Direct Calculation of Maximum-Torque-Per-Ampere Angle for Interior PMSM Control Using Measured Speed Harmonic

This paper explores the use of speed harmonic for accurate and fast maximum-torque-per-ampere (MTPA) control of interior permanent magnet synchronous machines (IPMSMs). A novel MTPA angle calculation approach is proposed, in which the MTPA angle is directly calculated from the phase angle of the speed harmonic that is induced by an injected harmonic current. At first, the relation between the speed harmonic and machine parameters is derived from the IPMSM model, which shows that the phase angle of the induced speed harmonic can be utilized to cancel the machine parameters in existing MTPA equation. Thus, a new MTPA equation is derived, which does not involve machine parameters for MTPA angle calculation. Compared with existing methods, the proposed approach is independent from the machine and drive nonlinearities. Moreover, the MTPA angle is directly calculated from the derived MTPA equation, so the proposed approach is fast and computationally efficient. Thus, the proposed approach is suitable for both on-line applications and building off-line lookup tables of MTPA angles for IPMSMs. The proposed approach is experimentally evaluated on a laboratory IPMSM drive system.