selected scholarly activity
-
books
-
chapters
- Realizing Clean Combustion with Ether Fuels. 43-59. 2023
- Case Studies—Sustainable and Lightweight Automotive Parts via Injection Molding. 453-470. 2017
- Life Cycle Assessment of Lightweight Materials for Automotive Applications. 423-452. 2017
- Natural Fiber Reinforced Thermoplastic Composites. 1-38. 2017
- Case Studies—Sustainable and Lightweight Automotive Parts via Injection Molding. 453-470. 2017
- 4 Natural fiber and hybrid fiber thermoplastic composites Advancements in lightweighting applications. 39-72. 2017
- Case studies-sustainable and lightweight automotive parts via injection molding. 453-470. 2017
- High Energy Multipole Distribution Spark Ignition System. 109-130. 2017
- Life cycle assessment of lightweight materials for automotive applications. 423-452. 2017
- Natural fiber and hybrid fiber thermoplastic composites. 39-72. 2017
- Natural fiber reinforced thermoplastic composites. 1-38. 2017
- 6 Lignin Reinforcement in Thermoplastic Composites. 95-118. 2016
- Lignin Reinforcement in Thermoplastic Composites. 95-118. 2016
- Shape memory polyurethane for structural applications. 133-162. 2016
- Green Composite Manufacturing via Compression Molding and Thermoforming. 45-63. 2015
-
conferences
- Performance of Spark Current Boost System on a Production Engine under Lean-Burn Conditions. SAE Technical Papers. 2024
- Non-Conventional Concentric Winding Layout Design of Hairpin Windings for Enhanced Traction Performance of Induction Machines. IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society. 1-7. 2023
- Surrogate-Based Modeling of Induction Machines to Reduce the Computational Burden of Robust Multi-Objective Optimization. 2023 IEEE International Magnetic Conference - Short Papers (INTERMAG Short Papers). 1-2. 2023
- Surrogate-Based Modeling of Induction Machines to Reduce the Computational Burden of Robust Multi-Objective Optimization. Digests of the Intermag Conference. 2023
- Performance and Emission Characteristics of Direct Injection DME Combustion under Low NOx Emissions. SAE Technical Papers. 2023
- Electric Powertrain Efficiency Improvement for Autonomous Vehicles Using Genetic Algorithms for Optimized Speed Profile Creation. 2022 25th International Conference on Electrical Machines and Systems (ICEMS). 2022
- Powertrain photography and visualization using SWIM (Sequential Wave Imprinting Machine) for veyance safety. 2022 IEEE International Conference on Vehicular Electronics and Safety (ICVES). 2022
- Impact of Discharge Current Profiling on Ignition Characteristics of Hydrogen/Methane Blends. ASME 2022 ICE Forward Conference. 2022
- An optical investigation into the reactive fuel spray of high-pressure DME and Ethanol. COMODIA 2022 - 10th International Conference on Modeling and Diagnostics for Advanced Engine Systems. 293-301. 2022
- An Investigation of OME3-Diesel Fuel Blend on a Multi-Cylinder Compression Ignition Engine. SAE Technical Papers. 2022
- Impact of Plasma Stretch on Spark Energy Release Rate under Flow Conditions. SAE Technical Papers. 2022
- Investigation of Al <sub>2</sub> O <sub>3</sub> -Ni Coated Cast Iron Brake Rotors Under Modified Brake Dynamometer Test Standards. SAE Technical Papers. 2261-2268. 2022
- An Investigation of the Microstructure and Oil Retention of Electrolyte Jet Plasma Oxidation (EJPO) Coating. Minerals, Metals and Materials Series. 629-639. 2022
- Wear and Corrosion Behaviours of PEA Alumina Coatings on Gray Cast Iron. SAE Technical Papers. 2022
- A Review of Existing Multi-Motor Electric Powertrain Sizing Strategies. 2021 24th International Conference on Electrical Machines and Systems (ICEMS). 2419-2424. 2021
- Ignition Stability Improvement and Emission Reduction via Multiple Ignition Sites Strategy Under Cold Start and Transient Conditions. ASME 2021 Internal Combustion Engine Division Fall Technical Conference. 2021
- Impact of Fuel Injection Pressure on Spray and Combustion Characteristics of OME and Diesel Blends. ASME 2021 Internal Combustion Engine Division Fall Technical Conference. 2021
- Improvement of Electromagnetic Force and Acceleration in an Asymmetrical Star-Delta Winding IPMSM through Stator and Rotor Geometrical Modifications. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. 2021
- Non–Dominated Sorting Genetic Algorithm Based Determination of Optimal Torque–Split Ratio for a Dual–Motor Electric Vehicle. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. 2021
- Permeance–Based Equivalent Circuit Modeling of Induction Machines Considering Leakage Reactances and Non–Linearities for Steady–State Performance Prediction. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. 2021
- Torque and Loss Optimized Rotor Bar Design for an Induction Machine Using a Nondominated Genetic Algorithm Through Objective Function Modeling. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. 2021
- Winding Function-Based Stator Winding Layout Optimization of a Concentric Winding Squirrel Cage Induction Machine for Torque Enhancement. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society. 2021
- Chemical Reactivity Control of DME/Ethanol Dual Fuel Combustion. SAE Technical Papers. 2021
- Constitutive characterization of an 1800 MPa press hardening steel under hot stamping conditions. IOP Conference Series: Materials Science and Engineering. 012012-012012. 2021
- Friction Characterization of Al-Si Coated Ultra-High Strength Steel under Hot Stamping Conditions. IOP Conference Series: Materials Science and Engineering. 012017-012017. 2021
