publication venue for
- Placement of vents to reduce shaft flux in two pole induction motors with a comment on heating effects 1992
- Diagnosis of Mechanical and Electrical Faults in Electric Machines Using a Lightweight Frequency-Scaled Convolutional Neural Network. PP:1-11. 2024
- Fourier-Based Modeling of an Induction Machine Considering the Finite Permeability and Nonlinear Magnetic Properties. 36:3427-3437. 2021
- A Novel Three-Dimensional Analytical Approach for Acoustic Noise Modeling in Switched Reluctance Machines. 36:2099-2109. 2021
- BLDC Motor Drives: A Single Hall Sensor Method and a 160° Commutation Strategy. 36:2025-2035. 2021
- A Review of Predictive Control Techniques for Switched Reluctance Machine Drives. Part I: Fundamentals and Current Control. 36:1313-1322. 2021
- A Review of Predictive Control Techniques for Switched Reluctance Machine Drives. Part II: Torque Control, Assessment and Challenges. 36:1323-1335. 2021
- Influencing Parameters on Discharge Bearing Currents in Inverter-Fed Induction Motors. 36:940-949. 2021
- Design Optimization of a PM Motor: A Practical Approach for Mass Production. 35:1849-1858. 2020
- Operational Envelope of an Electric Transmission Auxiliary System. 35:1513-1521. 2020
- Advanced Design Optimization Technique for Torque Profile Improvement in Six-Phase PMSM Using Supervised Machine Learning for Direct-Drive EV. 34:2041-2051. 2019
- Characterization of a Hybrid PM Generator Using a 32-Phase Brushless Excitation Scheme. 34:1391-1400. 2019
- Exploring the Phase Angle of Measured Speed Harmonic for Efficient Permanent Magnet Temperature Estimation of PMSMs. 34:1475-1484. 2019
- Multiple Reference Frame-Based Extended Concentrated Wound PMSM Model Considering PM Flux Linkage and Inductance Harmonics. 34:731-740. 2019
- Design and Optimization of Traction IPMSM With Asymmetrical Damper Bars for Integrated Charging Capability Using Evolutionary Algorithm. 33:2060-2069. 2018
- Development of an External Rotor V-Shape Permanent Magnet Machine for E-Bike Application. 33:1650-1658. 2018
- Maximum Efficiency Control of PMSM Drives Considering System Losses Using Gradient Descent Algorithm Based on DC Power Measurement. 33:2240-2249. 2018
- Design of a Multiphase Hybrid Permanent Magnet Generator for Series Hybrid EV. 33:1499-1507. 2018
- Advanced Dynamic Modeling of Three-Phase Mutually Coupled Switched Reluctance Machine. 33:146-154. 2018
- Hybrid Acoustic Noise Analysis Approach of Conventional and Mutually Coupled Switched Reluctance Motors. 32:1042-1051. 2017
- Double Segmented Rotor Switched Reluctance Machine With Shared Stator Back-Iron for Magnetic Flux Passage. 31:1278-1286. 2016
- Acoustic Noise Analysis of a High-Speed High-Power Switched Reluctance Machine: Frame Effects. 31:69-77. 2016
- An Offline Torque Sharing Function for Torque Ripple Reduction in Switched Reluctance Motor Drives. 30:726-735. 2015
- Double-Rotor Switched Reluctance Machine (DRSRM). 30:671-680. 2015
- A Switched Reluctance Machine-Based Starter/Alternator for More Electric Cars. 19:116-124. 2004
- A new synthetic loading for large induction machines with no feedback into the power system. 17:319-324. 2002
- Determining total losses and temperature rise in induction motors using equivalent loading methods. 16:214-219. 2001
- Dynamic motor parameter identification for high speed flux weakening operation of brushless permanent magnet synchronous machines. 14:486-492. 1999
- Peak power bi-directional transfer from high speed flywheel to electrical regulated bus voltage system: a practical proposal for vehicular technology. 13:34-41. 1998
- Measurement of the torque-speed characteristics of induction motors using an improved new digital approach. 5:565-571. 1990