selected scholarly activity
-
chapters
-
conferences
- Estimation of Thermo-physical Properties of Metallic Alloys. International Conference on Thermal Engineering. 2024
- Slow Shot Profile in High Pressure Die Casting. International Conference on Thermal Engineering. 2024
- Heat Transfer Enhancement of a Taylor-Couette Flow. International Conference on Thermal Engineering. 2023
- On Estimating Thermophysical Properties of Liquid Metals. International Conference on Thermal Engineering. 2023
- Heat Transfer Inside an Electric Motor. International Conference on Fluid Flow, Heat and Mass Transfer. 2022
- On Jet Impinging Boiling Heat Transfer. International Conference on Fluid Flow, Heat and Mass Transfer. 2021
- Boiling Heat Transfer Enhancement Using Engineered Surfaces. World Congress on Mechanical, Chemical, and Material Engineering. 2019
- Solar thermal buffer zone modelling: Experimental and numerical results. Proceedings, Annual Conference - Canadian Society for Civil Engineering. 638-647. 2015
- On the damping of wind-induced vibration in tall buildings. Civil-Comp Proceedings. 2013
- Effects of Acidity and Method of Preparation on Nucleate Pool Boiling of Nanofluids. Heat Transfer Engineering. 1148-1155. 2012
- Modeling of Heat Treatment of Randomly Distributed Loads in Multi-Zone Continuous Furnaces. Materials Science Forum. 289-294. 2012
- An Efficient Numerical Algorithm for the Prediction of Thermal and Microstructure Fields during Quenching of Steel Rods. ASTM Special Technical Publication. 500-522. 2010
- EFFECT OF STRONTIUM ON VISCOSITY AND LIQUID STRUCTURE OF Al-Si EUTECTIC ALLOYS. SHAPE CASTING: 3RD INTERNATIONAL SYMPOSIUM 2009. 173-+. 2009
- HEAT TREATMENT OF A356.2 ALUMINUM ALLOY: EFFECT OF QUENCH RATE AND NATURAL AGEING. SHAPE CASTING: 3RD INTERNATIONAL SYMPOSIUM 2009. 87-95. 2009
- Investigation of flow pulsation phenomena in a sub-channel geometry using Detached Eddy Simulation approach. TURBULENCE, HEAT AND MASS TRANSFER 6. 435-438. 2009
- Investigation of flow pulsation phenomena in a sub-channel geometry using Detached Eddy Simulation approach. Proceedings of the Sixth International Symposium On Turbulence, Heat and Mass Transfer. E-0034. 2009
- Numerical investigation of turbulent flow in a twin rectangular sub-channel geometry. Canadian Nuclear Society - 29th Annual Conference of the Canadian Nuclear Society and 32nd CNS/CNA Student Conference 2008. 177-193. 2008
- Unsteady Reynolds Averaged Navier-Stokes (URANS) modelling of turbulent flow in a twin rectangular sub-channel geometry. Canadian Nuclear Society - 29th Annual Conference of the Canadian Nuclear Society and 32nd CNS/CNA Student Conference 2008. 258-268. 2008
- Experimental study of steady state nucleate boiling heat transfer under planar jet impingement. Proceedings - 12th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH-12. 2007
- How to load a batch-type furnace. TMS Annual Meeting. 29-37. 2007
- How to measure viscosity of liquid aluminum alloys?. SHAPE CASTING: 2ND INTERNATIONAL SYMPOSIUM. 43-+. 2007
- Nucleate Boiling Heat Transfer Under Liquid Jet Impingement. ASME/JSME 2007 Thermal Engineering Heat Transfer Summer Conference, Volume 1. 723-729. 2007
- Flow mode-transition of natural convection inside inclined complex enclosures. WIT Transactions on Modelling and Simulation. 803-815. 2005
- Marangoni effect in refractory slag line dissolution. Advances in Refractories for the Metallurgical Industries IV. 513-526. 2004
- Adaptive smart clinical pacemaker. PROCEEDINGS OF THE 46TH IEEE INTERNATIONAL MIDWEST SYMPOSIUM ON CIRCUITS & SYSTEMS, VOLS 1-3. 396-399. 2003
