### publication venue for

- The Meshless Dynamic Relaxation Technique for Simulating Atomic Structures of Materials. 441:15-26. 2002
- A new penalty stiffness treatment for master-slave contact surfaces. 417:43-49. 2000
- A study of flow induced vibration failures in a large heat exchanger. 420:1-16. 2000
- Modified damping using projection methods for explicit transient problems. 417:145-151. 2000
- The effect of platen fins on the flow-induced vibrations of an in-line tube array. 420:95-100. 2000
- An experimental study of the effect of tube-to-tube ties on fluidelastic instability in an in-line tube array. 389:43-48. 1999
- Transverse natural frequencies and flow-induced vibrations of double bellows expansion joints. 389:315-322. 1999
- Explicit finite element formulation for a general strip yield model. 370:189-195. 1998
- The effect of discretization and boundary conditions on the convergence rate of the dynamic relaxation method. 354:105-110. 1997
- A hybrid explicit solution technique for quasi-static transients. 326:151-157. 1996
- A self-induced stress model for simulating hydride formation at flaws. 326:137-142. 1996
- Added fluid mass for bellows expansion joints in bending vibrations. 328:485-490. 1996
- Damping and fluidelastic instability of a tube array in two-phase R-11 cross-flow. 328:89-99. 1996
- Modelling of hydride cracking. 326:181-188. 1996
- Sound generation by a centrifugal pump at blade passing frequency. 328:455-463. 1996
- Analysis of Test Method to Extract Material Properties From Candu Fuel Channel Spacers Made of Helical Springs 2021
- Numerical Prediction of the Phase Difference in Tube Bundles Experiencing Streamwise Fluidelastic Instability 2021
- Torsional Fatigue Test Applicable to Helical Spring Material Used in Candu Fuel Channel Spacers 2021
- Elastic-Plastic Analogy for Examination of Softening Response for Strip Yield Models 2020
- Influence of Elastic-Plastic Bending on the Relationship Between Applied Load and Maximum Bending Stress for Straight and Curved Bars 2020
- Pitch and Pattern Effects on Streamwise Fluidelastic Instability in Tube Arrays 2019
- Blast Resilient Design of Infrastructure Subjected to Ground Threats 2017
- Resilience of Masonry Systems in Nuclear Power Plants Under Blast Risk 2017
- The Effects of Tube Array Geometry on Fluidelastic Instability in Heat Exchanger Tube Arrays in Cross Flow 2017
- Analysis of tension and bending response to characterize elastic-plastic material behavior 2017
- Comparison of strip yield and net Section plasticity models for a bar in bending with a single Edge crack 2017
- DYNAMIC CYCLIC STRESS ANALYSIS OF ROLLING OF A DIAMETRICALLY LOADED HELICAL TEST SPECIMEN 2017
- An Experimental Study of Steam Generator Tube Loading During Blowdown 2015
- Modelling of Streamwise and Transverse Fluidelastic Instability in Tube Arrays 2015
- Application of Transfer Matrix Method to Dynamic Analysis of Pipes With FSI 2014
- Crack Growth Prediction and Leakage Potential of Steam Generator Tubes Subjected to Flow Induced Vibrations 2014
- Instrumentation Development and Validation for an Experimental Study of Steam Generator Tube Loading During Blowdown 2014
- The Effect of Flat Bar Supports on Streamwise Fluidelastic Instability in Heat Exchanger Tube Arrays 2014
- Vibration Analysis of Curved Pipes Conveying Fluid 2014
- Welding Distortion Can be Mitigated if Welding Current and Traveling Speed Vary Optimized Along a Weld Path 2014
- Commissioning Tests for an Experimental Study of Steam Generator Tube Loading During Blowdown 2013
- Constructing a Validated Deformation Mechanism Map Using Low Temperature Creep Strain Accommodation Processes for Waspaloy (A Nickel-Based Superalloy) 2013
- Probabilistic Evaluation of the Integrity of Steam Generator Tubes Subjected to Flow Induced Vibrations 2013
- Blast Analysis, Design and Research: A Canadian Perspective 2012
- Constructing a Validated Deformation Mechanisms Map Using Low Temperature Creep Strain Accommodation Processes for Nickel-Base Alloy 718 2012
- Implications of Revised Seismic Spectra for Eastern North America on Response of Nonstructural Components and Piping 2012
- Non-Local Damage Model to Predict the Effect of Pre-Strain on Ductile Fracture in Aluminum Alloy 5052 2012
- An Experimental Study of the Phase Lag Causing Fluidelastic Instability in Tube Bundles 2011
- Effect of Hydrogen Concentration on the Threshold Stress Intensity Factor for Delayed Hydride Cracking in Zr-2.5Nb Pressure Tubes 2011
- Mechanical Behaviour of Alloy 800 Steam Generator Tube With a Circumferential Crack-Like Throughwall Flaw 2011
- Modeling of In-Situ Hydride Growth in Zr-2.5%Nb 2011
- American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP: Foreword 2010
- Second Order Errors Related to Geometric Nonlinearity in Explicit Central Difference Operator 2008
- Anatomy of the Calandria Tube Rolled Joint 2007
- On Damping and Fluidelastic Instability in a Tube Bundle Subjected to Two-Phase Cross-Flow 2007
