selected scholarly activity
-
chapters
- Elastostatics of Spherical Capsules in Self-healing Cement Matrix. Lecture Notes in Civil Engineering. 1091-1107. 2024
- Properties and Performance Metrics of Healing Agents in Self-healing Concrete. Lecture Notes in Civil Engineering. 403-414. 2023
- Introduction. Canadian Journal of Civil Engineering. xv-xxvii. 2013
-
conferences
- Relationships between free and water-soluble chloride concentrations in concrete. Proceedings, Annual Conference - Canadian Society for Civil Engineering. 2019
- Self-healing concrete: A critical review. Proceedings, Annual Conference - Canadian Society for Civil Engineering. 2019
- Reactivity of cement mixtures containing waste glass using thermal analysis. Journal of Thermal Analysis and Calorimetry. 849-858. 2011
- Capillary suction model for characterizing salt scaling resistance of concrete containing GGBFS. Cement and Concrete Composites. 570-576. 2009
- Plastic viscosity of fresh concrete – A critical review of predictions methods. Cement and Concrete Composites. 535-544. 2009
- Waste glass as a supplementary cementitious material in concrete – Critical review of treatment methods. Cement and Concrete Composites. 606-610. 2009
- Life-cycle cost assessment and service life estimate of precast concrete culverts. LIFE-CYCLE CIVIL ENGINEERING. 857-861. 2008
- The influence of ground granulated blast furnace slag on salt scaling resistance of concrete. 5th International PhD Symposium in Civil Engineering - Proceedings of the 5th International PhD Symposium in Civil Engineering. 269-276. 2004
- Recent developments in inspection and testing for infrastructure. Proceedings, Annual Conference - Canadian Society for Civil Engineering. 365-374. 1998
- Service Life of Patches in Concrete Flat Slabs. IUTAM Bookseries. 299-308. 1997
- A comparative study of modelling the dynamic characteristics of a solid-stone masonry tower. STRUCTURAL STUDIES OF HISTORICAL BUILDINGS IV - VOL 2: DYNAMICS, REPAIRS & RESTORATION. 11-18. 1995
- Use of impulse radar for investigating the integrity of stone-masonry walls. NONDESTRUCTIVE TESTING IN CIVIL ENGINEERING - 1995 INTERNATIONAL SYMPOSIUM, VOLS 1 & 2, INTERNATIONAL SYMPOSIUM. 487-494. 1995
-
journal articles
- Performance of capsules in self-healing early-age concrete due to restrained shrinkage. Construction and Building Materials. 436:136984-136984. 2024
- Accessibility of the Built Environment for People with Sensory Disabilities—Review Quality and Representation of Evidence. Buildings. 14:707-707. 2024
- Linking Concrete Rheology to Strength: Sustainability Model Approach. ACI Materials Journal. 120:77-88. 2023
- Performance Modeling of Spherical Capsules during Mixing of Self-Consolidating Concrete. Materials. 16:2379-2379. 2023
- Probability Characteristics of a Crack Hitting Spherical Healing Agent Particles: Application to a Self-Healing Cementitious System. Materials. 15:7355-7355. 2022
- Performance of Capsules in Self-Healing Cementitious Material. Materials. 15:7302-7302. 2022
- Climate Change Effects on Heating and Cooling Demands of Buildings in Canada. CivilEng. 3:277-295. 2022
- Radiation shielding properties of modified concrete mixes and their suitability in dry storage cask. Progress in Nuclear Energy. 148:104195-104195. 2022
- BECOP: A New Metric for Measuring the Energy Performance of the Building Envelope. Buildings. 12:553-553. 2022
- Effective free water diffusion coefficient of cement paste internally cured with superabsorbent polymers. Journal of Building Engineering. 45:103600-103600. 2022
- Mechanical and radiation shielding properties of concrete containing commercial boron carbide powder. Construction and Building Materials. 313:125466-125466. 2021
- Spent nuclear fuel interim dry storage; Design requirements, most common methods, and evolution: A review. Annals of Nuclear Energy. 160:108408-108408. 2021
- Characterizing the effect of superabsorbent polymer content on internal curing process of cement paste using calorimetry and nuclear magnetic resonance methods. Journal of Thermal Analysis and Calorimetry. 145:437-449. 2021
- MRCsC: A user-friendly software for predicting shielding effectiveness against fast neutrons. International Journal of Radiation Applications and Instrumentation. Nuclear Tracks and Radiation Measurements. 182:109356-109356. 2021
- Efficiency measure of SAP as internal curing for cement using NMR & MRI. Construction and Building Materials. 278:122365-122365. 2021
- Electrical resistivity model for quantifying concrete chloride diffusion coefficient. Cement and Concrete Composites. 113:103707-103707. 2020
- A holistic model for cement paste and concrete chloride diffusion coefficient. Cement and Concrete Research. 133:106049-106049. 2020
- Sustainability framework for buildings via data analytics. Building and Environment. 172:106730-106730. 2020
- Cement degree of hydration in mortar and concrete. Journal of Thermal Analysis and Calorimetry. 138:2305-2313. 2019
- Phenomenological model for quantifying concrete chloride diffusion coefficient. Construction and Building Materials. 224:773-784. 2019
- Quantification of concrete chloride diffusion coefficient – A critical review. Cement and Concrete Composites. 99:225-250. 2019