- Performance of Spark Energy Distribution Strategy on a Production Engine under Lean-Burn Conditions. SAE Technical Papers. 2021
- An Investigation Into OME3 on a High Compression Ratio Engine. ASME 2020 Internal Combustion Engine Division Fall Technical Conference. 2020
- Wear Performances of Gray Cast Iron Brake Rotor with Plasma Electrolytic Aluminating Coating against Different Pads. SAE Technical Papers. 2020
- Utilization of Innovative Materials toward Permanent Magnet Synchronous E-Motors for Traction Application: A Review. 2020 2nd International Conference on Smart Power & Internet Energy Systems (SPIES). 380-385. 2020
- Dual Estimation Strategy for New and Aged Electric Vehicles Batteries. 2020 IEEE Transportation Electrification Conference & Expo (ITEC). 579-583. 2020
- Combustion and Emission Characteristics of SI and HCCI Combustion Fueled with DME and OME. SAE Technical Papers. 2020
- Investigation of Aluminium and Copper Wound PMSM for Direct–drive Electric Vehicle Application. IOP Conference Series: Materials Science and Engineering. 012002-012002. 2019
- Performance Analysis of Non–Oriented Electrical Steel with Optimum Texture for High–Speed Traction Motors. IOP Conference Series: Materials Science and Engineering. 012004-012004. 2019
- Non–Dominated Sorting Genetic Algorithm Based Investigation of Optimal Odd Slot Numbers for Stator Shifted Fractional–Slot Wound PMSMs. 2019 IEEE Energy Conversion Congress and Exposition (ECCE). 3968-3975. 2019
- Comparative Performance Analysis of Copper and Aluminum Wound Fractional–Slot PMSMs for High–Speed Traction Application. 2019 22nd International Conference on Electrical Machines and Systems (ICEMS). 5571-5576. 2019
- Slot–pole Selection for Concentrated Wound Consequent Pole PMSM with Reduced EMF and Inductance Harmonics. 2019 22nd International Conference on Electrical Machines and Systems (ICEMS). 2904-2909. 2019
- Modeling and Analysis of Novel Star-Delta Winding Configuration with Odd Slot Numbers for Reduced Space Harmonics Using Winding Function. 2019 IEEE International Electric Machines & Drives Conference (IEMDC). 1910-1916. 2019
- Preliminary Testing of n-Butanol HCCI on High Compression Ratio Diesel Engines. SAE Technical Papers. 2019
- Tribological Performance of Alternative Die Materials for Trimming of Advanced High Strength Steels. Contributed Papers from MS&T19. 372-379. 2019
- Tribological Performance of Alternative Die Materials for Trimming of Advanced High Strength Steels. Contributed Papers from MS&T19. 372-379. 2019
- Investigation of Phase Angle Displacements in Six-Phase PMSM with Concentrated Windings for Reduced MMF Harmonics. 2018 21st International Conference on Electrical Machines and Systems (ICEMS). 308-313. 2018
- Adagrad Algorithm based Optimal Slot-pole Selection for Reduced Inductance Harmonics in Concentrated Wound Multiphase PMSM. 2018 IEEE International Magnetics Conference (INTERMAG). 2018
- Parameter Determination of PMSM using Coupled Electromagnetic and Thermal Model Incorporating Current Harmonics. 2018 IEEE International Magnetics Conference (INTERMAG). 2018
- Development of Novel Squeeze Cast High Tensile Strength Al–Si–Cu–Ni–Sr Alloys. Minerals, Metals and Materials Series. 763-774. 2018
- Electrolytic Plasma Discharging Treatment of Cast Iron for Friction Reduction. SAE Technical Papers. 2018
- Ion Current Measurement of Diluted Combustion Using a Multi-Electrode Spark Plug. SAE Technical Papers. 2018
- Solidification and Microstructure of Ni-Containing Al-Si-Cu Alloy. IOP Conference Series: Materials Science and Engineering. 012002-012002. 2018
- A novel hybrid approach towards drive-cycle based design and optimization of a fractional slot concentrated winding SPMSM for BEVs. 2017 IEEE Energy Conversion Congress and Exposition (ECCE). 2086-2092. 2017
- Investigation of permanent magnet flux linkage variation in PMSMs due to temperature rise and magnetic saturation. IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society. 2034-2039. 2017
- A novel gray system theory based core loss estimation method for VSI fed induction machines. Canadian Conference on Electrical and Computer Engineering. 2017
- Acoustic noise based permanent magnet flux reduction diagnosis and current compensation in PMSM. 2017 IEEE International Magnetics Conference (INTERMAG). 1-2. 2017
- Correlation method based Bio-composite material temperature estimation utilizing Ultrasound Signals. Canadian Conference on Electrical and Computer Engineering. 2017
- A Feasibility Study of Using DI Butanol as an Ignition Source for Dual-Fuel Combustion. SAE Technical Papers. 2017
- General and Galvanic Corrosion Behavior of Aluminized Ultra-High Strength Steel (UHSS) and Magnesium Alloy AZ35 Altered by Plasma Electrolytic Oxidation Coating Processes. SAE Technical Papers. 2017
- Load and Lubricating Oil Effects on Friction of a PEO Coating at Different Sliding Velocities. SAE Technical Papers. 2017
- Mode Switching to Improve Low Load Efficiency of an Ethanol-Diesel Dual-Fuel Engine. SAE Technical Papers. 2017
- Study of Heat Release Shaping via Dual-Chamber Piston Bowl Design to Improve Ethanol-Diesel Combustion Performance. SAE Technical Papers. 2017
- Intelligent flux predictive control through online stator inter-turn fault detection for fault-tolerant control of induction motor. 2017 IEEE International Conference on Industrial Technology (ICIT). 306-311. 2017
