publication venue for
- Backbone model for reinforced concrete block shear wall components and systems using controlled multigene genetic programming. 274:115173-115173. 2023
- Vehicular impacts on precast concrete bridge piers with grouted sleeve connections. 267:114600-114600. 2022
- Demands on acceleration-sensitive nonstructural components in special concentrically braced frame and special moment frame buildings. 260:114031-114031. 2022
- Novel informational bat-ANN model for predicting punching shear of RC flat slabs without shear reinforcement. 256:114030-114030. 2022
- Predicting shear strength of FRP-reinforced concrete beams using novel synthetic data driven deep learning. 257:114083-114083. 2022
- Seismic behavior of full-scale wall piers with high-strength steel reinforcement. 256:114068-114068. 2022
- Parameterized models for prediction of lifetime bearing demands. 252:113649-113649. 2022
- Predicting bearing capacity of double shear bolted connections using machine learning. 251:113497-113497. 2022
- Lessons learned from vehicle collision accident of Dongguofenli Bridge: FE modeling and analysis. 244:112813-112813. 2021
- Machine learning prediction of structural response for FRP retrofitted RC slabs subjected to blast loading. 244:112752-112752. 2021
- Identifying and selecting critical connections for seismic response of steel moment resisting frames. 242:112634-112634. 2021
- Modeling structural behavior of reinforced-concrete pipe with single, double and triple cage reinforcement. 240:112374-112374. 2021
- Effect of rebar self-stress on behavior of autoclaved aerated simply supported R/C thin beams subject to uniform transverse dead load. 238:112242-112242. 2021
- Reinforced masonry shear wall blast response limits for ASCE 59 and CSA S850. 239:112183-112183. 2021
- Collapse risk of controlled rocking steel braced frames considering buckling and yielding of capacity-protected frame members. 237:111999-111999. 2021
- Parameterized coastal fragilities and their application to aging port structures subjected to surge and wave. 237:112235-112235. 2021
- Flexural behavior of reinforced concrete T-section beams strengthened by NSM FRP bars. 233:111922-111922. 2021
- Resistance functions for blast fragility quantification of reinforced concrete block masonry shear walls. 233:111531-111531. 2021
- Seismic performance of RC beam-column edge joints reinforced with austenite stainless steel. 232:111824-111824. 2021
- Using composite yield mechanism to mitigate seismic damage to exposed steel column base connections. 232:111877-111877. 2021
- Assessing the response and fragility of concrete bridges under multi-hazard effect of vessel impact and corrosion. 225:111279-111279. 2020
- Fractional factorial design model for seismic performance of RC bridge piers retrofitted with steel-reinforced polymer composites. 221:111100-111100. 2020
- Machine learning model for predicting structural response of RC slabs exposed to blast loading. 221:111109-111109. 2020
- Extreme responses and associated uncertainties for a long end-anchored floating bridge. 219:110858-110858. 2020
- Investigation of structural behavior of precast concrete pipe with single elliptical steel cage reinforcement. 219:110881-110881. 2020
- Parameterized fragility models for multi-bridge classes subjected to hurricane loads. 208:110213-110213. 2020
- Three-dimensional double friction pendulum bearing model including uplift and impact behavior: Formulation and numerical example. 199:109579-109579. 2019
- Frequency domain prediction of peak nonlinear wave heights of structure-TLD systems. 194:1-10. 2019
- Predicting reinforcing bar development length using polynomial chaos expansions. 195:524-535. 2019
- A hysteretic model for self-centering precast concrete piers with varying shear-slip between segments. 188:350-361. 2019
- Modeling SRP-concrete interfacial bond behavior and strength. 187:220-230. 2019
- Impact assessment of a wind turbine blade root during an offshore mating process. 180:205-222. 2019
- Partially bonded fiber reinforced elastomeric bearings: Feasibility, effectiveness, aging effects, and low temperature response. 179:120-128. 2019
- Comparative analysis of numerically simulated and experimentally measured motions and sectional forces and moments in a floating wind turbine hull structure subjected to combined wind and wave loads. 177:210-233. 2018
- Design-level estimation of seismic displacements for self-centering SDOF systems on stiff soil. 177:431-443. 2018
- A parametric study on the final blade installation process for monopile wind turbines under rough environmental conditions. 172:1042-1056. 2018
- Inelastic response of base-isolated structures subjected to impact. 171:86-93. 2018
- Seismic assessment and loss estimation of existing school buildings in Italy. 168:142-162. 2018
- Wave load effect analysis of a floating bridge in a fjord considering inhomogeneous wave conditions. 163:197-214. 2018
- Performance assessment of metallic sandwich panels under quasi-static loading. 158:79-94. 2018
- Simple mechanical models for the horizontal behavior of elastomeric bearings including the effect of support rotation. 150:996-1012. 2017
- Seismic risk assessment of reinforced masonry structural wall systems using multivariate data analysis. 144:58-72. 2017
- Non-iterative computational model for fiber-reinforced elastomeric isolators. 137:245-255. 2017
- Scoring models for reinforced masonry shear wall maximum displacement prediction under seismic loads. 136:511-522. 2017
- Estimating the added effective damping of SDOF systems incorporating multiple dynamic vibration absorbers with nonlinear damping. 130:154-161. 2017
- Evaluation of an alternative seismic design approach for rigid wall flexible wood roof diaphragm buildings through probabilistic loss estimation and disaggregation. 127:31-39. 2016
