selected scholarly activity
-
chapters
- Corrosion of Extruded Mg Alloys: Effect of Major Alloying Elements. 561-565. 2025
- Electrochemical Properties of Zn-Based Coatings on Direct Press Hardened Steels. 439-442. 2025
- Corrosion Susceptibility of a Mg Alloy ZAME1100 Thin-Wall Extruded Hollow-Beam Profile. 367-370. 2023
- Corrosion Behaviour of Friction Stir Welded AZ31 Joints for Automotive Applications. Magnesium Technology. 357–362-357–362. 2014
- Effect of Surface Condition on the Localized Corrosion Behavior of Magnesium Alloy AZ31B. Magnesium Technology. 335–340-335–340. 2014
- Corrosion Behaviour of Friction Stir Welded AZ31 Joints for Automotive Applications. 357-362. 2014
- Effect of Surface Condition on the Localized Corrosion Behavior of Magnesium Alloy AZ31B. 335-340. 2014
- Effect of Corrosion on the Tensile Properties of Friction‐Stir Welded AZ31B Sheet. 403-408. 2012
- Effect of Corrosion on the Tensile Properties of Friction-Stir Welded AZ31B Sheet. 403-408. 2012
- Effect of some Microstructural Parameters on the Corrosion Resistance of Magnesium Alloys. 271-276. 2012
- THE JOINING OF REACTION-BONDED SILICON CARBIDE TO INCONEL 600 USING REFRACTORY METAL INTERLAYERS. 169-177. 1989
- The joining of niobium to reaction bonded silicon carbide. 293-301. 1989
-
conferences
- Development of a High-Mn-Containing PHS for Liquid Metal Embrittlement Resistance. International Symposium on New Developments in Advanced High Strength Sheet Steels. 298-307. 2023
- Modeling the Work Hardening Behavior of High-Manganese Steels. Journal of Materials Engineering and Performance. 1591-1600. 2019
- Effect of Annealing Temperature on the Selective Oxidation and Reactive Wetting of a 0.1C-6Mn-2Si Advanced High Strength Steel During Continuous Galvanizing Heat Treatments. ISIJ International. 1635-1643. 2018
- EFFECT OF STARTING MICROSTRUCTURE AND INTERCRITICAL ANNEALING PARAMETERS ON THE MECHANICAL PROPERTY DEVELOPMENT OF A MEDIUM-MN THIRD-GENERATION ADVANCED HIGH STRENGTH STEEL. International Symposium on New Developments in Advanced High Strength Sheet Steels. 171-179. 2017
- Effect of Zn content on the corrosion properties of hot dip zinc galvanized coatings on press hardened steels. Eurocorr 2017 the Annual Congress of the European Federation of Corrosion 20th International Corrosion Congress and Process Safety Congress 2017. 2017
- A Parametric Study of Auxiliary Air Knives for the Purpose of Noise Reduction. AISTech - Iron and Steel Technology Conference Proceedings. 2075-2081. 2016
- Effect of starting microstructure and intercritical annealing parameters on the microstructure and mechanical properties of a medium-mn third-generation advanced high-strength steel. AISTech - Iron and Steel Technology Conference Proceedings. 2641-2649. 2016
- Measuring Wall Shear Stress under an Air Knife Model using Oil Film Interferometry. AISTech - Iron and Steel Technology Conference Proceedings. 2035-2041. 2016
- Numerical Simulation of Single- and Multiple-Slot Air-Knives for Estimation of Final Coating Thickness in the Hot-Dip Galvanizing Process. AISTech - Iron and Steel Technology Conference Proceedings. 2055-2066. 2016
- Comparative Corrosion Assessment of Coated Alloys for Multi-Material Lightweight Vehicle Architectures. SAE Technical Papers. 2015
- Characterization of a New Air Knife Design for the McMaster University Galvanizing Simulator. 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet Galvatech 2015. 697-701. 2015
- Continuous Hot-Dip Galvanizing of a Third Generation (3G) Advanced Steel. 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet Galvatech 2015. 182-189. 2015
- Effect of Galvanizing Heat Treatment on the Microstructure and Mechanical Properties of a 6Mn-1.5Si Third Generation Advanced High Strength Steel. 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet Galvatech 2015. 936-943. 2015
- Influence of Gas Atmosphere Oxygen Partial Pressure on the Selective Oxidation during Intercritical Annealing of a 6Mn-2Si Advanced High Strength Steel. 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet Galvatech 2015. 754-761. 2015
