Journal of Structural Engineering
Journal
-
- Overview
-
- Identity
-
- View All
-
Overview
publication venue for
-
Experimental and Numerical Studies on Thick Rubber Bearings under Uniaxial and Offset Tensile Loading.
150.
2024
-
Strategies to Reduce and Quantify Seismic Damage in Controlled Rocking Masonry Walls.
150.
2024
-
Shake Table Testing and Modeling of New Zealand Light-Frame Wood Buildings.
149.
2023
-
Sliding versus Rubber Bearings: Exploring the Difference in Collapse Probability.
149.
2023
-
Analysis of Reinforced Concrete Shear Walls with Different End Configurations for Seismic Design.
149.
2023
-
Development of Controlled Rocking Masonry Walls with Energy Dissipation Accessible in a Steel Base.
149.
2023
-
Fragility and Economic Evaluations of High-Strength Reinforced Concrete Shear Walls in Nuclear Power Plants.
149.
2023
-
Experimental Assessment of Resilient Controlled Rocking Masonry Walls with Replaceable Energy Dissipation.
149.
2023
-
Finite-Element Modeling for Seismic Damage Estimation of Suspended Ceiling Systems.
149.
2023
-
Seismic Collapse Risk Assessment of Low-Aspect-Ratio Reinforced Concrete Shear Walls Using the FEMA P695 Methodology.
149.
2023
-
Effect of Manufacturing Imperfections on the Service-Level Performance of Elastomeric Bridge Bearings.
148.
2022
-
Seismic Design and Performance Evaluation of Controlled Rocking Masonry Shear Walls without Posttensioning.
148.
2022
-
Experimental Assessment of Controlled Rocking Masonry Shear Walls without Post-tensioning.
148.
2022
-
Nondestructive Assessment of Elastomeric Bridge Bearings Using 3D Digital Image Correlation.
148.
2022
-
Data Analytics in Structural Engineering.
147.
2021
-
Numerical Investigation of High-Strength Steel and Ultrahigh-Performance Concrete for Ductile Rectangular Hollow Columns.
147.
2021
-
Stiffness of Rubber Bearings Considering Nonstandard Top and Bottom Boundary Conditions.
147.
2021
-
Experimental and Analytical Studies on the Horizontal Behavior of Elastomeric Bearings under Support Rotation.
147.
2021
-
Incorporating Frame Action into Seismic Design of Gusset Plates.
147.
2021
-
Experimental Investigation of a Concentrically Braced Frame with Replaceable Brace Modules.
146.
2020
-
Mechanics-Guided Genetic Programming Expression for Shear-Strength Prediction of Squat Reinforced Concrete Walls with Boundary Elements.
146.
2020
-
Mechanics-Guided Genetic Programming Expression for Shear-Strength Prediction of Squat Reinforced Concrete Walls with Boundary Elements.
146.
2020
-
Influence of Steel Reinforcement on the Performance of Elastomeric Bearings.
146.
2020
-
Rocking Response of Unanchored Building Contents Considering Horizontal and Vertical Excitation.
146.
2020
-
Seismic Demand on Acceleration-Sensitive Nonstructural Components in Viscously Damped Braced Frames.
146.
2020
-
Integrated Structural–Nonstructural Performance-Based Seismic Design and Retrofit Optimization of Buildings.
146.
2020
-
Large-Scale Experimental Testing and Numerical Modeling of Floor-to-Frame Connections for Controlled Rocking Steel Braced Frames.
146.
2020
-
Metaresearching Structural Engineering Using Text Mining: Trend Identifications and Knowledge Gap Discoveries.
146.
2020
-
Seismic Collapse Risk Assessment of Posttensioned Controlled Rocking Masonry Walls.
146.
2020
-
Behavior of Seismically Detailed Reinforced Concrete Block Shear Walls with Boundary Elements under Out-of-Plane Loading.
146.
2020
-
Effect of Temperature on the Response of Unbonded Fiber-Reinforced Elastomeric Isolators.
145.
2019
-
Out-of-Plane Behavior of Load-Bearing Reinforced Masonry Shear Walls.
145.
2019
-
Out-of-Plane Performance of Reinforced Masonry Shear Walls Constructed with Boundary Elements.
145.
2019
-
Shake Table Seismic Performance Assessment of Auxiliary Battery Power Systems Using the FEMA 461 Protocol.
145.
2019
-
Experimental Testing of a Replaceable Brace Module for Seismically Designed Concentrically Braced Steel Frames.
145.
2019
-
Experimental Study on the Seismic Response of Equipment on Wheels and Casters in Base-Isolated Hospitals.
145.
2019
-
Effect of Design Methodology on Collapse of Friction Pendulum Isolated Moment-Resisting and Concentrically Braced Frames.
