selected scholarly activity
-
conferences
- Preparation of cross-linked canola protein films by wet casting and compression method. AIP Conference Proceedings. 2024
- Application of Economic Model Predictive Control on a Lab Scale Rotomolding Process. Proceedings of the American Control Conference. 2485-2490. 2022
- A RECYCLE STREAM IN THE REACTIVE EXTRUSION PROCESS FOR PREPARING LIGNOCELLULOSIC THERMOPLASTIC. Annual Technical Conference - ANTEC, Conference Proceedings. 2022
- Data-Driven Control of Rotational Molding Process. Proceedings of the American Control Conference. 5117-5122. 2019
- Nanoparticle production by solvent-free extrusion emulsification. Annual Technical Conference - ANTEC, Conference Proceedings. 2019
- Modification of PLA for improved layer-to-layer adhesion in 3-D printed parts. Annual Technical Conference - ANTEC, Conference Proceedings. 2018
- Quality monitoring of rotational molded parts using a nondestructive technique. Annual Technical Conference - ANTEC, Conference Proceedings. 2018
- Use of Thermography and Ultrasound for the Quality Control of SMC Lightweight Material Reinforced by Carbon Fiber Tapes. Procedia CIRP. 33-38. 2017
- Dynamic rheological measurements of aqueous polyester dispersion in batch reactor and twin screw extruder. Annual Technical Conference - ANTEC, Conference Proceedings. 710-714. 2016
- Heat activated dry granulation within the twin screw granulator. Annual Technical Conference - ANTEC, Conference Proceedings. 766-771. 2016
- Studying polymer particle sintering with an automated imaging system. Annual Technical Conference - ANTEC, Conference Proceedings. 1698-1703. 2016
- Comparing monolayer versus bilayer rotational molded polyethylene storage tanks for long-term biodiesel storage. Annual Technical Conference - ANTEC, Conference Proceedings. 2394-2399. 2014
- Morphological development of latex particles in a solvent-free extrusion process. Annual Technical Conference - ANTEC, Conference Proceedings. 1169-1174. 2014
- The role of rheology in non-pressurized polymer foaming systems. Annual Technical Conference - ANTEC, Conference Proceedings. 2584-2589. 2014
- Effect of biodiesel addition on microbial population in diesel storage tanks. NACE - International Corrosion Conference Series. 2013
- Rheological effects on foam processing in rotational molding. Annual Technical Conference - ANTEC, Conference Proceedings. 2767-2772. 2011
- Exfoliation aids for preparation of polymer-layered silicate nanocomposites. Annual Technical Conference - ANTEC, Conference Proceedings. 547-552. 2011
- Understanding thermally induced wrinkling in decorative film laminated sheets. Annual Technical Conference - ANTEC, Conference Proceedings. 867-871. 2011
- Thermoplastic potato starch blends and bioplastic films. Annual Technical Conference - ANTEC, Conference Proceedings. 1463-1467. 2010
- Twin screw extrusion of thermoplastic potato starch. Annual Technical Conference - ANTEC, Conference Proceedings. 1136-1140. 2010
- Biaxial forming behavior of decorative film laminates. Annual Technical Conference - ANTEC, Conference Proceedings. 421-425. 2010
- Cohesion-driven recirculation of a polymer solids bed in a screw simulator. Annual Technical Conference - ANTEC, Conference Proceedings. 142-146. 2009
- Aspects of screw design for wet granulation extrusion. AIChE Annual Meeting Conference Proceedings. 2008
- Supercritical carbon dioxide as art exfoliating agent in the preparation of a layered silicate polymer nanocomposite. Automotive TPO Global Conference, TPO Conference 2008. 428-435. 2008
- Mechanical Properties Associated with the Interface of a Co-injection Molded Structural TPO Foam. SAE Technical Papers. 2008
- Influence of supercritical carbon dioxide on the morphology of modified clays. AIChE Annual Meeting Conference Proceedings. 2007
- Impact of foaming on electrical conductivity and fiber orientation of coc/carbon fiber composites in injection molding. Annual Technical Conference - ANTEC, Conference Proceedings. 1427-1431. 2007