- Sustainability and resiliency metrics for buildings – Critical review. Building and Environment. 101:116-125. 2016
- Assessment of concrete compressive strength prediction models. KSCE Journal of Civil Engineering. 20:343-358. 2016
- Rheological models for predicting plastic viscosity and yield stress of fresh concrete. Cement and Concrete Research. 49:1-9. 2013
- Compressive strength model for concrete. Magazine of Concrete Research. 65:557-572. 2013
- Computational tools for selecting energy conservation measures for retrofitting existing office buildings. Canadian Journal of Civil Engineering. 40:445-459. 2013
- Constitutive flow models for characterizing the rheology of fresh mortar and concrete. Canadian Journal of Civil Engineering. 40:475-482. 2013
- The effect of short duration NaCl exposure on the surface pore structure of concrete containing GGBFS. Materials and Structures/Materiaux et Constructions. 45:1245-1258. 2012
- Effect of Cold Temperature on the Chloride-Binding Capacity of Cement. Journal of Cold Regions Engineering - ASCE. 25:133-144. 2011
- Performance of dry cast concrete blocks containing waste glass powder or polyethylene aggregates. Cement and Concrete Composites. 33:855-863. 2011
- Effectiveness of single and multiple energy retrofit measures on the energy consumption of office buildings. Energy. 36:5037-5052. 2011
- A screening methodology for implementing cost effective energy retrofit measures in Canadian office buildings. Energy and Buildings. 43:614-620. 2011
- Evaluating Institutional Green Building Policies: A Mixed-Methods Approach. Journal of Green Building. 5:115-131. 2010
- Out-of-Plane Bending of Masonry Walls With Near-Surface Mounted and Externally Bonded Reinforcement. Australian Journal of Structural Engineering. 11:141-153. 2010
- Sustainability of Civil Engineering Structures – Durability of concrete. Cement and Concrete Composites. 31:513-514. 2009
- Assessment of two a posteriori error estimators for elasticity problems. Canadian Journal of Civil Engineering. 35:1239-1250. 2008
- Numerical investigation of the reliability of a posteriori error estimation for advection–diffusion equations. International Journal for Numerical Methods in Biomedical Engineering. 24:711-726. 2008
- A posteriori error estimation based on numerical realization of the variational multiscale method. Computer Methods in Applied Mechanics and Engineering. 197:3637-3656. 2008
- Evolution of mechanical properties of concrete containing ground granulated blast furnace slag and effects on the scaling resistance test at 28days. Cement and Concrete Composites. 30:63-71. 2008
- Dry-cast concrete masonry products: properties and durabilityThis article is one of a selection of papers published in this Special Issue on Masonry.. Canadian Journal of Civil Engineering. 34:1413-1423. 2007
- Effects of waste glass additions on the properties and durability of fired clay brickThis article is one of a selection of papers published in this Special Issue on Masonry.. Canadian Journal of Civil Engineering. 34:1458-1466. 2007
- Special issue on masonry - Introduction. Canadian Journal of Civil Engineering. 34:V-V. 2007
- Ultrasonic pulse velocity for determining the early age properties of dry-cast concrete containing ground granulated blast-furnace slag. Canadian Journal of Civil Engineering. 34:682-685. 2007
- Multi-variable statistical analysis for scaling resistance of concrete containing GGBFS. Cement and Concrete Composites. 29:39-48. 2007
- Slump and slump flow for characterizing yield stress of fresh concrete. ACI Materials Journal. 103:413-418. 2006
- Modelling the rheological behaviour of fresh concrete: An elasto-viscoplastic finite element approach. Computers and Concrete. 2:97-110. 2005
- Semi-formal design of reliable mesh generation systems. Advances in Engineering Software. 35:827-841. 2004
- Correlation of Rheological Properties to Durability and Strength of Hardened Concrete. Journal of Materials in Civil Engineering. 15:391-399. 2003
- Upgrading Torsional Resistance of Reinforced Concrete Beams Using Fiber-Reinforced Polymer. Journal of Composites for Construction. 6:257-263. 2002
- Controlling the quality of fresh concrete—a new approach. Magazine of Concrete Research. 52:353-363. 2000
- Predictive models for deterioration of concrete structures. Construction and Building Materials. 10:27-37. 1996
- A simplified welding arc model by the finite element method. Computers & structures. 53:1235-1241. 1994
- A new transient method for analysis of solidification in the continuous casting of metals. Applied Scientific Research, Section B. 51:573-597. 1993
- Thermal behaviour of masonry walls: Mathematical modelling and field monitoring. Building Research & Information. 21:280-287. 1993
- Mathematical model of phase transformations and elastoplastic stress in the water spray quenching of steel bars. Metallurgical and Materials Transactions A. 24:795-808. 1993
- Thermal stress analysis due to welding processes by the finite element method. Computers & structures. 46:407-412. 1993
- Finite element modeling of transient heat transfer and microstructural evolution in welds: Part II. Modeling of grain growth in austenitic stainless steels. Metallurgical and Materials Transactions B. 23:841-845. 1992