0902 Automotive Engineering
Concept
Vocabulary Service
Overview
subject area of
-
'Journey Mapping', re-defined drive cycle: an accurate vehicle performance prediction tool Academic Article
-
'Journey Mapping', re-defined drive cycle: an accurate vehicle performance prediction tool Academic Article
-
3D FEA Thermal Modeling with Experimentally Measured Loss Gradient of Large Format Ultra-Fast Charging Battery Module Used for EVs Conference Paper
-
42V Automotive Power Systems Conference Paper
-
42V Integrated Starter/Alternator Systems Conference Paper
-
A Comparative Analysis for Six-Phase Motor Configurations Conference Paper
-
A Comparative Study between Physics, Electrical and Data Driven Lithium-Ion Battery Voltage Modeling Approaches Conference Paper
-
A Comparison of Componentization Constructs for Supporting Modularity in Simulink Conference Paper
-
A Computationally Lightweight Dynamic Programming Formulation for Hybrid Electric Vehicles Conference Paper
-
A Domain-Centralized Automotive Powertrain E/E Architecture Conference Paper
-
A Dynamic Programming Algorithm for HEV Powertrains Using Battery Power as State Variable Conference Paper
-
A Feasibility Study of Using DI Butanol as an Ignition Source for Dual-Fuel Combustion Conference Paper
-
A Mechatronics Approach for the Design of a New High Performance ElectroHydraulic Actuator Conference Paper
-
A Methodology for Modelling of Driveline Dynamics in Electrified
Vehicles Conference Paper
-
A Neuro-Fuzzy Approach to a Machine Vision-based Parts Inspection Problem Conference Paper
-
A Process for Modeling and Analysis of Prototyped Products and its Application to a Variable Fan Drive Conference Paper
-
A Service Oriented Integration Framework for Blow Molded Automotive Parts Design and Optimization Conference Paper
-
A Stochastic Model of Particle Dispersion in a Turbulent Gaseous Environment Academic Article
-
A Zero-Dimensional Intake Dilution Tracking Algorithm for Real-Time Feedback on Exhaust Gas Recirculation Academic Article
-
A bio-inspired scan matching algorithm for mobile robots in outdoor environments Academic Article
-
A comparison between numerical calculations and experimental measurements of the structure of a counterflow diffusion flame burning diluted methane in diluted air Academic Article
-
A detailed model for the flame synthesis of carbon nanotubes and nanofibers Academic Article
-
A hybrid electric vehicle energy optimization strategy by using fueling control in diesel engines Academic Article
-
A numerical investigation of the flame structure of an unsteady inverse partially premixed flame Academic Article
-
A reduced kinetic mechanism for premixed CH3Cl/CH4/air flames Academic Article
-
A reduced kinetic mechanism for premixed CH3Cl/air flames Academic Article
-
A review of autonomous vehicle technology landscape Academic Article
-
A review of autonomous vehicle technology landscape Academic Article
-
A review of the relevance of driving condition mapping and vehicle simulation for energy management system design Academic Article
-
A review of the relevance of driving condition mapping and vehicle simulation for energy management system design Academic Article
-
Absolute flammability limits and flame-balls Academic Article
-
Accelerated Sizing of a Power Split Electrified Powertrain Conference Paper
-
Acceleration support by integrated starter/alternator for automotive applications Academic Article
-
Acetylene and ethylene mole fractions in methane/air partially premixed flames Conference Paper
-
Active Injection Control for Enabling Clean Combustion in Ethanol-Diesel Dual-Fuel Mode Academic Article
-
Adaptive Real-Time Energy Management of a Multi-Mode Hybrid Electric Powertrain Conference Paper
-
Adaptive control for hybrid electric vehicles Academic Article
-
Additive Manufacturing Experimental Infill Testing and Optimization for Automotive Lightweighting Conference Paper
-
Advanced Finite Element Analysis of a Lightweight Nanometal-Polymer Hybrid Component with Experimental Validation, and Its Applications to Vehicle Lightweighting Conference Paper
-
Advancements in vehicular technology: potential implications for the older driver Academic Article
-
Agent-Oriented Manufacturing Scheduling Services for Enterprise Cooperation Conference Paper
-
