publication venue for
- Cholic acid is a versatile coating-forming dispersant for electrophoretic deposition of diamond, graphene, carbon dots and polytetrafluoroethylene 2020
- Integrated ECR-PECVD and magnetron sputtering system for rare-earth-doped Si-based materials 2018
- Luminescent characteristics of InGaAsP/InP multiple quantum well structures by impurity-free vacancy disordering 2006
- Tribological adaptability of TiAlCrN PVD coatings under high performance dry machining conditions 2005
- Nano-crystalline filtered arc deposited (FAD) TiAlN PVD coatings for high-speed machining applications 2004
- Advances in the characterisation of multilayered coatings using electron energy loss spectroscopy in the transmission electron microscope 1998
- Elastic recoil detection (ERD) of light elements in the near-surface region of Zr and its alloys following corrosion 1996
- Design of coatings to minimize tool crater wear 1993
- In-situ monitoring of electron cyclotron resonance plasma chemical vapour deposition of hydrogenated silicon nitride films 1993
- On the reactive wetting of Fe-Mn-Sb alloys during continuous hot-dip galvanizing. 495:131576. 2025
- Enhancement of carbide tool performance during dry machining through a combination of laser surface texturing and tungsten disulfide soft coatings. 428:127849-127849. 2021
- A systematic study on the effect of coating type and surface preparation on the wettability of Si-Bronze brazing filler material on GI and GA-coated DP600. 425:127735-127735. 2021
- A study of mechanical and tribological properties as well as wear performance of a multifunctional bilayer AlTiN PVD coating during the ultra-high-speed turning of 304 austenitic stainless steel. 423:127577-127577. 2021
- Anodic plasma electrolytic deposition of composite coating on ferrous alloys with low thermal conductivity and high adhesion strength. 398:126081-126081. 2020
- The influence of modified annealing during the galvanizing process on the resistance spot welding of the CMn1.8Si advanced high strength steel. 381:125181-125181. 2020
- Mechanism of superhydrophilic to superhydrophobic transition of femtosecond laser-induced periodic surface structures on titanium. 378:124931-124931. 2019
- Surface modification of binder-jet additive manufactured Inconel 625 via electrospark deposition. 362:141-149. 2019
- On the reactive wetting of a medium-Mn advanced high-strength steel during continuous galvanizing. 357:418-426. 2019
- Effect of dew point on the reactive wetting of a C-2Mn-1.3Si (wt%) advanced high strength steel during continuous galvanizing. 351:11-20. 2018
- Effect of coating weight on fiber laser welding of Galvanneal-coated 22MnB5 press hardening steel. 337:536-543. 2018
- Corrosion performance of medical grade NiTi after laser processing. 324:478-485. 2017
- Wear behaviour of coated carbide tools during machining of Ti6Al4V aerospace alloy associated with strong built up edge formation. 313:319-327. 2017
- The effect of pure aluminum cold spray coating on corrosion and corrosion fatigue of magnesium (3% Al-1% Zn) extrusion. 309:423-435. 2017
- Dual-topography electrical discharge machining of titanium to improve biocompatibility. 296:149-156. 2016
- Tribo-films control in adaptive TiAlCrSiYN/TiAlCrN multilayer PVD coating by accelerating the initial machining conditions. 294:54-61. 2016
- Wear performance of different PVD coatings during hard wet end milling of H13 tool steel. 279:118-125. 2015
- On the in situ Aluminothermic Reduction of MnO in the Continuous Galvanizing Bath. 212:152-158. 2012
- Effects of coating thickness on thermal conductivities of alumina coatings and alumina/aluminum hybrid materials prepared using plasma electrolytic oxidation. 207:96-101. 2012
- Tribology characteristics of in-situ laser deposition of Fe-TiC. 206:4495-4501. 2012
- Electrodeposition of cerium oxide films and composites. 206:1-7. 2011
