Geoffrey Brooks - McMaster Experts

Affiliations

Faculty of Engineering, McMaster University
Adjunct Professor, Materials Science and Engineering, Faculty of Engineering

Scholarly Activity in McMaster Experts

Co-author Network

Scholarly Activity
Research
Contact
View All

selected scholarly activity

chapters
- Electrically-Enhanced Boron and Phosphorus Removal from Silicon by CaO–SiO2–Al2O3/–MgO Slag Treatment. Minerals, Metals and Materials Series. 1459-1471. 2024
- Application of solar thermal energy to metallurgical processes. Advances in Chemical Engineering. 197-246. 2021
- Structure–Thermodynamics Interrelation for the GeO2 and PdO Containing MgO-Saturated Ferrous Calcium Silicate (FCS) Slag Relevant to E-waste Processing. Minerals, Metals and Materials Series. 83-93. 2020
- Production Methods for Aluminum: Alternative. 2040-2059. 2019
- Electronic Waste Processing through Copper Recycling. 577-592. 2016
- Electronic Waste Processing through Copper Recycling. 577-592. 2016
- Effects of Structure on the Thermodynamic and Transport Properties of Na ₂ O‐CaO‐SiO ₂ ‐FeO‐Fe ₂ O ₃ Melts. 511-518. 2016
- Development of High Flux Solar Simulators for Solar Thermal Research. 147-159. 2015
- Development of High Flux Solar Simulators for Solar Thermal Research. 149-159. 2015
- A Review: Solar Thermal Reactors for Materials Production. 1-14. 2014
- Analysis of Boron Treatment for V Removal Using AlB₂and AlB₁₂Based Master Alloys. 963-968. 2014
- Cold Modelling of Splashing Phenomena in Oxygen Steelmaking. 325-332. 2014
- Electrically Enhanced Metal Purification Using Slag. 587-595. 2014
- Modelling of Slag Foaming Coupled with Decarburisation. 401-408. 2014
- Study of Ni‐Impurity Removal from Al Melt. 1091-1097. 2012
- Aluminate Spinels as Sidewall Linings for Aluminum Smelters. 1085-1090. 2011
- Study of Early Stage Interaction of Oxygen with Al; Methods, Challenges and Difficulties. 725-730. 2011
- Study of Early Stage Interaction of Oxygen with Al; Methods, Challenges and Difficulties. 725-730. 2011
conferences
- Ammonia Direct Reduction of Iron Oxides — Preliminary Assessment. AISTech - Iron and Steel Technology Conference Proceedings. 295-302. 2024
- Characterization of Hydrogen DRI Samples From ZESTY Process. AISTech - Iron and Steel Technology Conference Proceedings. 264-275. 2024
- Evaluation of Combined DC/AC Inductive Heating of Steel Billet. AISTech - Iron and Steel Technology Conference Proceedings. 1981-1987. 2024
- Hydrogen Flame Behavior in High Temperature Steelmaking Environment. AISTech - Iron and Steel Technology Conference Proceedings. 1953-1961. 2024
- Improving Acoustic-Based Slag Foam Control Systems in the BOF. AISTech - Iron and Steel Technology Conference Proceedings. 489-494. 2024
- The Design of Sound Cavities for Microphone Sensors in Steelmaking. AISTech - Iron and Steel Technology Conference Proceedings. 803-813. 2024
- Variation of Ladle Eye Size Using Image Analysis. AISTech - Iron and Steel Technology Conference Proceedings. 1724-1729. 2024
- Comparison of Hydrogen Reduction of Different Lead-Bearing Materials for Lead Recovery. Minerals, Metals and Materials Series. 187-197. 2023
- Heat Transfer in a BOF Converter. AISTech - Iron and Steel Technology Conference Proceedings. 884-890. 2023
- High Vacuum Solar Thermal Dissociation for Metal and Oxide Extraction. Minerals, Metals and Materials Series. 77-86. 2023
- Lanthanum-Light Metal Alloys Production Using Secondary Resources—Thermodynamic Analysis. Minerals, Metals and Materials Series. 55-64. 2023
- NOVEL METALLURGICAL PATHWAYS FOR METAL AND OXIDE EXTRACTION FROM LUNAR REGOLITH. 18th Annual Meeting of the Asia Oceania Geosciences Society. 174-176. 2022
- Detection of Stirring at Low Flowrates Using Acoustic Sensors. AISTech - Iron and Steel Technology Conference Proceedings. 1814-1820. 2022
- Heat Transfer in a BOF Converter. 8th International Congress on the Science and Technology of Steelmaking. 434-439. 2022
- Porosity in Iron Ore Sintering. AISTech - Iron and Steel Technology Conference Proceedings. 1821-1830. 2022
- Potential for Increased Scrap Melting in a BOF. AISTech - Iron and Steel Technology Conference Proceedings. 441-449. 2022
- The SABRE South experiment at the Stawell Underground Physics Laboratory. Proceedings of Science. 2022
- Analysis of Heat Loss in Oxygen Steelmaking. AISTech - Iron and Steel Technology Conference Proceedings. 1585-1591. 2021
- Analysis of Heat Loss in Oxygen Steelmaking. AISTech 2021 Proceedings of the Iron and Steel Technology Conference. 1585-1591. 2021
- Diffusion Measurements of CO2 Within Carbon Anodes for Aluminium Smelting. Minerals, Metals and Materials Series. 1183-1188. 2020
- Reduction of Lead-Rich Slags with Coke in the Lead Blast Furnace. Minerals, Metals and Materials Series. 173-185. 2020
- Lime-Magnetite Pellets (LMPs) for Ironmaking. AISTech - Iron and Steel Technology Conference Proceedings. 687-700. 2019
- Reheat Furnace Efficiency at Laverton Rod Mill. AISTech - Iron and Steel Technology Conference Proceedings. 2461-2472. 2019
- Slag Basicity: What Does It Mean?. Minerals, Metals and Materials Series. 297-308. 2019
- Slag-coke interactions in the lead blast furnace. Proceedings of the 10th European Metallurgical Conference, EMC 2019. 181-196. 2019