Altering School Attendance Times to Prevent Child Pedestrian Injuries Academic Article
-
An Improvement on Low Temperature Combustion in Neat Biodiesel Engine Cycles Academic Article
-
An Internet-Based System Architecture for Collaborative Product Development Conference Paper
-
An Investigation of EGR Treatment on the Emission and Operating Characteristics of Modern Diesel Engines Conference Paper
-
An Investigation of OME3-Diesel Fuel Blend on a Multi-Cylinder Compression Ignition Engine Conference Paper
-
An Iterative Histogram-Based Optimization of Calibration Tables in a Powertrain Controller Conference Paper
-
An analytics approach to dis-aggregate national freight data to estimate hazmat traffic on rail-links and at rail-yards in Canada Academic Article
-
An assessment of stretch effects on a flame tip using the thin flame and thick flame formulations Academic Article
-
An elementary discussion of forward smoldering Academic Article
-
An engine cycle analysis of diesel-ignited ethanol low-temperature combustion Academic Article
-
An experimental and numerical investigation of n-heptane/air counterflow partially premixed flames and emission of NOx and PAH species Academic Article
-
An experimental and numerical investigation of the structure of steady two-dimensional partially premixed methane-air flames Conference Paper
-
Are older drivers’ driving patterns during an on-road driving task representative of their real-world driving patterns? Academic Article
-
Artificial neural network based adaptive control for plug-in hybrid electric vehicles Academic Article
-
Artificial neural network based adaptive control for plug-in hybrid electric vehicles Academic Article
-
Aspects of Migrating from Decentralized to Centralized E/E Architectures Conference Paper
-
Assembly Automation Journal
-
Automatic Calibrations Generation for Powertrain Controllers Using MapleSim Conference Paper
-
Automotive Hood Panel Design Utilizing Anisotropic Multi-Material Topology Optimization Conference Paper
-
Automotive Interprofessional Projects (IPRO®) Program at Illinois Institute of Technology Conference Paper
-
Battery Entropic Heating Coefficient Testing and Use in Cell-Level Loss Modeling for Extreme Fast Charging Conference Paper
-
Biomechanical impact testing of synthetic versus human cadaveric tibias for predicting injury risk during pedestrian-vehicle collisions Academic Article
-
CFD Analysis of Air Filters for an Off-Highway Vehicle Conference Paper
-
Catalyst influence on the flame synthesis of aligned carbon nanotubes and nanofibers Conference Paper
-
Characteristics of lifted triple flames stabilized in the near field of a partially premixed axisymmetric jet Academic Article
-
Characteristics of lifted triple flames stabilized in the near field of a partially premixed axisymmetric jet Conference Paper
-
Characterization of the Soot Deposition Profiles in Diesel Engine Exhaust Gas Recirculation (EGR) Cooling Devices Using a Digital Neutron Radiography Imaging Technique Conference Paper
-
Chemical Reactivity Control of DME/Ethanol Dual Fuel Combustion Conference Paper
-
Chevrolet Bolt Electric Vehicle Model Validated with On-the-Road Data and Applied to Estimating the Benefits of a Multi-Speed Gearbox Conference Paper
-
Clean Combustion in a Diesel Engine Using Direct Injection of Neat n-Butanol Academic Article
-
Clean combustion enabling with ethanol on a dual-fuel compression ignition engine Academic Article
-
Coatings on Resistance Welding Electrodes to Extend Life Conference Paper
-
Combustion and Emission Characteristics of SI and HCCI Combustion Fueled with DME and OME Conference Paper
-
Combustion and Exhaust Gas Speciation Analysis of Diesel and Butanol Post Injection Academic Article
-
Combustion and Flame Journal
-
Combustion control of DME HCCI using charge dilution and spark assistance Academic Article
-
Comparative Corrosion Assessment of Coated Alloys for Multi-Material Lightweight Vehicle Architectures Conference Paper
-
Comparative Corrosion Evaluation of Ferritic Stainless Steels Utilized in Automotive Exhaust Applications Conference Paper
-
Comparative Study between Equivalent Circuit and Recurrent Neural Network Battery Voltage Models Conference Paper
-
Comparison of Hydrostatic and Servovalve Controlled Hydraulic Actutation Systems in Robotics Conference Paper
-
