Canadian Journal of Civil Engineering
Journal
-
- Overview
-
- Identity
-
- View All
-
Overview
publication venue for
-
Introduction
2013
-
Investigating the performance of Superpave through the mechanistic-empirical (M-E) approach, field-evaluated performance, and laboratory test results: a case study on Ontario highways
2020
-
Propriétés physico-chimiques et performances mécaniques des bétons renforcés par des fibres végétales.
51.
2024
-
How experiencing extreme climate change events can impact people's willingness to pay during a power outage: a case study from the Ottawa, ON 2022 derecho.
51:461-476.
2024
-
A closer look at Toronto's water quality control design criteria for bioretention cells.
51:1-10.
2024
-
Environmental impact on critical responses of lightweight cellular concrete subbase flexible pavements.
51:47-59.
2024
-
Seismic performance assessment of an existing multispan bridge in eastern Canada retrofitted with fiber reinforced elastomeric isolator.
49:1453-1470.
2022
-
Exploring implicit relationships between pavement surface friction and vehicle crash severity using interpretable extreme gradient boosting method.
49:1206-1219.
2022
-
Reinforcement schemes for cold-formed steel joists with a large web opening in the flexural zone: an experimental investigation.
49:758-769.
2022
-
Development length of glass fibre reinforced polymer (GFRP) rebar based on non-uniform bond stress.
49:420-431.
2022
-
Crack grid detection and calculation based on convolutional neural network.
48:1192-1205.
2021
-
Modeling commercial vehicle trip generation at the business-establishment level.
48:669-680.
2021
-
Integrated simulation-based dynamic traffic and transit assignment model for large-scale network.
47:898-907.
2020
-
Investigating the performance of Superpave through the mechanistic–empirical (M-E) approach, field-evaluated performance, and laboratory test results: a case study on Ontario highways.
47:954-961.
2020
-
Microscopic behavioural analysis of cyclist and pedestrian interactions in shared spaces.
47:50-62.
2020
-
Investigation of partially bonded fiber-reinforced elastomeric isolators (PB-FREIs) with nominal vertical tensile loads.
46:669-676.
2019
-
Road users’ behavior and safety analysis of pedestrian–bike shared space: case study of Robson Street in Vancouver.
45:1053-1064.
2018
-
Highway 400 precast concrete inlay panel project: Instrumentation plan, installation, and preliminary results.
45:889-898.
2018
-
Increased hydropower potential at Niagara: a scenario-based analysis.
45:676-683.
2018
-
Maximum acceptable concentration levels of the chemical agent sarin in Canadian and Russian soil types.
43:735-740.
2016
-
A unidirectional agent based pedestrian microscopic model.
42:1114-1124.
2015
-
Tire–pavement noise and wearing course surface characteristics of experimental Canadian road pavement sections.
42:818-825.
2015
-
Assessment of self-learning adaptive traffic signal control on congested urban areas: independent versus coordinated perspectives.
42:353-366.
2015
-
Data imputation and nested seasonality time series modelling for permanent data collection stations: methodology and application to Ontario.
42:287-302.
2015
-
Discussion on “Necessary changes to CSA A23.3-04 (R2010) relevant to punching shear design for unbalanced moment transfer”.
41:774-774.
2014
-
Mechanical properties of reclaimed asphalt pavement — natural aggregate blends for granular base.
41:493-499.
2014
-
Warm mix asphalt by water-containing methodology: a laboratory study on workability properties versus micro-foaming time.
41:183-190.
2014
-
Investigation on use of recycled asphalt shingles in Ontario hot mix asphalt: a Canadian case study.
41:136-143.
2014
-
Linearized sloshing model for 2D tuned liquid dampers with modified bottom geometries.
41:106-117.
2014
-
Impact and damage to structures during the 27 February 2010 Chile tsunami.
40:750-758.
2013
-
Performance of reinforced concrete buildings during the 27 February 2010 Maule (Chile) earthquake.
40:693-710.
