publication venue for
- A Comparative Study on Al0.6Ti0.4N Coatings Deposited by Cathodic Arc and HiPIMS in End Milling of Stainless Steel 316L. 14:811-811. 2024
- Investigating the Impact of Physical Vapour Deposition (PVD)-Coated Cutting Tools on Stress Corrosion Cracking Susceptibility in Turning Super Duplex Stainless Steel. 14:290-290. 2024
- Cold-Sprayed Multilayer Thermal Barrier–Catalytic Coatings for Engine Pistons: Coatings Design and Properties. 12:1332-1332. 2022
- The Relationship between Cyclic Multi-Scale Self-Organized Processes and Wear-Induced Surface Phenomena under Severe Tribological Conditions Associated with Buildup Edge Formation. 11:1002-1002. 2021
- A Comprehensive Study of Al0.6Ti0.4N Coatings Deposited by Cathodic Arc and HiPIMS PVD Methods in Relation to Their Cutting Performance during the Machining of an Inconel 718 Alloy. 11:723-723. 2021
- Investigation of the Wear Behavior of PVD Coated Carbide Tools during Ti6Al4V Machining with Intensive Built Up Edge Formation. 11:266-266. 2021
- Facilitating TiB2 for Filtered Vacuum Cathodic Arc Evaporation. 10:244-244. 2020
- Percolation Model for Renewable-Carbon Doped Functional Composites in Packaging Application: A Brief Review. 10:193-193. 2020
- Effect of Interlayer Thickness on Nano-Multilayer Coating Performance during High Speed Dry Milling of H13 Tool Steel. 9:737-737. 2019
- DLC and DLC-WS2 Coatings for Machining of Aluminium Alloys. 9:192-192. 2019
- Improving Corrosion and Corrosion-Fatigue Resistance of AZ31B Cast Mg Alloy Using Combined Cold Spray and Top Coatings. 8:443-443. 2018
- Improvement of Wear Performance of Nano-Multilayer PVD Coatings under Dry Hard End Milling Conditions Based on Their Architectural Development. 8:59-59. 2018
- Cutting Performance of Low Stress Thick TiAlN PVD Coatings during Machining of Compacted Graphite Cast Iron (CGI). 8:38-38. 2018
- Tribological and Wear Performance of Carbide Tools with TiB2 PVD Coating under Varying Machining Conditions of TiAl6V4 Aerospace Alloy. 7:187-187. 2017
- Hybrid Ti-MoS2 Coatings for Dry Machining of Aluminium Alloys. 7:149-149. 2017
- Investigation of Coated Cutting Tool Performance during Machining of Super Duplex Stainless Steels through 3D Wear Evaluations. 7:127-127. 2017
- Field Evaluation of Red-Coloured Hot Mix Asphalt Pavements for Bus Rapid Transit Lanes in Ontario, Canada. 7:58-58. 2017