selected scholarly activity
-
books
-
chapters
-
conferences
- A Shake Table Testing Campaign of Electrical Cabinets. Lecture Notes in Civil Engineering. 735-749. 2023
- SEISMIC NUMERICAL MODELLING OF ELECTRICAL CABINETS. Proceedings of the 8th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2015). 4416-4426. 2023
- SEISMIC PERFORMANCE OF STEEL MOMENT-RESISTING FRAME RETROFITTED WITH LINEAR AND NONLINEAR VISCOUS DAMPERS. World Conference on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures. 2019
- A Comparison of Recently Developed Analytical Models for Steel Moment-Resisting Frame Connections. 6th International Structural Specialty Conference 2018, Held as Part of the Canadian Society for Civil Engineering Annual Conference 2018. 106-115. 2018
- IDENTIFYING CRITICAL LOCATIONS FOR CONNECTION DUCTILITY IN STEEL MOMENT RESISTING FRAMES. 11th National Conference on Earthquake Engineering 2018, NCEE 2018: Integrating Science, Engineering, and Policy. 7227-7237. 2018
- System Identification and Structural Modelling of Italian School Buildings. Conference Proceedings of the Society for Experimental Mechanics Series. 301-303. 2017
- Seismic Performance Evaluation of Buried Pipelines Retrofitted with Cured-in-Place Pipe Liner Technology under Near-Fault Ground Motions. Structures Congress 2015. 1903-1914. 2015
- Seismic Fragility Study of Fire Sprinkler Piping Systems. Structures Congress 2013. 1533-1544. 2013
- Research on the Seismic Performance of Nonstructural Components. AEI 2011. 361-368. 2011
- Seismic Protection of Electrical Transformer-Bushing Systems Incorporating Flexural Stiffeners. Proceedings of the International Conference on Structural Dynamic , EURODYN. 227-233. 2011
- A warm welcome to Toronto and the 9th US & 10th Canadian conference on earthquake engineering 2010: Reaching beyond borders. 9th US National and 10th Canadian Conference on Earthquake Engineering 2010, Including Papers from the 4th International Tsunami Symposium. 2010
- Full-Scale Experimental Facility and Loading Protocols for Seismic Performance Assessment of Nonstructural Systems. Structures Congress 2010. 2621-2632. 2010
- Numerical Study to Investigate the Effect of Elastomeric Snubber Properties on Seismic Response of Vibration-Isolated Nonstructural Components. Improving the Seismic Performance of Existing Buildings and Other Structures. 663-673. 2009
- Example Evaluation of the ATC-63 Methodology for Wood Light-Frame System. Structures Congress 2008. 1-10. 2008
- Experimental Seismic Investigation of a Full-Scale Woodframe Building. Structures Congress 2008. 1-10. 2008
- Experimental Verification of the Static Method for Seismic Design of Vibration-Isolated HVAC Equipment. AEI 2008. 1-10. 2008
- Experimental seismic-performance evaluation of integrated isolation/restraint systems for heavy HVAC equipment. ASHRAE Transactions. 56-67. 2008
- Experimental Seismic Performance Evaluation of a Full-Scale Woodframe Building. Structural Engineering Research Frontiers. 1-8. 2007
- Cyclic Performance of Precast Concrete Segmental Bridge Columns: Simplified Analytical and Finite Element Studies. Transportation Research Record. 66-74. 2006
- An Experimental Study on the Seismic Response of Electrical Substation Equipment Interconnected by Flexible Conductors. Advancing Mitigation Technologies and Disaster Response for Lifeline Systems. 667-676. 2003
- Seismic Displacement at Interconnection: Points of Substation Equipment. Advancing Mitigation Technologies and Disaster Response for Lifeline Systems. 597-606. 2003
- Seismic Response of High Voltage Transformers. Advancing Mitigation Technologies and Disaster Response for Lifeline Systems. 647-656. 2003
- Seismic demands on post-tensioned energy dissipating moment-resisting steel frames. STESSA 2003: BEHAVIOUR OF STEEL STRUCTURES IN SEISMIC AREAS. 511-517. 2003
- An Experimental Study on the Dynamic Interaction of Interconnected Electrical Equipment during Earthquakes. Electrical Transmission in a New Age. 411-419. 2002
- Shake Table Testing of a Full-Scale Two-Story Woodframe House. Structures 2001. 1-8. 2001
- The CUREe-Caltech Woodframe Project in California: Testing and analysis to mitigate earthquake damage to wood-frame construction. PROCEEDINGS OF THE 2ND ANNUAL CONFERENCE ON DURABILITY AND DISASTER MITIGATION IN WOOD-FRAME HOUSING. 137-147. 2001