- Solids compaction and conveying in a single-screw extruder by discrete particle modeling. Annual Technical Conference - ANTEC, Conference Proceedings. 424-428. 2007
- Effect of foaming on fiber orientation and electrical conductivity of polymer carbon fiber composites in injection molding. AIChE Annual Meeting Conference Proceedings. 2006
- Plastic contact mechanics and its impact on DEM simulations of solds transport in extruders. Annual Technical Conference - ANTEC, Conference Proceedings. 882-886. 2006
- Rheology studies of two-phase gas-polymer suspensions during mold filling. Annual Technical Conference - ANTEC, Conference Proceedings. 2371-2375. 2006
- Rheological Comparison of Chemical and Physical Blowing Agents in a Thermoplastic Polyolefin. Industrial & Engineering Chemistry Research. 2734-2740. 2006
- Reduced fiber breakage in an injection molding machine. Annual Technical Conference - ANTEC, Conference Proceedings. 266-270. 2005
- Study of the micropelletization process. Annual Technical Conference - ANTEC, Conference Proceedings. 278-282. 2003
- An experimental comparison of the improved mixing obtained from a new barrier screw design. TAPPI - Polymers, Laminations and Coatings Conference. 523-528. 2001
- Maleation of EPDM through reactive extrusion. CONFERENCE PROCEEDINGS AT ANTEC '98: PLASTICS ON MY MIND, VOLS I-3. 1744-1748. 1998
- Functionalization of terminal double bonds in polypropylene. ANTEC'97 - PLASTICS SAVING PLANET EARTH, CONFERENCE PROCEEDINGS, VOLS 1 - 3. 2981-2985. 1997
-
journal articles
- Examining particle size growth in twin screw granulation up to steady state with acoustic emissions. Powder Technology. 448:120294. 2024
- Image based Modeling and Control for Batch Processes. Journal of Process Control. 143:103314. 2024
- Effect of leucine as an aerosolization enhancer on the bioactivity of spray dried viral-vectored vaccines for inhalation. RSC Pharmaceutics. 1:775-785. 2024
- Transient dynamics of polymer emulsification inside a twin-screw extruder: effect on process stability and particle size distribution. Polymer Bulletin. 81:8765-8781. 2024
- Utilizing Neural Networks for Image-based Model Predictive Controller of a batch Rotational Molding process. IFAC-PapersOnLine. 58:470-475. 2024
- Lignocellulosic biomass pretreatment: Industrial oriented high-solid twin-screw extrusion method to improve biogas production from forestry biomass resources. Bioresource Technology. 393:130000-130000. 2024
- Understanding environmental stress cracking in the Bell Test at the notch region. Polymer Engineering and Science. 64:264-278. 2024
- Flexible nanoscale co‐continuous structures prepared by controlled crazing of ethylene‐octene elastomers and in‐situ polymerization of conductive networks. Canadian Journal of Chemical Engineering. 101:4832-4844. 2023
- Internal microstructure of spray dried particles affects viral vector activity in dry vaccines. International Journal of Pharmaceutics. 640:122988-122988. 2023
- Considering inelasticity in the real-time monitoring of particle size for twin-screw granulation via acoustic emissions. International Journal of Pharmaceutics. 639:122949-122949. 2023
- Design Considerations for Intratracheal Delivery Devices to Achieve Proof-of-Concept Dry Powder Biopharmaceutical Delivery in Mice. Pharmaceutical Research. 40:1165-1176. 2023
- Improving the consistency of environmental stress cracking resistance testing for polyethylenes. Polymer Engineering and Science. 63:478-488. 2023
- Corrigendum: Differential biodistribution of adenoviral-vectored vaccine following intranasal and endotracheal deliveries leads to different immune outcomes. Frontiers in Immunology. 14:1151809. 2023
- Developing a supervised machine‐learning model capable of distinguishing fiber orientation of polymer composite samples nondestructively tested using active ultrasonics. Journal of Advanced Manufacturing and Processing. 5. 2023