144.
2018
-
System-Level Seismic Damage Assessment Methodology for Reinforced Masonry Shear Wall Buildings.
144.
2018
-
Reinforced Masonry Building Seismic Response Models for ASCE/SEI-41.
144.
2018
-
Ultrahigh-Performance Concrete for Posttensioned Precast Bridge Piers for Seismic Resilience.
143.
2017
-
Peak Sliding Demands on Unanchored Equipment and Contents in Base-Isolated Buildings under Pulse Excitation.
143.
2017
-
Seismic Response of Reinforced-Concrete Masonry Shear-Wall Components and Systems: State of the Art.
143.
2017
-
System-Level Seismic Risk Assessment Methodology: Application to Reinforced Masonry Buildings with Boundary Elements.
143.
2017
-
Experimental Assessment of the System-Level Seismic Performance of an Asymmetrical Reinforced Concrete Block–Wall Building with Boundary Elements.
143.
2017
-
Experimental Investigation of Elastomeric Isolation Bearings with Flexible Supporting Columns.
143.
2017
-
Approach to Developing Design Charts for Quantifying the Influence of Blast Wave Clearing on Target Deformation.
143.
2017
-
Evaluation of ASCE 43-05 Seismic Design Criteria for Rocking Objects in Nuclear Facilities.
142.
2016
-
Seismic performance assessment of reinforced masonry walls with and without boundary elements using the FEMA P695 methodology.
142.
2016
-
Experimental Evaluation of the System-Level Seismic Performance and Robustness of an Asymmetrical Reinforced Concrete Block Building.
142.
2016
-
Influence of Floor Diaphragm–Wall Coupling on the System-Level Seismic Performance of an Asymmetrical Reinforced Concrete Block Building.
142.
2016
-
Buildings with Rigid Walls and Flexible Roof Diaphragms. I: Evaluation of Current U.S. Seismic Provisions.
142.
2016
-
Buildings with Rigid Walls and Flexible Roof Diaphragms. II: Evaluation of a New Seismic Design Approach Based on Distributed Diaphragm Yielding.
142.
2016
-
Distributed Yielding Concept for Improved Seismic Collapse Performance of Rigid Wall-Flexible Diaphragm Buildings.
142.
2016
-
Seismic Isolation of a Shear Wall Structure Using Rectangular Fiber-Reinforced Elastomeric Isolators.
142.
2016
-
Inference of Blast Wavefront Parameter Uncertainty for Probabilistic Risk Assessment.
141.
2015
-
Multiple Tuned Liquid Dampers for Efficient and Robust Structural Control.
141.
2015
-
System-Level Seismic Performance Assessment of an Asymmetrical Reinforced Concrete Block Shear Wall Building.
141.
2015
-
Response Evaluation of Reinforced Concrete Block Structural Walls Subjected to Blast Loading.
141.
2015
-
Strain Rate Effect on Development Length of Steel Reinforcement.
141.
2015
-
System-Level Displacement- and Performance-Based Seismic Design Parameter Quantifications for an Asymmetrical Reinforced Concrete Masonry Building.
141.
2015
-
Erratum for “Performance-Based Seismic Design of Controlled Rocking Steel Braced Frames. I: Methodological Framework and Design of Base Rocking Joint” by Lydell Wiebe and Constantin Christopoulos.
141.
2015
-
Erratum for “Performance-Based Seismic Design of Controlled Rocking Steel Braced Frames. II: Design of Capacity-Protected Elements” by Lydell Wiebe and Constantin Christopoulos.
141.
2015
-
Performance-Based Seismic Design of Controlled Rocking Steel Braced Frames. I: Methodological Framework and Design of Base Rocking Joint.
141.
2015
-
Performance-Based Seismic Design of Controlled Rocking Steel Braced Frames. II: Design of Capacity-Protected Elements.
141.
2015
-
Model of the Shear Behavior of Unbonded Fiber-Reinforced Elastomeric Isolators.
141.
2015
-
Seismic Response Analysis of a Reinforced Concrete Block Shear Wall Asymmetric Building.
141.
2015
-
Seismic Collapse Capacity–Based Evaluation and Design of Frame Buildings with Viscous Dampers Using Pushover Analysis.
141.
2015
-
Seismic Fragility Study of Fire Sprinkler Piping Systems with Grooved Fit Joints.
141.
2015
-
Seismic Fragility Evaluation of Lightly Reinforced Concrete-Block Shear Walls for Probabilistic Risk Assessment.
141.
2015
-
Bond of Reinforcement in Concrete Incorporating Recycled Concrete Aggregates.
141.
