silicon nitride at elevated temperatures. Proceedings of the Riso International Symposium on Metallurgy and Materials Science. 517-522. 1990
- Modelling the Influence of Microstructural Inhomogeneity on High Temperature Deformation and Fracture. CONSTITUTIVE LAWS OF PLASTIC DEFORMATION AND FRACTURE. 321-331. 1990
- THE ROLE OF INHOMOGENEOUS CAVITATION ON GRAIN-BOUNDARY CREEP FRACTURE. Journal of Metals. A35-A35. 1988
- HIGH-TEMPERATURE STABILITY IN STRUCTURAL CERAMICS. CIM Bulletin. 77-77. 1988
- DEFORMATION-ENHANCED GRAIN-GROWTH - THE EFFECT OF GRAIN-BOUNDARY SLIDING ON THE ZENER DRAG. Journal of Metals. A45-A45. 1987
- EFFECT OF TIME-DEPENDENT VOID DENSITY ON CREEP FRACTURE. Journal of Metals. A10-A10. 1987
- THRESHOLD STRESS BEHAVIOR IN THE CREEP OF ODS SUPERALLOYS. Journal of Metals. A11-A11. 1987
- HIGH-TEMPERATURE DAMAGE PROCESSES IN STRUCTURAL CERAMICS. CIM Bulletin. 103-103. 1987
- RELIABILITY OF STRUCTURAL CERAMICS IN SERVICE AT ELEVATED-TEMPERATURES. CIM Bulletin. 74-74. 1987
- CHARACTERIZATION OF CREEP CRACK GROWTH IN PRESSURE VESSEL STEELS.. 149-153. 1986
- STRAIN-ENHANCED GRAIN GROWTH DURING SUPERPLASTIC DEFORMATION.. 871-876. 1986
- Damage Accumulation in Hot Pressed Alumina During Flexural Creep and Anneals in Air. Fracture Mechanics of Ceramics. 311-326. 1986
- HIGH TEMPERATURE DAMAGE ACCUMULATION IN HOT PRESSED ALUMINA.. Journal de Physique. Colloque. 661-666. 1986
- ANALYSIS OF INCLUSION DISTRIBUTION OF HSLA STEELS. CIM Bulletin. 87-87. 1985
- Numerical Modelling of Creep Crack Growth. 1-12. 1985
- The Effect of Solute Distribution on Creep Fracture in a Ni Alloy. 43-52. 1985
- BEHAVIOUR OF SUPERPLASTIC MATERIALS AT LARGE STRAINS.. 223-233. 1984
- MODELS FOR CREEP CRACK GROWTH IN STEADY STATE AND TRANSIENT STRESS FIELDS.. 949-957. 1984
- A Numerical Study of Crack Tip Parameters in Creeping Solids. 183-196. 1984
- Models for Creep Crack Growth. Materials Science Research. 507-523. 1984
- VALIDITY OF CRACK TIP PARAMETERS IN CREEPING SOLIDS.. American Society of Mechanical Engineers (Paper). 1983
- A MODEL FOR STRAIN ENHANCED GRAIN-GROWTH DURING SUPERPLASTIC FLOW. Journal of Metals. A8-A8. 1983
- LARGE STRAIN BEHAVIOR DURING SUPERPLASTICITY. Journal of Metals. A8-A8. 1983
- DAMAGE ACCUMULATION DURING SUPERPLASTIC FLOW: THE ROLE OF INCLUSIONS.. 408. 1982
- A GENERAL-APPROACH TO THE MODELING OF HIGH-TEMPERATURE CRACK-GROWTH. CIM Bulletin. 110-110. 1982
- CAVITATION DURING SUPERPLASTIC DEFORMATION. Journal of Metals. 36-36. 1982
- COMPOSITIONAL EFFECTS ON THE CREEP DUCTILITY OF A LOW-ALLOY STEEL. Journal of Metals. 70-70. 1980
- INTERGRANULAR CRACK GROWTH AT HIGH TEMPERATURES.. Energy Technology Review. 321-327. 1980
- FINAL-STAGE DENSIFICATION OF (U,PU)O2. AMERICAN CERAMIC SOCIETY BULLETIN. 389-389. 1979
- The Development of Pressure Sintering Maps. Mater Sci Res. 473-492. 1975
-
journal articles
- Microstrain partitioning, transformation induced plasticity, and damage evolution of a third generation medium Mn advanced high strength steel. Materials Science & Engineering: A. 919:147447. 2025
- Microstrain partitioning, Transformation Induced Plasticity, and the evolution of damage during deformation of an austenitic-martensitic 1.5 GPa Quench and Partition steel. Materials Science & Engineering: A. 895:146181-146181. 2024
- In-situ investigation of damage mechanisms in duplex AlCoCrFeNi2.1 high entropy alloy. Materials Science & Engineering: A. 884:145532-145532. 2023
- The design of “Grain Boundary Engineered” architected cellular materials: The role of 5-7 defects in hexagonal honeycombs. Acta Materialia. 243:118513-118513. 2023