- Use of Sound Signals in Analyzing Flow Behavior in Steel Vessels. AISTech - Iron and Steel Technology Conference Proceedings. 1123-1132. 2019
- Alternative processing routes for magnetite ores. AISTech - Iron and Steel Technology Conference Proceedings. 399-406. 2018
- Dynamic modeling of BOF process: Comparison of model performance with plant data. AISTech - Iron and Steel Technology Conference Proceedings. 981-991. 2018
- Structural Analysis of Germanium (Ge)-Containing Ferrous Calcium Silicate Magnesia Slag for Applications of Black Copper Smelting. Minerals, Metals and Materials Series. 295-304. 2018
- The behavior of manganese in oxygen steelmaking. AISTech - Iron and Steel Technology Conference Proceedings. 971-979. 2018
- Understanding the Anode Porosity as a Means for Improved Aluminium Smelting. Minerals, Metals and Materials Series. 1235-1242. 2018
- Analysis for Optimum Conditions for Recovery of Valuable Metals from E-waste Through Black Copper Smelting. Minerals, Metals and Materials Series. 419-427. 2017
- Anode characterisation and gas diffusion behaviour in aluminium smelting. AIP Conference Proceedings. 2017
- CFD Modeling of Three-phase Flotation Column Incorporating a Population Balance Model. Procedia Engineering. 313-317. 2017
- Dynamic modeling of oxygen steelmaking process: A multi-zone kinetic approach. AISTech - Iron and Steel Technology Conference Proceedings. 1315-1325. 2017
- High Temperature Properties of Molten Nitrate Salt for Solar Thermal Energy Storage Application. Minerals, Metals and Materials Series. 531-539. 2017
- Numerical modeling of three-phase slurry bubble column: Study of particle effects. AIP Conference Proceedings. 2017
- Splash generation in oxygen steelmaking: What is known?. AISTech - Iron and Steel Technology Conference Proceedings. 1253-1260. 2017
- Vibration analysis of ladle gas stirring using cold model and plant data. AISTech - Iron and Steel Technology Conference Proceedings. 1501-1509. 2017
- Modeling of Droplet Generation in a Top Blowing Steelmaking Process. Metallurgical and Materials Transactions B. 3350-3361. 2016
- Analysis of desiliconization reaction kinetics in a BOF. AISTech - Iron and Steel Technology Conference Proceedings. 1019-1026. 2016
- Bloated Droplet Theory: A New Approach to Understanding Oxygen Steelmaking. AISTech - Iron and Steel Technology Conference Proceedings. 1047-1053. 2016
- Effects of Structure on the Thermodynamic and Transport Properties of Na2O-CaO-SiO2-FeO-Fe2O3 Melts. ADVANCES IN MOLTEN SLAGS, FLUXES, AND SALTS. 511-518. 2016
- Management of Impurities in Cast House with Particular Reference to Ni and V. Minerals, Metals and Materials Series. 33-38. 2016
- Principal component analysis of vibration signal in ladle metallurgy. AISTech - Iron and Steel Technology Conference Proceedings. 1245-1253. 2016
- Production of Aluminum Sulfide through Carbosulfidation Utilising H2S. Minerals, Metals and Materials Series. 1299-1304. 2016
- CFD analysis of oxygen steelmaking kinetics and slag foaming using IMPHOS pilot plant data. AISTech - Iron and Steel Technology Conference Proceedings. 3745-3752. 2015
- Transient behavior of dephosphorization kinetics in oxygen steelmaking. AISTech - Iron and Steel Technology Conference Proceedings. 3225-3237. 2015
- A Review: Solar Thermal Reactors for Materials Production. TMS Annual Meeting. 1-14. 2014
- A review of CFD modelling of flotation cells. Proceedings of the 19th Australasian Fluid Mechanics Conference, AFMC 2014. 2014
- Cold Modelling of Splashing Phenomena in Oxygen Steelmaking. TMS Annual Meeting. 325-332. 2014
- Electrically Enhanced Metal Purification Using Slag. CELEBRATING THE MEGASCALE: PROCEEDINGS OF THE EXTRACTION AND PROCESSING DIVISION SYMPOSIUM ON PYROMETALLURGY IN HONOR OF DAVID G.C. ROBERTSON. 587-595. 2014
- Modelling of Slag Foaming Coupled with Decarburisation. TMS Annual Meeting. 401-408. 2014
- Preliminary numerical simulation of chemically reacting gas and liquid phases in oxygen steelmaking. Proceedings of the 19th Australasian Fluid Mechanics Conference, AFMC 2014. 2014
- Investigation of Electrolytic Bubble Behaviour in Aluminium Smelting Cell. Light Metals. 591-596. 2013
- Management of Impurities in Cast House with Particular Reference to Ni and V. Light Metals. 33-38. 2013
- Analysis of Splash Data From Oxygen Steelmaking. AISTech - Iron and Steel Technology Conference Proceedings. 2083-2094. 2013
- Numerical Simulation of Slag Foaming in High Temperature Molten Metal with Population Balance Modeling. Procedia Engineering. 421-428. 2013
- 2D DISTRIBUTION OF FORSTERITE AND ENSTATITE IN PROTOPLANETARY DISKS. Meteoritics and Planetary Science. A314-A314. 2012
- REFRACTORY METAL NUGGETS - FORMATION OF THE FIRST CONDENSATES IN THE SOLAR NEBULA. Meteoritics and Planetary Science. A245-A245. 2012
- Study of Ni-impurity removal from Al melt. Light Metals. 1091-1097. 2012
- CFD Modelling of Combustion Behaviour in Slag Fuming Furnaces. TMS Annual Meeting. 251-258. 2012
- Study of Ni-Impurity Removal from Al Melt. Light Metals. 1091-1097. 2012
- Analysis of transition metal (V, Zr) borides formation in aluminium melt. Proceedings - European Metallurgical Conference, EMC 2011. 825-838. 2011
- Fabrication of spinel composites for sidewall of Al Smelter application. Proceedings - European Metallurgical Conference, EMC 2011. 865-880. 2011