- Ongoing Seismic Testing and Analysis Program of the CUREe-Caltech Woodframe Project. Advanced Technology in Structural Engineering. 1-8. 2000
- Non-invasive passive energy dissipation systems for the seismic design and retrofit of steel structures. BEHAVIOUR OF STEEL STRUCTURES IN SEISMIC AREAS. 387-394. 2000
- Out-of-plane seismic behavior of brick masonry walls of typical turn-of-the-century North American residential buildings. STRUCTURAL ENGINEERING IN THE 21ST CENTURY. 117-120. 1999
- Design of Tension-Only Concentrically Braced Steel Frames for seismic induced impact loading. Engineering structures. 1087-1096. 1998
- Behaviour of tension-only concentrically braced steel frames under simulated earthquake loads. ADVANCES IN STEEL STRUCTURES, VOLS 1 AND 2. 1047-1052. 1996
- A SHAKE TABLE STUDY ON THE POUNDING OF BUILDINGS DURING EARTHQUAKES. FIFTH U.S. NATIONAL CONFERENCE ON EARTHQUAKE ENGINEERING - EARTHQUAKE AWARENESS AND MITIGATION ACROSS THE NATION, PROCEEDINGS, VOL II. 671-680. 1994
- SOME SEISMIC STUDIES OF FRICTION DAMPED STRUCTURES. EARTHQUAKE ENGINEERING. 367-386. 1994
- MODAL-ANALYSIS AND TESTING OF THE CABLE-STAYED SHIPSHAW BRIDGE IN JONQUIERE, QUEBEC. PROCEEDINGS OF THE 11TH INTERNATIONAL MODAL ANALYSIS CONFERENCE, VOLS 1 AND 2. 14-20. 1993
- RESPONSE SPECTRA FOR STRUCTURES ON SOFT SOILS IN EASTERN CANADA. SOIL DYNAMICS AND EARTHQUAKE ENGINEERING VI. 705-718. 1993
- THE USE OF ENERGY-BALANCE IN NONLINEAR SEISMIC ANALYSIS. PROCEEDINGS OF THE TENTH WORLD CONFERENCE ON EARTHQUAKE ENGINEERING, VOLS 1-10. 4111-4116. 1992
- Seismic analysis of structurally interconnected steel frames. EARTHQUAKE ENGINEERING. 125-132. 1991
- A MICROCOMPUTER SOFTWARE PACKAGE FOR SHAKE TABLE TESTING. EARTHQUAKE ENGINEERING. 351-358. 1991
- SEISMIC BEHAVIOR OF CONCENTRICALLY BRACED STEEL FRAMES. PROCEEDINGS - 1991 ANNUAL TECHNICAL SESSION : INELASTIC BEHAVIOR AND DESIGN OF FRAMES. 291-302. 1991
- THE USE OF FRICTION DAMPERS IN THE SEISMIC DESIGN AND RETROFIT OF BUILDINGS. STRUCTURAL REPAIR AND MAINTENANCE OF HISTORICAL BUILDINGS II, VOL 1. 101-119. 1991
- SEISMIC PERFORMANCE OF FRICTION DAMPED AND BASE ISOLATED STRUCTURES FOUNDED ON MEXICO-CITY SOILS. STRUCTURAL DYNAMICS AND SOIL-STRUCTURE INTERACTION. 385-402. 1989
-
journal articles
- Suitable engineering demand parameters for acceleration‐sensitive nonstructural components. Earthquake Engineering and Structural Dynamics. 53. 2024
- Influence of Fluid Viscous Damper Stiffness on the Floor Acceleration Response of Steel Moment-Resisting Frames Under Far-Field Ground Motions. Journal of Earthquake Engineering. 28:2158-2187. 2024
- Consequences of consequence models: The impact of economies of scale on seismic loss estimates. Earthquake Spectra. 40:1396-1424. 2024
- Expected seismic response and annual seismic loss of viscously damped braced steel frames. Engineering structures. 303:117569-117569. 2024
- Shake Table Testing and Modeling of New Zealand Light-Frame Wood Buildings. Journal of Structural Engineering. 149. 2023
- Performance‐based seismic classification of acceleration‐sensitive non‐structural elements. Earthquake Engineering and Structural Dynamics. 52:4222-4244. 2023
- Seismic demand on non‐structural elements for quantifying seismic performance factors. Earthquake Engineering and Structural Dynamics. 52:1016-1039. 2023
- Calibrated Equivalent Viscous Damping for Direct Displacement Based Seismic Design of Pallet-Type Steel Storage Racks. Journal of Earthquake Engineering. 27:1012-1046. 2023
- Finite-Element Modeling for Seismic Damage Estimation of Suspended Ceiling Systems. Journal of Structural Engineering. 149. 2023
- A Framework for the Quantification of Non-Structural Seismic Performance Factors. Journal of Earthquake Engineering. 26:8468-8494. 2022
- Appraisal of seismic design methodologies for suspended non-structural elements in Europe. Bulletin of Earthquake Engineering. 20:8061-8098. 2022
- Calibrated Equivalent Viscous Damping for Direct Displacement-Based Seismic Design of Suspended Piping Trapeze Restraint Installations. Journal of Earthquake Engineering. 26:8063-8091. 2022
- Parametric study and prediction models of the seismic response of single-degree-of-freedom structural systems equipped with Maxwell material fluid viscous dampers. Structures. 43:388-406. 2022