- Adaptive Predictive Control Algorithm for Batch Processes: Application to a Rotational Molding Process. Industrial & Engineering Chemistry Research. 61:17572-17581. 2022
- Corrigendum to “Screening amino acid additives as aerosolization modifiers for spray dried inhalable viral-vectored vaccines” [J. Drug Discov. Sci. Technol. 76 (2022) 1773–2247/103815]. Journal of Drug Delivery Science and Technology. 78:103926-103926. 2022
- Screening amino acid additives as aerosolization modifiers for spray dried inhalable viral-vectored vaccines. Journal of Drug Delivery Science and Technology. 76:103815-103815. 2022
- Dextran Mass Ratio Controls Particle Drying Dynamics in a Thermally Stable Dry Powder Vaccine for Pulmonary Delivery. Pharmaceutical Research. 39:2315-2328. 2022
- Design and application of data driven economic model predictive control for a rotational molding process. Computers and Chemical Engineering. 161:107713-107713. 2022
- Cryoprotective agents influence viral dosage and thermal stability of inhalable dry powder vaccines. International Journal of Pharmaceutics. 617:121602-121602. 2022
- Aerosol delivery, but not intramuscular injection, of adenovirus-vectored tuberculosis vaccine induces respiratory-mucosal immunity in humans. JCI insight. 7:e155655. 2022
- Differential Biodistribution of Adenoviral-Vectored Vaccine Following Intranasal and Endotracheal Deliveries Leads to Different Immune Outcomes. Frontiers in Immunology. 13:860399. 2022
- Predicting the particle size distribution in twin screw granulation through acoustic emissions. Powder Technology. 394:757-766. 2021
- Solvent-free production of thermoplastic lignocellulose from wood pulp by reactive extrusion. Carbohydrate Polymers. 270:118361-118361. 2021
- Process Intensification of Thermoplastic Lignocellulose Production through High-Solids Reactive Extrusion Enabled by a Novel Recycle Loop. Industrial & Engineering Chemistry Research. 60:13886-13894. 2021
- Validation of a diffusion-based single droplet drying model for encapsulation of a viral-vectored vaccine using an acoustic levitator. International Journal of Pharmaceutics. 605:120806-120806. 2021
- Flexible Conductive Substrate Incorporating a Submicrometer Co-continuous Polyaniline Phase within Polyethylene by Controlled Crazing. ACS Applied Polymer Materials. 3:1880-1889. 2021
- Solvent-free modification of lignocellulosic wood pulp into a melt-flowable thermoplastic. Cellulose. 28:1055-1069. 2021
- Spray dried VSV-vectored vaccine is thermally stable and immunologically active in vivo. Scientific Reports. 10:13349. 2020
- Effect of Shear Stresses on Adenovirus Activity and Aggregation during Atomization To Produce Thermally Stable Vaccines by Spray Drying. ACS Biomaterial Science and Engineering. 6:4304-4313. 2020
- Innovating continuous twin-screw granulation with foam delivery. Pharmaceutical Technology. 44:30-33. 2020
- Investigating the Synergistic Anionic/Nonionic Surfactant Interaction on Nanoparticle Synthesis with Solvent-Free Extrusion Emulsification. Industrial & Engineering Chemistry Research. 59:9787-9796. 2020
- Developing Continuous Submicron-Scale Conductive Interpenetrating Hydrogel Network in Polyethylene Matrices through Controlled Crazing and Polymerization. Industrial & Engineering Chemistry Research. 59:6609-6616. 2020
- Studying the mechanism of biodiesel acting as an environmental stress cracking agent with polyethylenes. Polymer. 191:122278-122278. 2020
- Influence of anionic and non-ionic surfactants on nanoparticle synthesis by solvent-free extrusion emulsification. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 587:124328-124328. 2020
- Physical Aging as the Driving Force for Brittle–Ductile Transition of Polylactic Acid. Macromolecular Chemistry and Physics. 221. 2020
