Journal of Applied Polymer Science
Journal
-
- Overview
-
- Identity
-
- View All
-
Overview
publication venue for
-
Fabrication of thin-film composite membranes with pendant, photoreactive diazoketone functionality
1997
-
Impact of functional groups on lithium salt dispersion and mobility in polymer electrolytes.
141.
2024
-
Application of Cyrene solvent for the fabrication of polymethyl methacrylate, polyethyl methacrylate and composite films containing hydroxyapatite and diamonds.
141.
2024
-
Design and optimization of superabsorbent hydrogels based on acrylic acid/2‐acrylamido‐2‐methylpropane sulfonic acid copolymers.
139.
2022
-
Simultaneous delivery of several antimicrobial drugs from multi‐compartment glycerol‐silicone membranes.
138.
2021
-
Microinjection molding of polyoxymethylene/multiwalled carbon nanotubes composites with different matrix viscosities.
138.
2021
-
Effect of poly(2‐ethyl‐2‐oxazoline) and UV irradiation on the melt rheology and mechanical properties of poly(lactic acid).
136.
2019
-
Electrical and morphological properties of microinjection molded polypropylene/carbon nanocomposites.
134.
2017
-
Biopolyamide hybrid composites for high performance applications.
133.
2016
-
Treatments of protein for biopolymer production in view of processability and physical properties: A review.
133.
2016
-
Potato protein isolate‐based biopolymers.
132.
2015
-
Hybrid biocomposites with enhanced thermal and mechanical properties for structural applications.
132.
2015
-
Hybrid biocomposites with enhanced thermal and mechanical properties for structural applications.
132.
2015
-
Fabrication of Tiron‐doped polypyrrole/MWCNT composite electrodes with high mass loading and enhanced performance for supercapacitors.
132.
2015
-
Electrical conductivity and percolation threshold of hybrid carbon/polymer composites.
132.
2015
-
Rapid prototyping of a miniaturized Electrospinning setup for the production of polymer nanofibers.
131.
2014
-
Nylon‐coated ultra high molecular weight polyethylene fabric for enhanced penetration resistance.
131.
2014
-
Characterization of extruded film based on thermoplastic potato flour.
125:3250-3258.
2012
-
In situ dynamic vulcanization process in preparation of electrically conductive PP/EPDM thermoplastic vulcanizate/expanded graphite nanocomposites: Effects of state of cure.
123:32-40.
2012
-
Modeling analysis of chain transfer in reversible addition‐fragmentation chain transfer polymerization.
122:497-508.
2011
-
Influence of chain microstructure on ethylene–norbornene copolymer film properties.
121:707-710.
2011
-
Influence of supercritical CO2 on the interactions between maleated polypropylene and alkyl‐ammonium organoclay.
119:2223-2234.
2011
-
Stability study of inverse suspension copolymerization of 1,1,3,3‐tetramethylguandium acrylate and N,N′‐methylenebisacrylamide.
118:1450-1454.
2010
-
The effect of ligand molecular weight on copper salt catalyzed oxidative coupling polymerization of 2,6‐dimethylphenol.
117:3473-3481.
2010
-
Influence of structural feature of aluminum coatings on mechanical and water barrier properties of metallized PET films.
115:3110-3119.
2010
-
Multiple percolation in a carbon‐filled polymer composites via foaming.
115:646-654.
2010
-
Development of novel tunable light scattering coating materials for fiber optic diffusers in photodynamic cancer therapy.
112:1516-1523.
2009
-
Nonfouling biomaterials based on polyethylene oxide‐containing amphiphilic triblock copolymers as surface modifying additives: Synthesis and characterization of copolymers and surface properties of copolymer–polyurethane blends.
108:1617-1628.
2008
-
Preparation of interfacially compatibilized PP‐EPDM thermoplastic vulcanizate/graphite nanocomposites: Effects of graphite microstructure upon morphology, electrical conductivity, and melt rheology.
107:3425-3433.