- Inhibition Breakdown Kinetics of Dual Phase Steels. 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet Galvatech 2015. 928-935. 2015
- Modeling of Interfacial Layer Growth Kinetics on Mn-Containing Steels during Continuous Hot-Dip Galvanizing. 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet Galvatech 2015. 334-341. 2015
- Parametric Study of Wall Shear Stress Developed by an Impinging Planar Jet for Coating Weight Models used in Continuous Hot-dip Galvanizing. 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet Galvatech 2015. 690-696. 2015
- The Effect of Auxiliary Jets on Excited Tones in Gas Jet Wiping. 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet Galvatech 2015. 702-707. 2015
- XPS and EELS Characterization of Mn2SiO4, MnSiO3 and MnAl2O4. 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet Galvatech 2015. 376-383. 2015
- Corrosion behaviour of friction stir welded Mg alloy joints for automotive applications. Materials Science and Technology Conference and Exhibition 2013 MS and T 2013. 1466-1468. 2013
- Global and Localized Corrosion Behaviour of a Coated AM60B Magnesium Alloy. Materials Science and Technology Conference and Exhibition 2013 MS and T 2013. 1591-1599. 2013
- Corrosion Behavior of AZ31B Friction Stir Welds. ECS Meeting Abstracts. 1816-1816. 2013
- Homogenous and carbon graded Fe-22Mn alloys: Microstructure and mechanical properties. Materials Science and Technology Conference and Exhibition 2012 MS and T 2012. 1132-1140. 2012
- A study of galvanizing reactions of hot-rolled-in scale on a Mn/Si DP steel sheet. Aist Steel Properties and Applications Conference Proceedings Combined with MS and T 12 Materials Science and Technology 2012. 29-39. 2012
- Continuous galvanizing of a C-Mn-Si-Mo complex phase ultra high strength steel for automotive anti-intrusion applications. Aist Steel Properties and Applications Conference Proceedings Combined with MS and T 12 Materials Science and Technology 2012. 9-19. 2012
- Fe-Al interfacial layer formation kinetics during the continuous galvanizing of Mn-containing steels. Aist Steel Properties and Applications Conference Proceedings Combined with MS and T 12 Materials Science and Technology 2012. 21-28. 2012
- Homogenous and carbon graded Fe-22Mn alloys: Microstructure and mechanical properties. Aist Steel Properties and Applications Conference Proceedings Combined with MS and T 12 Materials Science and Technology 2012. 337-345. 2012
- Effect of Corrosion on the Tensile Properties of Friction-Stir Welded AZ31B Sheet. Magnesium Technology. 403-408. 2012
- Effect of some Microstructural Parameters on the Corrosion Resistance of Magnesium Alloys. Magnesium Technology. 271-276. 2012
- Stability of Retained Austenite in High-Al, Low-Si TRIP-Assisted Steels Processed via Continuous Galvanizing Heat Treatments. Metallurgical and Materials Transactions A. 3627-3637. 2011
- Effect of process variables on the solidification of hot-dip galvanized coatings. Materials Science and Technology Conference and Exhibition 2010 MS and T 10. 1246-1256. 2010
- Mechanical behavior and microstructural evolution of Fe-22Mn-C TWIP/TRIP steels as a function of C content. Materials Science and Technology Conference and Exhibition 2010 MS and T 10. 1914-1925. 2010
- Numerical investigation of air knives with multiple-impinging slot jets in continuous hot-dip galvanizing. AISTech - Iron and Steel Technology Conference Proceedings. 517-525. 2010
- Reactive wetting and in situ aluminothermic reduction of Mn oxides in continuous galvanizing baths. Materials Science and Technology Conference and Exhibition 2010 MS and T 10. 1279-1290. 2010
- Selective oxidation and reactive wetting of a 1.0% Al - 0.5% Si TRIP-assisted steel. Materials Science and Technology Conference and Exhibition 2010 MS and T 10. 1257-1268. 2010
