Experimental Performance of Steel Beams under Blast Loading

In this study, the dynamic response of typical wide-flange steel beams was experimentally evaluated under blast loading. A total of 13 beams were field tested using live explosives, where the charge size ranged from 50 to 250 kg of ammonium nitrate-fuel oil mixture, and the ground stand-off distance was from 7.0 to 10.3 m. Blast wave characteristics, including incident and reflected pressures, were recorded. In addition, time-dependent displacements, accelerations, and strains at different locations along the steel members were measured, and the postblast damage and mode of failure of the test specimens were observed. The blast load characteristics were compared with those obtained using the Technical Manual UFC 3-340-02 results. The displacement response results were used to validate the results obtained from a nonlinear dynamic analysis based on a single degree-of-freedom (SDOF) model. Results showed that the UFC 3-340-02 pressure predictions compare reasonably well with the measured pressure in the positive phase in terms of both the peak pressure and overall time variations. The SDOF model predicted the maximum displacements of beams in the elastic range reasonably well, but it overestimated them in the plastic range.