2008
-
Amine‐derivatized poly(diallyldimethylammonium chloride) from N‐vinylformamide copolymerization.
104:1068-1075.
2007
-
Determination of the relative importance of process factors on particle size distribution in suspension polymerization using a Bayesian experimental design technique.
102:5577-5586.
2006
-
Aspects of foaming a glass‐reinforced polypropylene with chemical blowing agents.
102:4696-4706.
2006
-
Mass transfer of dilute 1,2‐dimethoxyethane aqueous solutions during pervaporation process.
100:2075-2084.
2006
-
Differential scanning calorimetry of copolymer of isotactic polypropylene backbone with grafted poly(ethylene‐co‐propylene) branches.
99:3380-3388.
2006
-
Removal of 1,2‐dichloroethane from aqueous solutions with novel composite polydimethylsiloxane pervaporation membranes.
98:1477-1491.
2005
-
Synthesis of reactor blend of linear and branched polyethylene using metallocene/Ni‐diimine binary catalyst system in a single reactor.
96:2212-2217.
2005
-
Syndiospecific styrene polymerization with CpTiCl3/MAO: Effects of the order of reactant addition on polymerization and polymer properties.
94:1449-1455.
2004
-
Pervaporation of 1,2‐dimethoxyethane from aqueous solutions by crosslinked oligosilylstyrene–poly(dimethylsiloxane) composite membranes.
92:2284-2294.
2004
-
Rheological and thermomechanical properties of long‐chain‐branched polyethylene prepared by slurry polymerization with metallocene catalysts.
92:307-316.
2004
-
Synthesis and characterization of thiol‐terminated poly(ethylene oxide) for chemisorption to gold surface.
90:594-607.
2003
-
Electron spin resonance spectroscopy study on reduction of constrained‐geometry catalyst systems.
89:2474-2482.
2003
-
Acidic and basic hydrolysis of poly(N‐vinylformamide).
86:3412-3419.
2002
-
Durability of poly(dimethylsiloxane) when exposed to chlorine gas.
85:2458-2470.
2002
-
UV photopolymerization behavior of dimethacrylate oligomers with camphorquinone/amine initiator system.
82:1107-1117.
2001
-
Electron spin resonance study and reactive extrusion of polyacrylamide and polydiallyldimethylammonium chloride.
77:1154-1164.
2000
-
Grafting of polyelectrolytes onto polyacrylamide by reactive processing.
74:1412-1416.
1999
-
Alder Ene functionalization of polypropylene through reactive extrusion.
71:503-516.
1999
-
Improved accuracy and precision in the light-scattering characterization of homo- and copolymers in THF.
66:1303-1316.
1997
-
Improved accuracy and precision in the light‐scattering characterization of homo‐ and copolymers in THF.
66:1303-1316.
1997
-
Experimental study of emulsion polymerization with crosslinking.
66:935-957.
1997
-
Thermally conductive polymer composites for electronic packaging.
65:2733-2738.
1997
-
Comments on ?A new copolymerization equation? (C. Zhou and S. Lin, J. Appl. Polym. Sci., 55, 641-643, 1995).
60:2039-2040.
1996
-
Photochemically modified thin‐film composite membranes. II. Bromoethyl ester, dioxolan, and hydroxyethyl ester membranes.
54:1233-1242.
1994
-
Synthesis of nonionic flocculants by gamma irradiation of mixtures of polyacrylamide and poly(ethylene oxide).
54:805-813.
1994
-
Microstructure of polyurethane ionomers derivatized with dodecylamine and polyethylene oxide in the hard segment.
52:515-523.
1994
-
Bulk and suspension polymerization of styrene in the presence of n‐pentane. An evaluation of monofunctional and bifunctional initiation.
50:327-343.
1993
-
Photochemically modified thin‐film composite membranes. I. Acid and ester membranes.
48:187-198.
1993
-
Experimental investigation of vinyl chloride polymerization at high conversion—reactor dynamics.
43:1259-1269.