- A framework for the rapid assessment of seismic upgrade viability using performance-based earthquake engineering. Earthquake Spectra. 38:1761-1787. 2022
- A probabilistic strong floor motion duration model for seismic performance assessment of non‐structural building elements. Earthquake Engineering and Structural Dynamics. 50:4161-4179. 2021
- Shake‐table tests of innovative drift sensitive nonstructural elements in a low‐damage structural system. Earthquake Engineering and Structural Dynamics. 50:2398-2420. 2021
- Seismic response comparison of steel MRFs with yielding and low-damage connections. Journal of Constructional Steel Research. 179:106502-106502. 2021
- Performance-Based Seismic Design of Nonstructural Building Elements. Journal of Earthquake Engineering. 25:237-269. 2021
- Seismic retrofit of existing school buildings in Italy: Performance evaluation and loss estimation. Engineering structures. 225:111243-111243. 2020
- Seismic Demand on Acceleration-Sensitive Nonstructural Components in Viscously Damped Braced Frames. Journal of Structural Engineering. 146. 2020
- Integrated Structural–Nonstructural Performance-Based Seismic Design and Retrofit Optimization of Buildings. Journal of Structural Engineering. 146. 2020
- Seismic numerical modelling of suspended piping trapeze restraint installations based on component testing. Bulletin of Earthquake Engineering. 18:3247-3283. 2020
- Assessing seismic risk in typical Italian school buildings: From in-situ survey to loss estimation. International Journal of Disaster Risk Reduction. 44:101448-101448. 2020
- Consistent floor response spectra for performance‐based seismic design of nonstructural elements. Earthquake Engineering and Structural Dynamics. 49:261-284. 2020
- Experimental seismic response evaluation of suspended piping restraint installations. Bulletin of Earthquake Engineering. 18:1499-1524. 2020
- Probabilistic estimation of floor response spectra in masonry infilled reinforced concrete building portfolio. Engineering structures. 202:109842-109842. 2020
- System Identification and Seismic Assessment Modeling Implications for Italian School Buildings. Journal of Performance of Constructed Facilities. 33. 2019
- Seismic response of viscously damped braced thin-wall piping system: a proof-of-concept case study. Bulletin of Earthquake Engineering. 17:537-559. 2019
- Seismic floor isolation using recycled tires for essential buildings in developing countries. Bulletin of Earthquake Engineering. 16:6299-6333. 2018
- DEVELOPMENT OF SELF-CENTERING EARTHQUAKE RESISTING SYSTEMS 2018
- Displacement-Based Seismic Design of Light-Frame Wood Buildings 2018
- Effet du taux de déformation et de la température sur le comportement sismique des piles de ponts renforcées avec des matériaux composites 2018
- Effect of cyclic loading protocols on the experimental seismic performance evaluation of suspended piping restraint installations. International Journal of Pressure Vessels and Piping. 166:61-71. 2018
- Seismic assessment and loss estimation of existing school buildings in Italy. Engineering structures. 168:142-162. 2018
- Identifying Critical Connections for the Global Performance of Steel Moment Resisting Frames. Key Engineering Materials. 763:165-173. 2018
- Automated seismic design of non-structural elements with building information modelling. Automation in Construction. 84:166-175. 2017
- Development of wood and steel diaphragm hysteretic connector database for performance-based earthquake engineering. Bulletin of Earthquake Engineering. 15:4319-4347. 2017
- Experimental Performance Evaluation of Pipelines Rehabilitated with Cured-In-Place Pipe Liner under Earthquake Transient Ground Deformations. Journal of Infrastructure Systems. 23. 2017
- Numerical simulation and seismic performance evaluation of buried pipelines rehabilitated with cured‐in‐place‐pipe liner under seismic wave propagation. Earthquake Engineering and Structural Dynamics. 46:811-829. 2017
- Assessment of the loss of functionality of individual rooms in critical facilities after earthquakes. Bulletin of Earthquake Engineering. 15:1135-1159. 2017
- Assessing Modeling Complexities on the Seismic Performance of an Instrumented Short-Period Hospital. Journal of Performance of Constructed Facilities. 31. 2017
