### publication venue for

- Ammonia Direct Reduction of Iron Oxides — Preliminary Assessment 2024
- Characterization of Hydrogen DRI Samples From ZESTY Process 2024
- Evaluation of Combined DC/AC Inductive Heating of Steel Billet 2024
- Hydrogen Flame Behavior in High Temperature Steelmaking Environment 2024
- Hydrogen-Based Direct Reduction of Industrial Hematite Pellets: Chemical Composition and Microstructural Evolution 2024
- Improving Acoustic-Based Slag Foam Control Systems in the BOF 2024
- The Design of Sound Cavities for Microphone Sensors in Steelmaking 2024
- Variation of Ladle Eye Size Using Image Analysis 2024
- Bubble Size Determination in a Half-Scale Curved Water Model Mold for Various Casting Conditions Using Imaging and Machine Learning 2023
- Heat Transfer in a BOF Converter 2023
- Physical and Mathematical Modelling of Residence Time Distribution in a Twin-Strand Slab Caster Tundish 2023
- Detection of Stirring at Low Flowrates Using Acoustic Sensors 2022
- Porosity in Iron Ore Sintering 2022
- Potential for Increased Scrap Melting in a BOF 2022
- Analysis of Heat Loss in Oxygen Steelmaking 2021
- Effect of Inclusions on the Magnetic Properties of High-Grade Cold-Rolled Non-Oriented Silicon Steel 2019
- Lime-Magnetite Pellets (LMPs) for Ironmaking 2019
- Reheat Furnace Efficiency at Laverton Rod Mill 2019
- Use of Sound Signals in Analyzing Flow Behavior in Steel Vessels 2019
- A 3D meso-scale solidification model for steels 2018
- Alternative processing routes for magnetite ores 2018
- Dynamic modeling of BOF process: Comparison of model performance with plant data 2018
- Gas-based direct reduction of manganese ore pellets 2018
- The behavior of manganese in oxygen steelmaking 2018
- Transformation of spinel inclusions by calcium treatment in the ladle metallurgy furnace 2018
- Dynamic modeling of oxygen steelmaking process: A multi-zone kinetic approach 2017
- Industrial experience for nitrogen control in the production of interstitial-free (IF) steel 2017
- Investigation on lining erosion and stave damage of large blast furnaces at WISCO 2017
- Production aspects of a large blast furnace 2017
- Splash generation in oxygen steelmaking: What is known? 2017
- Vibration analysis of ladle gas stirring using cold model and plant data 2017
- A Parametric Study of Auxiliary Air Knives for the Purpose of Noise Reduction 2016
- Advanced coke quality characterization and cokemaking techniques based on in-depth understanding of coke behavior inside blast furnace: A review 2016
- Analysis of desiliconization reaction kinetics in a BOF 2016
- Bloated Droplet Theory: A New Approach to Understanding Oxygen Steelmaking 2016
- Effect of starting microstructure and intercritical annealing parameters on the microstructure and mechanical properties of a medium-mn third-generation advanced high-strength steel 2016
- Force balance in an operating blast furnace 2016
- Improved refining slags by addition of iron ore during converter steelmaking 2016
- Measuring Wall Shear Stress under an Air Knife Model using Oil Film Interferometry 2016
- Numerical Simulation of Single- and Multiple-Slot Air-Knives for Estimation of Final Coating Thickness in the Hot-Dip Galvanizing Process 2016
- Principal component analysis of vibration signal in ladle metallurgy 2016
- Transformation of alumina inclusions by calcium treatment in the ladle metallurgy furnace 2016
- CFD analysis of oxygen steelmaking kinetics and slag foaming using IMPHOS pilot plant data 2015
- Reaction characteristics of carbothermic reduction with tall pellets bed 2015
- Transient behavior of dephosphorization kinetics in oxygen steelmaking 2015
- Near-roll dross particle interactions in a galvanizing bath 2014
- Simulations of slag-metal entrainment in ladle metallurgy 2014
- Analysis of Splash Data From Oxygen Steelmaking 2013
- Inclusion Control Model in the Ladle Metallurgy Furnace 2013
- Model Studies on Slag Metal Entrainment in Gas-Stirred Ladles 2013
- NOx Sources and Production in a Consteel Electric Arc Furnace 2013
- Model for the carbothermic reduction of dust-carbon composite agglomerates 2012
- A model for slag eyes in steel refining ladles covered with thick slag 2011
- An analysis of circulation and mixing phenomena in gas-stirred ladles 2011
- Experimental study on splashing phenomenon in Electric Arc Furnace steelmaking 2011
- Intrinsic periodic changes in operating conditions in blast furnace 2011
- The steering of a drifting blast furnace 2011
- Development of comprehensive model for oxygen steelmaking 2010
- Effect of preheating temperature on the melting and decarburization behavior of DRI in steelmaking slag 2010
- Numerical investigation of air knives with multiple-impinging slot jets in continuous hot-dip galvanizing 2010
- Numerical modeling of scrap heating by burners 2010
- The McMaster Steel Research Centre, a model for industry-university collaboration 2010
- Experimental and mathematical studies of impinging gas jets on liquid surfaces 2009
- Some considerations in process design for better ladle metallurgy practice 2009
- The behavior of non-metallic inclusions during ladle refining 2009
- Monitoring ladle eye dynamics using multivariate statistical methods 2007
- Spout and eye formation on the bath surface in ladle metallurgy practice 2007
- The control of blast furnace operations through Tuyere practice based on RAFT or HTR 2007
- 3D mathematical modeling of flows in the deadman/hearth region of a blast furnace 2006
- Blast furnace performance and tuyere practice at Stelco Hamilton No. 5 blast furnace 2006
- Mathematical modeling of the deadman/hearth region by heat and mass balances field application BF No. 2 - Siderar S.A. 2006
- Modeling of gas flow and burner heating in an electric arc furnace 2006
- On the causes of hearth problems 2006
- Physical modelling of 3D flow in the blast furnace hearth 2006
- Air knife coating weight models 2005
- Developments in electric arc furnace steelmaking 2005
- Hearth modeling based on heat and mass balance relations 2005
- Mathematical modeling of flows in the coke-free layer of a blast furnace hearth 2005
- Optimization as a tool for process improvement in EAF operations 2005
- Physical modelling of flows in the blast furnace hearth 2005
- The theoretical basis of mathematical modeling of deadman/hearth region for monitoring and control 2005
- Chemical reactions in the blast furnace as it happens 2004
- Fundamentals and practicality of the development of a new and better ironmaking process 2004
- Radiation modeling in an EAF 2004
- Simulation of steel scrap movement 2004
- Kinetics of dephosphorisation and the interfacial oxygen potential for bloated metal droplets during oxygen steelmaking. 2:2148-2155. 2015
- Carbon injection rate for optimum electric arc furnace slags foaming. 849-856. 2011
- Mechanism of enhanced Cr 2O 3 reduction by liquid Fe-C in steelmaking slags. 1267-1276. 2011
- A study on supersonic coherent jet characteristics using computational fluid dynamics. 885-894. 2010
- On-line monitoring of the ladle stirring. 1221-1230. 2010
- Effect of steel substrate roughness on GA and GI coating roughness during the gas-jet wiping process. 2:259-267. 2009
- Kinetics of Carbon Reaction with Electric Arc Furnace Slags during Slag Foaming. vil. 1:617-626. 2009
- Nitrogen removal from steel by DRI fines injection. 1:403-412. 2005
- Phase-field modeling of steel scrap melting in a liquid steel bath. 1:833-843. 2004