2013
-
Performance of steel buildings and nonstructural elements during the 27 February 2010 Maule (Chile) Earthquake.
40:722-734.
2013
-
Pavement performance mechanics of interlocking concrete paver crosswalk designs.
40:583-594.
2013
-
Computational tools for selecting energy conservation measures for retrofitting existing office buildings.
40:445-459.
2013
-
Constitutive flow models for characterizing the rheology of fresh mortar and concrete.
40:475-482.
2013
-
Reliability-based load factors for blast design.
40:461-474.
2013
-
Stiffened plates of rectangular industrial ducts.
40:334-342.
2013
-
An application of energy principles to a mechanical system.
40:101-103.
2013
-
Reliability-based load factors for blast design - Supplement.
40:1-31.
2013
-
Energy absorption potential of light weight concrete floors.
39:1193-1201.
2012
-
Pervious concrete pavement performance modeling: an empirical approach in cold climates.
39:1100-1112.
2012
-
Bond performance of deformed steel bars in concrete produced with coarse recycled concrete aggregate.
39:128-139.
2012
-
Nonlinear behaviour of steel–concrete composite bridges: finite element modelling and experimental verification.
39:191-202.
2012
-
Asphalt pavements surface texture and skid resistance — exploring the reality.
39:1-9.
2012
-
Evaluation of pervious concrete pavement permeability renewal maintenance methods at field sites in Canada.
38:1404-1413.
2011
-
Pavement surface friction and noise: integration into the pavement management system.
37:1331-1340.
2010
-
Quiet and durable pavements: Findings from an Ontario study.
37:1035-1044.
2010
-
Erratum: An implementation model for automated construction materials tracking and locating.
37:929-929.
2010
-
Serviceability design factors for wind-sensitive structures.
37:728-738.
2010
-
An implementation model for automated construction materials tracking and locating.
37:588-599.
2010
-
Detailed analysis of electricity, water, and gas consumption quantities and costs in Toronto’s public schools.
37:25-36.
2010
-
Experimental study of the strength and deformations of carbon fibre reinforced polymer (CFRP) retrofitted reinforced concrete slabs under blast loadThis article is one of a selection of papers published in the Special Issue on Blast Engineering..
36:1366-1377.
2009
-
Fundamental concepts in blast resistance evaluation of structuresThis article is one of a selection of papers published in the Special Issue on Blast Engineering..
36:1292-1304.
2009
-
Response sensitivity of blast-loaded reinforced concrete structures to the number of degrees of freedomThis article is one of a selection of papers published in the Special Issue on Blast Engineering..
36:1305-1320.
2009
-
Simplified analysis of a low-rise building seismically isolated with stable unbonded fiber reinforced elastomeric isolators.
36:1182-1194.
2009
-
0-1 Piecewise linearization approach for interval-parameter nonlinear programming: application to environmental management under uncertaintyA paper submitted to the Journal of Environmental Engineering and Science..
36:1071-1084.
2009
-
Expanded analytical probabilistic stormwater models for use in watershed and master drainage planning.
36:933-943.
2009
-
Fuzzy set approach to condition assessments of novel sustainable pavements in the Canadian climate.
36:754-764.
2009
-
Interval-parameter robust optimization for environmental management under uncertainty.
36:592-606.
2009
-
Resilient modulus properties of granular highway materials.
36:639-654.
2009
-
Introduction to the Special Issue on Blast Engineering.
36:v-v.
2009
-
Analytical estimation of effective discharge for small southern Ontario streams.
35:1414-1426.
2008
-
Assessment of two a posteriori error estimators for elasticity problems.
35:1239-1250.
2008
-
Equivalent mechanical models of tuned liquid dampers with different tank geometries.
35:1088-1101.
2008
-
Optimization of regional waste management systems based on inexact semi-infinite programming.
35:987-998.
2008
-
Concrete pavement surface textures and multivariables frictional performance analysis: a North American case study.
35:727-738.
2008
-
Analytical probabilistic flood routing for urban stormwater management purposes.