- Evaluation of Out-of-Plane Wall Anchorage Force Provisions in Buildings with Rigid Walls and Flexible Roof Diaphragms. Earthquake Spectra. 33:1-23. 2017
- Evaluation of an alternative seismic design approach for rigid wall flexible wood roof diaphragm buildings through probabilistic loss estimation and disaggregation. Engineering structures. 127:31-39. 2016
- Buildings with Rigid Walls and Flexible Roof Diaphragms. I: Evaluation of Current U.S. Seismic Provisions. Journal of Structural Engineering. 142. 2016
- Buildings with Rigid Walls and Flexible Roof Diaphragms. II: Evaluation of a New Seismic Design Approach Based on Distributed Diaphragm Yielding. Journal of Structural Engineering. 142. 2016
- Distributed Yielding Concept for Improved Seismic Collapse Performance of Rigid Wall-Flexible Diaphragm Buildings. Journal of Structural Engineering. 142. 2016
- Effects of Anchorage Hardware on the Cyclic Tensile Response of Unbonded Monostrands (vol 59, pg 60, 2014). PCI JOURNAL. 90-90. 2016
- Experimental Seismic Performance of a Hybrid Sliding–Rocking Bridge for Various Specimen Configurations and Seismic Loading Conditions. Journal of Bridge Engineering. 20. 2015
- A case study on the application of passive control and seismic isolation techniques to cable-stayed bridges: A comparative investigation through non-linear dynamic analyses. Engineering structures. 99:232-252. 2015
- Seismic Collapse Capacity–Based Evaluation and Design of Frame Buildings with Viscous Dampers Using Pushover Analysis. Journal of Structural Engineering. 141. 2015
- Seismic Fragility Study of Fire Sprinkler Piping Systems with Grooved Fit Joints. Journal of Structural Engineering. 141. 2015
- Seismic Response of Pressurized Fire Sprinkler Piping Systems I: Experimental Study. Journal of Earthquake Engineering. 19:649-673. 2015
- Seismic Response of Pressurized Fire Sprinkler Piping Systems II: Numerical Study. Journal of Earthquake Engineering. 19:674-699. 2015
- Analytical Seismic Fragility Analyses of Fire Sprinkler Piping Systems with Threaded Joints. Earthquake Spectra. 31:1125-1155. 2015
- Studio della Risposta di Elementi Non Strutturali di edifice scolastici soggetti ad eventi sismici. Progettazione Sismica. 6:9-29. 2015
- Direct Displacement-Based Seismic Design of Propped Rocking Walls. Earthquake Spectra. 31:179-196. 2015
- Experimental Seismic Fragility of Pressurized Fire Suppression Sprinkler Piping Joints. Earthquake Spectra. 30:1733-1748. 2014
- Quasi-Static Cyclic Testing of a Large-Scale Hybrid Sliding-Rocking Segmental Column with Slip-Dominant Joints. Journal of Bridge Engineering. 19. 2014
- Seismic Testing of Critical Lifelines Rehabilitated with Cured in Place Pipeline Lining Technology. Journal of Earthquake Engineering. 18:964-985. 2014
- Performance-based seismic design of nonstructural building components: The next frontier of earthquake engineering. Earthquake Engineering and Engineering Vibration. 13:17-46. 2014
- Effects of anchorage hardware on the cyclic tensile response of unbonded monostrands. PCI JOURNAL. 59:60-77. 2014
- Large-Scale Seismic Testing of a Hybrid Sliding-Rocking Posttensioned Segmental Bridge System. Journal of Structural Engineering. 140. 2014
- Simplified Seismic Sidesway Collapse Capacity-Based Evaluation and Design of Frame Buildings with Linear Viscous Dampers. Journal of Earthquake Engineering. 18:528-552. 2014
- Computational Framework for Automated Seismic Design of Steel Frames with Self-Centering Connections. Journal of Computing in Civil Engineering. 28:170-181. 2014
- Post-earthquake evaluation of pipelines rehabilitated with cured in place lining technology using acoustic emission. Construction and Building Materials. 54:326-338. 2014
- Simplified seismic sidesway collapse analysis of frame buildings. Earthquake Engineering and Structural Dynamics. 43:429-448. 2014
- Seismic Response of Squat Rigid Bodies on Inclined Planes with Rigid Boundaries. Journal of Engineering Mechanics - ASCE. 140:149-158. 2014
- Seismic Response of High-Voltage Transformer-Bushing Systems Incorporating Flexural Stiffeners I: Numerical Study. Earthquake Spectra. 29:1335-1352. 2013
- Seismic Response of High-Voltage Transformer-Bushing Systems Incorporating Flexural Stiffeners II: Experimental Study. Earthquake Spectra. 29:1353-1367. 2013