- The Effect of Fins on Fluidelastic Instability in In-Line and Rotated Square Arrays 2007
- 6th symposium on fluid-structure interactions, aeroelasticity and flow-induced vibration & noise (6th FSI, AE & FIIV+N symposium) 2006
- Computer technology: Introduction 2006
- Damping measurements in tube bundles subjected to two-phase cross flow 2006
- Damping Measurements in Tube Bundles Subjected to Two-Phase Cross Flow 2006
- Dynamic Relaxation and New Periodic Symmetry Technique for Simulating Interactions Between Dislocations 2006
- Effect of Creep Relaxation on the Delayed Hydride Cracking Behavior of Irradiated Zirconium 2.5%Wt Niobium Pressure Tube Material 2006
- Elastic-Plastic Limit Analysis for Perforated Plates With Triangular Array of Circular Holes 2006
- Failure Behaviour of Notched Sheet Specimen Under Plane Strain Deformation 2006
- Fracture Behavior of Finite Length Part Through Wall Flaws in Zirconium-Niobium Pressure Tubes 2006
- Non-Uniform Pressure Distribution in Draw-Bend Friction Test and a New Methodology to Determine Non-Constant Friction Coefficient From the Test 2006
- Overview of Computational Methods for Hydrogen Diffusion Coupled With Stress and Temperature Gradients in Zirconium Reactor Components 2006
- Prediction of Forming Limit Diagrams for Aluminum Alloy Sheet Using Finite Element Analysis 2006
- A Finite Element Study on Contact Pressure Distribution in Draw-Bend Friction Test and Its Effect on Friction Measurement 2005
- Dynamic Relaxation and New Periodic Symmetry Techniques for Simulating Atomistic Dislocation Models Subjected to Two-Dimensional External Forces 2005
- Improving the Reliability of Tube Hydroforming Process by the Taguchi Method 2005
- Numerical Simulation of Sample Scale Intense Shear Bands in Uniaxial Tension Test of Aluminum Alloys 2005
- Plastic Limit Analysis of Perforated Material Under Finite Deformation 2005
- Two-Phase Flow-Induced Vibration of Parallel Triangular Tube Arrays With Asymmetric Support Stiffness 2005
- Influence of Yield Criteria on the Prediction of Shear Localization Considering the Inhomogeneous Distribution of Microstructure 2004
- Meshless Dynamic Relaxation Technique for Simulating Atomistic Models Subjected to External Forces Under the Periodic Symmetry 2004
- Prediction of Trimming Process Parameters in Aluminum Sheet Materials Using FE Method 2004
- Reliability Analysis of the Tube Hydroforming Process Using Fuzzy Sets Theory 2004
- Simulation of Buckling Instability of a Large Deformation Twisting Operation 2004
- A Finite Element Study of Friction Effect in Four-Point Bending Creep Test 2003
- A New Tube/Support Impact Model for Heat Exchanger Tubes in Loose Supports 2003
- Fluidelastic Instability in a Tube Array Subjected to Uniform Flow and Jet Flow 2003
- Generalized Application of Periodic Symmetry in Molecular Simulations 2003
- Periodic Symmetry for Explicit Methods for Large Deformation Twisting and Stretching 2003
- Reliability Analysis of the Tube Hydroforming Process Based on Forming Limit Diagram 2003
- Subcycled Hourglass Control for Explicit Time Integration of Dynamic Relaxation Equations 2002
- American Society of Machanical Engineers, Pressure Vessels and Piping Division (Publication) PVP: Foreword 2001
- American Society of Machanical Engineers, Pressure Vessels and Piping Division (Publication) PVP: Introduction 2001
- Cross flow, heat exchangers 2001
- Subcycled hourglass control for explicit time integration of finite elements 2000
- Entrance port rounding effects on acoustic resonance in safety relief valves 1999
- Lumped mass tensor formulation for dynamic relaxation 1999
- Efficient unified hourglass stabilization for one point quadrature three dimensional shell elements 1995
- Fluidelastic instability in a tube array subjected to two phase R-11 cross flow 1995
- Prediction of residual stress by simulation of the rolled joint manufacturing process for steam generators 1995
- Vortex shedding in normal triangular tube arrays 1994
- Three dimensional hourglass stabilization for one point quadrature finite elements 1993
- Natural vibrations of fluid filled bellows 1992
- Theoretical study of fluidelastic instability in a flexible array of tubes 1992
- Theoretical study of open lane effects on fluidelastic instability in tube arrays 1992
- Advances in dynamic relaxation techniques for non-linear finite element analysis 1992
- Computation of residual stress distribution in tubes due to a rolled joint forming process 1992
- Damping in small scale experimental models 1990
- Flow visualization study of the active control of free shear layer oscillations 1990
- Fluidelastic instability in multispan heat exchanger tube arrays 1990
- Multiply supported secondary systems 1990
- Experimental study of fluidelastic instability in a 3 span tube array 1989
- PARTIAL ADMISSION EFFECTS ON THE STABILITY OF A HEAT EXCHANGER TUBE ARRAY. 1987
- STROUHAL NUMBERS FOR HEAT EXCHANGER TUBE ARRAYS IN CROSS FLOW. 1986