Hatem Zurob - McMaster Experts

Affiliations

Faculty of Engineering, McMaster University
Professor, Materials Science and Engineering, Faculty of Engineering
Member, McMaster Steel Research Centre, Faculty of Engineering

Scholarly Activity in McMaster Experts

Co-author Network

Scholarly Activity
Research
Teaching
Contact
View All

selected scholarly activity

academic article
- On the origin of the barrier in the bainite phase transformation. Scripta Materialia Nanostructured Materials. 223:115076-115076. 2023
- Microstructure and Properties of a Low Carbon Bainitic Steel Produced by Conventional and Inverted Two-Step Austempering Processes. Metals and Materials International Metals and Materials (Institute of Metals). 2022
- Modelling of the diffusional austenite-ferrite transformation. International Materials Reviews. 1-30. 2022
- Assessment of Phase Transformations in Binary Fe–Mn Alloys: Effects of Composition and of Plastic Strain. Metals and Materials International Metals and Materials (Institute of Metals). 28:1537-1548. 2022
- Effect of temperature, carbon content and crystallography on the lengthening kinetics of bainitic ferrite laths. Materials Characterization. 187:111860-111860. 2022
- Strength-ductility synergy in a 1.4 GPa austenitic steel with a heterogeneous lamellar microstructure. Journal of Materials Science and Technology. 106:133-138. 2022
- Superior fracture toughness in a high-strength austenitic steel with heterogeneous lamellar microstructure. Acta Materialia Acta Metallurgica et Materialia. 226:117642-117642. 2022
- A novel approach to producing architectured ultra-high strength dual phase steels. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 833:142582-142582. 2022
- Achieving homogeneity in a high-Fe β-Ti alloy laser-printed from blended elemental powders. Materials and Design. 210:110072-110072. 2021
- Mechanical properties and precipitation behavior of high strength hot-rolled ferritic steel containing Nb and V. Journal of Materials Research and Technology. 14:2061-2070. 2021
- Effect of Heat Treatment on Microstructure Evolution of X38CrMoV5-1 Hot-Work Tool Steel Produced by L-PBF. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 52:2564-2575. 2021
- Mechanical Properties of Ausformed Carbide-Free Bainite. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 52:2402-2410. 2021
- On the Decarburization of Surface Pearlite. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 52:3198-3203. 2021
- The effect of chemical patterning induced by cyclic plasticity on the formation of precipitates during aging of an Al–Mg–Si alloy. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 815:141265-141265. 2021
- Atomic-scale Investigation of Liquid-Metal-Embrittlement Crack-path: Revealing Mechanism and Role of Grain Boundary Chemistry. Acta Materialia Acta Metallurgica et Materialia. 204:116519-116519. 2021
- In Situ Study on Interrupted Growth Behavior and Crystallography of Bainite. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 52:817-825. 2021
- Calculation of Initial Stage of Solidified Shell Deformation during δ to γ Transformation in Mold. Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 107:112-120. 2021
- Crystal plasticity based modeling of grain boundary sliding in magnesium alloy AZ31B sheet. Transactions of Nonferrous Metals Society of China Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals. 31:138-155. 2021
- NbC precipitation during two-pass hot deformation of a nickel-based model alloy at 700 °C: Experiments and modelling. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 802:140447-140447. 2021
- Workshop focuses on the rise in MSE undergraduates. MRS Bulletin. 46:5-11. 2021
- Increasing Necking Strain through Corrugation: Identifying Composite Systems That Can Benefit from Corrugated Geometry. Materials. 13:5175-5175. 2020
- New insights into the effects of deformation below-M on isothermal kinetics of bainitic transformation. Journal of Materials Research and Technology. 9:15750-15758. 2020