- Effects of defects in hybrid sheet moulding compound – Evaluation of defects and the impact on mechanical properties. Materialwissenschaft und Werkstofftechnik. 50:1317-1325. 2019
- Effect of poly(2‐ethyl‐2‐oxazoline) and UV irradiation on the melt rheology and mechanical properties of poly(lactic acid). Journal of Applied Polymer Science. 136. 2019
- Stabilization of HSV-2 viral vaccine candidate by spray drying. International Journal of Pharmaceutics. 569:118615-118615. 2019
- Handling Constraints and Raw Material Variability in Rotomolding through Data-Driven Model Predictive Control. Processes. 7:610-610. 2019
- Plasticizing effect of oxidized biodiesel on polyethylene observed by nondestructive method. Fuel. 252:246-253. 2019
- Influence of Extrusion Mixing on Preparing Lipid Complexed Pea Starch for Functional Foods. Starch/Staerke. 71. 2019
- Data-Driven Advances in Manufacturing for Batch Polymer Processing Using Multivariate Nondestructive Monitoring. Industrial & Engineering Chemistry Research. 58:9940-9951. 2019
- Acoustic levitation as a screening method for excipient selection in the development of dry powder vaccines. International Journal of Pharmaceutics. 563:71-78. 2019
- Excipient selection for thermally stable enveloped and non-enveloped viral vaccine platforms in dry powders. International Journal of Pharmaceutics. 561:66-73. 2019
- Improved Chemical Reactivity of Lignocellulose from High Solids Content Micro-fibrillation by Twin-screw Extrusion. Journal of Polymers and the Environment. 27:643-651. 2019
- Improved part strength for the fused deposition 3D printing technique by chemical modification of polylactic acid. Polymer Engineering and Science. 59:E59-E64. 2019
- Mechanical properties of green canola meal composites and reinforcement with cellulose fibers. Polymer Bulletin. 76:1257-1275. 2019
- Model predictive control of uni-axial rotational molding process. Computers and Chemical Engineering. 121:306-316. 2019
- Nondestructive evaluation of sintering and degradation for rotational molded polyethylene. Polymer Degradation and Stability. 157:34-43. 2018
- Effect of Viscosity on Solvent-Free Extrusion Emulsification: Varying System Temperature. Industrial & Engineering Chemistry Research. 57:12071-12077. 2018
- Solvent‐free polymer emulsification inside a twin‐screw extruder. AIChE Journal. 64:2113-2123. 2018
- Consecutive Spray Drying to Produce Coated Dry Powder Vaccines Suitable for Oral Administration. ACS Biomaterial Science and Engineering. 4:1669-1678. 2018
- Inline rheological behavior of dispersed water in a polyester matrix with a twin screw extruder. Polymer Engineering and Science. 58:775-783. 2018
- Reactive processing preparation of sustainable composites from canola meal reinforced by chemical modification. European Polymer Journal. 102:187-194. 2018
- Impact of non-binder ingredients and molecular weight of polymer binders on heat assisted twin screw dry granulation. International Journal of Pharmaceutics. 536:336-344. 2018
- Reactive extrusion preparation and characterization of canola meal composites reinforced by a novel polymeric chain extender. Materials and Design. 138:1-10. 2018
- Editorial. International Polymer Processing. 32:526-526. 2017
- Effect of Viscosity on Solvent-Free Extrusion Emulsification: Molecular Structure. Industrial & Engineering Chemistry Research. 56:12538-12546. 2017
- Effects of annealing and swelling to initial plastic deformation of polyethylene probed by nonlinear ultrasonic guided waves. Polymer. 131:160-168. 2017
- Heat assisted twin screw dry granulation. AIChE Journal. 63:4748-4760. 2017
- In Honour of Andrew N. Hrymak. International Polymer Processing. 32:526-526. 2017
- Recovery behaviour of shape memory polyurethane based laminates after thermoforming. Smart Materials and Structures. 26:115002-115002. 2017
- Twin‐screw reactive extrusion for phosphorylation of pea starch with a retained granular identity. Starch/Staerke. 69. 2017