- Experimental study on splashing phenomenon in Electric Arc Furnace steelmaking. AISTech - Iron and Steel Technology Conference Proceedings. 1017-1025. 2011
- Experimental Investigation of Single Bubble Characteristics in a Cold Model of a Hall‐Heroult Electrolytic Cell. Light Metals. 575-580. 2011
- Thermodynamic Analysis of Ti, Zr, V and Cr Impurities in Aluminium Melt. Light Metals. 751-756. 2011
- Aluminate Spinels as Sidewall Linings for Aluminum Smelters. Light Metals. 1085–1090-1085–1090. 2011
- Control and Removal of Impurities from Al Melts: A Review. Materials Science Forum. 149-160. 2011
- Expermental Investigation of Single Bubble Characteristics in a Cold Model of a Hall-Héroult Electrolytic Cell. Light Metals. 575-580. 2011
- Study of Early Stage Interaction of Oxygen with Al; Methods, Challenges and Difficulties. Light Metals. 725-730. 2011
- Thermodynamic Analysis of Ti, Zr, V and Cr Impurities in Aluminum Melt. Light Metals. 751-756. 2011
- Development of comprehensive model for oxygen steelmaking. AISTech - Iron and Steel Technology Conference Proceedings. 1091-1101. 2010
- A Computational Fluid Dynamic Modeling Study of Slag Fuming in Top Submerged Lance Smelting Furnace. Lecture Notes in Engineering and Computer Science. 1069-1074. 2010
- Development of online sensors for bubble stirred vessels. TMS Annual Meeting. 173-182. 2010
- SIDEWALL MATERIALS FOR HALL-HEROULT PROCESS. Light Metals. 883-888. 2010
- Distribution of impurities in magnesium production via silicothermic reduction. Proceedings - European Metallurgical Conference, EMC 2009. 1401-1418. 2009
- Transient Kinetics of Slag Metal Reactions. Metallurgical and Materials Transactions B. 353-362. 2009
- CFD MODELLING OF GAS INJECTIONS IN TOP SUBMERGED LANCE SMELTING. TMS 2009 138TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS CHARACTERIZATION, COMPUTATION AND MODELING. 95-+. 2009
- Density segregation of granular material in a rotating cylindrical tumbler. Proceedings of SPIE - The International Society for Optical Engineering. 2008
- Corrosion Behavior of Nickel Ferrite-Based Ceramics for Aluminium Electrolysis Cells. Light Metals. 909-913. 2007
- Simulation of suspension of solids in a liquid in a mixing tank using SPH and comparison with physical modelling experiments. Progress in Computational Fluid Dynamics. 91-91. 2007
- Simulation of suspension of solids in a liquid in a mixing tank using SPH and comparison with physical modelling experiments. Progress in Computational Fluid Dynamics. 91-100. 2007
- Challenges in light metals production. GREEN PROCESSING 2006. 145-+. 2006
- The physical chemistry of the carbothermic route to magnesium. Magnesium Technology. 25-+. 2006
- An experimental study on floating solids in a liquid bath. TMS Annual Meeting. 655-661. 2005
- Developments in steel recycling technology. Australasian Institute of Mining and Metallurgy Publication Series. 65-72. 2004
- Droplet generation and residence time in slag during top blown oxygen steelmaking. OXYGEN IN STEELMAKING. 37-50. 2004
- Marangoni effect in refractory slag line dissolution. Advances in Refractories for the Metallurgical Industries IV. 513-526. 2004
- Role of oxygen in interfacial phenomena during high temperature reactions. OXYGEN IN STEELMAKING. 203-217. 2004
- Advanced image analysis of molten slag for process control. METALLURGICAL AND MATERIALS PROCESSING: PRINCIPLES AND TECHNOLOGIES, VOL 1. 475-483. 2003
- Interfacial area in pyrometallurgical reactor design. METALLURGICAL AND MATERIALS PROCESSING: PRINCIPLES AND TECHNOLOGIES, VOL 1. 965-974. 2003
- Investigation of Electrolytic Bubble Behaviour in Aluminum Smelting Cell. Minerals, Metals and Materials Series. 591-596. 2003
- Physical chemistry of reactive ball milling. METALLURGICAL AND MATERIALS PROCESSING: PRINCIPLES AND TECHNOLOGIES, VOL 1. 527-538. 2003
- Heat-transfer considerations in the bath smelting of composite organic and ferrous wastes. Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy. 2002
- Interfacial area in top blown oxygen steelmaking. Proceedings - Ironmaking Conference. 837-850. 2002
- Interfacial area in top blown oxygen steelmaking. Steelmaking Conference Proceedings. 749-762. 2002
- Solidification and flow behaviour of mould fluxes. Steelmaking Conference Proceedings. 145-155. 2002
- Tissue-specific changes in the expression of monocarboxylate transporters (MCT) and LDH after chronic hypoxia. The FASEB Journal. A96-A96. 2001
- Solidification of mould fluxes. 59TH ELECTRIC FURNACE CONFERENCE AND 19TH PROCESS TECHNOLOGY CONFERENCE PROCEEDINGS. 749-759. 2001
- Thermodynamic Modelling of an Electric Arc Furnace. 55th Electric Furnace Conference Proceedings. 645-649. 1998
- Bubbling in a tundish. Proceedings - Ironmaking Conference. 719-727. 1997
- Continuous steelmaking: The balance between intensity and refining. Proceedings - Ironmaking Conference. 695-701. 1997
- Bubbling in a Tundish. 56th Ironmaking Conference Proceedings. 719-727. 1997
- Bubbling in a Tundish. 80th Steelmaking Conference Proceedings. 655-663. 1997
- Continuous Steelmaking: The Balance Between Intensity and Refining. 56th Ironmaking Conference Proceedings. 695-701. 1997
- Continuous Steelmaking: The Balance Between Intensity and Refining. 80th Steelmaking Conference Proceedings. 631-637. 1997