Comparison of the effect of soot deposition on the flow and thermal characteristics of finned-plate-type and shell-and-tube-type exhaust gas recirculation cooling devices Academic Article
-
Computer Supported Collaborative Design: Review and Perspective Conference Paper
-
Constant Power Load Characteristics in Multi-Converter Automotive Power Electronic Intensive Systems Conference Paper
-
Contribution of curvature to flame-stretch effects on premixed flames Academic Article
-
Control Arm Design Utilizing Multi-Material Topology Optimization Conference Paper
-
Corrosion Fatigue of AM50 and AE44 Alloys at Various Temperature and R-Ratio Conference Paper
-
Corrosion Protection of Structural Magnesium Alloys: Recent Development Conference Paper
-
Crash performance of a preemie positioning device to enhance infant safety in vehicles Academic Article
-
Damage and Formability of AKDQ and High Strength DP600 Steel Tubes Conference Paper
-
Data-driven control of automotive diesel engines and after-treatment systems: State of the art and future challenges Academic Article
-
Decoupled disturbance rejection control for a turbocharged engine with a dual-loop exhaust gas recirculation system Academic Article
-
Design and Implementation of a Mobile Single-Phase AC Power Supply for Land Vehicles with 28V/200V Dual Voltage Alternators Conference Paper
-
Design and performance analysis on a new electro-hydraulic hybrid transmission system Academic Article
-
Design of As-Cast High Strength Al-Si-Cu-Ni-Sr Alloys Using the Taguchi Method Academic Article
-
Design of a Compact Thermal Management System for a High-Power Silicon Carbide Traction Inverter Conference Paper
-
Detection of Injected Urea Quantity and Correction for SCR Urea Dosing Control Conference Paper
-
Detection of Obstructions in Automotive Manifolds by Aeroacoustic Means Conference Paper
-
Diesel EGR Cooler Fouling at Freeway Cruise Conference Paper
-
Diesel EGR cooler fouling with Ni-Fe-Cr-Al DPF at Freeway Cruise Academic Article
-
Disturbance rejection in DOC-out temperature control for DPF regeneration Academic Article
-
Driving, Navigation, and Vehicular Technology: Experiences of Older Drivers and Their Co-Pilots Academic Article
-
Dynamic Modeling of an Interior Permanent Magnet Machine with Space-Vector-Modulation-Based Voltage Source Inverter Conference Paper
-
Dynamic Modelling of Multiphase Machines Based on the VSD Transformation Conference Paper
-
Effect of Diesel Soot Deposition on the Performance of Exhaust Gas Recirculation Cooling Devices Conference Paper
-
Effect of Fiber Laser Welding on the Fatigue Properties of Dissimilar Welded Joints between DP980 and HSLA Steels Conference Paper
-
Effect of Nugget Size on Tensile and Fatigue Strength of Spot Welded AZ31 Magnesium Alloy Conference Paper
-
Effect of fuel type on the extinction of fuel and air stream diluted partially premixed flames Academic Article
-
Effect of posture on forces and moments measured in a Hybrid III ATD lower leg Academic Article
-
Effect of pressure on counterflow H2–air partially premixed flames Academic Article
-
Effect of varying composition on temperature reconstructions obtained from refractive index measurements in flames Academic Article
-
Effects of Electrical Loads on 42V Automotive Power Systems Conference Paper
-
Effects of Varying Driving Schedules on the Drive Train Efficiency and Performance Characteristics of a Parallel Diesel-Hybrid Bus Conference Paper
-
Effects of an Ultra-Capacitor and Battery Energy Storage System in a Hybrid Electric Vehicle Conference Paper
-
Effects of assessing the productivity of faculty in academic medical centres: A systematic review Academic Article
-
Efficiency and Emission Trade-Off in Diesel-Ethanol Low Temperature Combustion Cycles Academic Article
-
Electrical System Architectures for Future Aircraft Conference Paper
-
Electrolytic Plasma Discharging Treatment of Cast Iron for Friction Reduction Conference Paper
-
Electronic control units for automotive electrical power systems: Communication and networks Academic Article
-
Energy Efficiency Comparison between Butanol and Ethanol Combustion with Diesel Ignition Academic Article
-
Energy Management System for Input-Split Hybrid Electric Vehicle (Si-EVT) with Dynamic Coordinated Control and Mode-Transition Loss Conference Paper
-
