selected scholarly activity
-
academic article
- A study of the carbon distribution in bainitic ferrite. Scripta Materialia Nanostructured Materials. 224:115140-115140. 2023
- Rapid Strengthening of Interstitial Free Steel Using Amorphous FeC Thin Films and Induction Heating. Journal of Materials Engineering and Performance. 31:9303-9317. 2022
- Recent Developments in Medium and High Manganese Steels. Metals. 12:743-743. 2022
- The Influence of Specimen Geometry and Strain Rate on the Portevin-Le Chatelier Effect and Fracture in an Austenitic FeMnC TWIP Steel. Metals. 10:1201-1201. 2020
- Erratum: Pushkareva, I., et al. The Influence of Vanadium Additions on Isothermally Formed Bainite Microstructures in Medium Carbon Steels Containing Retained Austenite. Metals 2020, 10, 392. Metals. 10:565-565. 2020
- The Influence of Vanadium Additions on Isothermally Formed Bainite Microstructures in Medium Carbon Steels Containing Retained Austenite. Metals. 10:392-392. 2020
- Microstructural assessment of 310S stainless steel during creep at 800 °C. Materialia. 6:100330-100330. 2019
- Revealing fracture mechanisms of medium manganese steels with and without delta-ferrite. Acta Materialia Acta Metallurgica et Materialia. 164:683-696. 2019
- New insights into martensite strength and the damage behaviour of dual phase steels. Acta Materialia Acta Metallurgica et Materialia. 159:112-122. 2018
- Structure-properties relationship of ultra-fine grained V-microalloyed dual phase steels. Microscopy and Microanalysis. 24:2232-2233. 2018
- Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 729:496-507. 2018
- The influence of silicon additions on the deformation behavior of austenite-ferrite duplex medium manganese steels. Acta Materialia Acta Metallurgica et Materialia. 148:249-262. 2018
- Kinetics and microstructural change of low-carbon bainite due to vanadium microalloying. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 720:248-256. 2018
- Structure-properties relationship of ultra-fine grained V-microalloyed dual phase steels. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 703:293-303. 2017
- Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel. Scripta Materialia Nanostructured Materials. 133:9-13. 2017
- Critical role of strain partitioning and deformation twinning on cracking phenomenon occurring during cold rolling of two duplex medium manganese steels. Scripta Materialia Nanostructured Materials. 130:49-53. 2017
- Phase Transformation Behavior of Medium Manganese Steels with 3 Wt Pct Aluminum and 3 Wt Pct Silicon During Intercritical Annealing. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Metallurgical Transactions A (Physical Metallurgy and Materials Science). 47:4869-4882. 2016
- Tailoring the mechanical properties of steel sheets using FeC films and diffusion annealing. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 657:291-298. 2016
- 2015 T.C. Graham prize winner: High-strength interstitial-free steel obtained using FeC amorphous films and induction heating for packaging applications and cladding with lighter metals for car body panels. Iron and Steel Technology. 13:112-116. 2016
- Towards the microstructure design of DP steels: A generic size-sensitive mean-field mechanical model. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 637:222-234. 2015
- On the direct nucleation and growth of ferrite and cementite without austenite. Scripta Materialia Nanostructured Materials. 95:35-38. 2015
- Role of copper and aluminum on the corrosion behavior of austenitic Fe–Mn–C TWIP steels in aqueous solutions and the related hydrogen absorption. Corrosion Science. 83:234-244. 2014
- Role of copper and aluminum additions on the hydrogen embrittlement susceptibility of austenitic Fe–Mn–C TWIP steels. Corrosion Science. 82:218-226. 2014
- Mechanical behavior of recrystallized Zircaloy-4 under monotonic loading at room temperature: Tests and simplified anisotropic modeling. Journal of Nuclear Materials. 447:94-106. 2014
- Growth of “moth‐eye” ZnO nanostructures on Si(111), c‐Al 2 O 3 , ZnO and steel substrates by pulsed laser deposition. Physica Status Solidi (C) Current Topics in Solid State Physics. 10:1317-1321. 2013
- Distribution of Carbon in Martensite During Quenching and Tempering of Dual Phase Steels and Consequences for Damage Properties. ISIJ International. 53:1215-1223. 2013
- Supersaturated α-iron in vapour-deposited Fe–C thin films. Journal of Materials Science Interface Science Journal of Materials Science Letters. 47:6939-6947. 2012
- Interactions between deformation-induced defects and carbides in a vanadium-containing TWIP steel. Scripta Materialia Nanostructured Materials. 66:1018-1023. 2012
- Hydrogen trapping by VC precipitates and structural defects in a high strength Fe–Mn–C steel studied by small-angle neutron scattering. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 536:110-116. 2012
- Amorphous Fe1−xCx coatings as carbon reservoirs for diffusion strengthening of steel sheets. Scripta Materialia Nanostructured Materials. 65:763-766. 2011
- High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships. Current Opinion in Solid State and Materials Science. 15:141-168. 2011
