publication venue for
- Comparative assessment of various random parameter ordered models: A comprehensive evaluation of work zone collision injury-severities 2019
- Comparison among project delivery methods for scattered rehabilitation projects 2019
- Conceptual design of road and bridge substructure in northern Canada with considerations for constructability and climate change 2019
- Development of a multistage mobile system for oily wastewater treatment 2019
- Development of a municipal solid waste management model from the persective under uncertainty 2019
- Energy-related economic modeling to support the environmental policy-making, case study of the province of Saskatchewan 2019
- Evaluating pavement support alternatives for precast concrete inlay panels 2019
- Fabrication of nano particles modified cellulose biomass for oil-water separation 2019
- High-resolution projections of temperature changes over China 2019
- Implementing unsupervised machine learning to gain a better understanding of the asphalt pavement conditions of Ontario provincial highways 2019
- Incorporating infrared heating technology in crack repair operations for airport runways and taxiways 2019
- Influence of coarse recycled concrete aggregate on the indirect tensile strength of hot mix asphalt 2019
- Life cycle cost analysis of perpetual runway pavements; Canadian perspective 2019
- Measuring effective damping of full-scale structure-TMD and TSD systems 2019
- Preliminary study of dynamic simulation for aircraft tire and asphalt pavement using ABAQUS 2019
- Relationships between free and water-soluble chloride concentrations in concrete 2019
- Research on uniformity detection method of asphalt mixture during paving process based on digital image technology 2019
- Self-healing concrete: A critical review 2019
- Soil remediation by biochar derived from agricultural waste 2019
- Treatment of produced water using microfiltration membrane modified by nano particles 2019
- A stochastic modeling approach for risk management of water resources systems 2017
- The effect of the silo-storage on the rheological behavior of a surface course asphalt mix containing Reclaimed Asphalt Pavement (RAP) 2017
- A methodology for integrating asset valuation in transportation asset management 2016
- Coloured asphalt bus rapid transit lanes in the regional municipality of York: Integrating laboratory performance testing into sustainable pavement asset management 2016
- Development of a Novel Replaceable Connection for Seismically Designed Steel Concentrically Braced Frames 2016
- EVALUATION OF THE CONTRIBUTION OF PANEL ZONES TO THE GLOBAL PERFORMANCE OF MOMENT RESISTING FRAMES UNDER SEISMIC LOAD 2016
- Effects of non-traditional isolator placement for Seismic retrofit 2016
- Employing Unmanned Aerial Vehicles (UAV) to Enhance building Roof Inspection Practices: A Case Study 2016
- Foam glass lightweight aggregate: The new approach 2016
- Footfall-induced vibration: Prediction and control strategies 2016
- Fragility of low-rise controlled rocking steel braced frames with different base rocking joints 2016
- Impact of slenderness on the seismic response of rocking frames in ontario nuclear power plants 2016
- Investigation of stable and unstable fiber-reinforced elastomeric isolators 2016
- Numerical Modelling of Reinforced Concrete Block Structural Wall Buildings under Seismic 2016
- Predicting failure in sliding isolation bearings under long-period motions 2016
- Repairing high volume HMA highways with precast concrete inlay panels 2016
- Surfactant-modified biomass adsorbents for enhanced removal of pollutants from aqueous solution 2016
- The effect of temperature on the lateral response of unbonded fiber-reinforced elastomeric isolators 2016
- The heat loads of a tuned mass damper 2016
- A practical approach to capacity design of controlled rocking steel braced frames 2015
- Brewery wastewater treatment by anaerobic membrane bioreactor 2015
- Criteria for the evaluation of life cycle assessment software packages with application to concrete 2015
- Solar thermal buffer zone modelling: Experimental and numerical results 2015
- Effectiveness of blast walls designed for blast shielding 2013
- Evaluation of stiffness to predict fatigue life of hot-mix asphalt - A Canadian case study 2013
- Finite element modelling of a TLD with inclined damping screens 2013
- Gis-based resource integrated progress tracking for construction projects using spatio-temporal data 2013
- Investigation of the Shear Behaviour of Unbonded Fiber Reinforced Elastomeric Isolators (FREIs) with Modified Support Geometry 2013
