selected scholarly activity
-
chapters
- Properties and Applications of Ultrafine-Scaled Composites. 26-33. 2021
- The formation of pearlite in steels. 276-310. 2012
- 11 Work hardening in aluminium alloys. 307-344. 2011
- Work hardening in aluminium alloys. 307-344. 2011
- Steel-Based Composites: Driving Forces and Classifications. Annual Review of Materials Research. 213-241. 2010
- Ductility and Formability of Automotive Al Alloy Sheet. 113-122. 2000
- New Cryogenic Processing for the Development of High Strength Copper Wire for Magnet Applications. 89-96. 2000
- CHARACTERIZATION OF INTERFACES IN METAL-MATRIX COMPOSITES. 87-95. 1989
- Strain Hardening at Large Strains. 433-438. 1989
- Strengthening Mechanisms in Aluminum Alloys. 579-601. 1989
- The Effects of Pressure on the Fracture of Composite Materials. 41-41. 1989
- MICROMECHANISMS OF FRACTURE. 1-18. 1988
- The Influence of Spatial Distributions on Metallurgical Processes. 247-262. 1988
- Work Hardening at Large Strains, Theory and Experiment. 467-468. 1988
- TRANSMISSION AND SCANNING ELECTRON MICROSCOPY. 139-186. 1976
- Microstructural Development and Fracture Toughness of a Calcia Partially Stabilized Zirconia. 541-553. 1974
- Fracture in Laminated Materials. ASTM Special Technical Publication. 107-129. 1969
-
conferences
- Influence of Microstructural Length Scale on the Strength and Annealing Behavior of Pearlite, Bainite, and Martensite. Metallurgical and Materials Transactions A. 1454-1461. 2013
- Microtruss Cellular Nanocomposites. TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND INTERFACES. 337-344. 2012
- The bendability of AA1200/AA2124 laminate sheets produced via Fusion™ technology. Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. 669-674. 2011
- Bulk nanoscale materials in steel products. Journal of Physics: Conference Series. 012135-012135. 2010
- Fracture behaviour of Compositionally graded steels (CGS). 12th International Conference on Fracture 2009, ICF-12. 7250-7257. 2009
- Microstructural evolution and strain-hardening of Fe-30Mn during tensile deformation. Materials Science and Technology Conference and Exhibition 2009, MS and T'09. 1412-1422. 2009
- Shear Localization and Damage in AA5754 Aluminum Alloy Sheets. Journal of Materials Engineering and Performance. 395-401. 2008
- The mechanical response of compositionally graded materials. Materials Science & Engineering: A. 266-269. 2008
- The production of fine-scale microstructures by rapid annealing. Materials Science & Engineering: A. 258-261. 2008
- Analysis of forming limit diagram for aluminum bilayers. ADVANCES IN HETEROGENEOUS MATERIAL MECHANICS 2008. 436-439. 2008
- Microstructural Design for Advanced Structural Steels. Materials Science Forum. 42-50. 2007
- Delineating the Role of Second Phase Particles in AA6111. Materials Science Forum. 1913-1918. 2006
- Improved Multiple Ageing Treatments for AA6111. Materials Science Forum. 1499-1504. 2006
- Investigation on Mechanism of Ductile Fracture of AA5754 Sheet. Materials Science Forum. 985-990. 2006
- Modeling the Role of Microstructure on Shear Instability with Reference to the Formability of Automotive Aluminium Alloys. Materials Science Forum. 183-190. 2006
