Microstructural Evolution from Shaped Charge through Steel Plates

A set of 18 armour steel plates were stacked on top of each other and subjected to shape charges that went through the plates and created a hole that decreased in diameter as it went through consecutive plates. Afterwards, the plates were examined and the hardness near the hole and away from the hole was taken to determine the effect of the passing of the shaped charge through the plates. Also, specimens from the walls of the holes were taken to determine changes in the microstructure due to the shock wave and the resulting excessive heating from the shape charge. It was observed that the shock wave produced significant changes in the microstructure resulting in the appearance adiabatic shear bands (ASBs). These ASBs persisted in holes in plates placed further down the stack (up to 8thin the stack). More complex microstructural mechanisms are thought to take place as opposed to erosion from the flow of the molten metal through the holes in the plates.

Microstructural Evolution from Shaped Charge through Steel Plates Conferences