- Transformation kinetics of carbide-free bainitic steels during isothermal holding above and below MS. Journal of Materials Research and Technology. 9:13594-13606. 2020
- Novel approach for the development of tailored heterogenous structures in steel. Materialia. 13:100831-100831. 2020
- Use of in-situ laser-ultrasonics measurements to develop robust models combining deformation, recovery, recrystallization and grain growth. Materialia. 12:100812-100812. 2020
- Environment Effects on Chromia (Cr2O3) Scale Stability Formed on Type 310S Stainless Steel During Wet Oxidation. Corrosion. 76:678-689. 2020
- A Physics-Based Mean-Field Model for Ferrite Recovery and Recrystallization. Metals. 10:622-622. 2020
- Ti–5Al–5Mo–5V–3Cr bone implants with dual-scale topography: a promising alternative to Ti–6Al–4V. Nanotechnology. 31:235101-235101. 2020
- Evaluating the Effect of the Competition between NbC Precipitation and Grain Size Evolution on the Hot Ductility of Nb Containing Steels. Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 106:429-437. 2020
- NbC precipitation during multi-pass deformation of a nickel-based model alloy: Experiments and modelling. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 772:138748-138748. 2020
- Austenite Grain Growth in High Manganese Steels. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 50:5760-5766. 2019
- Calculation of Initial Stage of Solidified Shell Deformation during <i>γ</i> to <i>δ</i> Transformation in Mold. ISIJ International. 59:2036-2043. 2019
- Corrosion Evaluation of Ferritic Stainless Steels for Automotive Exhaust Applications. Corrosion. 75:1276-1280. 2019
- Effects of solutes and temperature on high-temperature deformation and subsequent recovery in hot-rolled low alloy steels. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 765:138324-138324. 2019
- Control of edge breaks during cold mill processing of commercial and drawing quality low-carbon steels. Ironmaking and Steelmaking. 46:656-662. 2019
- Effect of Solute Nb on Grain Growth in Fe-30 Pct Mn Steel. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 50:3674-3682. 2019
- Study of processing, microstructure and mechanical properties of hot rolled ultra-high strength steel. Ironmaking and Steelmaking. 46:535-541. 2019
- Evaluating the Effect of the Competition between NbC Precipitation and Grain Size Evolution on the Hot Ductility of Nb Containing Steels. ISIJ International. 59:1064-1071. 2019
- Novel gusset plate design using high strength steel and heat treatment. Journal of Constructional Steel Research. 157:59-69. 2019
- Strong and ductile steel via high dislocation density and heterogeneous nano/ultrafine grains. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 759:1-10. 2019
- Control of Upstream Austenite Grain Coarsening during the Thin-Slab Cast Direct-Rolling (TSCDR) Process. Metals. 9:158-158. 2019
- Effect of Mn and C on Grain Growth in Mn Steels. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 50:905-914. 2019
- Effect of Strain Rate on the Bainitic Transformation in Fe-C-Mn-Si Medium-Carbon Bainitic Steels. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 50:573-580. 2019
- Characterization of the Isothermal Precipitation Kinetics of an Al-Zn-Mg-Cu Alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 49:5157-5168. 2018
- Silicon effects on the wet oxidation of type 310 stainless steel. Corrosion Science. 143:376-389. 2018
- Development of medium-to-high carbon hot-rolled steel strip on a thin slab casting direct strip production complex. Ironmaking and Steelmaking. 45:603-610. 2018
- Multi-scale Examination of the Microstructure Evolution of AZ31 During Multi-pass Cross-Rolling. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 49:3674-3682. 2018
- Additive manufacturing of a novel Ti-Al-V-Fe alloy using selective laser melting. Additive Manufacturing. 21:529-535. 2018
- Effect of C and N and their absence on the kinetics of austenite-ferrite phase transformations in Fe-0.5Mn alloy. Acta Materialia Acta Metallurgica et Materialia. 150:224-235. 2018