- Short-term formation kinetics of the continuous galvanizing inhibition layer on Mn-containing steels. Materials Science and Technology Conference and Exhibition 2010 MS and T 10. 1269-1278. 2010
- Continuous galvanizing of ultrahigh-strength martensitic and complex phase steel sheet. Aist Steel Properties and Applications Conference Proceedings Combined with MS and T 10 Materials Science and Technology 2010. 655-666. 2010
- Effect of process variables on the solidification of hot-dip galvanized coatings. Aist Steel Properties and Applications Conference Proceedings Combined with MS and T 10 Materials Science and Technology 2010. 679-689. 2010
- Mechanical behavior and microstructural evolution of Fe-22Mn-C TWIP/TRIP steels as a function of C content. Aist Steel Properties and Applications Conference Proceedings Combined with MS and T 10 Materials Science and Technology 2010. 299-310. 2010
- Reactive wetting and in-situ aluminothermic reduction of Mn oxides in continuous galvanizing baths. Aist Steel Properties and Applications Conference Proceedings Combined with MS and T 10 Materials Science and Technology 2010. 757-768. 2010
- Selective oxidation and reactive wetting of a 1.0% al-0.5% Si TRIP-assisted steel. Aist Steel Properties and Applications Conference Proceedings Combined with MS and T 10 Materials Science and Technology 2010. 691-702. 2010
- Short-term formation kinetics of the continuous galvanizing inhibition layer on Mn-containing steels. Aist Steel Properties and Applications Conference Proceedings Combined with MS and T 10 Materials Science and Technology 2010. 703-711. 2010
- Effect of oxygen partial pressure during annealing on the selective oxidation and galvanizing of a 1.5% Al TRIP-assisted steel. Materials Science and Technology Conference and Exhibition 2009 MS and T 09. 913-924. 2009
- Microstructural evolution and strain-hardening of Fe-30Mn during tensile deformation. Materials Science and Technology Conference and Exhibition 2009 MS and T 09. 1412-1422. 2009
- The effect of carbon content on the microstructure and mechanical properties of high-Mn steels. Materials Science and Technology Conference and Exhibition 2009 MS and T 09. 1381-1390. 2009
- Effect of galvanizing heat treatments on the microstructure and properties of Al-Si TRIP assisted steels during plastic deformation. Materials Science and Technology Conference and Exhibition MS and T 08. 1427-1438. 2008
- The effect of TRIP steel surface chemistry on reactive wetting during hot Dip Galvanizing. Materials Science and Technology Conference and Exhibition MS and T 08. 1397-1408. 2008
- Characterizing reactive wetting kinetics of high-Mn dual-phase steels in hot-dip galvanizing baths. Aist Steel Properties and Applications Conference Proceedings Combined with Ms and T 07 Materials Science and Technology 2007. 317-326. 2007
- Effect of continuous galvanizing heat treatments on the microstructure and mechanical properties of Al-Si TRIP steels. Aist Steel Properties and Applications Conference Proceedings Combined with Ms and T 07 Materials Science and Technology 2007. 295-304. 2007
- Properties of galvanized and galvannealed high strength hot rolled steel. Aist Steel Properties and Applications Conference Proceedings Combined with Ms and T 07 Materials Science and Technology 2007. 305-316. 2007
- Development of the surface structure of TRIP steels prior to hot-dip galvanizing. Materials Science & Engineering: A. 147-156. 2007
- Effect of annealing atmosphere on the galvanizing behavior of a dual-phase steel. Materials Science & Engineering: A. 157-165. 2007
- Effect of continuous galvanizing heat treatments on the microstructure and mechanical properties of Al-Si TRIP steels. Materials Science and Technology Conference and Exhibition MS and T 07 Exploring Structure Processing and Applications Across Multiple Materials Systems. 525-534. 2007
- Air knife coating weight models. AISTech - Iron and Steel Technology Conference Proceedings. 393-401. 2005
- Rapid heat treatment of dual phase steels. Materials Science and Technology. 87-96. 2005