35:487-499.
2008
-
Impacts of cathodic protection on pipe break probabilities: a Toronto case study.
35:210-216.
2008
-
Dry-cast concrete masonry products: properties and durabilityThis article is one of a selection of papers published in this Special Issue on Masonry..
34:1413-1423.
2007
-
Effects of waste glass additions on the properties and durability of fired clay brickThis article is one of a selection of papers published in this Special Issue on Masonry..
34:1458-1466.
2007
-
Special issue on masonry - Introduction.
34:V-V.
2007
-
Practical applications for global positioning system data from solid waste collection vehicles.
34:678-681.
2007
-
Ultrasonic pulse velocity for determining the early age properties of dry-cast concrete containing ground granulated blast-furnace slag.
34:682-685.
2007
-
Impact of tridem and trunnion axle groups on premature damage of pavement infrastructure.
34:156-161.
2007
-
Flexural strength of cold-formed steel joists with reinforced web openings.
33:1195-1208.
2006
-
An experimental study into local scour in a channel caused by a 90° bend.
33:902-911.
2006
-
Advanced modelling of concrete deterioration due to reinforcement corrosion.
33:707-718.
2006
-
Tribute / Hommage.
33:v-viii.
2006
-
Redistribution of longitudinal moments in straight, continuous concrete slab – steel girder composite bridges.
33:471-488.
2006
-
Geographic information system (GIS) based decision support for neighbourhood traffic calming.
32:86-98.
2005
-
Special issue on sustainable development - Introduction.
32:IX-XI.
2005
-
The application of knowledge management to support the sustainable analysis of urban transportation infrastructure.
32:58-71.
2005
-
Development of a unique deterioration index, prioritization methodology, and foreign object damage evaluation models for Canadian airfield pavement management.
31:608-618.
2004
-
Discussion of "Influence of effective parameters of non-orthogonal smeared crack approach in seismic response of concrete arch dams".
31:712-713.
2004
-
Generation of floor accelerations for seismic testing of operational and functional building components.
31:646-663.
2004
-
Reply to the discussion by H. Kreuzer on the "Influence of effective parameters of non-orthogonal smeared crack approach in seismic response of concrete arch dams".
31:714-715.
2004
-
Shake table testing of bookcase – partition wall systems.
31:664-676.
2004
-
Structural controls on floc strength and transport.
31:569-578.
2004
-
Assessment of streetcar transit priority options using microsimulation modelling.
30:1000-1009.
2003
-
Reinforcement learning: Introduction to theory and potential for transport applications.
30:981-991.
2003
-
Reply to the discussion by R.D. Watts on "Overview of seismic provisions of the proposed 2005 edition of the National Building Code of Canada".
30:1158-1158.
2003
-
Influence of effective parameters of non-orthogonal smeared crack approach in seismic response of concrete arch dams.
30:890-901.
2003
-
Development of Canadian asphalt pavement deterioration models to benchmark performance.
30:637-643.
2003
-
Overview of seismic provisions of the proposed 2005 edition of the National Building Code of Canada.
30:241-254.
2003
-
User cost savings in eliminating pavement excavations through employing trenchless technologies.
29:751-761.
2002
-
Experimental parametric study on the in-plane stiffness of wood diaphragms.
29:554-566.
2002
-
The August 17, 1999, Kocaeli (Turkey) earthquake damage to structures.
28:715-737.
2001
-
Seismic analysis of hydraulic structures affected by alkali-aggregate reaction: a case study.
28:332-338.
2001
-
Seismic analysis of hydraulic structures affected by alkali-aggregate reaction: a case study.
28:332-338.
2001
-
The August 17, 1999, Kocaeli (Turkey) earthquake — damage to structures.
28:715-737.
2001
-
Suspended sediment concentration and deformation of riverbed in a frazil jammed reach.
27:1120-1129.
2000
-
Behaviour of reinforced concrete frames rehabilitated with concentric steel bracing.
27:433-444.