- The design of counter current metallurgical reactors. Light Metals. 59-72. 1996
journal articles
- Lunar simulant behaviour variability and implications on terrestrial based lunar testing. Icarus. 422. 2024
- NOx Prediction of Supersonic Coherent Jets for Electric Arc Steelmaking Furnace. Metallurgical and Materials Transactions B. 55. 2024
- Economics of Electrowinning Iron from Ore for Green Steel Production. Journal of Sustainable Metallurgy. 10. 2024
- Iron Oxide Direct Reduction and Iron Nitride Formation Using Ammonia: Review and Thermodynamic Analysis. Journal of Sustainable Metallurgy. 10. 2024
- On The Diffusivity of Boron in Slag During Silicon Refining. Journal of Sustainable Metallurgy. 10. 2024
- Effect of gangue on CO₂ emission for different decarbonisation pathways. Ironmaking and Steelmaking. 51:356-368. 2024
- Characterization and Deviation Analysis of a High-Flux Solar Simulator With Metal-Halide Lamps. Journal of Solar Energy Engineering, Transactions of the ASME. 146. 2024
- Experimental Study of Silicon Refining by Slag Treatment: Distribution of Boron and Phosphorus. E3S Web of Conferences. 543:02012-02012. 2024
- Hydrogen Plasma for Low-Carbon Extractive Metallurgy: Oxides Reduction, Metals Refining, and Wastes Processing. Journal of Sustainable Metallurgy. 2024
- Current Lunar dust mitigation techniques and future directions. Acta Astronautica. 213:627-644. 2023
- Kinetics and Mechanism of Hydrogen Reduction of Lead-Silicate Slag. Metallurgical and Materials Transactions B. 54:3060-3077. 2023
- A review on the preparation techniques and geotechnical behaviour of icy lunar regolith simulants. Advances in Space Research. 72:4553-4581. 2023
- Investigation of heat transfer processes in multi-sized solar-sintered regolith for lunar ISRU program. International Journal of Heat and Mass Transfer. 214:124387-124387. 2023
- Simulation and background characterisation of the SABRE South experiment. European Physical Journal C. 83. 2023
- (Invited) Bubble Trouble: Simulation of Molten Oxide Electrolysis in Reduced Gravity. ECS Meeting Abstracts. MA2023-01:2741-2741. 2023
- Technoeconomic Analysis for Green Hydrogen in Terms of Production, Compression, Transportation and Storage Considering the Australian Perspective. Processes. 11:2196-2196. 2023
- Kinetics of Electrically Enhanced Boron Removal From Silicon Using CaO-SiO2 and CaO-SiO2-Al2O3 Slag. Metallurgical and Materials Transactions B. 54:1228-1244. 2023
- Lead Recovery From PbO Using Hydrogen as a Reducing Agent. Metallurgical and Materials Transactions B. 54:996-1016. 2023
- Decarbonisation and hydrogen integration of steel industries: Recent development, challenges and technoeconomic analysis. Journal of Cleaner Production. 395:136391-136391. 2023
- Investigation on heat conduction of multi-sized sintered-ceramic powders based on Monte-Carlo method. International Journal of Heat and Mass Transfer. 201:123631-123631. 2023
- Metal and Oxide Sublimation from Lunar Regolith: A Kinetics Study. Minerals. 13:79-79. 2023
- The Production of Rare Earth based Magnesium and Aluminium Alloys – A Review. Mineral Processing and Extractive Metallurgy Review. ahead-of-print:1-24. 2023
- Mineral Processing and Metal Extraction on the Lunar Surface - Challenges and Opportunities. Mineral Processing and Extractive Metallurgy Review. 43:865-891. 2022
- Porosity, Mineralogy, Strength, and Reducibility of Sinter Analogues from the Fe2O3 (Fe3O4)-CaO-SiO2 (FCS) Ternary System. Minerals. 12:1253-1253. 2022
- Thermodynamics of Gallium (Ga) at Black Copper Smelting Conditions Relevant to E-Waste Processing. Metallurgical and Materials Transactions B. 53:3136-3146. 2022
- Thermophysical property evolution during molten regolith electrolysis. Planetary and Space Science. 219:105527-105527. 2022
- Analytical Evaluation of Heat Flow in Oxygen Steelmaking. ISIJ International. 62:1396-1407. 2022
- Acoustic Analysis of Slag Foaming in the BOF. Metals. 12:1142-1142. 2022
- Global Droplet Heat Transfer in Oxygen Steelmaking Process. Metals. 12:992-992. 2022
- Contribution of CO2 Emissions from Basic Oxygen Steelmaking Process. Metals. 12:797-797. 2022
- A predictive study on effective thermal conductivity of sintered nickel powder under different thermal processing conditions. International Journal of Heat and Mass Transfer. 185:122380-122380. 2022
- Metals Production and Metal Oxides Reduction Using Hydrogen: A Review. Journal of Sustainable Metallurgy. 8:1-24. 2022
- Effect of Build-ups on Ladle Wall on Acoustic Signals in Gas-Stirred Ladles. Metallurgical and Materials Transactions B. 53:41-49. 2022
- Droplet Heat Transfer in Oxygen Steelmaking. Metallurgical and Materials Transactions B. 52:4141-4156. 2021
- Review on Solar Thermochemical Processing for Lunar Applications and Their Heat Transfer Modeling Methods. Journal of Heat Transfer. 143. 2021
- Evaluation of concentrated solar thermal energy for iron ore agglomeration. Journal of Cleaner Production. 317:128313-128313. 2021
- Application of mass and energy balance in oxygen steelmaking. Ironmaking and Steelmaking. 48:995-1000. 2021
- Thermodynamic modelling of ultra-high vacuum thermal decomposition for lunar resource processing. Planetary and Space Science. 204:105272-105272. 2021
- General heat balance for oxygen steelmaking. Journal of Iron and Steel Research International. 28:538-551. 2021