- Evaluation of Heat Transfer Coefficients in Water Spray Quenching Systems. ASM Proceedings: Heat Treating. 785-790. 2000
- The Use of Water Spray Quenching for Long Steel Bars. ASM Proceedings: Heat Treating. 589-593. 1998
-
journal articles
- Numerical and Experimental Study of The Viscous Dissipation of Oil inside the Electric Motor’s Gap. Journal of Fluid Flow, Heat and Mass Transfer. 10:45-51. 2023
- An experimental investigation of slat-screens to mitigate fluid sloshing in microgravity. Journal of Space Safety Engineering. 9:319-327. 2022
- Numerical investigation of thermal losses within an internal gear train submerged in a multiphase flow and enclosed in a rotating casing. International Journal of Thermofluids. 15:100188-100188. 2022
- Investigation of transient multiphase Taylor-Couette flow. AEJ - Alexandria Engineering Journal. 61:2723-2738. 2022
- Solidification Simulation of Al-Si Alloys with Dendrite Tip Undercooling. Metals. 12:608-608. 2022
- Rewetting Delay Time During Jet Impingement Quench Cooling of Hot Curved Surfaces. Nuclear Technology. 208:520-538. 2022
- Numerical Study of Electric Motors Cooling Using an Axial Air Flow. Journal of Fluid Flow, Heat and Mass Transfer. 9:101-105. 2022
- Electrical discharge surface texturing for enhanced pool boiling heat transfer. Journal of Materials Processing Technology. 293:117083-117083. 2021
- Prediction of thermal buffer zone effectiveness in real‐size buildings—An experimental and analytical study. International Journal of Energy Research. 43:5284-5300. 2019
- Interaction between primary dendrite arm spacing and velocity of fluid flow during solidification of Al–Si binary alloys. Journal of Materials Science. 53:9771-9789. 2018
- Evaluate pressure drop of slat screen in an oscillating fluid in a tuned liquid damper. Computers and Fluids. 156:384-401. 2017
- Modeling of Bubble Growth Under an Impinging Free Planar Water Jet. Heat Transfer Engineering. 38:63-74. 2017
- Experimental investigation of quench and re-wetting temperatures of hot horizontal tubes well above the limiting temperature for solid–liquid contact. Nuclear Engineering and Design. 311:167-183. 2017
- Measurement and analysis of the re-wetting front velocity during quench cooling of hot horizontal tubes. Nuclear Engineering and Design. 311:184-198. 2017
- Heavy oil viscosity and density prediction at normal and elevated temperatures. Journal of Petroleum Exploration and Production. 6:253-263. 2016
- Modeling Effective Thermal Conductivity of Randomly Distributed Loads of Mono-Sized Parts of Arbitrary Geometry. Materials Performance and Characterization. 5:7-22. 2016
- Modeling of transition boiling under an impinging water jet. International Journal of Heat and Mass Transfer. 91:1273-1282. 2015
- Numerical Study of Slat Screen Pattern Effect on Design Parameters of Tuned Liquid Dampers. Journal of Fluids Engineering, Transactions of the ASME. 136. 2014
- Experimental investigation of the effect of particle deposition on pool boiling of nanofluids. International Journal of Heat and Mass Transfer. 55:3423-3436. 2012
- Effect of Shrinkage on Primary Dendrite Arm Spacing during Binary Al-Si Alloy Solidification. Metallurgical and Materials Transactions A. 42:2331-2345. 2011
- Rheology of liquid metals and alloys. Journal of Non-Newtonian Fluid Mechanics. 166:831-838. 2011
- Sensitivity of Thermophysical Material Properties on Solidification Simulation of Al-Si Binary Alloys. Metallurgical and Materials Transactions A. 42:2346-2357. 2011
- Erratum: Numerical modeling of sloshing motion in a tuned liquid damper outfitted with a submerged slat screen. International Journal for Numerical Methods in Fluids. 65:876-876. 2011