- Comparing the effect of geometry on the stress-strain response of isolated corrugation structures and corrugation reinforced composite structures. Composite Structures. 187:308-315. 2018
- Effect of water vapour partial pressure on the chromia (Cr₂O₃)-based scale stability. Canadian Metallurgical Quarterly. 57:89-98. 2018
- On growth and form a metallurgical viewpoint. Canadian Metallurgical Quarterly. 57:38-45. 2018
- Corrugation Reinforced Composites: A Method for Filling Holes in Material-Property Space. Advanced Engineering Materials. 20:1700834-1700834. 2018
- Using architectured materials to control localized shear fracture. Acta Materialia Acta Metallurgica et Materialia. 143:298-305. 2018
- Coupled solute drag and transformation stasis during ferrite formation in Fe-C-Mn-Mo. Acta Materialia Acta Metallurgica et Materialia. 139:62-74. 2017
- Foreword. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 48:2713-2713. 2017
- A polycrystal plasticity based discontinuous dynamic recrystallization simulation method and its application to copper. International Journal of Plasticity. 91:48-76. 2017
- Interface Segregation and Nitrogen Measurement in Fe–Mn–N Steel by Atom Probe Tomography. Microscopy and Microanalysis. 23:385-395. 2017
- Investigation of solute/interphase interaction during ferrite growth. Acta Materialia Acta Metallurgica et Materialia. 124:536-543. 2017
- Characterizing precipitate evolution of an Al–Zn–Mg–Cu-based commercial alloy during artificial aging and non-isothermal heat treatments by in situ electrical resistivity monitoring. Materials Characterization. 117:47-56. 2016
- Modelling of uniaxially pre-strained and annealed AZ31 magnesium sheet based on microstructural considerations. Acta Materialia Acta Metallurgica et Materialia. 113:155-169. 2016
- Solute Segregation During Ferrite Growth: Solute/Interphase and Substitutional/Interstitial Interactions. JOM. 68:1329-1334. 2016
- Molecular Dynamics Study of Solute Pinning Effects on Grain Boundary Migration in the Aluminum Magnesium Alloy System. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 47:1889-1897. 2016
- Bending properties of functionally graded 300M steels. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 653:63-70. 2016
- Static softening following multistage hot deformation of 7150 aluminum alloy: Experiment and modeling. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 648:164-177. 2015
- The coupled solute drag effect during ferrite growth in Fe–C–Mn–Si alloys using controlled decarburization. Acta Materialia Acta Metallurgica et Materialia. 100:333-343. 2015
- Hot deformation behaviour of Ni–30Fe–C and Ni–30Fe–Nb–C model alloys. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 641:160-171. 2015
- Overview of the current issues in austenite to ferrite transformation and the role of migrating interfaces therein for low alloyed steels. Materials Science and Engineering: R: Reports Materials Science Reports. 92:1-38. 2015
- New insights into the limit for non-partitioning ferrite growth. Acta Materialia Acta Metallurgica et Materialia. 86:286-294. 2015
- New insights to the effects of ausforming on the bainitic transformation. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 626:34-40. 2015
- Model Fe-Al Steel with Exceptional Resistance to High Temperature Coarsening. Part I: Coarsening Mechanism and Particle Pinning Effects. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 46:178-189. 2015
- Model Fe-Al Steel with Exceptional Resistance to High Temperature Coarsening. Part II: Experimental Validation and Applications. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 46:190-198. 2015
- A comprehensive molecular dynamics study of low-angle grain boundary mobility in a pure aluminum system. Acta Materialia Acta Metallurgica et Materialia. 74:39-48. 2014
- Analytical Model of the Unbending Behavior of Corrugated Reinforcements. Advanced Engineering Materials. 16:872-877. 2014
- Multiscale Modeling of Phase Transformations in Steels. JOM. 66:740-746. 2014
