publication venue for
- An experimental assessment of fracture parameters and microstructure of concrete exposed to calcium leaching. 451:138856. 2024
- Ultra-high-performance concrete for nuclear applications: A review of raw materials and mix design approaches. 438:136938-136938. 2024
- Performance of capsules in self-healing early-age concrete due to restrained shrinkage. 436:136984-136984. 2024
- Effects of a red mud mineralogical composition versus calcination on its pozzolanicity. 404:133238-133238. 2023
- Development of sustainable ultra-high performance concrete recycling aluminum production waste. 371:130212-130212. 2023
- Anti-aging performance and mechanism analysis of styrene–butadiene–styrene modified bitumen containing antioxidant/cinnamic acid intercalated layered double hydroxides. 361:129660-129660. 2022
- Investigation of low-temperature cracking resistance of asphalt mixtures by conducting Disc-Shaped Compact Tension (DC(T)) and Semi-Circular Bend (SCB) tests. 359:129275-129275. 2022
- Aging evaluation of base and SBS modified bitumens under the coupling effect of multiple aging factors. 348:128670-128670. 2022
- Impact of salt crystallization on the mechanical properties of structural masonry: An experimental and numerical study. 344:128062-128062. 2022
- Comparing the effects of in-situ nano-calcite development and ex-situ nano-calcite addition on cement hydration. 321:126369-126369. 2022
- Failure of existing structures with semi-brittle mechanical properties on meso scale and reduction of computational cost using non-linear topology optimization. 319:126071-126071. 2022
- Thermal performance of a novel building wall incorporating a dynamic phase change material layer for efficient utilization of passive solar energy. 317:126017-126017. 2022
- Exposure duration and sub-zero temperature effects on concrete chloride diffusion decay index and binding. 313:125368-125368. 2021
- Mechanical and radiation shielding properties of concrete containing commercial boron carbide powder. 313:125466-125466. 2021
- Utilization of carbon nanotubes (CNTs) in concrete for structural health monitoring (SHM) purposes: A review. 309:125137-125137. 2021
- Effect of sub-zero versus sub-freezing temperature on chloride diffusion and binding in concrete. 287:123057-123057. 2021
- Efficiency measure of SAP as internal curing for cement using NMR & MRI. 278:122365-122365. 2021
- Fatigue behaviour of reclaimed pavement materials treated with cementitious binders. 249:118565-118565. 2020
- Quantitative comparison of surface and interface adhesive properties of fine aggregate asphalt mixtures composed of basalt, steel slag, and andesite. 246:118507-118507. 2020
- Study on impact of variables to pavement preheating operation in HIR by using FEM. 243:118304-118304. 2020
- Development of ecological strain-hardening cementitious composites incorporating high-volume ground-glass pozzolans. 238:117740-117740. 2020
- A nonlinear semi-analytical model for predicting debonding of FRP laminates from RC beams subjected to uniform or concentrated load. 233:117838-117838. 2020
- Characterization and nano-engineering the interface properties of PVA fibers in strain-hardening cementitious composites incorporating high-volume ground-glass pozzolans. 234:117213-117213. 2020
- Characterisation of full-depth reclaimed pavement materials treated with hydraulic road binders. 226:778-792. 2019
- Effects of preheating conditions on performance and workability of hot in-place recycled asphalt mixtures. 226:288-298. 2019
- Phenomenological model for quantifying concrete chloride diffusion coefficient. 224:773-784. 2019
- A theoretical model on the influence of ring joint stiffness on dynamic responses from underground tunnels. 223:69-80. 2019
- The thermal diffusivity of hemplime, and a method of direct measurement. 212:707-715. 2019
- Nanocellulose for improved concrete performance: A macro-to-micro investigation for disclosing the effects of cellulose filaments on strength of cement systems. 206:84-96. 2019
- Acid attack on geopolymer cement mortar based on waste-glass powder and calcium aluminate cement at mild concentration. 193:363-372. 2018
- Assessing benefits of pre-soaked recycled concrete aggregate on variably cured concrete. 141:245-252. 2017
- Finite element model for predicting post delamination behaviour in FRP-retrofitted beams in flexure. 131:195-204. 2017
- Evaluation of freeze/thaw and scaling response of nanoconcrete for Portland Cement Concrete (PCC) pavements. 120:465-472. 2016
- A novel method for evaluating hot mix asphalt fatigue damage: X-ray computed tomography. 113:121-133. 2016
- Evaluation of various treatment methods for enhancing the physical and morphological properties of coarse recycled concrete aggregate. 112:284-298. 2016
- Post-earthquake evaluation of pipelines rehabilitated with cured in place lining technology using acoustic emission. 54:326-338. 2014
- Effect of recycled concrete coarse aggregate from multiple sources on the hardened properties of concrete with equivalent compressive strength. 47:1292-1301. 2013
- Pushover analysis of large scale unreinforced masonry structures by means of a fully 2D non-linear model. 41:276-295. 2013
- Alternative modeling framework for pervious concrete pavement condition analysis. 25:4043-4051. 2011
- Predictive models for deterioration of concrete structures. 10:27-37. 1996
- Use of polymer grids for short- and long-term crack control in concrete slabs. 9:305-314. 1995