- Numerical framework for nonlinear analysis of two-dimensional light-frame wood structures. Ingegneria Sismica. 30:5-26. 2013
- Experimental Seismic Fragility of Cold-Formed Steel Framed Gypsum Partition Walls. Journal of Structural Engineering. 139:1285-1293. 2013
- Testing Protocol for Experimental Seismic Qualification of Distributed Nonstructural Systems. Earthquake Spectra. 27:835-856. 2011
- LRFD-Based Analysis and Design Procedures for Bridge Bearings and Seismic Isolators 2011
- Cyclic behavior of precast segmental concrete bridge columns with high performance or conventional steel reinforcing bars as energy dissipation bars. Earthquake Engineering and Structural Dynamics. 39:1181-1198. 2010
- A Two-Dimensional Numerical Model for the Seismic Collapse Assessment of Light-Frame Wood Structures. Structures Congress 2010. 38:832-843. 2010
- Experimental Seismic Fragility of Steel Studded Gypsum Partition Walls and Fire Sprinkler Piping Subsystems. Structures Congress 2010. 23:2633-2644. 2010
- Experimental Seismic Response of a Full-Scale Light-Frame Wood Building. Journal of Structural Engineering. 136:246-254. 2010
- Experimental Investigation on the Seismic Behavior of Palletized Merchandise in Steel Storage Racks. Earthquake Spectra. 26:209-233. 2010
- Example application of the FEMA P695 (ATC-63) methodology for the collapse performance evaluation of wood light-frame systems 2010
- Three-Dimensional Seismic Response of a Full-Scale Light-Frame Wood Building: Numerical Study. Journal of Structural Engineering. 136:56-65. 2010
- Testing facility for experimental evaluation of non‐structural components under full‐scale floor motions. Structural Design of Tall and Special Buildings. 18:387-404. 2009
- Incremental dynamic analysis of woodframe buildings. Earthquake Engineering and Structural Dynamics. 38:477-496. 2009
- Experimental Seismic Response of Base Isolated Pallet-Type Steel Storage Racks. Earthquake Spectra. 24:617-639. 2008
- Review of Displacement-Based Seismic Design of Structures by M. J. N. Priestley, G. M. Calvi, and M. J. KowalskyDisplacement-Based Seismic Design of StructuresIUSS Press. Journal of Structural Engineering. 134:1065-1065. 2008
- Effect of Elastomeric Snubber Properties on Seismic Response of Vibration-Isolated Mechanical Equipment: An Experimental Study. Earthquake Spectra. 24:387-403. 2008
- Influence of passive supplemental damping systems on structural and nonstructural seismic fragilities of a steel building. Engineering structures. 30:675-682. 2008
- Performance-based seismic design of mid-rise light-frame wood buildings: An overview of the NEESWood project 2008
- Experimental Stiffness of Pallet-Type Steel Storage Rack Tier Drop Connectors. Practice Periodical on Structural Design and Construction. 12:210-215. 2007
- Experimental Stiffness and Seismic Response of Pallet-Type Steel Storage Rack Connectors. Practice Periodical on Structural Design and Construction. 11:161-170. 2006
- Performance-Based Seismic Design of Pallet-Type Steel Storage Racks. Earthquake Spectra. 22:47-64. 2006
- Seismic Response of High Voltage Electrical Transformer–Bushing Systems. Journal of Structural Engineering. 132:287-295. 2006
- Cyclic Performance of Precast Concrete Segmental Bridge Columns. Transportation Research Record. 1976:66-74. 2006
- Development of a Performance-Based Seismic Design Philosophy for Mid-Rise Woodframe Construction: Progress on the NEESWood Project 2006
- Experimental Seismic Response of High-Voltage Transformer-Bushing Systems. Earthquake Spectra. 21:1009-1025. 2005
- Review of selected recent research on US seismic design and retrofit strategies for steel structures. Structural Control and Health Monitoring. 7:103-114. 2005
- Flexural Properties of Flexible Conductors Interconnecting Electrical Substation Equipment. Journal of Structural Engineering. 131:151-159. 2005
- Seismic Analysis of Woodframe Structures. I: Model Formulation. Journal of Structural Engineering. 130:1353-1360. 2004
- Seismic Analysis of Woodframe Structures. II: Model Implementation and Verification. Journal of Structural Engineering. 130:1361-1370. 2004
- Blind Predictions of the Seismic Response of a Woodframe House: An International Benchmark Study. Earthquake Spectra. 20:825-851. 2004