- Effect of impurity oxides on CWF (CaFe₃O₅) formation in lime magnetite pellets – part I: thermodynamic assessments and experimental investigations. Ironmaking and Steelmaking. 48:299-312. 2021
- Effect of impurity oxides on CWF (CaFe₃O₅) formation in lime magnetite pellets – part II: microstructural analysis and physical and mechanical testing. Ironmaking and Steelmaking. 48:313-323. 2021
- A scalable and reconfigurable industrial-grade Slow Control System for SABRE-South Dark matter experiment. Journal of Instrumentation. 16:P03002-P03002. 2021
- General mass balance for oxygen steelmaking. Ironmaking and Steelmaking. 48:40-54. 2021
- Analyses of CWF (CaFe₃O₅) phase formation in lime-magnetite pellets. Ironmaking and Steelmaking. 47:852-864. 2020
- Improving the energy resolution while mitigating the effects of dark-noise, for a microcontroller based SiPM sensor. Journal of Instrumentation. 15:P09028-P09028. 2020
- Alternative route for magnetite processing for lower carbon footprint iron-making through lime-magnetite pellets containing CaFe₃O₅. Ironmaking and Steelmaking. 47:674-685. 2020
- Application of vibration and sound signals in monitoring iron and steelmaking processes. Ironmaking and Steelmaking. 47:178-187. 2020
- Cold model study of sound signals from gas-stirred ladles. Ironmaking and Steelmaking. 47:210-217. 2020
- Study of the Structure of FeOx-CaO-SiO2-MgO and FeOx-CaO-SiO2-MgO-Cu2O-PdO Slags Relevant to Urban Ores Processing through Cu Smelting. Metals. 10:78-78. 2020
- SiPM Smart Sensor based portable coincidence system for distributed field applications. Journal of Instrumentation. 14:P09026-P09026. 2019
- Monitoring of less-common residual elements in scrap feeds for EAF steelmaking. Ironmaking and Steelmaking. 46:598-608. 2019
- Diffusion and Flow of CO2 in Carbon Anode for Aluminium Smelting. Metallurgical and Materials Transactions B. 50:846-856. 2019
- Thermodynamic-Based Exergy Analysis of Precious Metal Recovery out of Waste Printed Circuit Board through Black Copper Smelting Process. Energies. 12:1313-1313. 2019
- The behavior of manganese in oxygen steelmaking. Iron and Steel Technology. 16:66-73. 2019
- Solar processing of composite iron ore pellets: Preliminary assessments. Journal of Cleaner Production. 205:1017-1028. 2018
- The Binary Alkali Nitrate and Chloride Phase Diagrams: NaNO3-KNO3, LiNO3-NaNO3, LiNO3-KNO3, and NaCl-KCl. Metallurgical and Materials Transactions B. 49:3580-3593. 2018
- Mass and energy analysis of composite pellet process. Ironmaking and Steelmaking. 45:978-983. 2018
- CFD model simulation of bubble surface area flux in flotation column reactor in presence of minerals. International Journal of Mining Science and Technology. 28:999-1007. 2018
- Dynamic Model of Basic Oxygen Steelmaking Process Based on Multizone Reaction Kinetics: Modeling of Manganese Removal. Metallurgical and Materials Transactions B. 49:2191-2208. 2018
- CFD modeling of bubble column: Influence of physico-chemical properties of the gas/liquid phases properties on bubble formation. Separation and Purification Technology. 201:130-138. 2018
- Dynamic Model of Basic Oxygen Steelmaking Process Based on Multizone Reaction Kinetics: Modeling of Decarburization. Metallurgical and Materials Transactions B. 49:1022-1033. 2018
- Premelting, Melting, and Degradation Properties of Molten Alkali Nitrates: LiNO3, NaNO3, KNO3, and Binary NaNO3-KNO3. Metallurgical and Materials Transactions B. 49:1482-1498. 2018
- Novel multi-stage aluminium production: part 1 – thermodynamic assessment of carbosulphidation of Al₂O₃/bauxite using H₂S and sodiothermic reduction of Al₂S₃. Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy. 127:91-102. 2018
- Dynamic Model of Basic Oxygen Steelmaking Process Based on Multi-zone Reaction Kinetics: Model Derivation and Validation. Metallurgical and Materials Transactions B. 49:537-557. 2018
- Effects of particle size and concentration on bubble coalescence and froth formation in a slurry bubble column. Particuology. 36:82-95. 2018
- Study of Low Flow Rate Ladle Bottom Gas Stirring Using Triaxial Vibration Signals. Metallurgical and Materials Transactions B. 49:423-433. 2018
- Bubbly flow with particle attachment and detachment – A multi-phase CFD study. Separation Science and Technology. 53:181-197. 2018
- Thermodynamic analysis of metals recycling out of waste printed circuit board through secondary copper smelting. Journal of Material Cycles and Waste Management. 20:386-401. 2018
- A thermodynamic-based life cycle assessment of precious metal recycling out of waste printed circuit board through secondary copper smelting. Environmental Development. 24:36-49. 2017
- Novel multi-stage aluminium production: part 2 – experimental investigation on carbosulphidation of Al₂O₃ using H₂S and sodiothermic reduction of Al₂S₃. Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy. 126:245-258. 2017
- CFD analysis of solid particles properties effect in three-phase flotation column. Separation and Purification Technology. 185:1-9. 2017
- Thermal analysis of molten ternary lithium-sodium-potassium nitrates. Renewable Energy. 104:76-87. 2017
- Existence of periodic solutions of a continuous flow bioreactor model with impulsive control in microorganisms. Journal of Applied Mathematics and Computing. 53:471-486. 2017