- The Work Hardening of Single Phase and Multi-Phase Aluminium Alloys. Materials Science Forum. 71-78. 2006
- Modeling damage linkage in heterogeneous alloys and metal matrix composites. 11th International Conference on Fracture 2005, ICF11. 4223-4228. 2005
- Rapid heat treatment of dual phase steels. Materials Science and Technology. 87-96. 2005
- Co-deformation of two-phase Cu–Cr alloys. Philosophical Magazine. 3137-3156. 2005
- Damage studies in heterogeneous aluminium alloys using X-ray tomography. Philosophical Magazine. 3191-3206. 2005
- The shearable–non-shearable transition in Al–Mg–Si–Cu precipitation hardening alloys: implications on the distribution of slip, work hardening and fracture. Philosophical Magazine. 3113-3135. 2005
- Local Strain Measurement in a Strip Cast Automotive Aluminum Alloy Sheet. SAE Technical Papers. 2005
- Multi-scale characterizations of shear localization in strip cast AA5754 aluminum alloy sheet. Materials Science and Technology. 249-258. 2004
- Strengthening via the formation of strain-induced martensite in stainless steels. Materials Science & Engineering: A. 873-881. 2004
- FABRICATION ROUTES FOR HIGH STRENGTH-HIGH CONDUCTIVITY WIRES. Megagauss Magnetic Field Generation, Its Application to Science and Ultra-High Pulsed-Power Technology. 158-160. 2004
- INTERNAL STRESSES IN WIRES FOR HIGH FIELD MAGNETS. Megagauss Magnetic Field Generation, Its Application to Science and Ultra-High Pulsed-Power Technology. 154-157. 2004
- Perspectives for Cu/SS macrocomposite and Cu/X nanofilamentary conductors used in non-destructive high-field pulsed magnets under cryogenic conditions. Physica B: Condensed Matter. 582-588. 2004
- A Novel Approach for the Prediction of Shear Localization in Sheet Forming. AIP Conference Proceedings. 838-843. 2004
- The effect of length scale on the plastic stability of nanolayered metals. SURFACES AND INTERFACES IN NANOSTRUCTURED MATERIALS AND TRENDS IN LIGA, MINIATURIZATION, AND NANOSCALE MATERIALS. 277-277. 2004
- The development of ultra high strength materials by microstructural refinement. THERMODYNAMICS, MICROSTRUCTURES AND PLASTICITY. 183-203. 2003
- Microstructures and Mechanical Properties of Nanostructured Copper-304 Stainless Steel Multilayers Synthesized by Magnetron Sputtering. Materials Research Society Symposium - Proceedings. 49-54. 2002
- The mechanical response of a dual phase steel. MECHANISMS AND MECHANICS OF FRACTURE: THE JOHN KNOTT SYMPOSIUM. 137-142. 2002
- Effect of Fe content on ductility and bendability of AA5754 and AA6111. TMS Annual Meeting. 166-174. 2001
- The mechanical properties of fine-scale two-phase materials. Materials Science & Engineering: A. 37-45. 2001
- Damage evolution in an AA6111/A1(2)O(3) composite. MATERIALS IN THE AUTOMOTIVE INDUSTRY. 411-422. 2001
- Effect of Fe content on ductility and bendability of AA5754 and AA6111. ALUMINUM 2001: PROCEEDINGS OF THE TMS 2001 ANNUAL MEETING ALUMINUM AUTOMOTIVE AND JOINING SYMPOSIA. 165-174. 2001
- Effect of superimposed pressure on the fracture behaviour of aluminum automotive alloys. ALUMINUM 2001: PROCEEDINGS OF THE TMS 2001 ANNUAL MEETING ALUMINUM AUTOMOTIVE AND JOINING SYMPOSIA. 17-29. 2001