- Generation of floor accelerations for seismic testing of operational and functional building components. Canadian Journal of Civil Engineering. 31:646-663. 2004
- Shake table testing of bookcase – partition wall systems. Canadian Journal of Civil Engineering. 31:664-676. 2004
- Seismic Response of Electrical Substation Equipment Interconnected by Flexible Conductors. Journal of Structural Engineering. 130:769-778. 2004
- Estimation of Displacement at Interconnection Points of Substation Equipment Subjected to Earthquakes. IEEE Transactions on Power Delivery. 19:618-628. 2004
- Performance of timber buildings under seismic load. Part 2: modelling. Structural Control and Health Monitoring. 6:79-83. 2004
- Seismic Response of Concentrically Braced Steel Frames Made with Rectangular Hollow Bracing Members. Journal of Structural Engineering. 129:1626-1636. 2003
- Sliding response of gravity dams including vertical seismic accelerations. Earthquake Engineering and Engineering Vibration. 2:189-200. 2003
- FRICTION DAMPED STEEL MOMENT-RESISTING FRAMES SUBJECTED TO LONG-DISTANCE EARTHQUAKES: INFLUENCE OF WELD FRACTURES. Journal of Earthquake Engineering. 7:495-510. 2003
- Hysteretic damping of wood framed buildings. Engineering structures. 25:461-471. 2003
- A CASE STUDY OF SEISMIC MODELING AND ANALYTICAL STUDY ON WOODFRAME BUILDINGS IN CALIFORNIA : Analytical study on seismic behavior of wooden construction. Journal of Structural and Construction Engineering. 68:115-121. 2003
- Seismic Testing of Two-Story Woodframe House: Influence of Wall Finish Materials. Journal of Structural Engineering. 128:1337-1345. 2002
- Posttensioned Energy Dissipating Connections for Moment-Resisting Steel Frames. Journal of Structural Engineering. 128:1111-1120. 2002
- Experimental parametric study on the in-plane stiffness of wood diaphragms. Canadian Journal of Civil Engineering. 29:554-566. 2002
- Performance of timber buildings under seismic load. Part 1: experimental studies. Structural Control and Health Monitoring. 4:276-285. 2002
- Seismic response of self‐centring hysteretic SDOF systems. Earthquake Engineering and Structural Dynamics. 31:1131-1150. 2002
- Impulsive Seismic Response of Bridge Column-Cap Beam Joints. ACI Structural Journal. 99:470-479. 2002
- Performance-Based Seismic Design of Wood Framed Buildings. Journal of Structural Engineering. 128:39-47. 2002
- Characterization and testing of the Caltrans Seismic Response Modification Device Test System. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences. 359:1829-1850. 2001
- Performance Evaluation of Passive Damping Systems for the Seismic Retrofit of Steel Moment-Resisting Frames Subjected to Near-Field Ground Motions. Earthquake Spectra. 17:427-456. 2001
- Out-of-Plane Seismic Evaluation and Retrofit of Turn-of-the-Century North American Masonry Walls. Journal of Structural Engineering. 127:561-569. 2001
- Stress-strain behavior of reinforcing steel and concrete under seismic strain rates and low temperatures. Materials and Structures/Materiaux et Constructions. 34:235-239. 2001
- Stress-strain behavior of reinforcing steel and concrete under seismic strain rates and low temperatures. Materials and Structures/Materiaux et Constructions. 34:235-239. 2001
- Cyclic Analysis of Wood Shear Walls. Journal of Structural Engineering. 127:433-441. 2001
- Guidelines, Specifications, and Seismic Performance Characterization of Nonstructural Building Components and Equipment 2001
- Seismic Interaction of Interconnected Electrical Substation Equipment. Journal of Structural Engineering. 126:1140-1149. 2000
- Performance Evaluation of Friction Spring Seismic Damper. Journal of Structural Engineering. 126:491-499. 2000
- Seismic evaluation and retrofit with steel jackets of reinforced concrete bridge piers detailed with lap-splices. Canadian Journal of Civil Engineering. 27:1-16. 2000
- Seismic performance of ductile and nominally ductile reinforced concrete moment resisting frames. I. Experimental study. Canadian Journal of Civil Engineering. 25:331-341. 1998
- Seismic performance of ductile and nominally ductile reinforced concrete moment resisting frames. II. Analytical study. Canadian Journal of Civil Engineering. 25:342-352. 1998