- The effect of vanadium on microstrain partitioning and localized damage during deformation of unnotched and notched DP1300 steels. International journal of plasticity. 158:103435-103435. 2022
- A novel approach to producing architectured ultra-high strength dual phase steels. Materials Science & Engineering: A. 833:142582-142582. 2022
- Accounting for the microstructure in the prediction of the fatigue life of injection moulded composites for automotive applications. Composite Structures. 255:112898-112898. 2021
- 4D X-ray tomography characterization of void nucleation and growth during deformation of strontium-added AZ31 alloys. Materials Science & Engineering: A. 797:140081-140081. 2020
- Effect of Stress Ratio on Fatigue Behaviour of Non-Crimp Fabric Composites at Room and Elevated Temperatures. Applied Composite Materials. 27:575-596. 2020
- Microstructural Evolution During Deformation of a QP980 Steel. Metallurgical and Materials Transactions A. 51:4524-4539. 2020
- In-situ X-ray tomography analysis of the evolution of pores during deformation of a Cu-Sn alloy fabricated by selective laser melting. Additive Manufacturing. 34:101196-101196. 2020
- Microstructural design for damage tolerance in high strength steels. Materials Letters. 269:127664-127664. 2020
- Multi-scale morphological characterization of Ni foams with directional pores. Materials Characterization. 158:109939-109939. 2019
- The role of microstructure on edge cracks in dual phase and quench and partitioning steels subject to severe cold rolling. Scripta Materialia. 173:86-90. 2019
- Anisotropy of mechanical properties and crystallographic texture in hot rolled AZ31+XSr sheets. Journal of Magnesium and Alloys. 7:466-473. 2019
- Microstructural analysis of ductility and fracture in fine-grained and ultrafine-grained vanadium-added DP1300 steels. International journal of plasticity. 117:58-70. 2019
- Influence of Vanadium on Microstrain Partitioning and Evolution of Microstructural Damage in DP1300 Steel 2018
- A decision support approach to value flexibility considering uncertainty and future information. Journal of Petroleum Science and Engineering. 167:88-99. 2018
- Effective approaches towards microstructural strain mapping of AZ31B Mg sheet material using digital image correlation. Optics and Lasers in Engineering. 102:17-25. 2018
- VALIDATION OF THE DUAL-PHASE STEEL FAILURE MODEL AT THE MICROSCALE. International Journal for Multiscale Computational Engineering. 15:443-458. 2017
- Effects of void band orientation and crystallographic anisotropy on void growth and coalescence. Journal of the Mechanics and Physics of Solids. 95:270-283. 2016
- On the damage and fracture of commercially pure magnesium using x-ray microtomography. Materials Science & Engineering: A. 676:146-155. 2016
- Effects of void fraction on void growth and linkage in commercially pure magnesium. Acta Materialia. 113:68-80. 2016
- The Effect of Porosity on Fatigue of Die Cast AM60. Metallurgical and Materials Transactions A. 47:3464-3472. 2016
- 2D and 3D characterization of pore defects in die cast AM60. Materials Characterization. 114:254-262. 2016
- The effect of microstructure on damage and fracture in AZ31B and ZEK100 magnesium alloys. Materials Science & Engineering: A. 658:33-41. 2016
- Fuel cap stamping simulation of AA5754 sheets using a microstructure based macro-micro multi-scale approach. Computational Materials Science. 98:354-365. 2015
- Influence of the restored work-hardening rate on ductility studied by X-ray computed tomography. Philosophical Magazine Letters. 93:379-386. 2013