Engine Fault Detection Using Vibration Signal Reconstruction in the Crank-Angle Domain Academic Article
-
Ethanol diesel dual fuel clean combustion with FPGA enabled control Academic Article
-
Evaluation of Constitutive Behavior of Aluminum Extrusions and Their GMAW Welds Academic Article
-
Evaluation of the Biofidelity of the HIII and MIL-Lx Lower Leg Surrogates Under Axial Impact Loading Academic Article
-
Experimental Investigation of Diesel-Ethanol Premixed Pilot-Assisted Combustion (PPAC) in a High Compression Ratio Engine Academic Article
-
Experimental and FEA Investigation of Tensile Behaviour of High Strength Dual-Phase DP600 Steel Conference Paper
-
Experimental and theoretical investigation of partially premixed diffusion flames at extinction Academic Article
-
Experimental investigation of stretched premixed flames burning mixtures of methane and methyl chloride in air and comparison with numerical simulations Academic Article
-
Exploring New Joining Techniques of CFRP Cross Member Chassis Conference Paper
-
Extinction of diffusion flames burning diluted methane and diluted propane in diluted air Academic Article
-
Fault Detection and Diagnosis of Engine Spark Plugs Using Deep
Learning Techniques Academic Article
-
Field measurements of soot volume fractions in laminar partially premixed coflow ethylene/air flames Academic Article
-
Finite Element Simulation of the Bending and Springback Behavior of Advanced High Strength Steels (DP780) Conference Paper
-
Flame stretch effects on partially premixed flames Academic Article
-
Flame-vortex dynamics in an inverse partially premixed combustor: The Froude number effects Academic Article
-
Formability of an Automotive Aluminum Alloy-AA5754 CC Conference Paper
-
Fuel Burn Rate Control to Improve Load Capability of Neat n-Butanol Combustion in a Modern Diesel Engine Conference Paper
-
Gas-Dissolved Gasoline Spray - An Experimental Study Conference Paper
-
General and Galvanic Corrosion Behavior of Aluminized Ultra-High Strength Steel (UHSS) and Magnesium Alloy AZ35 Altered by Plasma Electrolytic Oxidation Coating Processes Conference Paper
-
Gravity effects on partially premixed flames: an experimental-numerical investigation Conference Paper
-
Gravity effects on steady two-dimensional partially premixed methane–air flames Academic Article
-
Heat Release Analysis of Clean Combustion with Ethanol Ignited by Diesel in a High Compression Ratio Engine Conference Paper
-
Heat release mechanisms in inhibited laminar counterflow flames Academic Article
-
Heavy Vehicle Systems International Journal of Heavy Vehicle Systems Journal
-
High Dynamic Response Full Order Stator Flux Linkage Observer for IPMSM Drives Conference Paper
-
High Energy Ignition Strategies for Diluted Mixtures via a Three-Pole Igniter Conference Paper
-
How to Report and Interpret Screening Test Properties: Guidelines for Driving Researchers Academic Article
-
Hybrid electric powertrains: current status, future trends, and electro-mechanical integration methods Academic Article
-
IEEE Control Systems Journal
-
Ignition Improvement for Ultra-Lean Dilute Gasoline Combustion Conference Paper
-
Impact Testing of a Hot-Formed B-Pillar with Tailored Properties - Experiments and Simulation Academic Article
-
Impact of Fuelling Techniques on Neat n-Butanol Combustion and Emissions in a Compression Ignition Engine Academic Article
-
Impact of Plasma Stretch on Spark Energy Release Rate under Flow Conditions Conference Paper
-
Impact of Rivet Head Height on the Tensile and Fatigue Properties of Lap Shear Self-Pierced Riveted CFRP to Aluminum Academic Article
-
Impact of Texture on r-value and its Measurement in Magnesium Alloy Sheets Academic Article
-
Impact testing of a hot-formed B-pillar with tailored properties - Experiments and simulation Conference Paper
-
Induction Heating of Catalytic Converter Systems and its Effect on Diesel Exhaust Emissions during Cold Start Conference Paper
-
Integrated Busbar Design for Stray Inductance and Volume Reduction in a High-Power SiC Traction Inverter Conference Paper
-
Integrated topology and packaging optimization for conceptual-level electric vehicle chassis design via the component-existence method Academic Article
-
International Journal of Automotive Technology and Management Journal
-
International Journal of Crashworthiness Journal
-