- Automotive prototype from recycled carbon fiber reinforced recycled polyamide composite. Annual Technical Conference - ANTEC, Conference Proceedings. 275-279. 2017
- Ignition Improvement for Ultra-Lean Dilute Gasoline Combustion. SAE Technical Papers. 2017
- 3-D sub-domain analytical model to calculate magnetic flux density in induction machines with semi-closed slots under no-load condition. 2016 IEEE Conference on Electromagnetic Field Computation (CEFC). 1-1. 2016
- Online parameter estimation and loss calculation using duplex neural — Lumped parameter thermal network for faulty induction motor. 2016 IEEE Conference on Electromagnetic Field Computation (CEFC). 2016
- Design approach incorporating MTPA and winding function theories for on-board direct-drive surface PM machines with concentrated windings in EVs. 2016 XXII International Conference on Electrical Machines (ICEM). 1499-1505. 2016
- Investigation of 6-phase surface PM machines with concentrated windings for reduction in space harmonics, leakage inductance and magnet loss in direct-drive EV. 2016 XXII International Conference on Electrical Machines (ICEM). 811-817. 2016
- Reduction of space harmonics in induction machines incorporating rotor bar optimization through a coupled IPSO and 3-D FEA algorithm. 2016 XXII International Conference on Electrical Machines (ICEM). 557-563. 2016
- Response surface methodology based optimization of surface PM machine incorporating stator slotting and PM sizing effects to extend the operating limits for direct-drive EV application. 2016 XXII International Conference on Electrical Machines (ICEM). 2045-2051. 2016
- On-board direct-drive surface permanent magnet synchronous machine with fractional-slot concentrated windings for electric vehicles. Canadian Conference on Electrical and Computer Engineering. 2016
- Heat Release Analysis of Clean Combustion with Ethanol Ignited by Diesel in a High Compression Ratio Engine. SAE Technical Papers. 2016
- 3-D Sub-domain Analytical Model to Calculate Magnetic Flux Density in Induction Machines with Semi-closed Slots under No-Load Condition. IEEE Transactions on Magnetics. 2016
- Fuel Burn Rate Control to Improve Load Capability of Neat n-Butanol Combustion in a Modern Diesel Engine. SAE Technical Papers. 2016
- High Energy Ignition Strategies for Diluted Mixtures via a Three-Pole Igniter. SAE Technical Papers. 2016
- Opportunities and challenges of natural gas as a transportation fuel for a low-carbon economy. Annual Fuels and Lubes Asia Conference and Exhibition. 2016
- The Effect of High-Power Capacitive Spark Discharge on the Ignition and Flame Propagation in a Lean and Diluted Cylinder Charge. SAE Technical Papers. 2016
- Suitability Study of n-Butanol for Enabling PCCI and HCCI and RCCI Combustion on a High Compression-ratio Diesel Engine. SAE Technical Papers. 2015
- Corrosion of Permanent Mold Cast Magnesium Alloy AJ62 in Automotive Environments. Advances in Physics Research. 20-25. 2015
- Estimation of Heat Transfer Coefficient in Squeeze Casting of Wrought Aluminum Alloy 7075 by the Polynomial Curve Fitting Method. Light Metals. 257-261. 2015
- Characterization of natural fibre-reinforced composites with advanced ultrasonic techniques. IEEE International Ultrasonics Symposium, IUS. 1428-1431. 2014
- Battery management system in the Bayesian paradigm: Part I: SOC estimation. 2014 IEEE TRANSPORTATION ELECTRIFICATION CONFERENCE AND EXPO (ITEC). 2014
- Battery Management System in the Bayesian Paradigm: Part I: SOC Estimation. 2014 IEEE TRANSPORTATION ELECTRIFICATION CONFERENCE AND EXPO (ITEC). 2014
- IMPLEMENTATION CHALLENGES AND SOLUTIONS FOR HOMOGENOUS CHARGE COMPRESSION IGNITION COMBUSTION IN DIESEL ENGINES. Journal of Engineering for Gas Turbines and Power. 2014
- Switched-Capacitor Cell Balancing: A Fresh Perspective. SAE Technical Papers. 2014
- Preliminary Investigation of Direct Injection Neat n-Butanol in a Diesel Engine. Volume 1: Large Bore Engines; Advanced Combustion; Emissions Control Systems; Instrumentation, Controls, and Hybrids. 2013
- Steady State Engine Test Demonstration of Performance Improvement With an Advanced Turbocharger. Volume 5A: Industrial and Cogeneration; Manufacturing Materials and Metallurgy; Marine; Microturbines, Turbochargers, and Small Turbomachines. 2013
- Adaptive temperature monitoring for battery thermal management. 2013 IEEE Transportation Electrification Conference and Expo (ITEC). 2013
- Li-Ion Battery SoC Estimation Using a Bayesian Tracker. SAE Technical Papers. 2013
- A control strategy analysis for clean and efficient combustion in compression ignition engines. Proceedings of the 8th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2012. 251-256. 2012
- The impact of fuels and fuelling strategy on enabling of clean combustion in a diesel engine. Proceedings of the 8th International Conference on Modeling and Diagnostics for Advanced Engine Systems, COMODIA 2012. 329-336. 2012
- An Enabling Study of Low Temperature Combustion With Ethanol in a Diesel Engine. ASME 2012 Internal Combustion Engine Division Fall Technical Conference. 217-+. 2012
- Effects of Intake Air Humidity on the NOX Emissions and Performance of a Light-Duty Diesel Engine. ASME 2012 Internal Combustion Engine Division Fall Technical Conference. 235-+. 2012
- A comparative study of Li-ion battery models and nonlinear dual estimation strategies. 2012 IEEE Transportation Electrification Conference and Expo (ITEC). 1-8. 2012