- Microstructural Aspects of Damage and Fracture in AZ31 Sheet Materials. Journal of Materials Engineering and Performance. 22:1386-1395. 2013
- Void growth and coalescence in model materials investigated by high-resolution X-ray microtomography. International Journal of Fracture. 181:51-66. 2013
- Effect of inhomogeneous deformation on anisotropy of AZ31 magnesium sheet. Materials Science & Engineering: A. 567:101-109. 2013
- Onset of void coalescence in uniaxial tension studied by continuous X-ray tomography. Acta Materialia. 61:1021-1036. 2013
- Design of an in situ mechanical test for spot-welded joints. Engineering Fracture Mechanics. 96:528-538. 2012
- Effect of Mg content on Portevin–Le Chatelier band strain in Al–Mg sheet alloys. Philosophical Magazine Letters. 92:647-655. 2012
- Strain localization and damage development during bending of Al–Mg alloy sheets. Materials Science & Engineering: A. 550:395-407. 2012
- Effect of triaxiality on void growth and coalescence in model materials investigated by X-ray tomography. Acta Materialia. 60:2829-2839. 2012
- Deformation inhomogeneity in large-grained AA5754 sheets. Materials Science & Engineering: A. 528:4187-4198. 2011
- Inhomogeneous Deformation of AZ31 Magnesium Sheet in Uniaxial Tension. Magnesium Technology. 307-311. 2011
- The impact of particle distributions and grain-level inhomogeneities on post-necking deformation and fracture in AA5754 sheet alloys during uniaxial tension. Materials Science & Engineering: A. 528:2002-2016. 2011
- OS05-2-2 Influences of stress triaxiality and work hardening on void growth and coalescence studied by X-ray tomography. The Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics. 2011.10:_os05-2-2-. 2011
- OS05-4-1 Application of X-ray tomography to the study of void growth and coalescence during ductile fracture. The Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics. 2011.10:_os05-4-1-. 2011
- A parametric finite element study and an analytical model of particle distributions on post-necking deformation and failure mode in AA5754 aluminum alloy sheets. International Journal of Fracture. 164:167-183. 2010
- A macro–micro-multi-level modeling scheme to study the effect of particle distribution on wrap-bendability of AA5754 sheet alloys. Journal of Materials Processing Technology. 210:1232-1242. 2010
- Anelastic Behavior Modeling of SiC Whisker‐Reinforced Al2O3. Journal of The American Ceramic Society. 93:857-864. 2010
- Oxide scales formation in nano-crystalline TiAlCrSiYN PVD coatings at elevated temperature. International Journal of Refractory Metals and Hard Materials. 28:133-141. 2010
- Studies of Texture Gradients in the Localized Necking Band of AA5754 by EBSD and Microstructure-Based Finite Element Modeling. Computers, Materials and Continua. 14:99-123. 2009
- Studies of texture gradients in the localized necking band of AA5754 by EBSD and microstructure-based finite element modeling. Computers, Materials and Continua. 14:97-121. 2009
- Void Nucleation and Growth in Dual-Phase Steel 600 during Uniaxial Tensile Testing. Metallurgical and Materials Transactions A. 40:3117-3127. 2009
- Effect of martensite distribution on damage behaviour in DP600 dual phase steels. Materials Science & Engineering: A. 516:7-16. 2009
- The influence of particle shape, volume fraction and distribution on post-necking deformation and fracture in uniaxial tension of AA5754 sheet materials. International Journal of Solids and Structures. 46:2650-2658. 2009
- Effect of surface finish on high temperature fatigue of a nickel based super alloy. International Journal of Fatigue. 31:743-750. 2009