- Near Field Seismic Response of Steel Moment Resisting Frames Retrofitted with Passive Friction Energy Dissipating Systems. ISET Journal of Earthquake Technology. 35:243-263. 1998
- Frictional Response of PTFE Sliding Bearings at High Frequencies. Journal of Bridge Engineering. 2:139-148. 1997
- Seismic performance of steel moment resisting frames retrofitted with a locally reduced beam section connection. Canadian Journal of Civil Engineering. 24:78-89. 1997
- SEISMIC IMPACT LOADING IN INELASTIC TENSION-ONLY CONCENTRICALLY BRACED STEEL FRAMES: MYTH OR REALITY?. Earthquake Engineering and Structural Dynamics. 25:1373-1389. 1996
- Performance of timber structures during the Hyogo-ken Nanbu earthquake of 17 January 1995. Canadian Journal of Civil Engineering. 23:652-664. 1996
- Seismic design of steel buildings: lessons from the 1995 Hyogo-ken Nanbu earthquake. Canadian Journal of Civil Engineering. 23:727-756. 1996
- Analytical prediction of experimental building pounding. Earthquake Engineering and Structural Dynamics. 24:1131-1154. 1995
- Performance of steel structures during the 1994 Northridge earthquake. Canadian Journal of Civil Engineering. 22:338-360. 1995
- Seismic weaknesses of some residential wood framed buildings: confirmations from the 1994 Northridge earthquake. Canadian Journal of Civil Engineering. 22:403-414. 1995
- Separation between buildings to avoid pounding during earthquakes. Canadian Journal of Civil Engineering. 22:164-179. 1995
- Strong motion accelerograph records from the 1993 Napierville earthquake. Canadian Journal of Civil Engineering. 22:190-196. 1995
- Seismic Behavior of Steel-Fiber Reinforced Concrete Interior Beam-Column Joints. ACI Structural Journal. 92:543-552. 1995
- Seismic behavior of ductile concentrically steel x-bracings. Proc. 7th Canadian Conf. on Earthquake Eng.. 549-556. 1995
- Seismic shear demand of ductile cantilever walls: a Canadian code perspective. International Journal of Rock Mechanics and Minings Sciences. 32:A36-A36. 1995
- Pounding of buildings during earthquakes: a Canadian perspective. International Journal of Rock Mechanics and Minings Sciences. 31:253-253. 1994
- A rapid seismic screening procedure for existing bridges in Canada. Canadian Journal of Civil Engineering. 21:626-642. 1994
- Seismic shear demand of ductile cantilever walls: a Canadian code perspective. Canadian Journal of Civil Engineering. 21:363-376. 1994
- Pounding of buildings during earthquakes: a Canadian perspective. Canadian Journal of Civil Engineering. 21:251-265. 1994
- On the computation of seismic energy in inelastic structures. Engineering structures. 16:425-436. 1994
- Analyse des structures. Canadian Journal of Civil Engineering. 20:1081-1082. 1993
- Damage to Base of LNG Tanks from Blast Loading: Case Study. Journal of Performance of Constructed Facilities. 7:148-163. 1993
- Seismic Response Control of Buildings Using Friction Dampers. Earthquake Spectra. 9:447-466. 1993
- Damage to Cable‐Stayed Bridge during 1988 Saguenay Earthquake. I: Pseudostatic Analysis. Journal of Structural Engineering. 119:1432-1449. 1993
- Damage to Cable‐Stayed Bridge during 1988 Saguenay Earthquake. II: Dynamic Analysis. Journal of Structural Engineering. 119:1450-1463. 1993
- Discussion: Overview of seismic provision changes in National Building Code of Canada 1990. Canadian Journal of Civil Engineering. 20:334-339. 1993
- Influence of soft clays on the response spectra for structures in eastern Canada. Soil Dynamics and Earthquake Engineering. 12:469-477. 1993
- First Canadian University-Industry Workshop on Fibre Reinforced Concrete. Materials and Processing Report. 7:9-12. 1992
- Nonlinear earthquake response of structurally interconnected buildings. Canadian Journal of Civil Engineering. 19:560-572. 1992
- Effect of weak foundation on the seismic response of core wall type buildings. Canadian Journal of Civil Engineering. 19:530-539. 1992
- Closure to “Finite Strip Free-Vibration Analysis of Wood Floors” by A. Filiatrault, B. Folz, and R. O. Foschi (August, 1990, Vol. 116, No. 8) \textbar Request PDF. Journal of Structural Engineering. 118:1430-1431. 1992
- Discussion of “ Finite Strip Free‐Vibration Analysis of Wood Floors ” by A. Filiatrault, B. Folz, and R. O. Foschi (August, 1990, Vol. 116, No. 8). Journal of Structural Engineering. 118:1428-1430. 1992