1991
-
Molecular weight characterization of poly(acrylamide‐co‐sodium acrylate). I. Viscometry.
42:2081-2093.
1991
-
Theoretical modification of the finely porous model for reverse osmosis transport.
42:1143-1154.
1991
-
Kinetic model for short‐cycle bulk styrene polymerization through bifunctional initiators.
42:629-641.
1991
-
Epoxy–amine oligmer production.
40:867-890.
1990
-
Experimental investigation of vinyl chloride polymerization at high conversion—conversion and tracer response relationships.
41:2327-2347.
1990
-
Measurements of residence time distribution for the peroxide degradation of polypropylene in a single‐screw plasticating extruder.
37:681-693.
1989
-
Effect of impurities on emulsion polymerization: Case I kinetics.
35:2023-2038.
1988
-
Effect of impurities on emulsion polymerization: Case II kinetics.
35:2009-2021.
1988
-
An investigation of the emulsion terpolymerization of 2-ethylhexylacrylate–vinyl acetate–acrylic acid.
35:1409-1420.
1988
-
Modeling reverse osmosis separations with strong solute‐membrane affinity at different temperatures using the finely porous model.
35:1129-1148.
1988
-
Novel thin‐film composite membranes containing photoreactive groups part I: Choosing the photoreactive group.
34:2713-2732.
1987
-
Experimental investigation of vinyl chloride polymerization at high conversion—temperature/pressure/conversion and monomer phase distribution relationships.
34:1749-1766.
1987
-
A mathematical model for the Ziegler‐Natta polymerization of butadiene.
34:829-845.
1987
-
Block copolymers of n‐propyl p‐styrene sulfonate with isoprene and styrene: Synthesis, characterization, and phase separation behavior.
30:2297-2313.
1985
-
Simulation of Vortex growth in planar entry flow of a viscoelastic fluid.
30:1379-1391.
1985
-
Influence of long chain branching on extrudate swell of low‐density polyethylenes.
28:2389-2392.
1983
-
Investigations on nylon 4 membranes: Synthesis and transport properties. II. Transport properties of nylon 4 polymer membranes.
26:1907-1918.
1981
-
Investigations on nylon 4 membranes. Synthesis and transport properties. I. Synthesis of nylon 4 polymer.
26:1135-1142.
1981
-
Heat transfer to molten polymer flow in tubes.
26:765-773.
1981
-
Investigations on nylon 4 membranes. Synthesis and transport properties. I. Synthesis of nylon 4 polymer.
26:1135-1142.
1981
-
Investigations on nylon 4 membranes: Synthesis and transport properties. II. Transport properties of nylon 4 polymer membranes.
26:1907-1918.
1981
-
Ionically crosslinked poly(acrylic acid) membranes. III. Reverse osmosis results for dry cast membranes.
24:1341-1351.
1979
-
Bulk polymerization of acrylonitrile. II. Model development.
23:1413-1429.
1979
-
Continuous emulsion polymerization. Modeling oscillations in vinyl acetate polymerization.
23:401-418.
1979
-
Influence of processing parameters and molecular weight on the mechanical properties of PVC.
21:3345-3354.
1977
-
A comparison of melt fracture initiation conditions in capillaries and slits.
21:1177-1187.
1977
-
Some transport characteristics of aromatic polyamide membranes in reverse osmosis.
20:1491-1499.
1976
-
Reverse osmosis separations of aldehydes, ketones, and ethers in aqueous solutions using porous cellulose acetate membranes.
19:2473-2484.
1975
-
Reverse osmosis separations of some organic and inorganic solutes in aqueous solutions using aromatic polyamide membranes.
19:801-819.
1975
-
Reverse osmosis separations for some alcohols and phenols in aqueous solutions using aromatic polyamide membranes.
18:3671-3684.
1974
-
Polar and steric effects in reverse osmosis.
18:2829-2846.
1974
has subject area
Identity
International Standard Serial Number (ISSN)
Electronic International Standard Serial Number (EISSN)