- Mechanical Behavior of Carbide-free Medium Carbon Bainitic Steels. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 45:1352-1361. 2014
- An Original Way for Producing a 2.4 GPa Strength Ductile Steel by Rolling of Martensite. ISIJ International. 54:235-239. 2014
- Foreword. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 44:3434-3435. 2013
- Mechanical behavior of a compositionally graded 300M steel. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 578:140-149. 2013
- Quantifying the Solute Drag Effect on Ferrite Growth in Fe-C-X Alloys Using Controlled Decarburization Experiments. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 44:3472-3483. 2013
- Self-Consistent Model for Planar Ferrite Growth in Fe-C-X Alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 44:3456-3471. 2013
- Driving Force and Logic of Development of Advanced High Strength Steels for Automotive Applications. Steel Research International. 84:n/a-n/a. 2013
- A Novel Approach to Model Static Recrystallization of Austenite During Hot Rolling of Nb Microalloyed Steel. Part I: Precipitate-Free Case. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 44:1862-1871. 2013
- Austenite particle coarsening and delta-ferrite grain growth in model Fe–Al alloy. Canadian Metallurgical Quarterly. 52:90-97. 2013
- Diffusion as a method for producing architectured materials. Scripta Materialia Nanostructured Materials. 68:17-21. 2013
- Growth of austenite from as-quenched martensite during intercritical annealing in an Fe–0.1C–3Mn–1.5Si alloy. Acta Materialia Acta Metallurgica et Materialia. 61:697-707. 2013
- Vacancy Behavior and Solute Cluster Growth During Natural Aging of an Al-Mg-Si Alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 43:4507-4513. 2012
- The effect of solute on discontinuous dynamic recrystallization. Acta Materialia Acta Metallurgica et Materialia. 60:6390-6404. 2012
- Recrystallization, Precipitation Behaviors, and Refinement of Austenite Grains in High Mn, High Nb Steel. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 43:665-676. 2012
- Kinetics of Delta-Ferrite to Austenite Phase Transformation in a Two-Phase Fe-Al-C Alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 42:3349-3357. 2011
- Abnormal and post-abnormal austenite grain growth kinetics in Nb–Ti microalloyed steels. Canadian Metallurgical Quarterly. 50:389-395. 2011
- Effect of chemical composition on work hardening of Fe—Mn—C TWIP steels. Materials Science and Technology. 27:707-709. 2011
- Deformation twinning as a strengthening mechanism in microtruss cellular materials. Scripta Materialia Nanostructured Materials. 63:609-612. 2010
- Study of Grain-Growth Kinetics in Delta-Ferrite and Austenite with Application to Thin-Slab Cast Direct-Rolling Microalloyed Steels. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 41:2112-2120. 2010
- Microstructural features controlling the deformation and recrystallization behaviour Fe–30%Mn and Fe–30%Mn–0.5%C. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 527:3785-3791. 2010
- Studies on softening kinetics of niobium microalloyed steel using stress relaxation technique. Frontiers of Materials Science in China. 4:197-201. 2010
- Mesoscale simulations of the kinetics of solid–solid phase transformations: Selecting the relevant interfacial compositions for shape-preserved growth. Comptes Rendus Physique Comptes Rendus de l'Academie des Sciences - Series IV: Physics, Astrophysics. 11:257-264. 2010
- Compositionally Graded Steels: A Strategy for Materials Development. Advanced Engineering Materials. 11:992-999. 2009
- Microstructural characterization of transformable Fe–Mn alloys at different length scales. Materials Characterization. 60:1224-1231. 2009
- Study of the early stages of clustering in Al–Mg–Si alloys using the electrical resistivity measurements. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 525:186-191. 2009