- Seismic Evaluation of Modular Office Furniture System. Earthquake Spectra. 7:529-541. 1991
- Static and dynamic tests of timber shear walls fastened with nails and wood adhesive. Canadian Journal of Civil Engineering. 18:749-755. 1991
- Discussion on a paper by H. C. Tsai and J. M. Kelly. Earthquake Engineering and Structural Dynamics. 20:293-295. 1991
- Finite‐Strip Free‐Vibration Analysis of Wood Floors. Journal of Structural Engineering. 116:2127-2142. 1990
- Static and dynamic analysis of timber shear walls. Canadian Journal of Civil Engineering. 17:643-651. 1990
- Seismic Design Spectra for Friction‐Damped Structures. Journal of Structural Engineering. 116:1334-1355. 1990
- The Influence of Mexico City Soils on the Seismic Performance of Friction Damped and Base Isolated Structures. Earthquake Spectra. 6:335-352. 1990
- Analytical predictions of the seismic response of friction damped timber shear walls. Earthquake Engineering and Structural Dynamics. 19:259-273. 1990
- SESSION 43. FINITE ELENENT ANALYSIS II. Proceedings of the... International Modal Analysis Conference. 8. 1990
- Parameters influencing the design of friction damped structures. Canadian Journal of Civil Engineering. 16:753-766. 1989
- Efficient numerical modelling for the design of friction damped braced steel plane frames. Canadian Journal of Civil Engineering. 16:211-218. 1989
- Comparative performance of friction damped systems and base isolation systems for earthquake retrofit and aseismic design. Earthquake Engineering and Structural Dynamics. 16:389-416. 1988
- Performance Evaluation of Friction Damped Braced Steel Frames under Simulated Earthquake Loads. Earthquake Spectra. 3:57-78. 1987
- Experimentally Calibrated Numerical Modeling for Performance-Based Seismic Design of Low-Frequency Rocking Electrical Cabinets. Journal of Earthquake Engineering. ahead-of-print.
- SEISMIC PERFORMANCE OF CODE-DESIGNED FIBER-REINFORCED CONCRETE JOINTS. ACI Structural Journal. 91:564-571.
-
other
- (PDF) ENHANCING THE RESILIENCE OF ACUTE CARE FACILITIES: AN OVERVIEW OF MCEER RESEARCH
- (PDF) EQUIVALENT ELASTIC MODELING FOR THE DIRECT DISPLACEMENT-BASED SEISMIC DESIGN OF WOOD STRUCTURES
- (PDF) Experimental Behavior of Low-Rise Steel Buildings with Flexible Roof Diaphragms
- (PDF) Experimental investigation of progressive collapse of steel frames under multi-hazard extreme loading
- (PDF) Experimental study on the seismic behavior of nonstructural components subjected to full-scale floor motions
- (PDF) Full-Scale Experimental Facility and Loading Protocols for Seismic Performance Assessment of Nonstructural Systems
- (PDF) GENERATION OF VERTICAL ACCELERATIONS FOR SEISMIC SLIDING RESPONSE OF GRAVITY DAMS
- (PDF) PERFORMANCE DETERIORATION OF SLOTTED-BOLTED CONNECTION DUE TO BOLT IMPACT AND REMEDY BY RESTRAINERS
- (PDF) Quantification of Seismic Performance Factors for Buildings Incorporating Three-Dimensional Construction System
- (PDF) Reconnaissance report of the February 28, 2001 Nisqually (Seattle-Olympia) Earthquake
- (PDF) Seismic Design and Analysis of a Precast Segmental Concrete Bridge Model
- (PDF) Shake Table Testing of a Self-Centering Post-Tensioned Steel Frame
- (PDF) Symposium on Seismic Regulations and Challenges for Protecting Building Equipment, Components & Operations and University at Buffalo Nonstructural Components Simulator (UB-NCS) Dedication
- (PDF) Upgrade of first generation uniaxial seismic simulation system with second generation real-time three-variable digital control system
- APPLICATION OF THE SPECIFIC BARRIER MODEL TO THE SEISMIC FRAGILITY ASSESSMENT OF CRITICAL FACILITIES \textbar Request PDF
- Elements of Earthquake Engineering and Structural Dynamics - Second Edition \textbar Request PDF
- Elements of Earthquake Engineering and Structural Dynamics \textbar Request PDF
- Experimental investigation of the progressive collapse of a steel post-tensioned energy dissipating frame \textbar Request PDF
- Nonlinear analysis of hybrid sliding-rocking post-tensioned segmental bridges \textbar Request PDF
- Performance of timber buildings under seismic load. Part I: Experimental studies \textbar Request PDF
- Éléments de génie parasismique et de calcul dynamique des structures \textbar Request PDF