- Thermodynamics of Palladium (Pd) and Tantalum (Ta) Relevant to Secondary Copper Smelting. Metallurgical and Materials Transactions B. 48:317-327. 2017
- Numerical simulation of froth formation in aerated slurry coupled with population balance modelling. Canadian Metallurgical Quarterly. 56:45-57. 2017
- Thermodynamics Behavior of Germanium During Equilibrium Reactions between FeOx-CaO-SiO2-MgO Slag and Molten Copper. Metallurgical and Materials Transactions B. 47:2889-2903. 2016
- Thermodynamics data of valuable elements relevant to e-waste processing through primary and secondary copper production: a review. Journal of Cleaner Production. 131:795-809. 2016
- Multivariate Analysis of Ladle Vibration. Metallurgical and Materials Transactions B. 47:2681-2689. 2016
- Study of cavity modes in BOF by analysis of sound. Ironmaking and Steelmaking. 43:473-480. 2016
- Techno economic analysis of electronic waste processing through black copper smelting route. Journal of Cleaner Production. 126:178-190. 2016
- Analysis of steelmaking kinetics from IMPHOS pilot plant data. Ironmaking and Steelmaking. 43:358-370. 2016
- Thermodynamics and kinetics analyses of ZrB₂formation in molten aluminium alloys. Canadian Metallurgical Quarterly. 55:161-172. 2016
- 2D condensation model for the inner Solar Nebula: an enstatite-rich environment. Monthly Notices of the Royal Astronomical Society. 457:1359-1370. 2016
- CFD analysis of oxygen steelmaking kinetics and slag foaming using IMPHOS pilot plant data. Iron and Steel Technology. 13:68-73. 2016
- Energy Balance Around Gas Injection into Oxygen Steelmaking. Metallurgical and Materials Transactions B. 47:458-466. 2016
- Mechanism of ZrB2 Formation in Molten Al-V-Zr Alloy During Boron Treatment. Metallurgical and Materials Transactions B. 47:595-607. 2016
- CFD simulation on influence of suspended solid particles on bubbles' coalescence rate in flotation cell. International Journal of Mineral Processing. 146:54-64. 2016
- Wetting behaviour of Cu based alloys on spinel substrates in pyrometallurgical context. Materials Science and Technology. 31:1925-1933. 2015
- Development of high flux solar simulators for solar thermal research. Solar Energy Materials and Solar Cells. 141:436-446. 2015
- More from Less, Generating Wealth from Lower Grade and Urban Metal/Ore Sources. Advanced Materials Research. 1112:481-484. 2015
- Splash Distribution in Oxygen Steelmaking. Metallurgical and Materials Transactions B. 46:863-872. 2015
- Numerical simulation of slag foaming on bath smelting slag (CaO–SiO2–Al2O3–FeO) with population balance modeling. Chemical Engineering Science (CES). 107:165-180. 2014
- Removal of Vanadium from Molten Aluminum-Part I. Analysis of VB2 Formation. Metallurgical and Materials Transactions B. 45:752-768. 2014
- Removal of Vanadium from Molten Aluminum—Part II. Kinetic Analysis and Mechanism of VB2 Formation. Metallurgical and Materials Transactions B. 45:769-783. 2014
- Removal of Vanadium from Molten Aluminum—Part III. Analysis of Industrial Boron Treatment Practice. Metallurgical and Materials Transactions B. 45:784-794. 2014
- Metal Extraction Processes for Electronic Waste and Existing Industrial Routes: A Review and Australian Perspective. Resources. 3:152-179. 2014
- Cathode Characterization with Steel and Copper Collector Bars in an Electrolytic Cell. JOM. 66:235-244. 2014
- Electrically Enhanced Boron Removal from Silicon Using Slag. Metallurgical and Materials Transactions B. 45:1-5. 2014
- Wetting Characteristics of Cryolite-Based Melts on Spinels Substrate. Light Metals 2014. 9781118889084:609-614. 2014
- Analysis of Boron Treatment for V Removal Using AlB 2 and AlB 12 Based Master Alloys. Light Metals. 963-968. 2014
- Kinetic analysis of silicothermic process under flowing argon atmosphere. Canadian Metallurgical Quarterly. 53:17-25. 2014
- Splashing in Oxygen Steelmaking. ISIJ International. 54:836-844. 2014
- Wetting Characteristics of Cryolite-Based Melts on Spinels Substrate. Light Metals. 609-614. 2014
- Investigation of Anodic Gas Film Behavior in Hall–Heroult Cell Using Low Temperature Electrolyte. Metallurgical and Materials Transactions B. 44:1155-1165. 2013
- Dynamic natural gas control via architech solution. SEAISI Quarterly Journal. 42:46-50. 2013
- Numerical simulation of two-phase flow with bubble break-up and coalescence coupled with population balance modeling. Chemical Engineering and Processing - Process Intensification. 70:66-76. 2013
- Alternative Al production methods. Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy. 122:113-121. 2013
- Alternative Al production methods. Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy. 122:87-104. 2013
- Numerical simulation of creaming and foam formation in aerated liquid with population balance modeling. Chemical Engineering Science (CES). 94:69-78. 2013
- Production of Aluminum Sulfide through Carbosulfidation Utilising H 2 S. Light Metals. 1299-1304. 2013
- Optimizing chemical energy into Electric Arc Furnaces. SEAISI Quarterly Journal. 41:17-22. 2012
- Computational Fluid Dynamics (CFD) Investigation of Submerged Combustion Behavior in a Tuyere Blown Slag-fuming Furnace. Metallurgical and Materials Transactions B. 43:1054-1068. 2012