International Journal of Electric and Hybrid Vehicles Journal
-
International Journal of Engine Research Journal
-
International Journal of Powertrains International Journal of Powertrains Journal
-
International Journal of Vehicle Information and Communication Systems Journal
-
Investigation into Mixed and Hydrodynamic Frictions of PEO Coatings and Cast Iron Academic Article
-
Investigation of Al
<sub>2</sub>
O
<sub>3</sub>
-Ni Coated Cast Iron Brake Rotors Under Modified Brake Dynamometer Test Standards Conference Paper
-
Ion Current Measurement of Diluted Combustion Using a Multi-Electrode Spark Plug Conference Paper
-
Journal of Rail Transport Planning and Management Journal
-
Li-Ion Battery SOC Estimation Using Non-Linear Estimation Strategies Based on Equivalent Circuit Models Conference Paper
-
Li-Ion Battery SoC Estimation Using a Bayesian Tracker Conference Paper
-
Liftoff and extinction characteristics of fuel- and air-stream-diluted methane–air flames Academic Article
-
Liftoff characteristics of partially premixed flames under normal and microgravity conditions Academic Article
-
Lightweight Optimal Design of a Rear Bumper System Based on Surrogate Models Conference Paper
-
Load and Lubricating Oil Effects on Friction of a PEO Coating at Different Sliding Velocities Conference Paper
-
Local Strain Measurement in a Strip Cast Automotive Aluminum Alloy Sheet Conference Paper
-
Low Temperature Combustion Strategies for Compression Ignition Engines: Operability limits and Challenges Academic Article
-
Low Temperature Combustion of Neat Biodiesel Fuel on a Common-rail Diesel Engine Conference Paper
-
Low-Voltage Switched Reluctance Machine Based Traction Systems for Lightly Hybridized Vehicles Conference Paper
-
Magnesium Matrix Composites for Elevated Temperature Applications Conference Paper
-
Measurement of Multi-Dimension Soot Distribution in Diesel Particulate Filters by a Dynamic Neutron Radiography Conference Paper
-
Measuring Mechanical Properties of Aluminum Sheet and Their Resistance Spot Welds at Large Strains Using Digital Image Correlation Coupled with A Modified Shear Test Academic Article
-
Mechanical Properties Associated with the Interface of a Co-injection Molded Structural TPO Foam Conference Paper
-
Microprocessor Execution Time and Memory Use for Battery State of Charge Estimation Algorithms Conference Paper
-
Microstructure Development in a Magnesium Alloy Tube during Ring Hoop Tension Testing and Warm Gas Forming Conference Paper
-
Mitigation of the Diesel Soot Deposition Effect on the Exhaust Gas Recirculation (EGR) Cooling Devices for Diesel Engines Conference Paper
-
Mode Switching Control for Diesel Low Temperature Combustion with Fast Feedback Algorithms Academic Article
-
Mode Switching to Improve Low Load Efficiency of an Ethanol-Diesel Dual-Fuel Engine Conference Paper
-
Mode-shifting Minimization in a Power Management Strategy for Rapid Component Sizing of Multimode Power Split Hybrid Vehicles Conference Paper
-
Model Identification and Analysis of a High Performance Hydrostatic Actuation System Conference Paper
-
Modeling and Simulation of Mg AZ80 Alloy Forging Behaviour Conference Paper
-
Modeling soot formation in turbulent kerosene/air jet diffusion flames Academic Article
-
Modified Multi-material Topology Optimization Considering Isotropic and Anisotropic Materials Mixture Conference Paper
-
Monitoring the Effect of RSW Pulsing on AHSS using FEA (SORPAS) Software Conference Paper
-
Motorcycle Chassis Design Utilizing Multi-Material Topology Optimization Conference Paper
-
Multi-Joint Topology Optimization: A Method for Considering Joining in Multi-Material Design Conference Paper
-
Multi-Material Topology Optimization Considering Draw Direction Constraints Conference Paper
-
Multi-Material Topology Optimization Considering Manufacturing Constraints Conference Paper
-
Multi-Material Topology Optimization and Multi-Material Selection in Design Conference Paper
-
Multi-Material Topology Optimization as a Concept Generation and Design Tool Conference Paper
-
Multi-Material Topology Optimization: A Practical Approach and Application Conference Paper
-
Multi-Material Topology Optimization: A Practical Method for Efficient Material Selection and Design Conference Paper
-
Multi-material topology optimization for automotive design problems Academic Article