- The Zn-rich corner of the Zn-Al-Fe phase diagram for use in continuous galvanizing. Materials Science and Technology. 199-210. 2005
- The effect of continuous galvanizing thermal cycle on the microstructure and mechanical properties of two multiphase TRIP-assisted steels. Materials Science and Technology. 25-35. 2005
- The Effect of Continuous Galvanizing Process Parameters on the User Properties of Hot-Rolled Transformation Induced Plasticity Steels. SAE Technical Papers. 2005
- Effect of reheating parameters on galvanizing behaviour and properties of high strength hot rolled steels. Galvatech 04 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet Conference Proceedings. 751-762. 2004
- Fe solubility in the Zn-Al-Fe system for use in continuous galvanizing and galvannealing. Galvatech 04 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet Conference Proceedings. 491-499. 2004
- Galvanizing bath management during galvanize to galvanneal and galvanneal to galvanize product transitions. Galvatech 04 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet Conference Proceedings. 855-869. 2004
- Galvanizing of a hot rolled C-Mn-Si TRIP steel. International Conference on Advanced High Strength Sheet Steels for Automotive Applications Proceedings. 405-415. 2004
- Transient flow pattern and temperature distribution in a continuous galvanizing bath resulting from the operation of heating inductors. Galvatech 04 6th International Conference on Zinc and Zinc Alloy Coated Steel Sheet Conference Proceedings. 927-937. 2004
- THE JOINING OF NICKEL-BASED SUPERALLOYS TO SILICON-CARBIDE CERAMICS. CIM Bulletin. 77-77. 1988
- REACTION BONDED SILICON-CARBIDE INCONEL 600 JOINING. CIM Bulletin. 104-104. 1987
- COATING THICKNESS REDUCTION VIA MULTIPLE SLOT AIR-KNIVES
- Comparison of air-knives with multiple-impinging slot jets
- Effect of Heat-to-Coat Treatments on the Properties and Microstructure of High Strength Hot Rolled Steels. 527-538.
- Effect of Strain Path on the Microstructural Evolution of a Fe-22Mn-0.6C Alloy
- FINE-SCALE MICROSTRUCTURE CHARACTERIZATION AND MECHANICAL PROPERTIES OF CGL-COMPATIBLE HEAT TREATED MEDIUM MN TRIP STEEL
- Galvanzing of Martensitic Steels using Heat-to-Coat Processing
- HMnS High Manganese Steel 2014, The 2nd International Conference, 31 August - 4 September 2014, Aachen, Germany, pp.419-422
- HMnS High Manganese Steel 2014, The 2nd International Conference, 31 August - 4 September 2014, Aachen, Germany, pp.447-450
- Influence of an alternative air-knife geometry on coating weight control
- Investigation of coating thickness sensitivity in air knife coating
- SKIN FRICTION MEASUREMENTS ON A LOW MACH NUMBER EXTERNALLY-EXCITED AIR KNIFE MODEL
- Study of a multi-slot air knife in the wiping process of liquid zinc coatings
- THE STABILISATION OF AIR KNIFE FLOWS USING AUXILIARY PLANAR JETS
-
journal articles
- Effect of Si concentration on the liquid metal embrittlement susceptibility of advanced high strength steels. Materialia. 40. 2025
- Effect of Mo Addition on the Susceptibility of Advanced High Strength Steels to Liquid Metal Embrittlement.. Materials. 18:1291. 2025
- In Situ Focused Ion Beam Redeposition Surface Coatings for Site-Specific, Near-Surface Characterization by Atom Probe Tomography.. Microscopy and Microanalysis. 31:ozae126. 2025
- On the reactive wetting of Fe-Mn-Sb alloys during continuous hot-dip galvanizing. Surface and Coatings Technology. 495. 2025
- Austenite formation in a medium-Mn steel during intercritical annealing via in situ high-energy X-ray diffraction. Journal of Materials Research and Technology. 30:2158-2167. 2024
- The effect of Sn microalloying on the selective oxidation of Fe-(6-10 at.%)Mn alloys. Materialia. 34:102090-102090. 2024
- Interfacial Segregation of Sn during the Continuous Annealing and Selective Oxidation of Fe-Mn-Sn Alloys. Materials. 17:1257-1257. 2024
- On the surface segregation of Sn in cold-rolled Fe under continuous annealing conditions. Materialia. 33:102019-102019. 2024