- Decarburization as a tool to explore parallels between solid-solid and liquid-solid transformations: Fe-C-Mn-Si steels. Transactions of the Indian Institute of Metals. 62:255-260. 2009
- Modelling discontinuous dynamic recrystallization using a physically based model for nucleation. Acta Materialia Acta Metallurgica et Materialia. 57:5218-5228. 2009
- On the effect of pre-recovery on subsequent recrystallization. Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques International Journal of Materials Research. 100:1446-1448. 2009
- Microstructural evolution and strain hardening of Fe–24Mn and Fe–30Mn alloys during tensile deformation. Acta Materialia Acta Metallurgica et Materialia. 57:3978-3988. 2009
- A model for the growth of solute clusters based on vacancy trapping. Scripta Materialia Nanostructured Materials. 61:141-144. 2009
- Kinetic transitions during non-partitioned ferrite growth in Fe–C–X alloys. Acta Materialia Acta Metallurgica et Materialia. 57:2781-2792. 2009
- AIST transactions. Iron and Steel Technology. 6:164. 2009
- On the activation of recrystallization nucleation sites in Cu and Fe. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 502:70-78. 2009
- The comparative effectiveness of Nb solute and NbC precipitates at impeding grain-boundary motion in Nb steels. Scripta Materialia Nanostructured Materials. 59:635-637. 2008
- A transition from local equilibrium to paraequilibrium kinetics for ferrite growth in Fe–C–Mn: A possible role of interfacial segregation. Acta Materialia Acta Metallurgica et Materialia. 56:2203-2211. 2008
- Quantifying the Solute Drag Effect of Cr on Ferrite Growth Using Controlled Decarburization Experiments. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 38:2950-2955. 2007
- Modelling isothermal and non-isothermal recrystallisation kinetics: Application to Zircaloy-4. Journal of Nuclear Materials. 366:178-186. 2007
- Modeling of the dynamics of transient liquid films in ternary systems. Journal of Phase Equilibria and Diffusion Journal of Phase Equilibria. 27:699-706. 2006
- Quantitative criterion for recrystallization nucleation in single-phase alloys: Prediction of critical strains and incubation times. Acta Materialia Acta Metallurgica et Materialia. 54:3983-3990. 2006
- Analysis of the Effect of Mn on the Recrystallization Kinetics of High Nb Steel: An Example of Physically-based Alloy Design. ISIJ International. 45:713-722. 2005
- Rationalization of the softening and recrystallization behaviour of microalloyed austenite using mechanism maps. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 382:64-81. 2004
- A novel experimental approach to identifying kinetic transitions in solid state phase transformations. Scripta Materialia Nanostructured Materials. 50:285-290. 2004
- Modeling recrystallization of microalloyed austenite: effect of coupling recovery, precipitation and recrystallization. Acta Materialia Acta Metallurgica et Materialia. 50:3075-3092. 2002
- Modeling recrystallization of microalloyed austenite: effect of coupling recovery, precipitation and recrystallization. Acta Materialia Acta Metallurgica et Materialia. 50:3077-3094. 2002
- A model for the competition of precipitation and recrystallization in deformed austenite. Acta Materialia Acta Metallurgica et Materialia. 49:4183-4190. 2001
- The Design of 'Grain Boundary Engineered' Architected Cellular Materials: The Role of 5-7 Defects in Hexagonal Honeycombs
chapter
- Processing of Ferrous Alloys. 37-82. 2021
- Heterogeneous Grain Microstructure Reducing/Eliminating Edge Breaks in Low Carbon Steels. Minerals, Metals and Materials Series. 249-262. 2020
- A New Alloy System Having Autogenous Grain Pinning at High Temperature: In: Lambotte G., Lee J., Allanore A., Wagstaff S. (eds) Materials Processing Fundamentals 2019. The Minerals, Metals & Materials Series. Springer, Cham. Minerals, Metals and Materials Series. 73-86. 2019
- On Control of Grain Coarsening of Austenite by Nano-Scale Precipitate Engineering of TiN-NbC Composite in Ti-Nb Microalloyed Steel. 119-124. 2016
- Hot Deformation Behavior of an Fe-Al Steel in the Two Phase Region. 927-933. 2014
