publication venue for
- Improved pressure‐sensitive adhesive performance using carboxylated cellulose nanocrystals via blending. 64:798-816. 2024
- Understanding environmental stress cracking in the Bell Test at the notch region. 64:264-278. 2024
- Improving the consistency of environmental stress cracking resistance testing for polyethylenes. 63:478-488. 2023
- Additives to prevent the formation of surface defects during poly(vinyl chloride) calendering. 61:1209-1219. 2021
- Microstructure and orientation evolution of microinjection molded β‐nucleated isotactic polypropylene/poly(ethylene terephthalate) blends. 61:971-982. 2021
- Properties of microinjection‐molded polypropylene/graphite composites. 59:1560-1569. 2019
- Improved part strength for the fused deposition 3D printing technique by chemical modification of polylactic acid. 59:E59-E64. 2019
- Inline rheological behavior of dispersed water in a polyester matrix with a twin screw extruder. 58:775-783. 2018
- Microinjection molding of polypropylene/multi‐walled carbon nanotube nanocomposites: The influence of process parameters. 58:E226-E234. 2018
- Wrinkling in polymer film‐polymer substrate systems and a technique to minimize these surface distortions. 57:31-43. 2017
- Factors Affecting Gloss and Color of Decorative Pressure Sensitive Adhesive Films During Thermomechanical Deformation. 56:1357-1365. 2016
- Electrical and morphological properties of microinjection molded polystyrene/multiwalled carbon nanotubes nanocomposites. 56:1182-1190. 2016
- Experimental and numerical studies on bubble dynamics in nonpressurized foaming systems. 54:1947-1959. 2014
- Bubble nucleation in nonpressurized polymer foaming systems. 54:1201-1210. 2014
- Supercritical CO2 as an exfoliating aid for nanocomposite preparation: Comparison of different processing methodologies. 52:2049-2062. 2012
- Morphology development in the gate region of microinjection‐molded thermoplastics. 52:787-794. 2012
- Effect of long chain branching on nonisothermal crystallization behavior of polyethylenes synthesized with constrained geometry catalyst. 52:21-34. 2012
- Orientation development in solid‐state extrusion and hot forming of polypropylene tubes. 51:1446-1454. 2011
- Characterization of the microinjection molding process. 50:1214-1225. 2010
- Higher‐molecular‐weight hyperbranched polyethylenes containing crosslinking structures as lubricant viscosity‐index improvers. 50:911-918. 2010
- Axial‐feed thermoforming of oriented polypropylene tubes. 49:514-522. 2009
- Diffusion‐controlled atom transfer radical polymerization with crosslinking. 48:1254-1260. 2008
- Improved through‐plane electrical conductivity in a carbon‐filled thermoplastic via foaming. 48:687-696. 2008
- Discrete particle simulations of solids compaction and conveying in a single‐screw extruder. 48:62-73. 2008
- Rheology studies of foam flow during injection mold filling. 47:522-529. 2007
- Surface tearing and wall slip phenomena in extrusion of highly filled HDPE/wood flour composites. 46:1204-1214. 2006
- Kinetic studies of cationic photopolymerizations of cycloaliphatic epoxide, triethyleneglycol methyl vinyl ether, and cyclohexene oxide. 45:1546-1555. 2005
- Rheology studies of polyethylene/chemical blowing agent solutions within an injection molding machine. 45:1108-1118. 2005
- Branching and gelation in atom transfer radical polymerization of methyl methacrylate and ethylene glycol dimethacrylate. 45:720-727. 2005
- Fast and efficient simulation of 3D creeping flow in ducts using a space-marching algorithm. 45:249-259. 2005
- Investigation of solids transport in a single‐screw extruder using a 3‐D discrete particle simulation. 44:2203-2215. 2004
- Experiments and flow analysis of a micropelletizing die. 44:1391-1402. 2004
- Study of particle trajectories, residence times and flow behavior in kneading discs of intermeshing co‐rotating twin‐screw extruders. 44:779-793. 2004
- Numerical simulation of film casting using an updated lagrangian finite element algorithm. 43:1105-1122. 2003
- Ethylene copolymers as sintering enhancers and impact modifiers for rotational molding of polyethylene. 42:1359-1369. 2002
- Processing enhancers for rotational molding of polyethylene. 41:1731-1742. 2001
- Melting and densification of thermoplastic powders. 41:155-169. 2001
- Melting mechanism of a starved‐fed single‐screw extruder for calcium carbonate filled polyethylene. 40:2014-2026. 2000
- Nonisothermal two‐dimensional film casting of a viscous polymer. 40:1870-1877. 2000
- The effects of dual‐orifice air‐ring design on blown film cooling. 40:1611-1618. 2000
- Experimental validation of numerical simulations of the kneading disc section in a twin screw extruder. 40:892-901. 2000
- Numerical simulation of pressure and velocity profiles in kneading elements of a co‐rotating twin screw extruder. 40:525-541. 2000
- Bubble dissolution in molten polymers and its role in rotational molding. 39:1189-1198. 1999
- Functionalization of ethylene‐propylene‐diene terpolymer via the alder ene reaction. 38:1694-1707. 1998
- An experimental study and model assessment of polymer sintering. 36:2198-2207. 1996
- Melting behavior and thermal properties of high density polythylene. 35:151-156. 1995
- Free radical degradation of polypropylene: Random chain scission. 33:445-454. 1993
- Computer simulation of thermoforming in complex shapes. 32:699-704. 1992
- An assessment of cogswell's method for measurement of extensional viscosity. 31:1015-1021. 1991
- Novel photoresist design based on electrophilic aromatic substitution. 29:960-964. 1989
- Effect of die wall cooling or heating on extrudate swell. 29:685-689. 1989
- Effect of molecular weight distribution on the rheological and mechanical properties of polypropylene. 29:390-396. 1989
- Interface determination in bicomponent extrusion. 28:982-988. 1988
- Production of controlled‐rheology polypropylene resins by peroxide promoted degradation during extrusion. 28:170-180. 1988
- Finite element simulation of fountain flow in injection molding. 26:449-454. 1986
- A numerical study of the effect of normal stresses and elongational viscosity on entry vortex growth and extrudate swell. 25:677-689. 1985
- Calendering analysis without the lubrication approximation. 25:6-18. 1985
- General discussion on the role of computer aided engineering. 24:716-721. 1984
- Numerical simulation of entry and exit flows in slit dies. 24:707-715. 1984
- Numerical simulation of a single‐screw plasticating extruder. 22:1084-1094. 1982
- On the dynamics and control of a plasticating extruder. 22:1095-1106. 1982
- A critical review of dynamic modeling and control of plasticating extruders. 22:393-401. 1982
- Calendering poly(vinyl chloride): Theory and experiments. 20:725-731. 1980
- A study of viscous dissipation in the calendering of power‐law fluids. 18:210-214. 1978
- Finite element analysis of calendering. 16:712-719. 1976
- Critcal stress and recoverable shear for polymer melt fracture. 12:184-192. 1972
- Melt fracture of polystyrene. 11:1-5. 1971