- Numerical modeling of sloshing motion in a tuned liquid damper outfitted with a submerged slat screen. International Journal for Numerical Methods in Fluids. 65:834-855. 2011
- Toward the achievement of vision 2020 goals of the heat treating industry. JOM. 62:55-59. 2010
- Rotational rheometry of liquid metal systems: Measurement geometry selection and flow curve analysis. Journal of Non-Newtonian Fluid Mechanics. 165:733-742. 2010
- A Modified Online Input Estimation Algorithm for Inverse Modeling of Steel Quenching. Numerical Heat Transfer, Part B: Fundamentals. 57:1-29. 2010
- Numerical investigation of flow pulsation phenomena using DES-SST approach. Transactions of the American Nuclear Society. 100:748-749. 2009
- Simulation of flow pulsations in a twin rectangular sub-channel geometry using unsteady Reynolds Averaged Navier–Stokes modelling. Nuclear Engineering and Design. 239:2964-2980. 2009
- Modeling of nucleate boiling heat transfer under an impinging free jet. International Journal of Heat and Mass Transfer. 52:5557-5566. 2009
- Numerical simulation of structure response outfitted with a tuned liquid damper. Computers & structures. 87:1154-1165. 2009
- Validation of DES-SST Based Turbulence Model for a Fully Developed Turbulent Channel Flow Problem. Numerical Heat Transfer; Part A: Applications. 55:337-361. 2009
- An Efficient Numerical Algorithm for the Prediction of Thermal and Microstructure Fields during Quenching of Steel Rods. Journal of the American Society for Testing and Materials (ASTM) International. 5:1-18. 2008
- Numerical study of the modeling error in the online input estimation algorithm used for inverse heat conduction problems (IHCPs). Journal of Physics: Conference Series. 135:012004-012004. 2008
- Turbulence Modeling of Forced Convection Heat Transfer in Two-Dimensional Ribbed Channels. Journal of Electronic Packaging, Transactions of the ASME. 130. 2008
- Experimental investigation of propagation of wetting front on curved surfaces exposed to an impinging water jet. International Journal of Microstructure and Materials Properties. 3:654-654. 2008
- Optimization of Energy Utilization and Productivity of Heat Treating Batch-Type Furnaces. Journal of the American Society for Testing and Materials (ASTM) International. 5:1-17. 2008
- Detached eddy simulation based turbulence modeling approach for inter sub-channel thermal mixing. Proceedings - 12th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, NURETH-12. 2007
- Flow mode-transition of natural convection in inclined rectangular enclosures subjected to bidirectional temperature gradients. International Journal of Thermal Sciences. 45:782-795. 2006
- A nonlinear numerical model for sloshing motion in tuned liquid dampers. International Journal of Numerical Methods for Heat and Fluid Flow. 15:306-324. 2005
- Determination of heat transfer rates in an industry-like spray quench system using multiple impinging water jets. International Journal of Materials and Product Technology. 24:184-184. 2005
- Determination of heat transfer rates in an industry-like spray quench system using multiple impinging water jets. International Journal of Materials and Product Technology. 24:184-198. 2005
- Total hip performance under magnetic field. Journal of Materials Processing Technology. 153-154:508-513. 2004
- Marangoni convection. Part 1. A cavity with differentially heated sidewalls. Journal of Fluid Mechanics. 405:79-110. 2000
- Marangoni convection. Part 2. A cavity subject to point heating. Journal of Fluid Mechanics. 405:111-129. 2000
- Numerical Simulation of Unsteady Nonisothermal Capillary Interfaces. Journal of Computational Physics. 145:110-140. 1998
-
preprints