- Evaluating shape memory behavior of polymer under deep-drawing conditions. Polymer Testing. 62:295-301. 2017
- Analysis of Mullins effect in polyethylene using ultrasonic guided waves. Polymer Testing. 60:351-356. 2017
- Automated image analysis to characterize the melt densification stage of polymer sintering processes. Polymer Testing. 60:242-249. 2017
- Thermal wrinkling behavior of formable decorative film laminates. Journal of Plastic Film and Sheeting. 33:290-308. 2017
- Preparation of branched canola protein isolate and effects of molecular architecture on solution flow properties. Food Science & Technology. 79:287-293. 2017
- Spray dried human and chimpanzee adenoviral-vectored vaccines are thermally stable and immunogenic in vivo. Vaccine. 35:2916-2924. 2017
- Use of supercritical CO2 as a dispersing agent in the preparation of a polymer‐layered silicate nanocomposite. Polymer Composites. 38:987-995. 2017
- Preparation and characterization of cross-linked canola protein isolate films. European Polymer Journal. 89:419-430. 2017
- Wrinkling in polymer film‐polymer substrate systems and a technique to minimize these surface distortions. Polymer Engineering and Science. 57:31-43. 2017
- Factors Affecting Gloss and Color of Decorative Pressure Sensitive Adhesive Films During Thermomechanical Deformation. Polymer Engineering and Science. 56:1357-1365. 2016
- Preparation and characterization of soy protein films with a durable water resistance-adjustable and antimicrobial surface. Materials Science and Engineering C. 69:947-955. 2016
- Effect of temperature on the wetting behavior of hydroxypropyl methylcellulose in a twin-screw granulator. Powder Technology. 302:63-74. 2016
- Optimization of Spray Drying Conditions for Yield, Particle Size and Biological Activity of Thermally Stable Viral Vectors. Pharmaceutical Research. 33:2763-2776. 2016
- Evaluation of excipients for enhanced thermal stabilization of a human type 5 adenoviral vector through spray drying. International Journal of Pharmaceutics. 506:289-301. 2016
- Examining drug hydrophobicity in continuous wet granulation within a twin screw extruder. International Journal of Pharmaceutics. 496:3-11. 2015
- Examining the Influence of Production Scale on the Volume Expansion Behavior of Polyethylene Foams in Rotational Foam Molding. Advances in Polymer Technology. 34. 2015
- Potato protein isolate‐based biopolymers. Journal of Applied Polymer Science. 132. 2015
- Function of upstream and downstream conveying elements in wet granulation processes within a twin screw extruder. Powder Technology. 284:551-559. 2015
- Inner-shell excitation spectroscopy of peroxides. Chemical Physics. 461:117-124. 2015
- Twin screw granulation – review of current progress. Drug Development and Industrial Pharmacy. 41:1223-1231. 2015
- In Situ Rheological Measurement of an Aqueous Polyester Dispersion during Emulsification. Industrial & Engineering Chemistry Research. 54:5820-5829. 2015
- Effect of Biodiesel on Biofilm Biodeterioration of Linear Low Density Polyethylene in a Simulated Fuel Storage Tank. Journal of Offshore Mechanics and Arctic Engineering. 137:032211. 2015
- “Rolling” phenomenon in twin screw granulation with controlled-release excipients. Drug Development and Industrial Pharmacy. 41:482-492. 2015
- Progression of wet granulation in a twin screw extruder comparing two binder delivery methods. AIChE Journal. 61:780-791. 2015
- Influence of filler selection on twin screw foam granulation. Drug Development and Industrial Pharmacy. 41:35-42. 2015
- Evaluating the influence of contacting fluids on polyethylene using acoustic emissions analysis. Polymer Testing. 39:61-69. 2014
- Evaluating different alkyl ammonium modified organoclays in preparation of TPO nanocomposites with supercritical CO2. Polymer Composites. 35:1592-1602. 2014
- Experimental and numerical studies on bubble dynamics in nonpressurized foaming systems. Polymer Engineering and Science. 54:1947-1959. 2014