2015
-
Closure to “Bond of Reinforcement in Concrete Incorporating Recycled Concrete Aggregates” by Liam J. Butler, Jeffrey S. West, and Susan L. Tighe.
141.
2015
-
Shake Table Seismic Performance Assessment of Lightly Reinforced Concrete Block Shear Walls.
141.
2015
-
Seismic Design Parameters for Special Masonry Structural Walls Detailed with Confined Boundary Elements.
140.
2014
-
Seismic Response Analysis of Lightly Reinforced Concrete Block Masonry Shear Walls Based on Shake Table Tests.
140.
2014
-
Dynamic Response of Steel Columns Subjected to Blast Loading.
140.
2014
-
Large-Scale Seismic Testing of a Hybrid Sliding-Rocking Posttensioned Segmental Bridge System.
140.
2014
-
Seismic Performance Quantification of Reinforced Masonry Structural Walls with Boundary Elements.
140.
2014
-
Plastic Hinge Model and Displacement-Based Seismic Design Parameter Quantifications for Reinforced Concrete Block Structural Walls.
140.
2014
-
Time-Response Analysis of Arching Unreinforced Concrete Block Walls Subjected to Blast Loads.
140.
2014
-
Normal Strain-Adjusted Shear Strength Expression for Fully Grouted Reinforced Masonry Structural Walls.
140.
2014
-
Experimental Seismic Fragility of Cold-Formed Steel Framed Gypsum Partition Walls.
139:1285-1293.
2013
-
Seismic Performance Parameter Quantification of Shear-Critical Reinforced Concrete Masonry Squat Walls.
139:957-973.
2013
-
Force- and Displacement-Based Seismic Performance Parameters for Reinforced Masonry Structural Walls with Boundary Elements.
138:1477-1491.
2012
-
Response of Arching Unreinforced Concrete Masonry Walls to Blast Loading.
137:1205-1214.
2011
-
Characteristics of Rectangular, Flanged, and End-Confined Reinforced Concrete Masonry Shear Walls for Seismic Design.
136:1471-1482.
2010
-
Control of a Seismically Excited Benchmark Building Using Linear Matrix Inequality-Based Semiactive Nonlinear Fuzzy Control.
136:1023-1026.
2010
-
Alternative Strategies to Enhance the Seismic Performance of Reinforced Concrete-Block Shear Wall Systems.
136:676-689.
2010
-
Ultimate Wind Load Design Gust Wind Speeds in the United States for Use in ASCE-7.
136:613-625.
2010
-
Experimental Seismic Response of a Full-Scale Light-Frame Wood Building.
136:246-254.
2010
-
Horizontal Wind Loads on Open-Frame, Low-Rise Buildings.
136:98-105.
2010
-
Three-Dimensional Seismic Response of a Full-Scale Light-Frame Wood Building: Numerical Study.
136:56-65.
2010
-
Behavior of Fully Grouted Reinforced Concrete Masonry Shear Walls Failing in Flexure: Experimental Results.
134:1754-1767.
2008
-
Lateral Response Evaluation of Fiber-Reinforced Neoprene Seismic Isolators Utilized in an Unbonded Application.
134:1627-1637.
2008
-
Review of Displacement-Based Seismic Design of Structures by M. J. N. Priestley, G. M. Calvi, and M. J. KowalskyDisplacement-Based Seismic Design of StructuresIUSS Press.
134:1065-1065.
2008
-
Shear Capacity for Flange-Web Intersection of Concrete Block Shear Walls.
134:947-960.
2008
-
Effectiveness of a 2D TLD and Its Numerical Modeling.
133:251-263.
2007
-
Multilaminate Macromodel for Concrete Masonry: Formulation and Verification.
132:1984-1996.
2006
-
Validating Wind-Induced Response of Tall Buildings: Synopsis of the Chicago Full-Scale Monitoring Program.
132:1509-1523.
2006
-
Fatigue of Corrugated-Web Plate Girders: Analytical Study.
132:1381-1392.
2006
-
Fatigue of Corrugated-Web Plate Girders: Experimental Study.
132:1371-1380.
2006
-
Seismic Response of High Voltage Electrical Transformer–Bushing Systems.
132:287-295.
2006
-
Flexural Properties of Flexible Conductors Interconnecting Electrical Substation Equipment.
131:151-159.
2005
-
Seismic Analysis of Woodframe Structures. I: Model Formulation.
130:1353-1360.
2004
-
Seismic Analysis of Woodframe Structures. II: Model Implementation and Verification.
130:1361-1370.
2004
-
Seismic Retrofit of Concrete-Masonry-Infilled Steel Frames with Glass Fiber-Reinforced Polymer Laminates.
130:1343-1352.
2004
-
Seismic Response of Electrical Substation Equipment Interconnected by Flexible Conductors.