- A signal-based fault detection and classification strategy with application to an internal combustion engine. 2012 IEEE Transportation Electrification Conference and Expo (ITEC). 1-7. 2012
- Diesel EGR Cooler Fouling at Freeway Cruise. SAE Technical Papers. 2009
- Low Temperature Combustion of Neat Biodiesel Fuel on a Common-rail Diesel Engine. SAE Technical Papers. 2008
- An Investigation of EGR Treatment on the Emission and Operating Characteristics of Modern Diesel Engines. SAE Technical Papers. 2007
- Neat Biodiesel Fuel Engine Tests and Preliminary Modelling. SAE Technical Papers. 2007
- Multivariate Knock Detection for Development and Production Applications. Transportation: Transportation and Environment. 1-9. 2004
- Development and Applications of Engine Dynamic Signal Monitoring and Diagnostic System. PROCEEDINGS OF THE 13TH INTERNATIONAL MODAL ANALYSIS CONFERENCE, VOLS 1 AND 2. 1081-1085. 1995
- Monitor engine condition via vibration signals. Proceedings of SPIE - The International Society for Optical Engineering. 1252-1258. 1993
- APPLICATION OF VIBRATION MONITORING TO HIGH VOLUME, MULTISTATION TRANSFER MACHINES.. Proceedings of the International Modal Analysis Conference & Exhibit. 915-919. 1985
- REDUCTION OF STRUCTURE-BORNE NOISE THROUGH THE COMBINED APPLICATION OF MODAL AND SIGNATURE ANALYSIS TECHNIQUES.. Proceedings of the International Modal Analysis Conference & Exhibit. 660-664. 1985
- Alumina-coated Brake Discs with Intention for Reduced Non-exhaust Emission and Increased Ride Comfort of Electrical Vehicles. EuroBrake 2021 Technical Programme.
- Combustion Stability Improvement via Multiple Ignition Sites on a Production Engine. SAE Technical Papers.
-
journal articles
- Anisotropically layered 2D-3D biocarbon-carbon functionality in sustainable high-performance composite for bipolar plates in fuel cell. Renewable Energy. 224:120155-120155. 2024
- Improved Winding Function Based Model for Analytical Estimation of Stray Load Loss in Traction Induction Machines. IEEE Journal of Emerging and Selected Topics in Industrial Electronics. 5:617-627. 2024
- Magnetic Field-Based Induction Machine Modeling Incorporating Space and Time Harmonic Effects. IEEE Access. 12:41579-41589. 2024
- Enhancing performance of advanced fuel cell design with functional energy materials and process. Journal of Materials Research and Technology. 26:1723-1735. 2023
- Combustion control of DME HCCI using charge dilution and spark assistance. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 237:1959-1974. 2023
- State and future implementation perspectives of porous carbon-based hybridized matrices for lithium sulfur battery. Coordination Chemistry Reviews. 481:215055-215055. 2023
- Electromagnetic Performance Prediction of an Induction Machine Using an Improved Permeance-Based Equivalent Circuit Model Considering the Frequency and B–H Curve Dependent Core Loss Branches. IEEE Transactions on Industry Applications. 59:1283-1294. 2023
- Energy efficiency improvements and CO2 emission reduction by CNG use in medium- and heavy-duty spark-ignition engines. Energy. 263:125769-125769. 2023
- Design and fabrication of low-cost renewable carbon electrode materials and their thermo-kinetics for sustainable energy storage applications. Materials Today Sustainability. 20:100245-100245. 2022
- Hydrothermally carbonized xylem sap for use in chemosensors, on and off switches, and memory devices. Energy Reports. 8:3213-3220. 2022
- Cold-Sprayed Multilayer Thermal Barrier–Catalytic Coatings for Engine Pistons: Coatings Design and Properties. Coatings. 12:1332-1332. 2022
- Electrical and Optical Characterization Methodologies for Advanced Spark Ignition. Journal of Offshore Mechanics and Arctic Engineering. 144. 2022
- 3D printing of polyphenylene sulfide for functional lightweight automotive component manufacturing through enhancing interlayer bonding. Additive Manufacturing. 56:102780-102780. 2022
- Decoupled Estimation Scheme for PMSMs Toward Accurate Inductance Modeling. IEEE Transactions on Magnetics. 58:1-5. 2022
- Neural Network Soft Sensors for Gasoline Engine Exhaust Emission Estimation. Journal of Offshore Mechanics and Arctic Engineering. 144. 2022
- Winding Function-Based Analytical Modeling of Core Loss in an Induction Machine Considering Slotting Effects and the Frequency-Dependent B-H Curve Characteristics. IEEE Transactions on Magnetics. 58:1-6. 2022
- Molecular design and structural optimization of nanocellulose-based films fabricated via regioselective functionalization for flexible electronics. Chemical Engineering Journal. 440:135950-135950. 2022
- Surface free energy study of virgin and recycled carbon fiber reinforced thermoplastic composites. Journal of Polymer Research. 29. 2022
- Coupled Magnetic Circuit-Based Design of an IPMSM for Reduction of Circulating Currents in Asymmetrical Star–Delta Windings. IEEE Transactions on Transportation Electrification. 8:2971-2984. 2022
- Low-Carbon Materials: Genesis, Thoughts, Case Study, and Perspectives. Circular Economy and Sustainability. 2:649-664. 2022
- Mechanical performance of modified Polypropylene/Polyamide matrix reinforced with treated recycled carbon fibers for lightweight applications. Journal of Polymer Research. 29. 2022
- Prediction of greenhouse gas emissions reductions via machine learning algorithms: Toward an artificial intelligence-based life cycle assessment for automotive lightweighting. Sustainable Materials and Technologies. 31:e00370-e00370. 2022