- Microstructure-based finite element analysis of strain localization behavior in AA5754 aluminum sheet. Acta Materialia. 56:3187-3201. 2008
- Observation of void nucleation, growth and coalescence in a model metal matrix composite using X-ray tomography. Materials Science & Engineering: A. 488:435-445. 2008
- On the Calculation of Volume Fraction of Texture Components in AA5754 Sheet Materials. Metallurgical and Materials Transactions A. 39:2007-2013. 2008
- Constitutive Behavior of AA5754 Sheet Materials at Large Strains. Journal of engineering materials and technology. 130. 2008
- Visualization by X-ray tomography of void growth and coalescence leading to fracture in model materials. Acta Materialia. 56:2919-2928. 2008
- High-density three-dimensional mapping of internal strain by tracking microstructural features. Acta Materialia. 56:2167-2181. 2008
- Experimental investigation of void coalescence in metallic sheets containing laser drilled holes. Acta Materialia. 56:1774-1784. 2008
- Laser drilling of high aspect ratio holes in copper with femtosecond, picosecond and nanosecond pulses. Applied Physics A: Materials Science and Processing. 90:537-543. 2008
- Modeling the influence of grain-level matrix inhomogeneity on strain localization in the presence of hard particles. Modelling and Simulation in Materials Science and Engineering. 15:893-909. 2007
- Numerical simulations of void linkage in model materials using a nonlocal ductile damage approximation. International Journal of Fracture. 148:205-219. 2007
- A Unified Finite Element Approach for the Study of Postyielding Deformation Behavior of Formable Sheet Materials. Journal of Pressure Vessel Technology, Transactions of the ASME. 129:689-697. 2007
- Ripple formation during deep hole drilling in copper with ultrashort laser pulses. Applied Physics A: Materials Science and Processing. 89:1001-1003. 2007
- In-situ measurement of local strain partitioning in a commercial dual-phase steel. International Journal of Materials Research. 98:664-673. 2007
- The Portevin–Le Chatelier (PLC) effect and shear band formation in an AA5754 alloy. Acta Materialia. 55:4151-4160. 2007
- Digital image correlation studies for microscopic strain distribution and damage in dual phase steels. Scripta Materialia. 56:999-1002. 2007
- Effect of processing route on the spatial distributions of constituent particles and their role in the fracture process in AA5754 alloy sheet materials. Materials Science & Engineering: A. 456:85-92. 2007
- Creep-driven nitride scale growth in γ-TiAl. Acta Materialia. 55:251-260. 2007
- Investigation of whisker orientation in SiC whisker-reinforced alumina composites using neutron diffraction. Journal of the European Ceramic Society. 27:389-396. 2007
- Measurement of 3-D Strain Distribution by means of High-Resolution X-ray CT Image and Tracking of Microstructural Features. Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 71:181-186. 2007
- Modeling the interaction between creep deformation and scale growth process. Acta Materialia. 55:189-201. 2007
- OS3-1-2 Measurement of 3-D strain distribution based on tracking of microstructural features in high-resolution SR-CT image. The Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics. 2007.6:_os3-1-2-1-_os3-1-2-6. 2007
- Three-Dimensional Structure of Portevin-Le Chatelier Bands and Shear Bands in Strip Cast AA5754 Sheets Using Digital Image Correlation. SAE Technical Papers. 1. 2007
- Development of a heterogeneous microstructurally based finite element model for the prediction of forming limit diagram for sheet material. Metallurgical and Materials Transactions A. 37:3489-3501. 2006