- Microsimulation-based impact assessment of the Vehicle-to-Vehicle (V2V) system for work zone safety 2013
- Sliding Response Analysis of Operational and Functional Components (OFC) in Seismically Isolated Buildings 2013
- Strain rate effect on development length of steel reinforcement 2013
- Three dimensional analysis of a high-rise building equipped with multiple tuned liquid dampers using wind tunnel loads 2013
- Three-Dimensional Finite Element Analysis of Square Fiber-Reinforced Elastomeric Isolators (FREIs) under Lateral Loads 2013
- Construction work zone Traffic Management using Connected Vehicle Systems 2012
- Developing innovative roads using solar technologies 2012
- Development and validation of a three dimensional finite element structure-tuned liquid damper model system 2012
- Evaluating pavement performance for network level pavement management: Provincial/state vs. municipal, what is the difference? 2012
- Perpetual pavement designs: The sustainable alternative for highway design 2012
- Retrofit of structural steel columns using FRP-concrete composite systems 2012
- Seismic qualification of structures, systems and components in a Canadian nuclear power plant 2012
- Selection of automated data collection technologies using multi criteria decision making approach for pavement management systems 2012
- Sustainable urban pavement management framework: A Chilean case study 2012
- Vertical Response Behaviour of Stable Unbonded Fiber Reinforced Elastomeric Isolators (SU-FREIs) with Holes in the Loaded Surface. 2012
- 3rd International/9th construction specialty conference 2011
- Biosurfactant-enhanced removal of petroleum hydrocarbons in a soil bioremediation system 2011
- Go/No-Go decisions for BOT projects 2011
- Improving the energy efficiency of buildings with hollow core slabs: A numerical investigation 2011
- Production simulation for prefab housing facilities 2011
- The evolution of public-private partnerships in public school construction: North Toronto Collegiate Institute 2011
- Work zone throughput models for Southern Ontario 2011
- Application of Taguchi experimental design for investigating surfactant enhanced bioremediation of oil contaminated soil 2010
- Develop sustainable indicator to measure pavement sustainability on network and project level 2010
- Development of distress guidelines and condition rating for the evaluation of pavements on highway ramps and interchanges in the province of Ontario 2010
- Development of interlocking concrete pavement crosswalk performance models 2010
- Evaluation of nonlinear response of steel members under blast loading 2010
- The recycled road: A field study showcasing the use of recycled aggregate concrete pavements 2010
- A Methodology to Investigate Different Usage Aspects in Toronto Schools 2009
- A novel retrofit technique for strengthening steel columns using FRP 2009
- An interactive decision support method for multi-project schedule coordination 2009
- Investigation of the corrosion problems experienced in a housing complex 2009
- Simplified Approach for Condition Prediction of Building Components Utilizing Preventive Maintenance Data 2009
- A subjectivity-interval-based optimization model for solid waste management under uncertainty 2008
- An analysis of electricity, water, and gas consumption in Toronto's public schools 2008
- Experimental investigation of steel beams with flange holes 2008
- Identification of optimal plans for event-related evacuation under fuzziness environment 2008
- Planning of municipal solid waste management systems under mixed fuzzy and stochastic environment 2008
- Strategic planning for Waterloo's Centre for Pavement and Transportation Technology 2008
- Ultra Mobile Computer System for Accurate and Speedy Inspection of Buildings 2008
- Wind tunnel test and finite element analysis of a hyperbolic cooling tower 2008
- Base isolation of small low-rise buildings using fiber reinforced elastomeric bearings 2007
- Durability of green concrete 2007
- Field experimental design to quantify structural performance of Interlocking Concrete Paver (ICP) crosswalk designs 2007
- Leading edge innovations in road technology 2007
- Quantifiable performance indicators for managing road assets 2007
- A framework for asset valuation of civil infrastructure 2005
- An integrated approach of flood risk assessment for the red river in the Southern Manitoba 2005
- Characteristics of plasma cut-welded H-shaped steel columns 2005
- Comparison of genetic algorithms to mathematical programming for the optimal design and operation of pumping stations 2005