- An optical investigation into the reactive fuel spray of high-pressure DME and Ethanol. The Proceedings of the International symposium on diagnostics and modeling of combustion in internal combustion engines. 2022.10:C1-4. 2022
- Fault Detection and Diagnosis of Engine Spark Plugs Using Deep Learning Techniques. SAE International Journal of Engines. 15:515-525. 2022
- Sliding and impact induced damage on industrial-scale D2 die inserts during trimming of advanced high strength steel using optical interferometry. Wear. 488-489:204143-204143. 2022
- Intelligent Detection and Real-time Monitoring of Engine Oil Aeration Using a Machine Learning Model. Applied Artificial Intelligence. 35:1869-1886. 2021
- Regioselective Protection and Deprotection of Nanocellulose Molecular Design Architecture: Robust Platform for Multifunctional Applications. Biomacromolecules. 22:4980-4987. 2021
- Adaptive Smooth Variable Structure Filter Strategy for State Estimation of Electric Vehicle Batteries. Energies. 14:8560-8560. 2021
- Fourier-Based Modeling of an Induction Machine Considering the Finite Permeability and Nonlinear Magnetic Properties. IEEE transactions on energy conversion. 36:3427-3437. 2021
- Catalytically transformed low energy intensive 2D-layered and single crystal-graphitic renewable carbon cathode conductors. Carbon. 183:243-250. 2021
- Multireference Frame Based Open-Phase Fault Modeling and Control for Asymmetrical Six-Phase Interior Permanent Magnet Motors. IEEE transactions on power electronics. 36:11712-11725. 2021
- A Novel Method for Approximating Object Location Error in Bounding Box Detection Algorithms Using a Monocular Camera. IEEE Transactions on Vehicular Technology. 70:8682-8691. 2021
- Thermoconformational Behavior of Cellulose Nanofiber Films as a Device Substrate and Their Superior Flexibility and Durability to Glass. ACS Applied Materials & Interfaces. 13:40853-40862. 2021
- An Investigation Into OME3 on a High Compression Ratio Engine 2021
- Multifunctional nanolayered renewable carbon for electromagnetic interference and energy devices. Materials Today Energy. 20:100778-100778. 2021
- One-pot fabrication of flexible and luminescent nanofilm by in-situ radical polymerization of vinyl carbazole on nanofibrillated cellulose. Carbohydrate Polymers. 262:117934-117934. 2021
- Expanded and nano-structured carbonaceous graphite for high performance anisotropic fuel cell polymer composites. Composites Science And Technology. 207:108654-108654. 2021
- Clean manufacturing of nanocellulose-reinforced hydrophobic flexible substrates. Journal of Cleaner Production. 293:126141-126141. 2021
- Cross-country analysis of life cycle assessment–based greenhouse gas emissions for automotive parts: Evaluation of coefficient of country. Renewable and Sustainable Energy Reviews. 138:110546-110546. 2021
- Recent advances and future perspectives of carbon materials for fuel cell. Renewable and Sustainable Energy Reviews. 138:110535-110535. 2021
- Residual stress, microstructure, and mechanical properties analysis of HPDC aluminum engine block with cast-in iron liners. Materials Today Communications. 26:101814-101814. 2021
- Benign species-tuned biomass carbonization to nano-layered graphite for EMI filtering and greener energy storage functions. Renewable Energy. 164:1039-1051. 2021
- Facile fabrication of electrically conductive graphitic cellufoil for lighting and energy devices. Composites Part B: Engineering. 207:108593-108593. 2021
- Torque Performance Enhancement in Consequent Pole PMSM Based on Magnet Pole Shape Optimization for Direct-Drive EV. IEEE Transactions on Magnetics. 57:1-7. 2021
- Cellulose nanofiber thin-films as transparent and durable flexible substrates for electronic devices. Materials and Design. 197:109274-109274. 2021
- Empirical investigation and control-oriented modeling of n-butanol HCCI for improving combustion controllability. Fuel. 280:118551-118551. 2020
- Functionally tuned nanolayered graphene as reinforcement of polyethylene nanocomposites for lightweight transportation industry. Carbon. 169:99-110. 2020
- Anodic plasma electrolytic deposition of composite coating on ferrous alloys with low thermal conductivity and high adhesion strength. Surface and Coatings Technology. 398:126081-126081. 2020
- Impact of Reduced Graphene Oxide on structure and properties of polyethylene rich binary systems for performance-based applications. Polymer. 202:122622-122622. 2020
- Non-Isothermal Crystallization Behavior and Thermal Properties of Polyethylene Tuned by Polypropylene and Reinforced with Reduced Graphene Oxide. Nanomaterials. 10:1428-1428. 2020
- Wear mechanism evolution on brake discs for reduced wear and particulate emissions. Wear. 452-453:203283-203283. 2020
- Advanced Applications for Lignin Micro- and Nano-based Materials. Current Forestry Reports. 6:159-171. 2020
- Novel functional graphene and its thermodynamic interfacial localization in biphasic polyolefin systems for advanced lightweight applications. Composites Science And Technology. 188:107958-107958. 2020
- Percolation Model for Renewable-Carbon Doped Functional Composites in Packaging Application: A Brief Review. Coatings. 10:193-193. 2020
- A Study on Extreme Learning Machine for Gasoline Engine Torque Prediction. IEEE Access. 8:104762-104774. 2020
- Continuous foam extrusion of polyvinylidene fluoride (PVDF): Chemical microfoam formation. Advanced Industrial and Engineering Polymer Research. 3:36-45. 2020