- Process Maps for Predicting Austenite Fraction (vol.%) in Medium-Mn Third-Generation Advanced High-Strength Steels. Materials. 17:993-993. 2024
- On determining the effect of surface-active elemental segregation on the oxide/metal interface: Atomic-scale analysis via HR-TEM. Scripta Materialia. 238:115762-115762. 2024
- Austenite Nucleation and Growth as a Function of Starting Microstructure for a Fe–0.15C–5.56Mn–1.1Si–1.89Al Medium‐Mn Steel. Steel Research International. 94. 2023
- Continuous Hot‐Dip Galvanizing of Medium‐Manganese Third‐Generation Advanced High‐Strength Steels. Steel Research International. 94. 2023
- On determining the surface segregation kinetics of Sb in binary and ternary Fe alloys during continuous annealing. Surfaces and Interfaces. 40:103071-103071. 2023
- On the Selective Oxidation of a 0.15C-6Mn-2Al-1Si Third-Generation Advanced High Strength Steel During Two-Stage Annealing Treatments. Metallurgical and Materials Transactions A. 54:1296-1319. 2023
- Oxidation kinetics of Fe-(2-10)Mn-xSb alloys during annealing. Materialia. 27:101698-101698. 2023
- On the interaction between Mn, Sb and O during the annealing and selective oxidation of Fe-Mn-Sb alloys. Scripta Materialia. 223:115096-115096. 2023
- Selective Oxidation of a Medium-Mn Third Generation Advanced High Strength Steel during Austenitizing and Intercritical Annealing. Journal of the Electrochemical Society. 169:061504-061504. 2022
- Effect of Accelerated Cooling on Linepipe Steel Mill Scale and Resulting Localized Corrosion Susceptibility. Corrosion. 78:168-180. 2022
- Effect of Annealing Atmosphere and Steel Alloy Composition on Oxide Formation and Radiative Properties of Advanced High-Strength Steel Strip. Metallurgical and Materials Transactions B. 53:380-393. 2022
- Effect of Intercritical Annealing Parameters and Starting Microstructure on the Microstructural Evolution and Mechanical Properties of a Medium-Mn Third Generation Advanced High Strength Steel. Metals. 12:356-356. 2022
- Effects of CGL-compatible thermal processing, starting microstructure, and Sn micro-alloying on the mechanical properties of a medium-Mn third generation advanced high strength steel. Materials Science & Engineering: A. 833:142563-142563. 2022
- Flow stabilization and coating thickness reduction through use of multi-slot air-knife in gas jet wiping. Journal of Coatings Technology and Research. 19:143-158. 2022
- Interpreting the radiative properties of advanced high strength steel strip using a hybrid thin film/geometric optics model. Journal of Quantitative Spectroscopy and Radiative Transfer. 277:107963-107963. 2022
- The effect of powder pre-treatment on the mechanical and thermoelectric properties of spark plasma sintered N-type bismuth telluride. Journal of Alloys and Compounds. 874:159782-159782. 2021
- Enhancement of mechanical properties and thermoelectric performance of spark plasma sintered P-type Bismuth Telluride by powder surface oxide reduction. Journal of Alloys and Compounds. 858:157657-157657. 2021
- Local Electrochemical Behavior of Friction Stir Welded Mg-Al-Mn Alloy Joints. Corrosion. 77:183-191. 2021
- Toward a Physical Description of the Role of Germanium in Moderating Cathodic Activation of Magnesium. Corrosion. 77:134-147. 2021
- A Parametric Study of a Multi-Slot Air Knife for Coating Thickness Reduction. ISIJ International. 60:1040-1051. 2020
- Mechanical property development of a 0.15C–6Mn–2Al–1Si third-generation advanced high strength steel using continuous galvanizing heat treatments. Materials Science & Engineering: A. 778:139111-139111. 2020
- Experimental and Numerical Study of Coating Thickness Using Multi-slot Air Knives. Metallurgical and Materials Transactions B. 50:2523-2535. 2019
- Effect of internal oxidation on the weldability of CMnSi steels. Welding in the World, Le Soudage Dans Le Monde. 63:1633-1639. 2019
- Effect of Sn Addition, Process Atmosphere pO2, and Annealing Time on the Selective Oxidation of a C-2Mn-1.7Si (Wt Pct) Advanced High-Strength Steel During Continuous Galvanizing. Metallurgical and Materials Transactions A. 50:2898-2911. 2019