- The influence of combined laser parameters on in-situ formed TiC morphology during laser cladding. 206:124-131. 2011
- Cutting performance of different coatings during minimum quantity lubrication drilling of aluminum silicon B319 cast alloy. 205:4107-4116. 2011
- Deposition, characterization and performance evaluation of ceramic coatings on metallic substrates for supercritical water-cooled reactors. 205:3512-3519. 2011
- Effect of laser cladding process parameters on clad quality and in-situ formed microstructure of Fe–TiC composite coatings. 205:2007-2015. 2010
- Emergent behavior of nano-multilayered coatings during dry high-speed machining of hardened tool steels. 204:3425-3435. 2010
- Structure, properties and wear performance of nano-multilayered TiAlCrSiYN/TiAlCrN coatings during machining of Ni-based aerospace superalloys. 204:3698-3706. 2010
- Multi-functional nano-multilayered AlTiN/Cu PVD coating for machining of Inconel 718 superalloy. 204:2465-2471. 2010
- Design and performance of AlTiN and TiAlCrN PVD coatings for machining of hard to cut materials. 204:489-496. 2009
- Oxidation post-treatment of hard AlTiN coating for machining of hardened steels. 204:256-262. 2009
- Machining performance of TiN coatings incorporating indium as a solid lubricant. 203:3370-3376. 2009
- Mass loss of copper alloy electrode during TiB2 coating by electrospark deposition. 203:3333-3337. 2009
- Coating optimisation for high speed machining with advanced nanomechanical test methods. 203:1919-1925. 2009
- Electrophoretic deposition of polymer-carbon nanotube–hydroxyapatite composites. 203:1481-1487. 2009
- Electrodeposition of hydroxyapatite–silver–chitosan nanocomposite coatings. 202:3815-3821. 2008
- Effect of temperature of annealing below 900 °C on structure, properties and tool life of an AlTiN coating under various cutting conditions. 202:2985-2992. 2008
- Wear behavior of adaptive nano-multilayered TiAlCrN/NbN coatings under dry high performance machining conditions. 202:2015-2022. 2008
- Erratum to “Investigating the correlation between nano-impact fracture resistance and hardness/modulus ratio from nanoindentation at 25–500 °C and the fracture resistance and lifetime of cutting tools with Ti1−Al N (x= 0.5 and 0.67) PVD coatings in milling operations” [Surface and Coatings Technology 201 (2007) 4585–4593]. 201:8001-8001. 2007
- Manganese deposition without additives. 201:7739-7745. 2007
- Investigating the correlation between nano-impact fracture resistance and hardness/modulus ratio from nanoindentation at 25–500 °C and the fracture resistance and lifetime of cutting tools with Ti1−xAlxN (x=0.5 and 0.67) PVD coatings in milling operations. 201:4585-4593. 2007
- Oxidation tuning in AlCrN coatings. 201:4505-4511. 2007
- Spinel coatings for UNS 430 stainless steel interconnects. 201:4677-4684. 2007
- Impact of annealing on microstructure, properties and cutting performance of an AlTiN coating. 201:3524-3529. 2006
- Surface modification of resistance welding electrodes by electro-spark deposited composite coatings. 201:2419-2430. 2006
- Self-adaptive wear behavior of nano-multilayered TiAlCrN/WN coatings under severe machining conditions. 201:1852-1860. 2006
- Surface modification of resistance welding electrode by electro-spark deposited composite coatings: Part I. Coating characterization. 201:1503-1510. 2006
- Effect of mechanical properties measured at room and elevated temperatures on the wear resistance of cutting tools with TiAlN and AlCrN coatings. 200:5738-5742. 2006
- Cathodic electrolytic deposition of zirconia films. 195:138-146. 2005
- Improvement of ‘duplex’ PVD coatings for HSS cutting tools by ion mixing. 187:230-237. 2004
- Tribology of tool–chip interface and tool wear mechanisms. 149:151-160. 2002
- Incorporation of nitrogen in sputtered carbon films. 81:262-268. 1996
- On the origin of micro-cracking in zinc-coated press hardened steels 2022