- Investigation of biofilm formation on polyethylene in a diesel/biodiesel fuel storage environment. Fuel. 128:240-247. 2014
- Understanding wet granulation in the kneading block of twin screw extruders. Chemical Engineering Science (CES). 113:11-21. 2014
- Bubble nucleation in nonpressurized polymer foaming systems. Polymer Engineering and Science. 54:1201-1210. 2014
- Negative Pressures in Modelling Rotating Polymer Processing Machinery Are Meaningless, But They Are Telling Something. International Polymer Processing. 29:295-297. 2014
- Microbial degradation and deterioration of polyethylene – A review. International Biodeterioration and Biodegradation. 88:83-90. 2014
- Hot-Melt Granulation in a Twin Screw Extruder: Effects of Processing on Formulations with Caffeine and Ibuprofen. Journal of Pharmaceutical Sciences. 102:4330-4336. 2013
- Effect of biodiesel addition on microbial community structure in a simulated fuel storage system. Bioresource Technology. 147:456-463. 2013
- Role of a micro-patterned adhesive interface on the performance of thermoformable multi-layered decorative polymeric film laminates. International Journal of Adhesion and Adhesives. 44:78-90. 2013
- Long term storage of biodiesel/petrol diesel blends in polyethylene fuel tanks. Fuel. 108:771-779. 2013
- A study of foam granulation and wet granulation in a twin screw extruder. Canadian Journal of Chemical Engineering. 91:725-730. 2013
- Characterization of structure and properties of thermoplastic potato starch film surface cross‐linked by UV irradiation. Starch/Staerke. 65:304-311. 2013
- Visual Studies of Model Foam Development for Rotational Molding Processes. Advances in Polymer Technology. 32:E809-E821. 2013
- Influence of di‐functional versus multi‐functional chain extenders on the foamability of a potato starch‐based biopolymer. Starch/Staerke. 64:944-954. 2012
- Multi-criteria analysis towards the new end use of recycled water for household laundry: A case study in Sydney. Science of the Total Environment. 438:59-65. 2012
- Examining the mechanics of granulation with a hot melt binder in a twin-screw extruder. Chemical Engineering Science (CES). 81:46-56. 2012
- Supercritical CO2 as an exfoliating aid for nanocomposite preparation: Comparison of different processing methodologies. Polymer Engineering and Science. 52:2049-2062. 2012
- Aspects of foam stability influencing foam granulation in a twin screw extruder. Powder Technology. 228:339-348. 2012
- Biocomposites reinforced with cellulose nanocrystals derived from potato peel waste. Carbohydrate Polymers. 90:709-716. 2012
- Characterization of extruded film based on thermoplastic potato flour. Journal of Applied Polymer Science. 125:3250-3258. 2012
- Foam granulation: new developments in pharmaceutical solid oral dosage forms using twin screw extrusion machinery. Drug Development and Industrial Pharmacy. 38:771-784. 2012
- Controlling the moisture absorption capacity in a fiber-reinforced thermoplastic starch using sodium trimetaphosphate. Industrial Crops and Products. 36:299-303. 2012
- In situ kinetic study of solid‐state crosslinking of potato starch. Starch/Staerke. 64:55-63. 2012
- The effect of pea fiber and potato pulp on thermal property, surface tension, and hydrophilicity of extruded starch thermoplastics. Carbohydrate Polymers. 86:700-707. 2011
- Influence of supercritical CO2 on the interactions between maleated polypropylene and alkyl‐ammonium organoclay. Journal of Applied Polymer Science. 119:2223-2234. 2011
- Bimodal Cell Structure of a Layered Silicate-Thermoplastic Olefin Elastomere Nanocomposite. KGK Kautschuk Gummi Kunststoffe. 63:493-495. 2010
- Wet Granulation in a Twin‐Screw Extruder: Implications of Screw Design. Journal of Pharmaceutical Sciences. 99:2090-2103. 2010
- Multiple percolation in a carbon‐filled polymer composites via foaming. Journal of Applied Polymer Science. 115:646-654. 2010