2000
-
Seismic evaluation and retrofit with steel jackets of reinforced concrete bridge piers detailed with lap-splices.
27:1-16.
2000
-
Analysis of reinforced concrete beams strengthened in flexure with composite laminates: Discussion.
27:834-835.
2000
-
Evaluation of the level of seismic protection afforded to reinforced concrete shear wall systems.
26:572-589.
1999
-
Seismic performance of ductile medium height reinforced concrete frame buildings designed in accordance with the provisions of the 1995 National Building Code of Canada.
26:606-617.
1999
-
Prévision hydrologique par réseaux de neurones artificiels : état de l'art.
26:293-304.
1999
-
Detention time selection for stormwater quality control ponds.
26:72-82.
1999
-
Evaluation of the seismic level of protection afforded to steel moment resisting frame structures designed for different design philosophies.
26:35-54.
1999
-
Detention time selection for stormwater quality control ponds.
26:72-82.
1999
-
Sizing of centralized leaf and yard waste composting facilities.
25:967-973.
1998
-
Effective design width for perforated cold-formed steel compression members.
25:319-330.
1998
-
Seismic performance of ductile and nominally ductile reinforced concrete moment resisting frames. I. Experimental study.
25:331-341.
1998
-
Seismic performance of ductile and nominally ductile reinforced concrete moment resisting frames. II. Analytical study.
25:342-352.
1998
-
Interpretation of pavement deflection measurement data using an elastodynamic stochastic approach.
25:151-160.
1998
-
Structural safety of ultra-twist blind fasteners in tension.
24:211-217.
1997
-
Seismic level of protection for building structures.
24:20-33.
1997
-
Seismic performance of steel moment resisting frames retrofitted with a locally reduced beam section connection.
24:78-89.
1997
-
Structural safety of ultra-twist blind fasteners in tension.
24:211-217.
1997
-
A grey hop, skip, and jump approach: generating alternatives for expansion planning of waste management facilities.
23:1207-1219.
1996
-
Shear lag in slotted HSS tension members.
23:1350-1354.
1996
-
Bridge management by dynamic programming and neural networks.
23:1064-1069.
1996
-
Performance of timber structures during the Hyogo-ken Nanbu earthquake of 17 January 1995.
23:652-664.
1996
-
Seismic design of steel buildings: lessons from the 1995 Hyogo-ken Nanbu earthquake.
23:727-756.
1996
-
Design of extended end-plate connections for hollow section columns.
23:277-286.
1996
-
Falling weight deflectometer data interpretation using dynamic impedance.
23:1-8.
1996
-
Two case studies of dilution models applied to thermal discharges.
23:193-201.
1996
-
Utilization of the relative rigidity concept to predict the failure of pipe systems under explosive loads.
23:107-116.
1996
-
Behaviour of bolted link-column joints in eccentrically braced frames.
22:745-754.
1995
-
Development of a decision support system for the planning of municipal solid waste composting and recycling programs.
22:637-645.
1995
-
Introduction to papers on the 1994 Northridge earthquake.
22:298-299.
1995
-
Performance of steel structures during the 1994 Northridge earthquake.
22:338-360.
1995
-
Seismic weaknesses of some residential wood framed buildings: confirmations from the 1994 Northridge earthquake.
22:403-414.
1995
-
Cyclic behaviour of locally web-stiffened W-shape beams.
22:121-134.
1995
-
Separation between buildings to avoid pounding during earthquakes.
22:164-179.
1995
-
Strong motion accelerograph records from the 1993 Napierville earthquake.
22:190-196.
1995
-
Heuristic and simulation techniques for the scheduling of hazardous waste processing in an integrated treatment facility.
21:752-761.
1994
-
A rapid seismic screening procedure for existing bridges in Canada.
21:626-642.
1994
-
EFFECT OF CONSTRUCTION CRACKS ON THE DESIGN OF ASPHALT PAVEMENTS - REPLY.
21:712-712.