- Numerical strategies for damage assessment of reinforced concrete block walls subjected to blast risk. 127:559-582. 2016
- Rational finite element assisted design of precast steel fibre reinforced concrete pipes. 124:196-206. 2016
- Efficient method for probabilistic finite element analysis with application to reinforced concrete slabs. 103:85-101. 2015
- Experimental evaluation of the seismic performance of reinforced concrete structural walls with different end configurations. 101:246-263. 2015
- Exploratory study of ultra-high performance fiber reinforced concrete tunnel lining segments with varying steel fiber lengths and dosages. 101:733-742. 2015
- The nonlinear peak response distribution of structure–TLD systems during common wind events. 100:226-237. 2015
- A case study on the application of passive control and seismic isolation techniques to cable-stayed bridges: A comparative investigation through non-linear dynamic analyses. 99:232-252. 2015
- Experimental and finite element study on the lateral response of modified rectangular fiber-reinforced elastomeric isolators (MR-FREIs). 85:293-303. 2015
- Mechanical performance of full-scale precast steel fibre-reinforced concrete pipes. 84:287-299. 2015
- Fire induced progressive collapse of steel building structures: A review of the mechanisms. 82:261-267. 2015
- Experimental and finite element study on the compression properties of Modified Rectangular Fiber-Reinforced Elastomeric Isolators (MR-FREIs). 74:52-64. 2014
- Experimental study on settlement and punching behavior of full-scale RC and SFRC precast tunnel lining segments. 72:1-10. 2014
- Behavior and analysis of inverted T-shaped RC beams under shear and torsion. 68:57-70. 2014
- Experimental investigation of load distribution in a composite girder bridge at elastic versus inelastic states. 49:707-718. 2013
- Analytical modeling and axial load design of a novel FRP-encased steel–concrete composite column for various slenderness ratios. 46:526-534. 2013
- Inelastic load distribution in multi-girder composite bridges. 44:234-247. 2012
- A preliminary design method for tuned liquid dampers conforming to space restrictions. 40:187-197. 2012
- Long-term fatigue analysis of multi-planar tubular joints for jacket-type offshore wind turbine in time domain. 33:2002-2014. 2011
- A hybrid structural control system using a tuned liquid damper to reduce the wind induced motion of a base isolated structure. 33:738-746. 2011
- Shear capacity evaluation of steel reinforced recycled concrete (RRC) beams. 33:1025-1033. 2011
- Development of corrosion-free concrete beam–column joint with adequate seismic energy dissipation. 32:2518-2528. 2010
- Behavior of fully grouted reinforced concrete masonry shear walls failing in flexure: Analysis. 31:2032-2044. 2009
- Analytical prediction of the seismic behaviour of superelastic shape memory alloy reinforced concrete elements. 30:3399-3411. 2008
- Modelling and preliminary design of a structure-TLD system. 30:2644-2655. 2008
- Influence of passive supplemental damping systems on structural and nonstructural seismic fragilities of a steel building. 30:675-682. 2008
- Seismic performance of RC frames with concentric internal steel bracing. 29:1561-1568. 2007
- Behavior of bridge girders with corrugated webs under monotonic and cyclic loading. 28:1941-1955. 2006
- The impact of the 26 December 2004 earthquake and tsunami on structures and infrastructure. 28:312-326. 2006
- Retrofit of RC square short columns. 27:801-813. 2005
- Flexural and shear hysteretic behaviour of reinforced concrete columns with variable axial load. 25:1353-1367. 2003
- Hysteretic damping of wood framed buildings. 25:461-471. 2003
- Seismic rehabilitation of beam–column joint using GFRP sheets. 24:1397-1407. 2002
- Performance-based design in earthquake engineering: state of development. 23:878-884. 2001
- Rehabilitation of a reinforced concrete frame using eccentric steel bracing. 23:745-755. 2001
- Non-linear cable response to multiple support periodic excitation. 22:1301-1312. 2000
- Evaluation of retrofit strategies for reinforced concrete columns:. 22:490-501. 2000
- Dynamic analysis of reinforced concrete frames including joint shear deformation. 21:971-987. 1999
- Modelling of reinforced concrete structural walls. 21:912-923. 1999
- Nonlinear seismic response of concrete gravity dams with dam–reservoir interaction. 21:306-315. 1999
- Response of transmission lines to multiple support excitation. 18:936-946. 1996
- Site effects on the seismic response of a suspension bridge. 18:363-370. 1996
- Adequate ductility in steel beams under earthquake-type loading. 18:179-189. 1996
- Dynamic response of hollow section frames with bolted moment connections. 17:737-748. 1995
- Seismic analysis of asymmetric multistorey buildings including foundation interaction and P-Δ effects. 16:609-624. 1994
- Bolted link-column joints in eccentrically braced frames. 16:33-41. 1994
- On the computation of seismic energy in inelastic structures. 16:425-436. 1994
- Seismic performance of moment resisting frames with flexible joints. 15:117-134. 1993
- Effect of axial forces on the performance of links in eccentrically braced frames. 12:106-113. 1990
- Behaviour of extended end-plate connections under cyclic loading. 12:15-27. 1990
- Seismic response of multi-storey steel buildings with flexible connections. 10:239-248. 1988
- Seismic performance of highway bridges. 10:157-166. 1988
- Seismic response of multi-storey buildings including foundation interaction and effects. 9:277-284. 1987
- Shear strengthening of beam-column joints 2002
- Design of Tension-Only Concentrically Braced Steel Frames for seismic induced impact loading 1998