- New regs = New sampling methods. Pollution Engineering. 42. 2010
- In situ x-ray diffraction studies of alkyl quaternary ammonium montmorillonite in a CO2 environment. Journal of Chemical Physics. 130:044705. 2009
- Interaction of supercritical CO2 with alkyl-ammonium organoclays: Changes in morphology. Journal of Colloid and Interface Science. 324:177-184. 2008
- Studying the Effective Thermal Properties of Solids in Extrusion Machinery using a Discrete Particle Simulation Approach. International Polymer Processing. 23:301-311. 2008
- Cohesive‐driven particle circulation in the solids conveying zone of a single‐screw extruder. Advances in Polymer Technology. 27:74-88. 2008
- Improved through‐plane electrical conductivity in a carbon‐filled thermoplastic via foaming. Polymer Engineering and Science. 48:687-696. 2008
- Discrete particle simulations of solids compaction and conveying in a single‐screw extruder. Polymer Engineering and Science. 48:62-73. 2008
- Properties of a carbon filled cyclic olefin copolymer. Journal of Polymer Science, Part B: Polymer Physics. 45:1808-1820. 2007
- Determining the collision properties of semi-crystalline and amorphous thermoplastics for DEM simulations of solids transport in an extruder. Chemical Engineering Science (CES). 62:3699-3709. 2007
- Rheology studies of foam flow during injection mold filling. Polymer Engineering and Science. 47:522-529. 2007
- Aspects of foaming a glass‐reinforced polypropylene with chemical blowing agents. Journal of Applied Polymer Science. 102:4696-4706. 2006
- Recyclability of a layered silicate–thermoplastic olefin elastomer nanocomposite. Polymer Degradation and Stability. 91:2396-2407. 2006
- Reduced fibre breakage in a glass-fibre reinforced thermoplastic through foaming. Composites Science And Technology. 65:2240-2249. 2005
- Studying single-pass degradation of a high-density polyethylene in an injection molding process. Polymer Degradation and Stability. 90:136-146. 2005
- Rheology studies of polyethylene/chemical blowing agent solutions within an injection molding machine. Polymer Engineering and Science. 45:1108-1118. 2005
- Contact angle measurement of select compatibilizers for polymer-silicate layer nanocomposites. Polymer Testing. 24:423-427. 2005
- Modelling the solids inflow and solids conveying of single-screw extruders using the discrete element method. Powder Technology. 153:95-107. 2005
- Investigation of solids transport in a single‐screw extruder using a 3‐D discrete particle simulation. Polymer Engineering and Science. 44:2203-2215. 2004
- Experiments and flow analysis of a micropelletizing die. Polymer Engineering and Science. 44:1391-1402. 2004
- Channel flow cell studies on the evaluation of surface pretreatments using phosphoric acid or polymaleic acid for calcite stone protection. Journal of Colloid and Interface Science. 259:338-345. 2003
- Melting mechanism of a starved‐fed single‐screw extruder for calcium carbonate filled polyethylene. Polymer Engineering and Science. 40:2014-2026. 2000
- Alder Ene functionalization of polypropylene through reactive extrusion. Journal of Applied Polymer Science. 71:503-516. 1999
- Functionalization of ethylene‐propylene‐diene terpolymer via the alder ene reaction. Polymer Engineering and Science. 38:1694-1707. 1998
- A parametric study of the terminal maleation of polypropylene through an Alder Ene reaction. Journal of Polymer Science. 36:2371-2380. 1998
- Terminal functionalization of polypropylene via the Alder Ene reaction. Polymer. 39:327-334. 1998
- Evaluation of vinylidene group content in degraded polypropylene. Journal of Polymer Science. 35:3083-3086. 1997
- Modeling the reactive modification of HDPE in a nonintermeshing twin screw extruder. Advances in Polymer Technology. 14:87-96. 1995
- In vitro plantlet formation from embryonic explants of eastern white cedar (Thuja occidentalis L.). Tree Physiology. 3:273-283. 1987
-
preprints