- On the reactive wetting of a medium-Mn advanced high-strength steel during continuous galvanizing. Surface and Coatings Technology. 357:418-426. 2019
- Effect of Process Atmosphere Dew Point and Tin Addition on Oxide Morphology and Growth for a Medium-Mn Third Generation Advanced Steel During Intercritical Annealing. Metallurgical and Materials Transactions A. 49:5561-5573. 2018
- Selective Oxidation of a C-2Mn-1.3Si (Wt Pct) Advanced High-Strength Steel During Continuous Galvanizing Heat Treatments. Metallurgical and Materials Transactions A. 49:5546-5560. 2018
- Effect of dew point on the reactive wetting of a C-2Mn-1.3Si (wt%) advanced high strength steel during continuous galvanizing. Surface and Coatings Technology. 351:11-20. 2018
- The fluctuating velocity field of a forced planar impinging gas jet. Journal of Turbulence. 19:798-825. 2018
- Effect of Jet Oscillation on the Maximum Impingement Plate Skin Friction. Journal of Fluids Engineering, Transactions of the ASME. 140. 2018
- Selective Oxidation of a 0.1C-6Mn-2Si Third Generation Advanced High-Strength Steel During Dew-Point Controlled Annealing. Metallurgical and Materials Transactions A. 49:1795-1808. 2018
- Correction to: Corrosion Performance of Friction Stir Linear Lap Welded AM60B Joints. JOM. 69:2857-2857. 2017
- Studies of interface reactions between zinc and reduced red scale on a Mn/Si dual phase steel. Journal of Alloys and Compounds. 729:257-265. 2017
- Technical Note:Screening of Salt Fog Environments for Mg Alloy Stress Corrosion Cracking Susceptibility. Corrosion. 73:1300-1305. 2017
- Corrosion Performance of Friction Stir Linear Lap Welded AM60B Joints. JOM. 69:2335-2344. 2017
- Non-destructive investigation of aluminum alloy hemmed joints using neutron radiography and X-ray computed tomography. NDT and E International. 91:32-35. 2017
- The Maximum Skin Friction and Flow Field of a Planar Impinging Gas Jet. Journal of Fluids Engineering, Transactions of the ASME. 139. 2017
- Numerical investigation of multiple-slot jets in air-knife wiping. Journal of Coatings Technology and Research. 14:1015-1028. 2017
- Effect of surface preparation on the corrosion resistance of friction stir linear lap welded AZ31B-H24. Canadian Metallurgical Quarterly. 56:308-321. 2017
- Microstructural evolution and mechanical behaviour of Fe-30Mn-C steels with various carbon contents. Materials Science and Technology. 33:1159-1170. 2017
- XPS and EELS characterization of Mn2SiO4, MnSiO3 and MnAl2O4. Applied Surface Science. 379:242-248. 2016
- On the Evolution of Cathodic Activity during Corrosion of Magnesium Alloy AZ31B in a Dilute NaCl Solution. Journal of the Electrochemical Society. 163:C62-C68. 2016
- Corrosion Behavior of Friction Stir Welded Hpdc AM60B Lap Joints. ECS Meeting Abstracts. MA2015-02:664-664. 2015
- Towards Unravelling the Source of Cathode-Activated Corrosion Filaments Formed on Corroding Mg Alloy Surfaces. ECS Meeting Abstracts. MA2015-02:658-658. 2015
- Physical Characterization of Cathodically-Activated Corrosion Filaments on Magnesium Alloy AZ31B. Corrosion. 71:146-159. 2015
- Cathodic Activity of Corrosion Filaments Formed on Mg Alloy AM30. Journal of the Electrochemical Society. 162:C732-C740. 2015
- Effect of carbon content on the mechanical properties and microstructural evolution of Fe–22Mn–C steels. Materials Science & Engineering: A. 621:118-127. 2015
- Decoupling of the softening processes during rapid tempering of a martensitic steel. Materials Science & Engineering: A. 615:395-404. 2014
- Effect of Process Variables on the Grain Size and Crystallographic Texture of Hot-Dip Galvanized Coatings. Metallurgical and Materials Transactions A. 45:3938-3953. 2014
- Microstructure and mechanical properties of a mixed Si–Al TRIP-assisted steel subjected to continuous galvanizing heat treatments. Materials Science & Engineering: A. 608:249-257. 2014