- Femtosecond laser-based fabrication of a new model material to study fracture. Applied Physics A: Materials Science and Processing. 86:55-61. 2006
- The influence of particle distribution and volume fraction on the post-necking behaviour of aluminium alloys. Mechanics of Materials. 38:1026-1038. 2006
- 2D and 3D Visualization of Ductile Fracture. Advanced Engineering Materials. 8:469-472. 2006
- Oxidation resistant Ti-Al-Cr alloy for protective coating applications. Intermetallics. 14:189-197. 2006
- A model for the effect of creep deformation and intrinsic growth stress on oxide/nitride scale growth rates with application to the nitridation of γ-TiAl. Materials Science & Engineering: A. 415:94-103. 2006
- On the sequence of inhomogeneous deformation processes occurring during tensile deformation of strip cast AA5754. Acta Materialia. 54:209-218. 2006
- Effect of asymmetric rolling on the texture and mechanical properties of AA6111-aluminum sheet. Metallurgical and Materials Transactions A. 36:3141-3149. 2005
- Investigation of Anelastic Creep Recovery in SiC Whisker‐Reinforced Alumina Composites. Journal of The American Ceramic Society. 88:3104-3109. 2005
- Preface. Philosophical Magazine. 85:2977-2978. 2005
- Effect of type-B Portevin–Le Chatelier bands on the onset of necking in uniaxial tension of strip cast AA5754 sheets. Scripta Materialia. 53:499-503. 2005
- Microscopic Strain Mapping Using Scanning Electron Microscopy Topography Image Correlation at Large Strain. Journal of Strain Analysis for Engineering Design. 40:559-570. 2005
- Cathodic electrodeposition of cobalt oxide films using polyelectrolytes. Materials Chemistry and Physics. 91:391-398. 2005
- Effect of substrate pre-coating on adhesion of sintered nickel plaques for electrode application in rechargeable batteries. Journal of Power Sources. 142:370-381. 2005
- Prediction of shear localization during large deformation of a continuous cast Al–Mg sheet. Materials Science & Engineering: A. 394:192-203. 2005
- A model for damage coalescence in heterogeneous multi-phase materials. Acta Materialia. 52:5255-5263. 2004
- CVD Technique for Inco Nickel Foam Production. Advanced Engineering Materials. 6:454-459. 2004
- Effect of thermomechanical treatment on the evolution of rolling and recrystallization textures in twin-belt cast AA5754 aluminum alloy. Metallurgical and Materials Transactions A. 35:1839-1851. 2004
- Modeling of oxidation-induced growth stresses. Scripta Materialia. 50:1475-1479. 2004
- Effect of thermomechanical processing on grain structure development in a twin-belt strip cast automotive aluminum alloy. Metallurgical and Materials Transactions A. 35:949-952. 2004
- Tensile properties and bendability of T4 treated AA6111 aluminum alloys. Materials Science & Engineering: A. 369:258-266. 2004
- The role of chromium in protective alumina scale formation during the oxidation of ternary TiAlCr alloys in air. Intermetallics. 12:165-180. 2004
- Strength and ductility of as-plated and sintered CVD nickel foams. Composites Science And Technology. 63:2317-2329. 2003
- The preparation of highly porous structures from filamentary nickel powders. Journal of Power Sources. 123:253-260. 2003
- A self-consistent approach to modeling strain gradient plasticity. Scripta Materialia. 49:53-57. 2003
- Tensile and bending properties of AA5754 aluminum alloys. Materials Science & Engineering: A. 316:52-59. 2001
- Effect of particle distribution on deformation and damage of two-phase alloys. Materials Science & Engineering: A. 317:108-114. 2001