-
Multi-objective shape optimisation of an automotive universal joint assembly Academic Article
-
Multidisciplinary design optimization of a zero-emission vehicle chassis considering crashworthiness and hydroformability Academic Article
-
Multitarget Evaluation of Hybrid Electric Vehicle Powertrain Architectures Considering Fuel Economy and Battery Lifetime Conference Paper
-
Neat Biodiesel Fuel Engine Tests and Preliminary Modelling Conference Paper
-
Neural Network Control of a Bi-Fuel Engine Conference Paper
-
Neutron Radiography Study of Diesel Engine Exhaust Soot Depositions in a Exhaust Pipe With and Without Water Coolant Conference Paper
-
Neutron Radiography of Convective and Thermophoretic Diesel Engine Exhaust Soot Depositions in a Cooled Rectangular Chamber Conference Paper
-
Non-premixed flame synthesis of hydrophobic carbon nanostructured surfaces Academic Article
-
Numerical simulation of stoichiometric premixed flames burning CH3Cl / CH4 / air mixtures at atmospheric pressure with a full and short reaction mechanism and comparison of the flame speeds with experimental results Academic Article
-
Older Driver Estimates of Driving Exposure Compared to In-Vehicle Data in the Candrive II Study Academic Article
-
On the Concept of Negative Impedance Instability in the More Electric Aircraft Power Systems with Constant Power Loads Conference Paper
-
On the Suitability of Low-Voltage (42 V) Electrical Power System for Traction Applications in the Parallel Hybrid Electric Vehicles Conference Paper
-
On the Suitability of a New High-Power Lithium Ion Battery for Hybrid Electric Vehicle Applications Conference Paper
-
On the similitude between lifted and burner-stabilized triple flames: a numerical and experimental investigation Academic Article
-
Optimization of Gasoline-Dissolved CO2 Injectors Conference Paper
-
Optimization of the Exhaust Mass Flow Rate and Coolant Temperature for Exhaust Gas Recirculation (EGR) Cooling Devices Used in Diesel Engines Conference Paper
-
Outside-Engine Wear Study of Ceramic Coated Cylinder Wall Tribo-System Academic Article
-
Overmodulation Strategies for Dual Three-Phase PMSM Drives Conference Paper
-
Parts Consolidation of Automotive Front Crossmember: From Two-Piece CFRP Design to One-Piece Design Conference Paper
-
Path-following control of autonomous ground vehicles based on input convex neural networks Academic Article
-
Performance of Candidate Materials and Coatings for Thermal Management Systems for Proton Exchange Membrane Fuel Cells Conference Paper
-
Performance of Spark Energy Distribution Strategy on a Production Engine under Lean-Burn Conditions Conference Paper
-
Preliminary Testing of n-Butanol HCCI on High Compression Ratio Diesel Engines Conference Paper
-
Proceedings of the Combustion Institute Symposium (International) on Combustion Journal
-
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering Journal
-
Process analysis and abnormal situation detection: from theory to practice Academic Article
-
Protection of Mg Alloys for Structural Applications in Automobiles Conference Paper
-
Quenching of reverse smolder Academic Article
-
Rapid optimal design of a multimode power split hybrid electric vehicle transmission Academic Article
-
Renewable Ethanol Use for Enabling High Load Clean Combustion in a Diesel Engine Academic Article
-
Restraint device for airway management in low-birthweight infants Academic Article
-
Robust xEV Battery State-of-Charge Estimator Design Using a Feedforward Deep Neural Network Conference Paper
-
Round and rectangular winding loss analysis and optimisation for a 22,000 rpm 150 kW switched reluctance machine Academic Article
-
Round and rectangular winding loss analysis and optimisation for a 22,000 rpm 150 kW switched reluctance machine Academic Article
-
SAE (Society of Automotive Engineers) Transactions SAE International Journal of Engines Journal
-
SAE International Journal of Aerospace Journal
-
SAE International Journal of Fuels and Lubricants Journal
-
SAE International Journal of Materials and Manufacturing Journal
-
SAE Technical Papers Journal
-
Scalar transport modeling in large eddy simulation of turbulent premixed flames Conference Paper
-
Shifting patterns in the application of industrial policy Academic Article
-