- Current State of Applications of Nanocellulose in Flexible Energy and Electronic Devices. Frontiers in Chemistry. 8:420. 2020
- Study of an innovative three-pole igniter to improve efficiency and stability of gasoline combustion under charge dilution conditions. Applied Energy. 257:113999-113999. 2020
- Advanced Design Optimization Technique for Torque Profile Improvement in Six-Phase PMSM Using Supervised Machine Learning for Direct-Drive EV. IEEE transactions on energy conversion. 34:2041-2051. 2019
- Open-Phase Fault Modeling and Optimized Fault-Tolerant Control of Dual Three-Phase Permanent Magnet Synchronous Machines. IEEE transactions on power electronics. 34:11116-11127. 2019
- Cellulose-based Antimicrobial Composites and Applications: A Brief Review. Paper and Biomaterials. 4:1-14. 2019
- Effects of electrolytic jet plasma oxidation (EJPO) coatings on thermal behavior of engine cylinders. Heat and Mass Transfer/Waerme- und Stoffuebertragung. 55:2503-2515. 2019
- Exploring the Phase Angle of Measured Speed Harmonic for Efficient Permanent Magnet Temperature Estimation of PMSMs. IEEE transactions on energy conversion. 34:1475-1484. 2019
- Material characterization of recycled and virgin carbon fibers for transportation composites lightweighting. Materials Today Sustainability. 5:100011-100011. 2019
- Future Perspectives and Review on Organic Carbon Dots in Electronic Applications. ACS Nano. 13:6224-6255. 2019
- Multiple Reference Frame-Based Extended Concentrated Wound PMSM Model Considering PM Flux Linkage and Inductance Harmonics. IEEE transactions on energy conversion. 34:731-740. 2019
- Porous graphitic biocarbon and reclaimed carbon fiber derived environmentally benign lightweight composites. Science of the Total Environment. 664:363-373. 2019
- The effect of lightweighting on greenhouse gas emissions and life cycle energy for automotive composite parts. Clean Technologies and Environmental Policy. 21:625-636. 2019
- A New Eco-friendly Anticorrosion Strategy for Ferrous Metals: Plasma Electrolytic Aluminating. ACS Sustainable Chemistry & Engineering. 7:5524-5531. 2019
- Porous Ni3(PO4)2 thin film as a binder-free and low-cost anode of a high-capacity lithium-ion battery. Journal of Electroanalytical Chemistry. 835:81-85. 2019
- Design and Optimization of Traction IPMSM With Asymmetrical Damper Bars for Integrated Charging Capability Using Evolutionary Algorithm. IEEE transactions on energy conversion. 33:2060-2069. 2018
- Maximum Efficiency Control of PMSM Drives Considering System Losses Using Gradient Descent Algorithm Based on DC Power Measurement. IEEE transactions on energy conversion. 33:2240-2249. 2018
- Noninvasive Kalman Filter Based Permanent Magnet Temperature Estimation for Permanent Magnet Synchronous Machines. IEEE transactions on power electronics. 33:10673-10682. 2018
- Direct Calculation of Maximum-Torque-Per-Ampere Angle for Interior PMSM Control Using Measured Speed Harmonic. IEEE transactions on power electronics. 33:9744-9752. 2018
- Parameter Determination of PMSM Using Coupled Electromagnetic and Thermal Model Incorporating Current Harmonics. IEEE Transactions on Magnetics. 54:1-5. 2018
- Renewable Cr2O3 Nanolayer on Cr(W)N Surface for Seizure Prevention at Elevated Temperatures. ACS Applied Materials & Interfaces. 10:25787-25793. 2018
- The effect of tannic acids on the electrical conductivity of PEDOT:PSS Films. Applied Surface Science. 448:583-588. 2018
- Effect of Ni addition on tensile properties of squeeze cast Al alloy A380. Advances in Materials and Processing Technologies. 4:200-209. 2018
- Maximum Torque Per Ampere Control for IPMSM Using Gradient Descent Algorithm Based on Measured Speed Harmonics. IEEE Transactions on Industrial Informatics. 14:1424-1435. 2018
- Thermal and Dimensional Stability of Injection-Molded Sisal-Glass Fiber Hybrid PP Biocomposites. Journal of Polymers and the Environment. 26:1279-1289. 2018
- A novel MTPA theory based bottom-up approach towards parametric and structural design of interior PMSM for electric vehicles. International Transactions on Electrical Energy Systems. 28:e2489-e2489. 2018
- A comparative life cycle assessment based evaluation of greenhouse gas emission and social study: natural fibre versus glass fibre reinforced plastic automotive parts. International Journal of Global Warming. 15:350-350. 2018
- DNN-Based Predictive Magnetic Flux Reference for Harmonic Compensation Control in Magnetically Unbalanced Induction Motor. IEEE Transactions on Magnetics. 53:1-7. 2017
- Permeability and mechanical property correlation of bio based epoxy reinforced with unidirectional sisal fiber mat through vacuum infusion molding technique. Polymer Composites. 38:2192-2200. 2017
- Design of As-Cast High Strength Al-Si-Cu-Ni-Sr Alloys Using the Taguchi Method. SAE Technical Papers. 2017-September. 2017
- Effect of Alkyl Phenol from Cashew Nutshell Liquid and Sisal Fiber Reinforcement on Dry Sliding Wear Behavior of Epoxy Resin. Journal of Natural Fibers. 14:747-758. 2017
- Numerical and Experimental Validation of Natural Fiber Orientation in Viscous Fluid of Injection Cavity. Journal of Natural Fibers. 14:634-644. 2017
- Corrosion Behaviors of Permanent Mold Cast Mg Alloy AJ62 with Varying Grain Structures in Automotive-Related Environments. Applied Mechanics and Materials. 865:9-14. 2017