1994
-
Influence of site effects and period-dependent force modification factors on the seismic response of ductile structures.
21:596-604.
1994
-
Reply: Effect of construction cracks on the design of asphalt pavements.
21:712-712.
1994
-
Towards a new base shear format in future NBCC seismic provisions.
21:682-695.
1994
-
Effects of construction cracks on the design of asphalt pavements.
21:410-418.
1994
-
Implications of soil–structure interaction effects on the NBCC 1990 base shear provisions for high-rise buildings.
21:427-438.
1994
-
Seismic shear demand of ductile cantilever walls: a Canadian code perspective.
21:363-376.
1994
-
On the dynamic foundation factor for the National Building Code of Canada: low to medium rise buildings.
21:353-356.
1994
-
Pounding of buildings during earthquakes: a Canadian perspective.
21:251-265.
1994
-
Comparison of near-field mixing zone models for multiport diffusers in the Great Lakes.
21:141-155.
1994
-
Analyse des structures.
20:1081-1082.
1993
-
Household hazardous wastes: options for management.
20:543-549.
1993
-
Discussion: Overview of seismic provision changes in National Building Code of Canada 1990.
20:334-339.
1993
-
Reply: A proposed dynamic foundation factor for the National Building Code of Canada.
20:329-329.
1993
-
Reply: Seismic performance of reinforced concrete ductile moment-resisting frame buildings located in different seismic regions.
20:334-334.
1993
-
Simulation modelling for the sizing of solid waste receiving facilities.
20:220-227.
1993
-
Evaluation of foundation tie requirements in seismic design.
20:73-81.
1993
-
Nonlinear earthquake response of structurally interconnected buildings.
19:560-572.
1992
-
Seismic performance of reinforced concrete ductile moment-resisting frame buildings located in different seismic regions.
19:688-710.
1992
-
Effect of weak foundation on the seismic response of core wall type buildings.
19:530-539.
1992
-
Seismic response and retrofit of industrial brick masonry chimneys.
19:117-128.
1992
-
A proposed dynamic foundation factor for the National Building Code of Canada.
18:974-984.
1991
-
Influence of site amplification of seismic ground motions on forces in building structures.
18:964-973.
1991
-
Modelling the steady-state circulation in a distorted physical model of the Windermere Basin.
18:756-764.
1991
-
Static and dynamic tests of timber shear walls fastened with nails and wood adhesive.
18:749-755.
1991
-
Seismic analysis of links of various lengths in eccentrically braced frames.
18:140-148.
1991
-
Lateral load response of unbraced steel building frames.
17:974-986.
1990
-
Multi-chute systems for high-rise apartment recycling.
17:1044-1047.
1990
-
Static and dynamic analysis of timber shear walls.
17:643-651.
1990
-
An experimental study of static and dynamic responses of prestressed concrete box irder bridges.
17:481-493.
1990
-
Seismic design of base-isolated highway bridges utilizing lead–rubber bearings.
17:413-422.
1990
-
Erratum: Evaluation of base shear provisions in the 1985 edition of the National Building Code of Canada.
16:966-966.
1989
-
Nonlinear analysis of prestressed concrete box girder bridges under flexure.
16:845-853.
1989
-
Reply: Evaluation of the seismic response factor introduced in the 1985 edition of the National Building Code of Canada.
16:961-961.
1989
-
Parameters influencing the design of friction damped structures.
16:753-766.
1989
-
Efficient numerical modelling for the design of friction damped braced steel plane frames.
16:211-218.
1989
-
Evaluation of base shear provisions in the 1985 edition of the National Building Code of Canada.
16:22-35.
1989
-
Effect of damping on the predicted seismic response of tertiary subsystems.
15:616-622.
1988
-
An experimental investigation of the effects of imperfections on the strength of steel box girders.
15:443-449.
1988
-
Behaviour of buried small flexible pipes.
15:486-489.
1988
-
Evaluation of site-specific seismic design requirements for three Canadian cities.
15:409-423.