Shifting patterns in the application of industrial policy Academic Article
-
Simultaneous Free-Size, Gauge, and Composite Optimization for Automotive Chassis Design Conference Paper
-
South Africa [control education] Academic Article
-
Spatiotemporal Approaches to Analyzing Pedestrian Fatalities: The Case of Cali, Colombia Academic Article
-
State-of-the-art electrified powertrains - hybrid, plug-in, and electric vehicles Academic Article
-
Stretched laminar flamelet modeling of turbulent chloromethane-air nonpremixed jet flames Academic Article
-
Structure of partially premixed n-heptane–air counterflow flames Conference Paper
-
Structures of multiple combustion waves formed under filtration of lean hydrogen-air mixtures in a packed bed Conference Paper
-
Study of Heat Release Shaping via Dual-Chamber Piston Bowl Design to Improve Ethanol-Diesel Combustion Performance Conference Paper
-
Study of soot growth in a plug flow reactor using a moving sectional model Conference Paper
-
Suitability Study of n-Butanol for Enabling PCCI and HCCI and RCCI Combustion on a High Compression-ratio Diesel Engine Conference Paper
-
Suitability of the pulse adjustment technique to control single DC/DC choppers feeding vehicular constant power loads in parallel with conventional loads Academic Article
-
Surface Effect of a PEO Coating on Friction at Different Sliding Velocities Academic Article
-
Switched-Capacitor Cell Balancing: A Fresh Perspective Conference Paper
-
Temperature measurements in steady two-dimensional partially premixed flames using laser interferometric holography Academic Article
-
The Effect of Continuous Galvanizing Process Parameters on the User Properties of Hot-Rolled Transformation Induced Plasticity Steels Conference Paper
-
The Effect of High-Power Capacitive Spark Discharge on the Ignition and Flame Propagation in a Lean and Diluted Cylinder Charge Conference Paper
-
The commoditisation of automotive assembly: Canada as a cautionary tale Academic Article
-
The commoditisation of automotive assembly: Canada as a cautionary tale Academic Article
-
The influence of the interface coefficient of friction upon the propensity to judder in automotive clutches Academic Article
-
The removal of NO by low-temperature O3 oxidation Academic Article
-
The structure and extinction of partially premixed flames burning methane in air Academic Article
-
The structure of inhibited counterflowing nonpremixed flames Academic Article
-
The structure of nonpremixed methyl chloride and methyl chloride/methane air flames near extinction Academic Article
-
The structure of triple flames stabilized on a slot burner Academic Article
-
Thermal Modeling of a Rotating Heat Pipe Aero-Engine Nose Cone Anti-Icing System Conference Paper
-
Thermal modeling of a rotating heat pipe aero-engine nose cone anti-icing system Conference Paper
-
Three-Dimension Deposited Soot Distribution Measurement in Silicon Carbide Diesel Particulate Filters by Dynamic Neutron Radiography Conference Paper
-
Three-Dimensional Structure of Portevin-Le Chatelier Bands and Shear Bands in Strip Cast AA5754 Sheets Using Digital Image Correlation Academic Article
-
Three-dimension deposited soot distribution measurement in silicon carbide diesel particulate filters by dynamic neutron radiography Conference Paper
-
Topology, size and shape optimization of an automotive cross car beam Academic Article
-
Traffic Injury Prevention Journal
-
Transient Build-up and Effectiveness of Diesel Exhaust Gas Recirculation Academic Article
-
Ultra-High Speed Machining of A356-T6 Aluminum Alloy for Automotive Applications Academic Article
-
Vaporization of a spinning fuel droplet Academic Article
-
Wear Dependent Tool Reliability Analysis during Cutting Titanium Metal Matrix Composites (Ti-MMCs) Academic Article
-
Wear Performances of Gray Cast Iron Brake Rotor with Plasma Electrolytic Aluminating Coating against Different Pads Conference Paper
-
Wear and Corrosion Behaviours of PEA Alumina Coatings on Gray Cast Iron Conference Paper
-
Weldability Improvement Using Coated Electrodes for RSW of HDG Steel Conference Paper
-
Why Industry 4.0 is Not Enhancing National and Regional Resiliency in the Global Automotive Industry Academic Article
-
Why Industry 4.0 is not enhancing national and regional resiliency in the global automotive industry Academic Article