publication venue for
- Confinement effects on microstructure length scale selection in chill-cast stainless steel. 38:102229. 2024
- Evaluation of microstructure heterogeneity in INCONEL 625 thin-wall fabricated by Laser Powder Bed Fusion additive manufacturing. 35:102126-102126. 2024
- The effect of Sn microalloying on the selective oxidation of Fe-(6-10 at.%)Mn alloys. 34:102090-102090. 2024
- Decoding stress-strain parameters in FCC metals using digital constitutive analyses to devolve dynamic obstacle-strength factor and diffuse necking. 33:102045-102045. 2024
- Multi-scale and multi-physics simulation of central segregation in an equiaxed dendritic mushy zone during continuous casting of steel. 33:102003-102003. 2024
- On the surface segregation of Sn in cold-rolled Fe under continuous annealing conditions. 33:102019-102019. 2024
- The effect of solutionizing heat treatment on ductility loss and damage evolution in AA7075 aluminum sheet deformed at 450°C. 32:101936-101936. 2023
- Oxidation kinetics of Fe-(2-10)Mn-xSb alloys during annealing. 27:101698-101698. 2023
- Liquid cell transmission electron microscopy reveals C-S-H growth mechanism during Portland cement hydration. 22:101387-101387. 2022
- Effects of nanosized precipitates on the Portevin-Le Chatelier behavior: Model prediction and experimental verification. 21:101299-101299. 2022
- Capturing Dislocation Half-Loop Formation and Dynamics in Epitaxial Growth Atomistically at Diffusive Time Scales. 20:101253-101253. 2021
- Constitutive modeling of flow stress and work hardening behavior while considering dynamic strain aging. 18:101137-101137. 2021
- Liquid metal embrittlement transport mechanism in the Fe/Zn system: Stress-assisted diffusion. 18:101153-101153. 2021
- Thermal stability and machining performance of arc evaporated Ti1-xAlxN hard PVD coatings with x=0.5 – 0.73 ratios using an integrative approach. 17:101132-101132. 2021
- Superelasticity preservation in dissimilar joint of NiTi shape memory alloy to biomedical PtIr. 16:101090-101090. 2021
- Occurrence of liquid-metal-embrittlement in a fully ferritic microstructure. 15:101036-101036. 2021
- Novel approach for the development of tailored heterogenous structures in steel. 13:100831-100831. 2020
- Semi-solid compression of nano/micro-particle reinforced Al-Cu composites: An in situ synchrotron tomographic study. 12:100817-100817. 2020
- Use of in-situ laser-ultrasonics measurements to develop robust models combining deformation, recovery, recrystallization and grain growth. 12:100812-100812. 2020
- 4D synchrotron tomographic imaging of network and fibre level micromechanics in softwood paper. 11:100680-100680. 2020
- Suppression of liquid-metal-embrittlement by twin-induced grain boundary engineering approach. 11:100668-100668. 2020
- Thermal and athermal contributions to the flow stress of martensite. 11:100719-100719. 2020
- Meso-scale simulation of liquid feeding in an equiaxed dendritic mushy zone. 9:100612-100612. 2020
- A 3D meso-scale solidification model for metallic alloy using a volume average approach. 6:100329-100329. 2019
- Microstructural assessment of 310S stainless steel during creep at 800 °C. 6:100330-100330. 2019
- Concurrent photocatalytic degradation of organic contaminants and photocathodic protection of steel Ag–TiO2 composites. 3:212-217. 2018