- Microstructure of twin-belt strip cast AA5754 aluminum alloy for automotive applications. MATERIALS IN THE AUTOMOTIVE INDUSTRY. 123-134. 2001
- On the mechanical behaviour of aluminum automotive alloys under superimposed pressure. MATERIALS IN THE AUTOMOTIVE INDUSTRY. 397-410. 2001
- Development of high strength pure copper wires by cryogenic deformation for magnet applications. IEEE Transactions on Applied Superconductivity. 1284-1287. 2000
- Material issues in the 100 T non-destructive magnet. IEEE Transactions on Applied Superconductivity. 1277-1280. 2000
- An Overview of Plasticity in Nanoscale Composites. Materials Research Society Symposium - Proceedings. b1.1.1. 2000
- Characterization of Bendability in Automotive Aluminum Alloy Sheets. Materials Science Forum. 583-588. 2000
- Dislocation Models for Strengthening in Nanostructured Metallic Multilayers. Materials Research Society Symposium - Proceedings. b4.2.1. 2000
- Strengthening mechanisms in ultra-fine scale metallic multilayers. ULTRAFINE GRAINED MATERIALS. 299-308. 2000
- Approaching the theoretical strength in ductile copper. INTEGRATION OF MATERIAL, PROCESS AND PRODUCT DESIGN. 71-76. 1999
- Damage in Al alloys: Experiments and models. PROGRESS IN MECHANICAL BEHAVIOUR OF MATERIALS (ICM8), VOL 3. 1184-1185. 1999
- Dislocation accumulation at large plastic strains - An approach to the theoretical strength of materials.. PROGRESS IN MECHANICAL BEHAVIOUR OF MATERIALS (ICM8), VOL 2. 448-457. 1999
- Role of particle distribution on damage leading to ductile fracture. Microstructural Science. 491-496. 1999
- Structure and mechanical properties of Cu-X (X = Nb,Cr,Ni) nanolayered composites. Scripta Materialia. 555-560. 1998
- FCC to BCC transition in Fe/Pt multilayers. ELECTRON MICROSCOPY 1998, VOL 2. 361-362. 1998
- Microstructure of depleted uranium under uniaxial strain conditions. AIP Conference Proceedings. 423-426. 1998
- Plastic Behaviour of Cu / Ni Multilayers. Materials Research Society Symposium - Proceedings. 77-82. 1998
- Metallographic study of phosphorus segregation in interstitial free sheet steel. Mechanical Working and Steel Processing Conference Proceedings. 159-165. 1997
- Anomalous strain hardening behaviour of a supersaturated Al-Zn-Mg alloy. Materials Science & Engineering: A. 477-480. 1997
- The deformation of copper single crystals at 4.2 °K. Materials Science & Engineering: A. 1030-1032. 1997
- The effect of natural ageing on the evolution of yield strength during artificial ageing for Al-Mg-Si-Cu alloys. Materials Science & Engineering: A. 306-309. 1997
- The role of heterogeneity on the flow and fracture of two-phase materials. Materials Science & Engineering: A. 145-154. 1997
- Ductility of an Al-Cu alloy produced by the powder metallurgy route. EUROMAT 97 - PROCEEDINGS OF THE 5TH EUROPEAN CONFERENCE ON ADVANCED MATERIALS AND PROCESSES AND APPLICATIONS: MATERIALS, FUNCTIONALITY & DESIGN, VOL 1. 361-364. 1997
- Modelling of Damage in Particulate Metal Matrix Composites. Key Engineering Materials. 1167-1174. 1997
- The influence of microstructural scale on the combination of strength and electrical resistivity in copper based composites. Journal of the Mechanics and Physics of Solids. 737-750. 1996