- Interfacial heat transfer of squeeze casting of wrought aluminum alloy 5083 with variation in wall thicknesses. Advances in Materials and Processing Technologies. 3:407-417. 2017
- Notice of Withdrawal. Advances in Materials and Processing Technologies. 3:362-373. 2017
- Clean combustion of n -butanol as a next generation biofuel for diesel engines. Applied Energy. 198:347-359. 2017
- Life cycle assessment and cost analysis of hybrid fiber-reinforced engine beauty cover in comparison with glass fiber-reinforced counterpart. Environmental Impact Assessment Review. 65:111-117. 2017
- 3-D Sub-Domain Analytical Model to Calculate Magnetic Flux Density in Induction Machines With Semiclosed Slots Under No-Load Condition. IEEE Transactions on Magnetics. 53:1-5. 2017
- Effect of Natural Fiber Network on Permeability and Tensile Strength of Composites through Vacuum Infusion Process. Journal of Natural Fibers. 14:278-286. 2017
- Microstructure and tensile properties of squeeze cast aluminium alloy A380 containing Ni and Sr addition. Advances in Materials and Processing Technologies. 3:90-100. 2017
- Effect of Lithium Chloride on the Fibre Length Distribution, Processing Temperature and the Rheological Properties of High-Yield-Pulp-Fibre-Reinforced Modified Bio-Based Polyamide 11 Composite. Advances in Nanoparticles. 06:48-61. 2017
- Mechanical Properties and Cross-Linking Density of Short Sisal Fiber Reinforced Silicone Composites. BioResources. 12:211-227. 2017
- Sustainable and lightweight biopolyamide hybrid composites for greener auto parts. Canadian Journal of Chemical Engineering. 94:2052-2060. 2016
- Interfacial heat transfer in squeeze casting of magnesium alloy AM60 with variation of applied pressures and casting wall-thicknesses. Heat and Mass Transfer/Waerme- und Stoffuebertragung. 52:2303-2315. 2016
- Biopolyamide hybrid composites for high performance applications. Journal of Applied Polymer Science. 133. 2016
- An engine cycle analysis of diesel-ignited ethanol low-temperature combustion. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 230:1057-1073. 2016
- Cure kinetics characterization of soy‐based epoxy resins for infusion moulding process. Canadian Journal of Chemical Engineering. 94:1375-1380. 2016
- Experimental Investigation of Diesel-Ethanol Premixed Pilot-Assisted Combustion (PPAC) in a High Compression Ratio Engine. SAE International Journal of Engines. 9:1059-1071. 2016
- Artificial neural network training utilizing the smooth variable structure filter estimation strategy. Neural Computing and Applications. 27:537-548. 2016
- Investigation into Mixed and Hydrodynamic Frictions of PEO Coatings and Cast Iron. SAE International Journal of Fuels and Lubricants. 9:23-31. 2016
- Sisal-glass fiber hybrid biocomposite: Optimization of injection molding parameters using Taguchi method for reducing shrinkage. Composites Part A: Applied Science and Manufacturing. 83:152-159. 2016
- Effects of Reaction Parameters on the Glycidyl Etherification of Bark Extractives during Bioepoxy Resin Synthesis. ACS Sustainable Chemistry & Engineering. 4:1016-1024. 2016
- Energy efficiency impact of EGR on organizing clean combustion in diesel engines. Energy Conversion and Management. 112:369-381. 2016
- Emerging Trends in Automotive Lightweighting through Novel Composite Materials. Materials Sciences and Applications. 07:26-38. 2016
- Thermal degradation of extractive-based bio-epoxy monomer and network: Kinetics and mechanism. Journal of Analytical and Applied Pyrolysis. 117:199-213. 2016
- Ethanol-fueled low temperature combustion: A pathway to clean and efficient diesel engine cycles. Applied Energy. 157:838-850. 2015
- Hybrid biocomposites with enhanced thermal and mechanical properties for structural applications. Journal of Applied Polymer Science. 132. 2015
- Implementation Challenges and Solutions for Homogeneous Charge Compression Ignition Combustion in Diesel Engines. Journal of Engineering for Gas Turbines and Power. 137. 2015
- Hybrid biocomposites with enhanced thermal and mechanical properties for structural applications. Journal of Applied Polymer Science. 132. 2015
- Squeeze casting of aluminum alloy A380: Microstructure and tensile behavior. China Foundry. 12:367-374. 2015
- Clean combustion enabling with ethanol on a dual-fuel compression ignition engine. International Journal of Engine Research. 16:639-651. 2015
- Effect of Alkyl Phenol from Cashew Nutshell Liquid on Mechanical and Dry Sliding Wear Behavior of Epoxy Resin. BioResources. 10:4126-4136. 2015
- Studies on permeability of sisal fibre mat during thermoset resin filling in vacuum infusion process. Canadian Journal of Chemical Engineering. 93:1364-1370. 2015
- Model-Based Parameter Identification of Healthy and Aged Li-ion Batteries for Electric Vehicle Applications. SAE International Journal of Alternative Powertrains. 4:233-247. 2015
- Wetting behavior of soy-based resin and unsaturated polyester on surface-modified sisal fiber mat. Journal of Reinforced Plastics and Composites. 34:807-818. 2015
- A Zero-Dimensional Intake Dilution Tracking Algorithm for Real-Time Feedback on Exhaust Gas Recirculation. SAE International Journal of Engines. 8:1856-1865. 2015
- Active Injection Control for Enabling Clean Combustion in Ethanol-Diesel Dual-Fuel Mode. SAE International Journal of Engines. 8:890-902. 2015
- Combustion and Exhaust Gas Speciation Analysis of Diesel and Butanol Post Injection. SAE Technical Papers. 2015. 2015