- Precipitation strengthening in high manganese austenitic TWIP steels. Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques International Journal of Materials Research. 102:538-549. 2011
- Alloy design of graded Zn-Cr PVD coatings for corrosion protection of cold formed automotive parts. Revue de Metallurgie. Cahiers D'Informations Techniques. 107:457-467. 2010
- Nanostructured steel with high work-hardening by the exploitation of the thermal stability of mechanically induced twins. Scripta Materialia Nanostructured Materials. 60:714-716. 2009
- The influence of plastic instabilities on the mechanical properties of a high-manganese austenitic FeMnC steel. Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques International Journal of Materials Research. 99:734-738. 2008
- Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels. Scripta Materialia Nanostructured Materials. 58:484-487. 2008
- A study of the carbon distribution in retained austenite. Scripta Materialia Nanostructured Materials. 56:489-492. 2007
- Vanadium Precipitation During Intercritical Annealing in Cold Rolled TRIP Steels. ISIJ International. 47:1168-1177. 2007
- Applying the latest microscopy techniques to study phase transformations at rail surfaces. Revue de Metallurgie. Cahiers D'Informations Techniques. 103:458-464. 2006
- EELS study of niobium carbo-nitride nano-precipitates in ferrite. Micron. 37:492-502. 2006
- The development of a new Fe-Mn-C austenitic steel for automotive applications. Revue de Metallurgie. Cahiers D'Informations Techniques. 103:293-302. 2006
- Structural evolution of co-deposited Zn–Cr coatings produced by vacuum evaporation. Thin Solid Films. 436:232-237. 2003
- Quantitative analysis of complex carbo-nitride precipitates in steels. Scripta Materialia Nanostructured Materials. 47:845-849. 2002
- TEM cross-section preparation with minimal ion milling time. Journal of Microscopy. 182:186-191. 1996
- A quadrupole lens system for use in a parallel recording system for Electron Energy Loss Spectroscopy. Ultramicroscopy. 28:126-130. 1989
- Electron detection in the analytical electron microscope. Ultramicroscopy. 28:108-117. 1989
-
chapter
-
conference paper
- Microstructure Modelling of the HEC Behaviour of a Novel Vanadium DP980 Cold Rolled Alloy. Minerals, Metals and Materials Series. 909-920. 2022
- Coupling Metallurgy and Manufacturing Parameters of Pipeline Fittings to Avoid Substandard Properties. Volume 3: Operations, Monitoring and Maintenance; Materials and Joining. 2018
- Challenges with design and processing of carbide-free bainitic AHSS sheets. International Symposium on New Developments in Advanced High-Strength Sheet Steels. 135-145. 2017
- Properties of ultrafine-grained V-microalloyed dual-phase steels. International Symposium on New Developments in Advanced High-Strength Sheet Steels. 51-62. 2017
- Austenite decomposition and properties of Mo-Nb containing press hardening steels. PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. 1103-1104. 2015
- On the decomposition of annealed amorphous Fe-C thin films. PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. 83-84. 2015
- The contribution of TEM-EELS to understanding the behaviour of carbon in the Fe-C system. PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. 1181-1182. 2015
- Functionally graded material: Carbon gradient on IF steel. Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. 185-191. 2013
- Hydride reorientation in M5® cladding and its impact on mechanical properties. LWR Fuel Performance Meeting, Top Fuel 2013. 879-886. 2013
- SIMS Analysis of Deuterium Absorption and Diffusion in Austenitic Fe-Mn-C Steels. Defect and Diffusion Forum. 477-483. 2012
- Damage of TWIP steels for automotive application - ICF 12, Ottawa, Canada, 2009. 12th International Conference on Fracture 2009, ICF-12. 5875-5884. 2009
- Study of the deformation mechanisms of TWIP steels (Fe-Mn-C) by X-Ray diffraction. Advanced Materials Research. 822-827. 2007
- The Deformation Mechanisms of TWIP Steels (Fe-Mn-C) Viewed by X-Ray Diffraction. Diffusion and Defect Data Pt.B: Solid State Phenomena Solid State Phenomena. 53-56. 2007
- The Deformation Mechanisms of TWIP Steels (Fe-Mn-C) Viewed by X-Ray Diffraction. Diffusion and Defect Data Pt.B: Solid State Phenomena Solid State Phenomena. 53-56. 2007
- The development of a new Fe-Mn-C austenitic steel for automotive applications. Materials Science and Technology. 127-138. 2005
- Characterisation of Niobium Carbide and Carbonitride Evolution within Ferrite: Contribution of Transmission Electron Microscopy and Advanced Associated Techniques. Journal of Metastable and Nanocrystalline Materials. 669-676. 2005
- Characterization of Strain Induced Precipitation of Nb in Microalloyed Austenite Using Classical and Novel Techniques. Journal of Metastable and Nanocrystalline Materials. 677-686. 2005
- Microalloying with vanadium in TRIP steels. International Conference on Advanced High Strength Sheet Steels for Automotive Applications - Proceedings. 181-193. 2004
- Advances in the characterisation of multilayered coatings using electron energy loss spectroscopy in the transmission electron microscope. Surface and Coatings Technology. 217-224. 1998
- Background modelling in electron energy loss spectroscopy. Institute of Physics Conference Series. 105-108. 1991