- Thickness Alteration of Grain‐Boundary Amorphous Films during Creep of a Multiphase Silicon Nitride Ceramic. Journal of The American Ceramic Society. 84:1296-1300. 2001
- Sintering and Microstructure Modification of Mullite/Zirconia Composites Derived from Silica‐Coated Alumina Powders. Journal of The American Ceramic Society. 84:850-858. 2001
- Modeling the mechanical behaviour of heterogeneous multi-phase materials. Progress in Materials Science. 46:379-405. 2001
- Phase Evolution During Sintering of Mullite/zirconia Composites Using Silica-coated Alumina Powders. Journal of Materials Research. 15:1358-1366. 2000
- Stress Development Due to Capillary Condensation in Powder Compacts: A Two‐Dimensional Model Study. Journal of The American Ceramic Society. 83:1333-1340. 2000
- A model for the mechanical behaviour of highly concentrated composites. Scripta Materialia. 42:313-318. 2000
- Processing and microstructural characterization of Al-Cu alloys produced from rapidly solidified powders. Metallurgical and Materials Transactions A. 31:249-260. 2000
- A model for viscous flow creep in ceramics containing secondary crystalline phases. Scripta Materialia. 41:1169-1175. 1999
- The contribution of viscous flow to creep deformation of silicon nitride. Materials Science & Engineering: A. 271:257-265. 1999
- Effect of particle clustering on the strengthening versus damage rivalry in particulate reinforced elastic plastic materials: A 3-D analysis from a self-consistent modelling. European Journal of Mechanics, A/Solids. 18:785-804. 1999
- High‐Resolution Electron Microscopy Investigation of Viscous Flow Creep in a High‐Purity Silicon Nitride. Journal of The American Ceramic Society. 82:1492-1496. 1999
- A model for damage in a clustered particulate composite. Materials Science & Engineering: A. 262:264-270. 1999
- Settling of multisized clusters of alumina particles in liquid aluminum. Metallurgical and Materials Transactions B. 30:241-247. 1999
- Whiff compliments. The Chemical Engineer: the essential magazine for the chemical and process industries. 23-23. 1999
- Ductilization of a powder metallurgy Al-17 wt pct Cu by means of channel-die compression and extrusion. Metallurgical and Materials Transactions A. 29:2613-2620. 1998
- Monte carlo simulation of clustering of alumina particles in turbulent liquid aluminum. Metallurgical and Materials Transactions B. 29:785-791. 1998
- Ceramic education at McMaster University. Canadian Ceramics Quarterly - Journal of the Canadian Ceramic Soceity. 67:15-16. 1998
- Combustion synthesis and mechanical properties of molybdenum disilicide composites reinforced with SiC particulate. Journal of Materials Science. 33:2319-2330. 1998
- Creep Mechanisms in Multiphase Ceramic Materials. Journal of The American Ceramic Society. 81:275-299. 1998
- Creep and anelastic recovery of whisker- and platelet-reinforced ceramics. Acta Materialia. 46:1357-1369. 1998
- Role of damage on the flow and fracture of particulate reinforced alloys and metal matrix composites. Acta Materialia. 45:5261-5274. 1997
- Redistribution of a Grain‐Boundary Glass Phase during Creep of Silicon Nitride Ceramics. Journal of The American Ceramic Society. 80:685-691. 1997
- Three-dimensional analysis of the creep due to a viscous grain boundary phase. Acta Materialia. 45:1259-1273. 1997
- High-resolution transmission electron microscopy investigation of a stacking fault in beta-Si3N4. Journal of Materials Science. 32:1431-1436. 1997
- Microstructural aspects of superplastic deformation of Al2O3/ZrO2 laminate composites. Materials Science & Engineering: A. 219:148-155. 1996
- Fabrication of Ni-NiO composites by tape casting. Industrial Heating. 63:85-87. 1996
