Engineering applications of new probabilistic seismic ground-motion maps of Canada

New peak horizontal acceleration and velocity zoning maps with a probability of exceedance of 10% in 50 years and seven seismic zones are developed from new probabilistic strong seismic ground-motion estimates for replacement of the 1970 seismic zoning map in the National Building Code of Canada. The adoption of a probability of exceedance of 10% in 50 years produces reference seismic ground motion appropriate to the level of protection afforded by provisions of the current code; the use of two ground-motion parameters, the relative levels of which vary considerably throughout the country, provides independent reference levels for structures having short and long fundamental periods.For calculating seismic base shear, a new seismic response factor is derived in which seismic forces for long-period structures are directly proportional to zonal velocities, and for short-period structures proportional to zonal accelerations, with an upper limit on the acceleration/velocity ratio applicable for any location. To maintain the same design standard as provided by the current code, the base shear is calibrated to remain the same, on average, in large population centres in regions of moderate to high seismic risk. The resulting changes in the base shear applicable at various locations reflect the improved estimates of seismic risk, in particular the introduction of additional zones in the higher risk regions of the country and the higher levels of short-period ground motion estimated for some regions of eastern Canada.These and associated changes in seismic design provisions have been recommended for adoption in the 1985 edition of the National Building Code of Canada.