- Efficiency and Emission Trade-Off in Diesel-Ethanol Low Temperature Combustion Cycles. SAE Technical Papers. 2015. 2015
- Energy Efficiency Comparison between Butanol and Ethanol Combustion with Diesel Ignition. SAE Technical Papers. 2015. 2015
- Impact of Fuelling Techniques on Neat n-Butanol Combustion and Emissions in a Compression Ignition Engine. SAE International Journal of Engines. 8:735-746. 2015
- Surface Effect of a PEO Coating on Friction at Different Sliding Velocities. SAE Technical Papers. 2015. 2015
- Estimation of Heat Transfer Coefficient in Squeeze Casting of Wrought Aluminum Alloy 7075 by the Polynomial Curve Fitting Method. Light Metals. 2015:257-261. 2015
- Automotive Internal-Combustion-Engine Fault Detection and Classification Using Artificial Neural Network Techniques. IEEE Transactions on Vehicular Technology. 64:21-33. 2015
- Evaluation of the Influence of Fibre Aspect Ratio and Fibre Content on the Rheological Characteristic of High Yield Pulp Fibre Reinforced Polyamide 11 “HYP/PA11” Green Composite. Open Journal of Polymer Chemistry. 05:1-8. 2015
- Modeling the Rheological Characteristics of Flexible High-Yield Pulp-Fibre-Reinforced Bio-Based Nylon 11 Bio-Composite. Journal of Encapsulation and Adsorption Sciences. 05:1-10. 2015
- Preliminary Investigation of Direct Injection Neat n-Butanol in a Diesel Engine. Journal of Offshore Mechanics and Arctic Engineering. 137. 2015
- Review of Non-Newtonian Mathematical Models for Rheological Characteristics of Viscoelastic Composites. Green and Sustainable Chemistry. 05:6-14. 2015
- Exhaust gas recirculation – Zero dimensional modelling and characterization for transient diesel combustion control. Energy Conversion and Management. 86:309-324. 2014
- Reduced-Order Electrochemical Model Parameters Identification and SOC Estimation for Healthy and Aged Li-Ion Batteries Part I: Parameterization Model Development for Healthy Batteries. IEEE Journal of Emerging and Selected Topics in Power Electronics. 2:659-677. 2014
- Reduced-Order Electrochemical Model Parameters Identification and State of Charge Estimation for Healthy and Aged Li-Ion Batteries—Part II: Aged Battery Model and State of Charge Estimation. IEEE Journal of Emerging and Selected Topics in Power Electronics. 2:678-690. 2014
- Steady State Engine Test Demonstration of Performance Improvement With an Advanced Turbocharger. Journal of Engineering for Gas Turbines and Power. 136. 2014
- Clean Combustion in a Diesel Engine Using Direct Injection of Neat n-Butanol. SAE Technical Papers. 1. 2014
- Ethanol diesel dual fuel clean combustion with FPGA enabled control. International Journal of Powertrains. 3:242-242. 2014
- Outside-Engine Wear Study of Ceramic Coated Cylinder Wall Tribo-System. SAE Technical Papers. 1. 2014
- Transient Build-up and Effectiveness of Diesel Exhaust Gas Recirculation. SAE International Journal of Engines. 7:172-182. 2014
- An Enabling Study of Low Temperature Combustion With Ethanol in a Diesel Engine. Journal of Offshore Mechanics and Arctic Engineering. 135. 2013
- Wear resistant coatings for engine application. Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. 3:2238-2246. 2013
- Low Temperature Combustion Strategies for Compression Ignition Engines: Operability limits and Challenges. SAE Technical Papers. 2. 2013
- Multi-Coil High Frequency Spark Ignition to Extend Diluted Combustion Limits. Lecture Notes in Electrical Engineering. 189:217-227. 2013
- Renewable Ethanol Use for Enabling High Load Clean Combustion in a Diesel Engine. SAE Technical Papers. 2. 2013
- Empirical Study of Simultaneously Low NOx and Soot Combustion With Diesel and Ethanol Fuels in Diesel Engine. Journal of Engineering for Gas Turbines and Power. 134. 2012
- Friction and counterface wear influenced by surface profiles of plasma electrolytic oxidation coatings on an aluminum A356 alloy. Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films. 30. 2012
- Effects of coating thickness on thermal conductivities of alumina coatings and alumina/aluminum hybrid materials prepared using plasma electrolytic oxidation. Surface and Coatings Technology. 207:96-101. 2012
- Mode Switching Control for Diesel Low Temperature Combustion with Fast Feedback Algorithms. SAE International Journal of Engines. 5:850-863. 2012
- EC1-1 A Control Strategy Analysis for Clean and Efficient Combustion in Compression Ignition Engines(EC: Engine Control,General Session Papers). The Proceedings of the International symposium on diagnostics and modeling of combustion in internal combustion engines. 2012.8:251-256. 2012
- FL2-1 The Impact of Fuels and Fuelling Strategy on Enabling of Clean Combustion in a Diesel Engine(FL: Fuels,General Session Papers). The Proceedings of the International symposium on diagnostics and modeling of combustion in internal combustion engines. 2012.8:329-336. 2012
- Engine Fault Detection Using Vibration Signal Reconstruction in the Crank-Angle Domain. SAE Technical Papers. 1. 2011
- Diesel EGR cooler fouling with Ni-Fe-Cr-Al DPF at Freeway Cruise. SAE Technical Papers. 1. 2010
- An Improvement on Low Temperature Combustion in Neat Biodiesel Engine Cycles. SAE International Journal of Fuels and Lubricants. 1:1120-1132. 2009
- Biodiesel engine performance and emissions in low temperature combustion. Fuel. 87:714-722. 2008
- Ford EEP takes a fresh look at vision. Chilton's I&CS (Instrumentation & Control Systems). 71:49-+. 1998
- Engine dynamic signal monitoring and diagnostics [microform].