- Plastic flow and fracture of a particulate metal matrix composite. Acta Materialia. 44:3465-3476. 1996
- Compositional dependence of creep behaviour in silicon nitride ceramics. Canadian Ceramics. 65:211-214. 1996
- The tensile properties of a particulate reinforced Al alloy in the temperature range - 196-300°C. Canadian Metallurgical Quarterly. 35:189-198. 1996
- The Tensile Properties of a Particulate Reinforced Al Alloy in the Temperature Range −196–300°C. Canadian Metallurgical Quarterly. 35:189-198. 1996
- The Bauschinger effect in a particulate reinforced Al alloy. Materials Science & Engineering: A. 207:1-11. 1996
- Bioceramic materials with controlled porosity for bone implant applications. Canadian Ceramics. 65:19-20. 1996
- Influence of ZrO2 addition on melting kinetics of a YSiAlO glass-ceramic. Journal of the European Ceramic Society. 16:1245-1251. 1996
- Influence of a damage zone on high temperature crack growth in brittle materials. Acta Materialia. 43:3937-3945. 1995
- MoSi2‐Based Sandwich Composite Made by Tape Casting. Journal of The American Ceramic Society. 78:2967-2972. 1995
- Microstructural characterization of a microwave-sintered silicon nitride based ceramic. Journal of Materials Research. 10:1387-1396. 1995
- Strength of Tape Cast and Laminated Ceramics. Journal of The American Ceramic Society. 78:1580-1584. 1995
- Processing and Properties of Alumina‐Graphite Platelet Composites. Journal of The American Ceramic Society. 78:1198-1200. 1995
- Synthesis and processing of hydroxyapatite ceramic tapes with controlled porosity. Journal of Materials Science: Materials in Medicine. 6:19-23. 1995
- Chemistry and sintering behaviour of thin hydroxyapatite ceramics with controlled porosity. Biomaterials. 16:403-408. 1995
- A simplified welding arc model by the finite element method. Computers & structures. 53:1235-1241. 1994
- Processing of Tape–Cast Laminates Prepared from Fine Alumina/Zirconia Powders. Journal of The American Ceramic Society. 77:2145-2153. 1994
- Tape Casting of Fine Alumina/Zirconia Powders for Composite Fabrication. Journal of The American Ceramic Society. 77:2137-2144. 1994
- Influence of matrix strength and damage accumulation on the mechanical response of a particulate metal matrix composite. Acta Materialia. 42:1329-1335. 1994
- Low strain plasticity in a particulate metal matrix composite. Acta Materialia. 42:1319-1327. 1994
- The influence of particle distribution on the mechanical response of a particulate metal matrix composite. Acta Materialia. 42:1311-1318. 1994
- Creep Behavior of a Sintered Silicon Nitride. Journal of The American Ceramic Society. 76:385-396. 1993
- Microstructural Evolution in Annealed and Crept Silicon Nitride. Journal of The American Ceramic Society. 76:376-384. 1993
- Microstructural design of platelet reinforced ceramics. European Physical Journal: Special Topics. 3:1889-1894. 1993
- Crystallization of Yttria–Alumina–Silica Glasses. Journal of The American Ceramic Society. 75:3315-3320. 1992
- Finite element modeling of transient heat transfer and microstructural evolution in welds: Part II. Modeling of grain growth in austenitic stainless steels. Metallurgical and Materials Transactions B. 23:841-845. 1992
- Creep Due to a Non‐Newtonian Grain Boundary Phase. Journal of The American Ceramic Society. 75:2327-2334. 1992
- Creep mechanisms in glass-containing ceramics. EPJ Applied Physics. 1:1131-1139. 1991
- Creep and Creep Fracture in Hot‐Pressed Alumina. Journal of The American Ceramic Society. 74:915-921. 1991