- Development of education tools for interlocking concrete pavements 2005
- Development of spring load restrictions using Canadian long term pavement performance data 2005
- Development of sustainable water systems for urban areas: A human hydrologic cycle approach 2005
- Drainage area and flow frequency distribution pattern of small Ontario streams 2005
- Evaluating user delay costs for typical Ontario work zones 2005
- FRP rehabilitation of façades in a Toronto district school board facility 2005
- Flexural testing of cold-formed steel members with reinforced web openings 2005
- Highway work zone strategies for safety 2005
- Incorporating variability into life cycle cost analysis and pay factors for performance-based specifications 2005
- Life-cycle cost analysis protocol for infrastructure assets 2005
- Measuring the performance of solid waste collection vehicles using global positioning systems 2005
- Simple blast resistance evaluation of structures 2005
- The blast mitigation working group 2005
- The mobility of employment in ontario construction 2005
- Towards sustainable urban transportation 2005
- Urban morphology and infrastructure: Implications for a sustainable future 2005
- User perceptions of maintenance, rehabilitation and reconstruction strategies 2005
- DELIVERY OF MUNICIPAL INFRASTRUCTURE PROJECTS: CRITICAL PARAMETERS FOR EFFICIENT MANAGEMENT 2003
- Development of an intuitive river-pollution index for prioritizing water quality management alternatives 2003
- In situ bioremediation of subsurface petroleum contamination in Western Canada 2003
- Study on mechanisms of biosurfactant-enhanced composting technology for waste management 2003
- Beam-column behaviour of cold-formed steel lipped channel sections 2002
- Cost Overrun in Reconstruction / Rehabilitation of Institutional Community Centers 2002
- Development of a methodology for assessing the technical and economic benefits of asphalt pavement laboratory equipment 2002
- Enterprise Resource Planning Systems in Construction: A Successful Implementation Process 2002
- Predicting the initiation and propagation of corrosion in reinforced concrete structures 2002
- Quantitative assessment of impact of layer moduli on surface deflections 2002
- The dynamic properties of a tuned liquid damper using an equivalent amplitude dependent tuned mass damper 2002
- The role of safety in asset valuation 2002
- An integrated approach for estimating oil volume in petroleum-contminated sites - A North American case study 1999
- An integrated stochastic environmental risk assessment method and its application to a petroleum-contaminated Site 1999
- Application of airport meteorological data for the determination of atmospheric mixing height 1999
- Expanding the design universe to accommodate sustainability 1999
- Success Factors in Reconstruction Projects: A Case Study 1999
- Alternative approaches to preservation of paved road infrastructure 1998
- Analysis of pavement deflection sensitivity to variations in layer properties 1998
- Recent developments in inspection and testing for infrastructure 1998
- The effect of reinforcement on pavement tensile strength 1998
- Analysis for local buckling limits and ductility of steel members 1997
- Description of brittle-ductile behaviour of rocks using a dilatancy damage model 1997
- Environmental footprints as an environmental assessment tool - an application to wall construction 1997
- Experimental investigation on the effects of perforation on axially loaded cold-formed steel members 1997
- Watershed environmental planning through an inexact-fuzzy multiobjective programming approach 1997
- FINITE ELEMENT MODELLING OF GAP JOINTS WITH SEPARATED RHS DOUBLE CHORDS. 1984
- FUTURE DIRECTIONS OF CANADIAN SEISMIC CODE PROVISIONS. 1982
- Location-aware resource-driven scheduling. 1:791-800. 2012
- Evaluating the long-term cost effectiveness of LEED Canadian schools. 4:2706-2715. 2011
- Indoor construction location sensing using low cost passive RFID tags. 3:2369-2378. 2011
- Constructing sustainable buildings: Challenges with construction methodologies. 3:1151-1160. 2009
- Studies in construction performance benchmarking. 1:136-145. 2008
- A web-based cost estimation system for infrastructure repair and improvement activities. 2005:CT-163. 2005
- Modeling drivers’ choice behavior: Challenges and future needs. 2005:TR-179. 2005
- A full-scale test facility to mitigate housing losses in extreme natural events. 2003:1510-1519. 2003
- Delivering projects with quality and safety. 2003:193-201. 2003