selected scholarly activity
-
chapters
- Inverse design of isolated structures using predicted FEMA P-58 decision variables. 1481-1488. 2023
- Simplified Framework for Preliminary Estimates of Bridge Bearing Demands and Fatigue Loading. Lecture Notes in Civil Engineering. 1105-1121. 2023
-
conferences
- Hybrid Simulation of Tall Bridge with Model Updating. 12th National Conference on Earthquake Engineering, NCEE 2022. 2022
- Inverse design of isolated buildings given desired collapse probability via surrogate model. Proceedings of the International Conference on Natural Hazards and Infrastructure. 2022
- Parameterized Logistic Models for Efficient Bridge Maintenance Scheduling. Proceedings of the International Conference on Natural Hazards and Infrastructure. 2022
- Designing for extreme events: Behavior of isolated structures subjected to impact. Proceedings of the International Conference on Natural Hazards and Infrastructure. 2019
- Effects of bridge aging on bridge bearing lifetime demands. Proceedings of the International Conference on Natural Hazards and Infrastructure. 2019
- Prediction of bearing lifetime demands by considering the bridge design and location parameters. 20th Congress of IABSE, New York City 2019: The Evolving Metropolis - Report. 1399-1404. 2019
- Statistical Analysis of Bridge Management System Inspection Data. IABSE Congress, New York, New York 2019: The Evolving Metropolis. 897-901. 2019
- Statistical analysis of bridge management system inspection data. 20th Congress of IABSE, New York City 2019: The Evolving Metropolis - Report. 898-902. 2019
- Collapse in sliding isolated MRFs considering different design methodologies. 11th National Conference on Earthquake Engineering 2018, NCEE 2018: Integrating Science, Engineering, and Policy. 1751-1761. 2018
- Increasing Rotational Capacity of Gusset Plates through Heat Treatment. 6th International Structural Specialty Conference 2018, Held as Part of the Canadian Society for Civil Engineering Annual Conference 2018. 459-468. 2018
- Predicting bridge bearing demands through a probabilstic framework. 6th International Structural Specialty Conference 2018, Held as Part of the Canadian Society for Civil Engineering Annual Conference 2018. 608-616. 2018
- Traditional vs column-top isolation for typical structures. 6th International Structural Specialty Conference 2018, Held as Part of the Canadian Society for Civil Engineering Annual Conference 2018. 860-869. 2018
- Effects of non-traditional isolator placement for Seismic retrofit. Proceedings, Annual Conference - Canadian Society for Civil Engineering. 1720-1728. 2016
- Predicting failure in sliding isolation bearings under long-period motions. Proceedings, Annual Conference - Canadian Society for Civil Engineering. 2527-2536. 2016
- Seismic retrofit of steel frames with minimal-disturbance. IABSE Conference, Nara 2015: Elegance in Structures - Report. 398-399. 2015
- Development of a large scale hybrid shake table and application to testing a friction slider isolated system. NCEE 2014 - 10th U.S. National Conference on Earthquake Engineering: Frontiers of Earthquake Engineering. 2014
- Isolation for tall buildings, a Japanese case study. NCEE 2014 - 10th U.S. National Conference on Earthquake Engineering: Frontiers of Earthquake Engineering. 2014
- Three dimensional modeling of triple friction pendulum isolators. 9th US National and 10th Canadian Conference on Earthquake Engineering 2010, Including Papers from the 4th International Tsunami Symposium. 421-430. 2010
- Comparison of US and Japanese Codes and Practices for Seismically Isolated Buildings. Structures Congress 2010. 2330-2338. 2010
-
journal articles
- Application of model updating to a large‐scale hybrid simulation. Earthquake Engineering and Structural Dynamics. 53:1398-1415. 2024
- Fuzzy-logic framework for updating the seismic fragility of deteriorating bridges via visual inspections. Soil Dynamics and Earthquake Engineering. 173:108105-108105. 2023
- Lumped mass models for use in predicting collapse of an isolated building. Engineering structures. 290:116373-116373. 2023
- Sliding versus Rubber Bearings: Exploring the Difference in Collapse Probability. Journal of Structural Engineering. 149. 2023
- Fuzzy-Logistic Models for Incorporating Epistemic Uncertainty in Bridge Management Decisions. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering. 8. 2022
- Parameterized models for prediction of lifetime bearing demands. Engineering structures. 252:113649-113649. 2022
- Parameterized Logistic Models for Bridge Inspection and Maintenance Scheduling. Journal of Bridge Engineering. 26. 2021
- Stiffness of Rubber Bearings Considering Nonstandard Top and Bottom Boundary Conditions. Journal of Structural Engineering. 147. 2021