- Effect of Carbon Gradient on the Microstructure and Mechanical Properties of Fe-22Mn-C TWIP/TRIP Steels. Advanced Materials Research. 922:195-200. 2014
- Effect of Grain Size on the Corrosion Resistance of Friction Stir Welded Mg Alloy AZ31B Joints. Journal of the Electrochemical Society. 161:C405-C411. 2014
- Towards a Physical Description for the Origin of Enhanced Catalytic Activity of Corroding Magnesium Surfaces. Electrochimica Acta. 116:396-403. 2014
- Selection of a suitable environment to study the stress corrosion cracking susceptibility of Mg alloy for automotive applications. Materials Science and Technology Conference and Exhibition 2013 MS and T 2013. 3:1611-1615. 2013
- Determination of the constitutive behaviour of AA6022-T4 aluminium alloy spot welds at large strains. Materials Science & Engineering: A. 567:95-100. 2013
- Letter from incoming Editor-in-Chief. Canadian Metallurgical Quarterly. 52:1-1. 2013
- Predicting Transient Softening in the Sub-Critical Heat-Affected Zone of Dual-Phase and Martensitic Steel Welds. ISIJ International. 53:110-118. 2013
- A study of galvanizing reactions of hot-rolled-in scale on a Mn/Si DP steel sheet. Materials Science and Technology Conference and Exhibition 2012 MS and T 2012. 1:155-164. 2012
- Continuous galvanzing of a C-Mn-Si-Mo complex phase ultra high strength steel for automotive anti-intrusion applications. Materials Science and Technology Conference and Exhibition 2012 MS and T 2012. 1:136-146. 2012
- Fe-Al interfacial layer formation kinetics during the continuous galvanizing of Mn-containing steels. Materials Science and Technology Conference and Exhibition 2012 MS and T 2012. 1:147-154. 2012
- On the in situ Aluminothermic Reduction of MnO in the Continuous Galvanizing Bath. Surface and Coatings Technology. 212:152-158. 2012
- The Development of a Processing Window for the Continuous Galvanizing of a Mn–Cr–Si Martensitic Steel. Steel Research International. 83:1103-1117. 2012
- steel research int. 11/2012. Steel Research International. 83. 2012
- Selective Oxidation and Reactive Wetting During Hot-Dip Galvanizing of a 1.0 pct Al-0.5 pct Si TRIP-Assisted Steel. Metallurgical and Materials Transactions A. 43:2426-2441. 2012
- Technical Note:Examination of Focused Ion Beam-Sectioned Surface Films Formed on AM60B Mg Alloy in an Aqueous Saline Solution. Corrosion. 68:468-474. 2012
- Effect of Some Microstructural Parameters on the Corrosion Resistance of Magnesium Alloys. Magnesium Technology. 271-276. 2012
- Measuring Mechanical Properties of Aluminum Sheet and Their Resistance Spot Welds at Large Strains Using Digital Image Correlation Coupled with A Modified Shear Test. SAE Technical Papers. 1. 2012
- Selective Oxidation and Reactive Wetting during Galvanizing of a CMnAl TRIP-Assisted Steel. Metallurgical and Materials Transactions A. 42:2753-2768. 2011
- Reactive wetting of high Mn steels during continuous hot-dip galvanizing. Acta Materialia. 59:3537-3549. 2011
- Continuous galvanizing of ultra high strength martensitic and complex phase steel sheet. Materials Science and Technology Conference and Exhibition 2010, MS and T’10. 2:1223-1234. 2010
- Softening Kinetics in the Subcritical Heat-Affected Zone of Dual-Phase Steel Welds. Metallurgical and Materials Transactions A. 41:2348-2356. 2010
- Effect of Continuous Galvanizing Heat Treatments on the Microstructure and Mechanical Properties of High Al-Low Si Transformation Induced Plasticity Steels. Metallurgical and Materials Transactions A. 41:1460-1473. 2010
- Selective Oxidation and Reactive Wetting of 1.0 Pct Si-0.5 Pct Al and 1.5 Pct Si TRIP-Assisted Steels. Metallurgical and Materials Transactions A. 41:1539-1553. 2010
- Novel Thermal Processing of Dual Phase Steels: II – Work Hardening and Fracture Mechanisms. Canadian Metallurgical Quarterly. 49:91-97. 2010
- Effect of steel substrate roughness on GA and GI coating roughness during the gas-jet wiping process. AISTech - Iron and Steel Technology Conference Proceedings. 2:259-267. 2009