- Physically-Based Model for Static Recrystallization in AZ31. 149-153. 2014
conference paper
- Development of hot rolled ultra-high strength steel with enhanced mechanical properties. Materials Science and Technology 2018, MS and T 2018. 1182-1189. 2019
- Comparative Corrosion Evaluation of Ferritic Stainless Steels Utilized in Automotive Exhaust Applications. SAE Technical Papers. 2018
- Development of Hot Rolled Ultra-High Strength Steel with Enhanced Mechanical Properties. Contributed Papers from MS&T17. 1182-1189. 2018
- Development of Hot Rolled Ultra-High Strength Steel with Enhanced Mechanical Properties. Contributed Papers from MS&T17. 1182-1189. 2018
- Increasing Rotational Capacity of Gusset Plates through Heat Treatment. 6th International Structural Specialty Conference 2018, Held as Part of the Canadian Society for Civil Engineering Annual Conference 2018. 459-468. 2018
- Austenite Grain Coarsening Behavior in V-Ti Microalloyed Steels during Reheating Process. Contributed Papers from MS&T17. 811-818. 2017
- Austenite grain coarsening behavior in V-Ti microalloyed steels during reheating process. Materials Science and Technology Conference and Exhibition 2017, MS and T 2017. 811-818. 2017
- On Control of Grain Coarsening of Austenite by Nano-Scale Precipitate Engineering of TiN-NbC Composite in Ti-Nb Microalloyed Steel. Proceedings of the 6th International Conference on Recrystallization and Grain Growth, ReX and GG 2016. 119-124. 2016
- A Comparison of Ferrite Growth Kinetics under Denitriding and Decarburizing Conditions. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 2449-2454. 2015
- Application of 3D atom probe tomography to the segregation of solutes at austenite/ferrite interfaces. PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. 655-662. 2015
- In situ characterization of precipitate formation and dissolution in an Al-Zn-Mg-Cu alloy by electrical resistivity measurement. PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. 727-734. 2015
- Preface. PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. xxxxi. 2015
- Hot Deformation Behavior of an Fe-Al Steel in the Two Phase Region. TMS 2014 SUPPLEMENTAL PROCEEDINGS. 927-933. 2014
- Physically-Based Model for Static Recrystallization in AZ31. Magnesium Technology. 149-153. 2014
- Influence of Microstructural Length Scale on the Strength and Annealing Behavior of Pearlite, Bainite, and Martensite. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 1454-1461. 2013
- Novel Approach to Model Static Recrystallization of Austenite during Hot-Rolling of Nb-Microalloyed Steel: Effect of Precipitates. Journal of Metastable and Nanocrystalline Materials. 417-422. 2013
- Recrystallization and Grain Coarsening Control in Processing High Niobium Microalloyed Line Pipe Steels. Journal of Metastable and Nanocrystalline Materials. 391-396. 2013
- Microtruss Cellular Nanocomposites. TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND INTERFACES. 337-344. 2012
- Modelling Discontinuous Dynamic Recrystallization Using a Physically-Based Model for Nucleation. Journal of Metastable and Nanocrystalline Materials. 492-497. 2012
- Studies on Softening Kinetics of Niobium Microalloyed Steel Using Stress Relaxation Technique. Journal of Metastable and Nanocrystalline Materials. 794-799. 2012
- ALEMI: A Ten-Year History of Discussions of Alloying-Element Interactions with Migrating Interfaces. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 3703-3718. 2011
- Stability of Retained Austenite in High-Al, Low-Si TRIP-Assisted Steels Processed via Continuous Galvanizing Heat Treatments. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 3627-3637. 2011
- Studies on softening kinetics of low manganese steel microalloyed with niobium for high-strength sour service ERW pipe. International Symposium on the Recent Developments in Plate Steels. 365-374. 2011
- Kinetic Transitions during Non-Partitioned Ferrite Growth in Fe-C-Mn Alloys. Diffusion and Defect Data Pt.B: Solid State Phenomena Solid State Phenomena. 539-548. 2011