130:769-778.
2004
-
Seismic Response of Concentrically Braced Steel Frames Made with Rectangular Hollow Bracing Members.
129:1626-1636.
2003
-
Three-Strut Model for Concrete Masonry-Infilled Steel Frames.
129:177-185.
2003
-
Seismic Testing of Two-Story Woodframe House: Influence of Wall Finish Materials.
128:1337-1345.
2002
-
Posttensioned Energy Dissipating Connections for Moment-Resisting Steel Frames.
128:1111-1120.
2002
-
Performance-Based Seismic Design of Wood Framed Buildings.
128:39-47.
2002
-
Out-of-Plane Seismic Evaluation and Retrofit of Turn-of-the-Century North American Masonry Walls.
127:561-569.
2001
-
Cyclic Analysis of Wood Shear Walls.
127:433-441.
2001
-
Closure to “Simple Design Procedure for Liquid‐Filled Steel Conical Tanks” by A. A. El Damatty, R. M. Korol, and M. El Attar.
126:1373-1374.
2000
-
Simple Design Procedure for Liquid-Filled Steel Conical Tanks.
126:1372-1374.
2000
-
Seismic Interaction of Interconnected Electrical Substation Equipment.
126:1140-1149.
2000
-
Performance Evaluation of Friction Spring Seismic Damper.
126:491-499.
2000
-
Simple Design Procedure for Liquid-Filled Steel Conical Tanks.
125:879-890.
1999
-
Material Properties Models for Analysis of Cold-Formed Steel Members.
123:1135-1143.
1997
-
Upgrading of Nonductile Reinforced Concrete Frame Connections.
123:1001-1010.
1997
-
Stability of Imperfect Steel Conical Tanks under Hydrostatic Loading.
123:703-712.
1997
-
Analytical Model for Shear-Link Behavior.
121:1574-1580.
1995
-
Simplified Dynamic Analysis for Gravity Dams.
120:2697-2716.
1994
-
Blind Bolting W‐Shape Beams to HSS Columns.
119:3463-3481.
1993
-
Damage to Cable‐Stayed Bridge during 1988 Saguenay Earthquake. I: Pseudostatic Analysis.
119:1432-1449.
1993
-
Damage to Cable‐Stayed Bridge during 1988 Saguenay Earthquake. II: Dynamic Analysis.
119:1450-1463.
1993
-
Erratum: “Thin‐Walled Multicell Box‐Girder Finite Element” by A. Ghani Razaqpur and Hangang Li (October, 1991, Vol. 117, No. 10).
118:1724-1724.
1992
-
CORRECTION.
118:1448-1448.
1992
-
Closure to “Finite Strip Free-Vibration Analysis of Wood Floors” by A. Filiatrault, B. Folz, and R. O. Foschi (August, 1990, Vol. 116, No. 8) \textbar Request PDF.
118:1430-1431.
1992
-
Cyclic Behavior of Extended End‐Plate Joints.
118:1333-1353.
1992
-
Discussion of “
Finite Strip Free‐Vibration Analysis of Wood Floors
” by A. Filiatrault, B. Folz, and R. O. Foschi (August, 1990, Vol. 116, No. 8).
118:1428-1430.
1992
-
Erratum: “Thin‐Walled Multicell Box‐Girder Finite Element” by A. Ghani Razaqpur and Hangang Li (October, 1991, Vol. 117, No. 10).
118:1448-1449.
1992
-
Thin‐Walled Multicell Box‐Girder Finite Element.
117:2953-2971.
1991
-
Finite‐Strip Free‐Vibration Analysis of Wood Floors.
116:2127-2142.
1990
-
Analytical Modeling of Nonlinear Behavior of Composite Bridges.
116:1715-1733.
1990
-
Seismic Design Spectra for Friction‐Damped Structures.
116:1334-1355.
1990
-
Finite Element Model for RHS Double Chord K‐Joints.
115:1038-1053.
1989
-
Effect of Peak Ground
a/v
Ratio on Structural Damage.
114:1019-1037.
1988
-
Flexural Tensile Strength of Concrete Block Masonry.
114:50-66.
1988
-
Out‐of‐Plane Bending of Concrete Block Walls.
114:121-133.
1988
-
Double Chords as an Alternative in Tubular Trusses.
112:2665-2678.
1986
-
Tension Failure Criteria for Plain Concrete Masonry.
110:228-244.
1984
-
Double Chord RHS Trusses: Analytical Model.
109:2812-2828.
1983
-
Development of a Flexural Yielding Energy Dissipation Device for Controlled Rocking Systems
2023
has subject area
Identity
International Standard Serial Number (ISSN)
Electronic International Standard Serial Number (EISSN)