- Damage and Fracture Mechanisms During High‐Temperature Creep in Hot‐Pressed Alumina. Journal of The American Ceramic Society. 74:922-933. 1991
- Effect of cyclic deformation on strain enhanced grain growth during superplastic flow. Materials Science and Technology. 5:999-1004. 1989
- Creep deformation due to a viscous grain boundary phase. Acta Metallurgica. 37:2007-2015. 1989
- The effect of a non uniform void distribution on grain boundary void growth during creep. Acta Metallurgica. 36:2055-2063. 1988
- Effect of Devitrification on Creep Deformation in Glass‐Containing Ceramics. Journal of The American Ceramic Society. 71:562-565. 1988
- Creep crack growth simulation under transient stress fields. Metallurgical and Materials Transactions A. 19:829-835. 1988
- A Pressure-sintering Model for the Densification of Polar Firn and Glacier Ice. Journal of Glaciology. 34:40-45. 1988
- The effect of time-dependent void density on grain boundary creep fracture—II. Continuous nucleation. Acta Metallurgica. 35:2791-2799. 1987
- The effect of time dependent void density on grain boundary creep fracture—i. continuous void coalescence. Acta Metallurgica. 35:1251-1259. 1987
- Mechanism of plastic void growth during superplastic flow. Materials Science and Technology. 2:1086-1092. 1986
- Superplastic behavior of a zn-22 pct ai-0.5 pct cu alloy. Metallurgical and Materials Transactions A. 17:1873-1875. 1986
- Threshold stresses for dislocation climb over hard particles: The effect of an attractive interaction. Acta Metallurgica. 34:1893-1898. 1986
- HIGH TEMPERATURE DAMAGE ACCUMULATION IN HOT PRESSED ALUMINA. Journal de Physique. Colloque. 47:661-666. 1986
- On the stress and strain fields ahead of a stationary crack in creeping solids. Engineering Fracture Mechanics. 21:315-328. 1985
- On the mechanism of strain-enhanced grain growth during superplastic deformation. Acta Metallurgica. 32:1335-1345. 1984
- An evaluation of available data for strain-enhanced grain growth during superplastic flow. Journal of Materials Science. 3:395-399. 1984
- Large strain behaviour of a superplastic copper alloy—I. Deformation. Acta Metallurgica. 32:415-422. 1984
- Large strain behaviour of a superplastic copper alloy—II. Cavitation and fracture. Acta Metallurgica. 32:423-434. 1984
- Mechanisms of hot-isostatic pressing. Acta Metallurgica. 31:1829-1840. 1983
- Grain growth at low strain rates in a superplastic Cu alloy. Scripta Metallurgica. 16:1363-1365. 1982
- The propagation of cracks by cavitation: A general theory. Acta Metallurgica. 30:1723-1732. 1982
- A model for creep cracking by diffusion-controlled void growth. IOP Conference Series: Materials Science and Engineering. 49:31-39. 1981
- Compositional effects on the creep ductility of a low alloy steel. Metallurgical and Materials Transactions A. 11:1827-1836. 1980
- STRESS ANALYSIS OF A MICROVOID AHEAD OF A CRACK.. Res Mechanica: International Journal of Structural Mechanics and Materials Science. 1:101-108. 1980
- Final-stage densification of mixed oxide fuels. Journal of Nuclear Materials. 80:348-355. 1979
- MECHANISM MAPPING OF SINTERING UNDER AN APPLIED PRESSURE.. Sci Sintering. 10:67-76. 1978
- Pressure sintering by power law creep. Acta Metallurgica. 23:1277-1285. 1975
- Reply to discussion on “The rate of shrinkage during the initial stage of sintering” by J.H. Rosolowski. Scripta Metallurgica. 9:599-601. 1975
- Contribution of grain boundary diffusion and capillarity forces to the diffusional creep of wires or fibers. Metallurgical and Materials Transactions A. 6:265-270. 1975
- The rate of shrinkage during the initial stage of sintering. Scripta Metallurgica. 8:xxi-xxii. 1974
-
preprints
-
reports