- Principal characteristics of a bubble formation on a horizontal downward facing surface. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 411:94-104. 2012
- Refractory Metal Nuggets – Formation of the first condensates in the Solar Nebula. Icarus. 221:89-105. 2012
- Neural-Net–Based Predictive Modeling of Spout Eye Size in Steelmaking. Metallurgical and Materials Transactions B. 43:571-577. 2012
- Computational Fluid Dynamic Modeling of Zinc Slag Fuming Process in Top-Submerged Lance Smelting Furnace. Metallurgical and Materials Transactions B. 43:39-55. 2012
- A Computational Fluid Dynamics Model of Shrouded Supersonic Jet Impingement on a Water Surface. ISIJ International. 52:1026-1035. 2012
- The effect of the regular solution model in the condensation of protoplanetary dust. Monthly Notices of the Royal Astronomical Society. 414:2386-2405. 2011
- Theoretical Investigation of the Inclined Sidewall Design on Magnetohydrodynamic (MHD) Forces in an Aluminum Electrolytic Cell. Metallurgical and Materials Transactions B. 42:243-253. 2011
- Comprehensive Model of Oxygen Steelmaking Part 1: Model Development and Validation. ISIJ International. 51:1086-1092. 2011
- Comprehensive Model of Oxygen Steelmaking Part 2: Application of Bloated Droplet Theory for Decarburization in Emulsion Zone. ISIJ International. 51:1093-1101. 2011
- Comprehensive Model of Oxygen Steelmaking Part 3: Decarburization in Impact Zone. ISIJ International. 51:1102-1109. 2011
- Inclined Jetting and Splashing in Electric Arc Furnace Steelmaking. ISIJ International. 51:1439-1447. 2011
- A study on supersonic coherent jet characteristics using computational fluid dynamics. AISTech - Iron and Steel Technology Conference Proceedings. 885-894. 2010
- Computational Fluid Dynamics Modeling of Supersonic Coherent Jets for Electric Arc Furnace Steelmaking Process. Metallurgical and Materials Transactions B. 41:1354-1367. 2010
- On-line monitoring of the ladle stirring. AISTech - Iron and Steel Technology Conference Proceedings. 1221-1230. 2010
- Rapid image analysis of ladle eye area using threshold technique. Ironmaking and Steelmaking. 37:620-623. 2010
- Online Analysis of Stirring Processes in Ladle Metallurgy. Metallurgical and Materials Transactions B. 41:1025-1032. 2010
- Computational Fluid Dynamics Simulation of Supersonic Oxygen Jet Behavior at Steelmaking Temperature. Metallurgical and Materials Transactions B. 41:636-645. 2010
- CFD Modeling of Swirl and Nonswirl Gas Injections into Liquid Baths Using Top Submerged Lances. Metallurgical and Materials Transactions B. 41:35-50. 2010
- Analysis of Droplet Generation in Oxygen Steelmaking. ISIJ International. 49:24-28. 2009
- Kinetics of Flux Dissolution in Oxygen Steelmaking. ISIJ International. 49:1474-1482. 2009
- Nucleation and growth of Mg condensate during supersonic gas quenching. Journal of Crystal Growth. 310:2659-2667. 2008
- CFD modelling of heat transfer in supersonic nozzles for magnesium production. TMS Annual Meeting. 123-132. 2007
- High Temperature behaviour of Directly Reduced Iron Fines. Canadian Metallurgical Quarterly. 46:373-378. 2007
- High Temperature behaviour of Directly Reduced Iron Fines. Canadian Metallurgical Quarterly. 46:373-378. 2007
- Ladle Eye Area Measurement using Multivariate Image Analysis. Canadian Metallurgical Quarterly. 46:397-405. 2007
- Challenges in light metals production. Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy. 116:25-33. 2007
- Analysis of interfacial area changes during spontaneous emulsification of metal droplets in slag. Metallurgical and Materials Transactions B. 37:1087-1091. 2006
- Design of supersonic nozzles for ultra-rapid quenching of metallic vapours. TMS Annual Meeting. 2006:699-709. 2006
- The carbothermic route to magnesium. JOM. 58:51-55. 2006
- Nitrogen removal from steel by DRI fines injection. AISTech - Iron and Steel Technology Conference Proceedings. 1:403-412. 2005
- Analysis of the source of dynamic interfacial phenomena during reaction between metal droplets and slag. Metallurgical and Materials Transactions B. 36:591-604. 2005
- Simulation of reactive pellets in a pyrometallurgical bath using SPH. TMS Annual Meeting. 647-654. 2005
- Degradation of MgO Refractory in CaO-SiO2-MgO-FeOx and CaO-SiO2-Al2O3-MgO-FeOx Slags under Complex Flow Conditions. Metallurgical and Materials Transactions B. 36B:453-453. 2005
- Modeling of trajectory and residence time of metal droplets in slag-metal-gas emulsions in oxygen steelmaking. Metallurgical and Materials Transactions B. 36:525-535. 2005
- Kinetics of metal/slag reactions during spontaneous emulsification. Metallurgical and Materials Transactions B. 36:219-227. 2005
- Kinetics of scrap melting in liquid steel. Metallurgical and Materials Transactions B. 36:293-302. 2005
- RESIDENCE TIME OF METAL DROPLETS IN SLAG-METAL-GAS EMULSIONS THROUGH TOP GAS BLOWING. Canadian Metallurgical Quarterly. 44:119-130. 2005
- RESIDENCE TIME OF METAL DROPLETS IN SLAG-METAL-GAS EMULSIONS THROUGH TOP GAS BLOWING. Canadian Metallurgical Quarterly. 44:119-130. 2005
- SLAG LINE DISSOLUTION OF MgO REFRACTORY. Canadian Metallurgical Quarterly. 44:323-330. 2005
- Phase-field modeling of steel scrap melting in a liquid steel bath. AISTech - Iron and Steel Technology Conference Proceedings. 1:833-843. 2004