- Microstructural Design of Multiphase Advanced High Strength Steels. Canadian Metallurgical Quarterly. 48:237-245. 2009
- Microstructural Design of Multiphase Advanced High Strength Steels. Canadian Metallurgical Quarterly. 48:237-245. 2009
- Microstructural evolution and strain hardening of Fe–24Mn and Fe–30Mn alloys during tensile deformation. Acta Materialia. 57:3978-3988. 2009
- Electrodeposition of zinc and composite zinc–yttria stabilized zirconia coatings. Journal of Materials Processing Technology. 209:2632-2640. 2009
- Analysis of the Fe–Zn interface of galvanized high Al–low Si TRIP steels. Materials Science & Engineering: A. 491:39-46. 2008
- Morphology and Kinetics of Interfacial Layer Formation during Continuous Hot-Dip Galvanizing and Galvannealing. Metallurgical and Materials Transactions A. 39:2128-2142. 2008
- NOVEL THERMAL PROCESSING OF DUAL PHASE STEELS: I – MICROSTRUCTURAL DESIGN. Canadian Metallurgical Quarterly. 47:83-90. 2008
- NOVEL THERMAL PROCESSING OF DUAL PHASE STEELS: I – MICROSTRUCTURAL DESIGN. Canadian Metallurgical Quarterly. 47:83-90. 2008
- Enhanced hardenability dual-phase steels and the limitations imposed by subsequent continuous hot-dip galvanizing. TMS Annual Meeting. 95-104. 2007
- Influence of chemical composition on the microstructure and mechanical properties of multiphase TRIP-assisted steels processed using thermal cycles compatible with continuous hot-dip galvanizing. Iron and Steel Technology. 4:107-113. 2007
- Coating Weight Model for the Continuous Hot-Dip Galvanizing Process. Metallurgical and Materials Transactions B. 38:413-424. 2007
- Fe Solubility in the Zn-Rich Corner of the Zn-Al-Fe System for Use in Continuous Galvanizing and Galvannealing. Metallurgical and Materials Transactions B. 38:215-230. 2007
- Characterizing reactive wetting kinetics of high-Mn dual-phase steels in hot-dip galvanizing baths. Materials Science and Technology Conference and Exhibition MS and T 07 Exploring Structure Processing and Applications Across Multiple Materials Systems. 1:547-555. 2007
- Properties of galvanized and galvannealed high strength hot rolled steel. Materials Science and Technology Conference and Exhibition MS and T 07 Exploring Structure Processing and Applications Across Multiple Materials Systems. 1:535-546. 2007
- Rf glow discharge optical emission spectrometry for cleaning process control of oil residues in low alloy steel. Journal of Analytical Atomic Spectrometry. 22:411-414. 2007
- ZINC SOLUBILITY MEASUREMENTS AND THERMODYNAMIC EVALUATION OF Zn-Pb-Bi TERNARY SYSTEM. Canadian Metallurgical Quarterly. 45:117-130. 2006
- ZINC SOLUBILITY MEASUREMENTS AND THERMODYNAMIC EVALUATION OF Zn-Pb-Bi TERNARY SYSTEM. Canadian Metallurgical Quarterly. 45:117-130. 2006
- Dilatometric investigations on the decomposition of austenite in two medium-carbon steels with and without Cr and Mo additions. Materials Science and Technology. 1:187-198. 2004
- Galvanizing of high strength hot rolled steels. Materials Science and Technology. 1:793-805. 2004
- ChemInform Abstract: Carbothermal Synthesis of Aluminum Nitride Using Sucrose.. ChemInform. 26:no-no. 1995
- Carbothermal Synthesis of Aluminum Nitride Using Sucrose. Journal of The American Ceramic Society. 77:2165-2172. 1994
- Thermodynamic Brazing Alloy Design for Joining Silicon Carbide. Journal of The American Ceramic Society. 74:1855-1860. 1991
- Brazing of reaction-bonded silicon carbide and Inconel 600 with an iron-based alloy. Journal of Materials Science. 25:4804-4809. 1990
- The interaction of reaction bonded silicon carbide and INCONEL 600 with a nickel based brazing alloy. Composites. 21:182-182. 1990
- The interaction of reaction-bonded silicon carbide and inconel 600 with a nickel-based brazing alloy. Metallurgical and Materials Transactions A. 20:1803-1810. 1989
- Effect of bath Al on interfacial layer formation for continuous galvanized Mn-containing steels. Proc. Galvatech 2013. 171-176.
-
theses
- On the origin of micro-cracking in zinc-coated press hardened steels. Surface and Coatings Technology. 2022