- Influence of Strain Path and Initial Microstructure on the Work Hardening Behaviour of a Al-Mg-Mn Alloy. Materials Science Forum. 1227-1232. 1996
- Light weight cellular structures based on aluminium. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II. 19-28. 1996
- Strengthening Mechanisms in AL Alloys - an Overview of Natural Limits and Engineering Possibilities. Materials Science Forum. 57-70. 1996
- The Influence of Particulate Spatial Distribution on Damage Accumulation in Metals and Ceramics. IUTAM Bookseries. 271-278. 1996
- Electron microscopy of decagonal phases in Al-Cu-Co-Si system. PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON QUASICRYSTALS. 206-211. 1995
- Residual Stress, Mechanical Behavior and Electrical Properties of Cu/Nb Thin-Film Multilayers. Materials Research Society Symposium - Proceedings. 309-314. 1995
- THE PROPERTIES OF INTERFACES IN COMPOSITES. INTRINSIC AND EXTRINSIC FRACTURE MECHANISMS IN INORGANIC COMPOSITE SYSTEMS. 1-5. 1995
- Recommendations on modeling polyphase plasticity: conclusions of panel discussions. Materials Science & Engineering: A. 1-5. 1994
- Structural aspects of materials subjected to large strains. Materials Science & Engineering: A. 105-111. 1994
- ATTEMPTS TO MODEL THE GENERATION OF NEW GRAIN-BOUNDARIES DURING THE DEFORMATION OF POLYCRYSTALS. ADVANCES IN HOT DEFORMATION TEXTURES AND MICROSTRUCTURES. 459-468. 1994
- DISLOCATION MECHANISMS FOR TWINNING IN BCC AND FCC CRYSTALS. TWINNING IN ADVANCED MATERIALS. 69-73. 1994
- Large Strain Deformation of Al-Cu Solid Solutions Using Channel-Die Compression. Key Engineering Materials. 341-346. 1994
- MECHANICAL PROPERTIES OF A BINARY MAGNESIUM ALUMINUM ALLOY. RECENT DEVELOPMENTS IN LIGHT METALS. 375-375. 1994
- Phase transformation and layer evolution in molybdenum disilicide-silicon carbide nanolayered coatings. Microscopy and Microanalysis. 538-539. 1994
- SCALE-DEPENDENT COMPOSITE DESIGN CHARTS. RECENT DEVELOPMENTS IN LIGHT METALS. 47-47. 1994
- TWINNING STRESS IN FACE-CENTERED-CUBIC CRYSTALS. TWINNING IN ADVANCED MATERIALS. 331-336. 1994
- Damage and failure processes in structural materials. European Physical Journal: Special Topics. 607-619. 1993
- Diffraction studies of icosahedral phases in the AlFeW system. Journal of Non-Crystalline Solids. 63-67. 1993
- Damage failure processes in structural materials. European Physical Journal: Special Topics. 607-619. 1993
- The Mechanical Properties of Fine Scale Metallic Materials. MECHANICAL PROPERTIES AND DEFORMATION BEHAVIOR OF MATERIALS HAVING ULTRA-FINE MICROSTRUCTURES. 287-301. 1993
- The Structure and Mechanical Properties of Ru-Cu and Ru-Ti Nanolayer Composites. Materials Research Society Symposium - Proceedings. 747-752. 1993
- Room temperature microindentation of single-crystal MoSi2. Materials Science & Engineering: A. 251-258. 1992
- Ductile-to-Brittle Transition in MoSi2. Materials Research Society Symposium - Proceedings. 1099-1104. 1992
- The Behavior of Intermetallic Compounds at Large Plastic Strains. Materials Research Society Symposium - Proceedings. 585-590. 1992
- DAMAGE ACCUMULATION IN FRACTURE PROCESSES. MODELING THE DEFORMATION OF CRYSTALLINE SOLIDS. 439-456. 1991