- Performance of unscented Kalman filter for model updating with experimental data. Earthquake Engineering and Structural Dynamics. 50:1948-1966. 2021
- Design optimization of triple friction pendulums for high-rise buildings considering both seismic and wind loads. Soil Dynamics and Earthquake Engineering. 142:106568-106568. 2021
- Incorporating Frame Action into Seismic Design of Gusset Plates. Journal of Structural Engineering. 147. 2021
- Evaluating adaptive vertical seismic isolation for equipment in nuclear power plants. Nuclear Engineering and Design. 358:110399-110399. 2020
- Three-dimensional double friction pendulum bearing model including uplift and impact behavior: Formulation and numerical example. Engineering structures. 199:109579-109579. 2019
- Probabilistic Framework for Lifetime Bridge-Bearing Demands. Journal of Bridge Engineering. 24. 2019
- Novel gusset plate design using high strength steel and heat treatment. Journal of Constructional Steel Research. 157:59-69. 2019
- The unexpected surface of asteroid (101955) Bennu. Nature. 568:55-60. 2019
- Effect of Design Methodology on Collapse of Friction Pendulum Isolated Moment-Resisting and Concentrically Braced Frames. Journal of Structural Engineering. 144. 2018
- Inelastic response of base-isolated structures subjected to impact. Engineering structures. 171:86-93. 2018
- To limit forces or displacements: Collapse study of steel frames isolated by sliding bearings with and without restraining rims. Soil Dynamics and Earthquake Engineering. 112:203-214. 2018
- Experimental study of the effect of restraining rim design on the extreme behavior of pendulum sliding bearings. Earthquake Engineering and Structural Dynamics. 47:906-924. 2018
- Extreme behavior in a triple friction pendulum isolated frame. Earthquake Engineering and Structural Dynamics. 46:2683-2698. 2017
- Experimental Investigation of Elastomeric Isolation Bearings with Flexible Supporting Columns. Journal of Structural Engineering. 143. 2017
- Hybrid shake table testing method: Theory, implementation and application to midlevel isolation. Structural Control and Health Monitoring. 24. 2017
- Failure of double friction pendulum bearings under pulse‐type motions. Earthquake Engineering and Structural Dynamics. 46:715-732. 2017
- Minimal‐disturbance seismic rehabilitation of steel moment‐resisting frames using light‐weight steel elements. Earthquake Engineering and Structural Dynamics. 45:383-400. 2016
- Enhanced performance through a dual isolation seismic protection system. Structural Design of Tall and Special Buildings. 25:72-89. 2016
- Application of Isolation to High-Rise Buildings: A Japanese Design Case Study through a U.S. Design Code Lens. Earthquake Spectra. 31:1451-1470. 2015
- Seismic Retrofit of Steel Frames with Minimal-Disturbance. IABSE Conference, Nara 2015: Elegance in structures. 104:1-7. 2015
- LQR control with frequency‐dependent scheduled gain for a semi‐active floor isolation system. Earthquake Engineering and Structural Dynamics. 43:1265-1284. 2014
- A Lesson from the 2011 Tohoku Earthquake – The Necessity for Collaboration and Dialog Among Natural Scientists, Engineers, Social Scientists, Government Agencies, and the General Public. Geotechnical, Geological and Earthquake Engineering. 32:101-116. 2014
- Full‐scale shaking table test of a base‐isolated medical facility subjected to vertical motions. Earthquake Engineering and Structural Dynamics. 42:1931-1949. 2013
- Approximating peak responses in seismically isolated buildings using generalized modal analysis. Earthquake Engineering and Structural Dynamics. 42:1807-1825. 2013
- Effect of support rotation on triple friction pendulum bearing behavior. Earthquake Engineering and Structural Dynamics. 42:1731-1748. 2013
- H ∞ control in the frequency domain for a semi-active floor isolation system. Frontiers of Structural and Civil Engineering. 7:264-275. 2013
- 21277 Comparisons of US and Japanese design codes for displacement demands of tall isolated buildings. 構造II. 553-554. 2013
- 21388 A smart floor isolation system with adaptive semi-active control strategy for short and long period motions. 構造II. 775-776. 2013
- Innovative Technologies Used to Investigate Segments of the Inca Road. Journal of Professional Issues in Engineering Education and Practice. 139:187-195. 2013
- 2028 Predicting floor response spectra in buildings isolated with nonlinear systems. پیشرفتهای حسابداری. 109-112. 2013
- 2029 An advanced semi-active floor isolation system to protect equipment. پیشرفتهای حسابداری. 113-116. 2013
- Correct treatment of rotation of sliding surfaces in a kinematic model of the triple friction pendulum bearing. Earthquake Engineering and Structural Dynamics. 42:311-317. 2013
- Experimental and analytical study of the bi‐directional behavior of the triple friction pendulum isolator. Earthquake Engineering and Structural Dynamics. 41:355-373. 2012