1988
-
Evaluation of the seismic response factor introduced in the 1985 edition of the National Building Code of Canada.
15:382-388.
1988
-
Geometric imperfections and tolerances for steel box girder bridges.
15:437-442.
1988
-
Seismic behaviour of highway bridges with base isolation.
15:72-78.
1988
-
Seismic response of tuned systems.
14:780-787.
1987
-
A foundation factor for earthquake design using the Canadian code of practice.
14:498-509.
1987
-
Load capacity of uniformly compressed cold-formed steel section with punched web.
14:550-558.
1987
-
Reply: Seismic loading provision changes in National Building Code of Canada 1985.
13:588-589.
1986
-
Rotational ground motion and seismic codes.
12:583-592.
1985
-
Seismic loading provision changes in National Building Code of Canada 1985.
12:653-660.
1985
-
Charts for water hammer in pipelines resulting from valve closure from full opening only.
12:241-264.
1985
-
Reply: Engineering applications of new probabilistic seismic ground-motion maps of Canada.
12:419-420.
1985
-
Strength analysis of RHS double chord joints with separated chords.
12:370-381.
1985
-
Charts for water hammer in high head pump discharge lines resulting from pump failure and check valve closure.
12:137-149.
1985
-
Seismic design forces for cylindrical tanks on ground.
12:12-23.
1985
-
ENGINEERING APPLICATIONS OF NEW PROBABILISTIC SEISMIC GROUND-MOTION MAPS OF CANADA - REPLY.
12:419-420.
1985
-
Charts for water hammer in low head pump discharge lines resulting from water column separation and check valve closure.
11:717-742.
1984
-
Forces at flange–web connections in T-beams.
11:943-954.
1984
-
Analysis of concrete structures subjected to sustained temperature gradients.
11:404-410.
1984
-
Field investigation of out-of-plane deviations for steel box girder bridges.
11:377-386.
1984
-
Engineering applications of new probabilistic seismic ground-motion maps of Canada.
10:670-680.
1983
-
Stochastic analysis of high flows generated by mixed processes.
10:639-648.
1983
-
An experimental investigation of double chord HSS trusses.
10:248-260.
1983
-
Predicting the behaviour of HSS double chord trusses—a comparison with test results.
10:261-270.
1983
-
Stochastic analysis of high flows in some Central British Columbia rivers.
10:205-213.
1983
-
Engineering applications of new probabilistic seismic ground- motion maps of Canada..
10:671-680.
1983
-
In-plane tensile strength of concrete masonry.
9:413-421.
1982
-
Plate reinforced square hollow section T-joints of unequal width.
9:143-148.
1982
-
Parametric study of standard RHS double chord K-joints.
8:456-463.
1981
-
K-joints of double-chord square hollow sections.
7:523-539.
1980
-
Theoretical analysis of haunch-reinforced T-joints in square hollow sections.
6:601-609.
1979
-
Unequal width connections of square hollow sections in Vierendeel trusses.
4:190-201.
1977
-
Seismic design considerations for gravity retaining structures.
3:248-264.
1976
-
Spatial variations in seismic motions.
3:32-46.
1976
-
Cyclic Loading of Externally Reinforced Masonry Walls Confined by Frames.
2:489-493.
1975
-
Dynamic Evaluation of Overturning Moment Reduction Factor Used in Static Seismic Loading.
2:447-453.
1975
-
Analysis of Shear Walls in Large-Panel Construction.
2:357-367.
1975
-
Approximations for Natural Frequencies of Interconnected Walls and Frames.
2:116-119.
1975
-
The Impact of Fracture Mechanics on Engineering Practice.
1:158-166.
1974
-
Stiffening of Shear Walls.
1:85-96.
1974
-
Innovative Solution for Building Infrastructure Asset Management
-
Laboratory mix preparation and investigation of mechanical behaviour of polyurethane-bound porous rubber pavement
has subject area
Identity
International Standard Serial Number (ISSN)
Electronic International Standard Serial Number (EISSN)