- Wear mechanisms in particle reinforced and laminated metal matrix composites. Wear of Materials: International Conference on Wear of Materials. 159-166. 1991
- DAMAGE ACCUMULATION IN METAL-MATRIX COMPOSITES AND ITS ROLE IN HYDROSTATIC EXTRUSION. FABRICATION OF PARTICULATES REINFORCED METAL COMPOSITES. 187-193. 1990
- PROCESSING OF CERAMIC SUPERCONDUCTORS - REPORT OF A WORKSHOP. Journal of Metals. 42-42. 1988
- Influence of pressure on damage evolution and fracture in metal-matrix composites. Proceedings of the Riso International Symposium on Metallurgy and Materials Science. 517-526. 1988
- CHARACTERIZATION OF INTERFACES IN METAL-MATRIX COMPOSITES. CIM Bulletin. 69-69. 1988
- THE EFFECTS OF PRESSURE ON FRACTURE OF COMPOSITE-MATERIALS. CIM Bulletin. 61-61. 1988
- MODELING OF LARGE STRAIN WORK-HARDENING. Journal of Metals. A22-A22. 1987
- DAMAGE ACCUMULATION IN DUCTILE AND SHEAR FRACTURE PROCESSES. CIM Bulletin. 66-66. 1987
- THE ROLE OF CENTER-LINE SEGREGATION AND BANDED TRANSFORMATION PRODUCTS ON FRACTURE PROCESSES IN HSLA STEELS. CIM Bulletin. 83-83. 1986
- The Influence of Microstructure on Toughness. 1893-1915. 1986
- ANALYSIS OF INCLUSION DISTRIBUTION OF HSLA STEELS. CIM Bulletin. 87-87. 1985
- DENDRITIC GROWTH THROUGH MORPHOLOGICAL INSTABILITIES OF TITANIUM AND NIOBIUM CARBONITRIDES IN AUSTENITE. JOURNAL DE MICROSCOPIE ET DE SPECTROSCOPIE ELECTRONIQUES. A11-A11. 1985
- MICROSTRUCTURE AND FORMABILITY. CIM Bulletin. 87-87. 1985
- STATISTICAL ASPECTS OF MICROSTRUCTURAL CONTRIBUTIONS TO FRACTURE PROCESSES. Journal of Metals. A101-A101. 1985
- THE EFFECT OF INTERSTITIAL CONTENT ON THE EVOLUTION OF PRECIPITATES AND THE PROCESSING OF TITANIUM-NIOBIUM-BEARING HSLA STEEL SLABS. CIM Bulletin. 84-84. 1985
- EFFECT OF MICROALLOY ADDITIONS ON THE HEAT AFFECTED ZONE NOTCH TOUGHNESS OF A C-Mn-Mo LINE PIPE STEEL.. 881-896. 1984
- ASSESSMENT OF FRACTURE PROPERTIES IN HSLA STEEL CONTAINING TI AND NB. CIM Bulletin. 67-67. 1984
- DAMAGE ACCUMULATION DURING DUCTILE RUPTURE AND THE DEVELOPMENT OF FAILURE MAPS. 105-125. 1984
- DISPERSION HARDENING. Journal of Metals. 39-39. 1984
- STEM-MICROANALYSIS OF TI AND NB RICH CARBONITRIDES IN HSLA STEELS - EFFECT OF NIOBIUM. Annales Henri Poincare. 814-814. 1984
- STRUCTURAL STUDIES OF STRAIN LOCALIZATION. Journal of Metals. 44-44. 1984
- SURFACE-TREATMENT AND SURFACE-ANALYSIS. CIM Bulletin. 43-43. 1984
- FAILURE MAPS FOR DUCTILE FRACTURE PROCESSES. CIM Bulletin. 69-69. 1983
- MICROSTRUCTURAL FEATURES OF LARGE STRAIN DEFORMATION. Journal of Metals. A40-A40. 1983
- CHARACTERIZATION OF CARBONITRIDES IN Ti BEARING HSLA STEELS.. 267-292. 1982
- FORMABILITY OF ALUMINUM SHEET ALLOYS.. 549-582. 1982
- MICROCHEMISTRY OF CARBONITRIDES IN THE HAZ OF HSLA STEELS.. 136-146. 1982
- Ductile Fracture. 1089-1103. 1982
- THE EFFECT OF MICROSEGREGATION OF AUSTENITE GROWTH IN INTERCRITICALLY ANNEALED DUAL PHASE STEELS. Journal of Metals. A73-A73. 1982
- AUSTENITE GROWTH IN THE INTERCRITICAL ANNEALING OF TERNARY AND QUATERNARY DUAL-PHASE STEELS.. 59-83. 1981
- FORMABILITY OF DUAL-PHASE STEELS.. 333-345. 1981
- REPRESENTATION OF FRACTURE PROCESSES IN FRACTURE MAPS.. 52. 1981