- Steel ladle sidewall buildup. Iron and Steel Technology. 1:108-113. 2004
- Treatment of Transient Phenomena in Analysis of Slag-Metal-Gas Reaction Kinetics. High Temperature Materials and Processes. 22:359-368. 2003
- Ladle eye detection using multivariate image analysis. Iron and Steelmaker (I and SM). 30:17-21. 2003
- The use of secondary ion mass spectrometry for investigating oxygen in pyrometallurgical reactions. Metallurgical and Materials Transactions B. 34:355-358. 2003
- Generation of Droplets in Slag-Metal Emulsions through Top Gas Blowing. ISIJ International. 43:983-989. 2003
- Online Monitoring of Dynamic Slag Behavior in Ladle Metallurgy. ISIJ International. 43:1286-1288. 2003
- Solidification of industrial mold fluxes. Iron and Steelmaker (I and SM). 30:52-60. 2003
- Spout Eyes Area Correlation in Ladle Metallurgy. ISIJ International. 43:262-263. 2003
- Energy Considerations for Alternative Routes in Metals Production. Green Processing 2002 - Proceedings: International Conference on the Sustainable Proceesing of Minerals. 281-286. 2002
- Future directions in oxygen steelmaking. Iron and Steelmaker (I and SM). 29:17-21. 2002
- Heat-transfer considerations in the bath smelting of composite organic and ferrous wastes. Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy. 111:18-24. 2002
- An Improved Correlation for Predicting Terminal Velocity of Droplets and Bubbles in Slag-Metal-Gas Emulsion.. ISIJ International. 42:1182-1184. 2002
- EnviRONment and other bath smelting processes for treating organic and ferrous wastes. JOM. 50:43-47. 1998
- A new model of velocity distribution of a single-phase fluid flowing in packed beds. Chemical Engineering Science (CES). 53:1375-1385. 1998
- Recent Developments in the Environment Process. Canadian Metallurgical Quarterly. 36:333-340. 1997
- Recent developments in the environment process. Canadian Metallurgical Quarterly. 36:333-340. 1997
- Solid-solution formation between arsenic and antimony oxides. Metallurgical and Materials Transactions B. 25:865-871. 1994
- Thermal separation of arsenic and antimony oxides. Metallurgical and Materials Transactions B. 25:873-884. 1994
- 150th Anniversary of Australian Steel Industry. Iron Steelmaker. 25:35-36.
- 26Al and the Formation of Inner Disk Atmosphere Condensates. LPI Contributions.
- 2D Distribution of Forsterite and Enstatite in Protoplanetary Disks. Meteoritics and Planetary Science Supplement. 5097--5097-.
- Adventure in High Temperature Measurements and Testings. Materials Australia. 46:28-31.
- Attenuation of sound signals in foams for the basic oxygen furnace using physical modelling techniques. Ironmaking and Steelmaking.
- Bubbling in a tundish. Iron and Steel Society Publications. 695-702.
- Cold Modelling of Slag-Matte Emulsions. Proceedings of Materials 98 Conference, Wollongong. 59-64.
- Continuous Electric Steelmaking - Theoretical and Practical Design Issues. Conference Proceedings - International Conference on Indium Phosphide and Related Materials. 21-26.
- Corrosion of MgO by steelmaking slags. Journal of the Australian Ceramic Society. 42:33-38.
- Dephosphorisation of hot metal. Proceedings of Materials 98 conference, Wollongong, IMEA. 47-52.
- Developments in the Modelling of Oxygen Steelmaking
- Effect of AI2)3 and TiO2 additions of the lubrication characteristics of Mould fluxes. Iron and Steel Society Publication. 845-450.
- High Temperature Condensates and Water Vapour in the Solar Nebula. LPI Contributions. 9048--9048-.
- Ladle and Tundish Metallurgy: as held at the 41 st Annual Conference of Metallurgists of CIM(COM 2002).
- Postgraduate Education for the Steel Industry. Proceedings of the 37th Annual Conference of Metallurgists, Canada. 61-72.
- Prehiting of HBI for electric arc furnace. Proceedings of Materials Conference IMEA. 33-40.
- Process modelling for the production of hydrogen-based direct reduced iron in shaft furnaces using different ore grades. Ironmaking and Steelmaking.
- Pyrometallurgical Treatment of Wastes: An Australian Contribution". Proceedings of Pyrometalurgy "95 Confrence London. 232-242.
- Recovering Iron and Zinc values from steel plant dusts with simultaneous destruction of organic wasters: The EnvIRONment Process. Applied Earth Science: Transactions of the Institute of Mining and Metallurgy. 195-198.
- Substituting natural gas with hydrogen: A case study on mass, energy, and emissions in electric arc furnace steelmaking. Ironmaking and Steelmaking.
- The EnvIRONment Process, towards commercialization - A decade of gestation. TMS International Conference.
- The EnvIRONment process - Development and Commercialization. AWWA Sydney. 544-547.
- The influence of power source characteristics on particulate fume generation and composition. IIW Asian Pacific Welding Congress Aukland.
- The influence of the consumable and power supply type on welding fume characteristic. Australiasian Weldign Journal. 42:38-43.
- The performance and charge behaviour in melter/smelter for the production of hot metal in hydrogen DRI-based steelmaking. Ironmaking and Steelmaking.
- The treatment of arsenic and antimony oxides. Light Metals. 25B:277-288.
- Thermodynamic modelling of electric arc furnace. Iron and Steel Society Publications. 635-642.
- Understanding Fume Formation by GMAW. 47th Annual Conference of WTIA, Melbourne.
preprints