- Mechanical behavior and microstructural evolution of Fe-22Mn-C TWIP/TRIP steels as a function of C content. Materials Science and Technology Conference and Exhibition 2010, MS and T'10. 1914-1925. 2010
- Mechanical behavior and microstructural evolution of Fe-22Mn-C TWIP/TRIP steels as a function of C content. AIST Steel Properties and Applications Conference Proceedings - Combined with MS and T'10, Materials Science and Technology 2010. 299-310. 2010
- Bulk nanoscale materials in steel products. Journal of Physics: Conference Series. 012135-012135. 2010
- Fracture behaviour of Compositionally graded steels (CGS). 12th International Conference on Fracture 2009, ICF-12. 7250-7257. 2009
- Microstructural evolution and strain-hardening of Fe-30Mn during tensile deformation. Materials Science and Technology Conference and Exhibition 2009, MS and T'09. 1412-1422. 2009
- The effect of carbon content on the microstructure and mechanical properties of high-Mn steels. Materials Science and Technology Conference and Exhibition 2009, MS and T'09. 1381-1390. 2009
- Effect of galvanizing heat treatments on the microstructure and properties of Al-Si TRIP assisted steels during plastic deformation. Materials Science and Technology Conference and Exhibition, MS and T'08. 1427-1438. 2008
- Mechanism and kinetics of clustering in naturally-aged Al-Mg-Si alloys. Materials Science and Technology Conference and Exhibition, MS and T'07 - "Exploring Structure, Processing, and Applications Across Multiple Materials Systems". 1734-1742. 2007
- Effect of Nb on Ferrite Recrystallization and Austenite Decomposition in Microalloyed Steels. Steel Research International. 210-215. 2007
- Effect of Low-Temperature Recovery Treatments on Subsequent Recrystallization in Al-2.5%Mg. Journal of Metastable and Nanocrystalline Materials. 381-386. 2007
- Effect of Low-Temperature Recovery Treatments on Subsequent Recrystallization in Al-2.5%Mg. Journal of Metastable and Nanocrystalline Materials. 381-386. 2007
- The Comparative Effectiveness of Nb Solute and NbC Precipitates at Impeding Grain Boundary Motion in Nb-Steels. Journal of Metastable and Nanocrystalline Materials. 53-56. 2007
- Modeling of the Dynamics of Transient Liquid Films in Ternary Systems. Journal of Phase Equilibria and Diffusion Journal of Phase Equilibria. 699-714. 2006
- The growth of ferrite in Fe-C-X alloys: The role of thermodynamics, diffusion, and interfacial conditions. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 1711-1720. 2006
- Diffusion and Phase Transformations in Steels: a Tool for Experimentation and a Method for Modelling. Defect and Diffusion Forum. 239-246. 2006
- Diffusion and Phase Transformations in Steels: a Tool for Experimentation and a Method for Modelling. Defect and Diffusion Forum. 239-246. 2006
- Effect of structure on the creep of open-cell nickel foams. Journal of Materials Science Interface Science Journal of Materials Science Letters. 5893-5901. 2005
- A study of the austenite to ferrite transformation in Fe-C-X alloys using decarburization experiments. Solid-Solid Phase Transformations in Inorganic Materials 2005, Vol 1. 111-116. 2005
- Analysis of Mn Effect on Recrystallization Kinetics in High Nb Steels. Journal of Metastable and Nanocrystalline Materials. 123-130. 2005
- Studies of the influence of alloying elements on the growth of ferrite from austenite under decarburization conditions: Fe-C-Nl alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 1237-1242. 2004
- Investigation of the interaction between recovery and precipitation in a model austenitic alloy: Experimental and modelling results. AUSTENITE FORMATION AND DECOMPOSITION. 121-138. 2003
- The diffusional formation of allotriomorphic ferrite from austenite in FE-C-X systems. The simplest case: Fe-C-Ni. AUSTENITE FORMATION AND DECOMPOSITION. 49-63. 2003
- The precipitation of NbC on dislocations in austenite. Applied Physics A: Materials Science and Processing. s1213-s1215. 2002