- AUSTENITE GROWTH IN THE INTERCRITICAL ANNEALING OF FE-C-MN AND FE-C-MN-SI DUAL-PHASE STEELS. Journal of Metals. 9-9. 1980
- MECHANICAL METALLURGY OF DUAL-PHASE STEELS. Journal of Metals. 46-46. 1980
- FAILURE MAPS FOR SHEET MATERIALS. Engineering Fracture Mechanics. 458-458. 1979
- FRACTURE AND FORMABILITY IN STEELS. Engineering Fracture Mechanics. 470-470. 1979
- FRACTURE IN HSLA STEELS. Engineering Fracture Mechanics. 460-460. 1979
- FRACTURE PROPERTIES OF HIGH-STRENGTH LOW-ALLOY STEELS. Engineering Fracture Mechanics. 458-458. 1979
- MICROCRACKING IN CERAMICS. Engineering Fracture Mechanics. 457-457. 1979
- MODELS OF DUCTILE FAILURE. Engineering Fracture Mechanics. 457-457. 1979
- SHEAR FAILURE IN PRECIPITATION HARDENED ALUMINUM. Engineering Fracture Mechanics. 460-460. 1979
- Structural Aspects of Dynamic Recovery at Large Plastic Strains. Energy Technology Review. 511-516. 1979
- CRACK SHAPE STUDY IN A BRITTLE, NON-BONDED, PARTICULATE COMPOSITE. 941-948. 1978
- FAILURE MAPS APPLIED TO METAL DEFORMATION PROCESSES. 15-42. 1978
- CALCULATION OF TOUGHNESS PARAMETERS FROM SMALL-SCALE TESTS. CIM Bulletin. 132-132. 1977
- CRACK-PARTICLE INTERACTIONS IN BRITTLE COMPOSITES. AMERICAN CERAMIC SOCIETY BULLETIN. 302-302. 1977
- CUMULATIVE DAMAGE MODEL FOR DUCTILE FAILURE. CIM Bulletin. 144-144. 1977
- FRACTOGRAPHIC STUDIES. CIM Bulletin. 145-145. 1977
- STUDY OF BAUSCHINGER EFFECT IN SOME HSLA STEELS. CIM Bulletin. 132-132. 1977
- DIRECT OBSERVATION OF CRACK-PARTICLE INTERACTION IN BRITTLE COMPOSITES. AMERICAN CERAMIC SOCIETY BULLETIN. 395-395. 1976
- FRACTURE CRITERIA FOR HIGH-STRENGTH STRUCTURAL-STEELS. JOM. A58-A58. 1976
- BASIC MICROSTRUCTURAL ASPECTS OF ALUMINUM ALLOYS AND THEIR INFLUENCE ON FRACTURE BEHAVIOUR.. AGARD Conf Proc. 1975
- INITIATION AND GROWTH OF VOIDS AT SECOND PHASE PARTICLES.. Inst Met (London) Monogr Rep Ser. 164-169. 1973
- KINETICS OF FATIGUE SOFTENING IN LOW CARBON IRON.. Inst Met (London) Monogr Rep Ser. 412-416. 1973
- ON THE REVERSIBLE COMPONENT OF PLASTIC FLOW IN TWO-PHASE MATERIALS.. Inst Met (London) Monogr Rep Ser. 41-45. 1973
-
journal articles
- The design of “Grain Boundary Engineered” architected cellular materials: The role of 5-7 defects in hexagonal honeycombs. Acta Materialia. 243:118513-118513. 2023
- A novel approach to producing architectured ultra-high strength dual phase steels. Materials Science & Engineering: A. 833:142582-142582. 2022
- Novel approach for the development of tailored heterogenous structures in steel. Materialia. 13:100831-100831. 2020
- The effect of manganese on the microstructure and tensile response of an Al-Mg-Si alloy. Materials Science & Engineering: A. 755:307-317. 2019
- A tribute to Professor G.R. Purdy. Canadian Metallurgical Quarterly. 57:1-1. 2018
- On growth and form a metallurgical viewpoint. Canadian Metallurgical Quarterly. 57:38-45. 2018
- Using architectured materials to control localized shear fracture. Acta Materialia. 143:298-305. 2018
- On the rapid hardening and exhaustion of twinning in magnesium alloy. Acta Materialia. 122:369-377. 2017
- Effect of Rate Sensitivity on Structural Sandwich Plates with Sinusoidal Corrugated Cores. Advanced Engineering Materials. 18:1250-1258. 2016
- A β-titanium alloy with extra high strain-hardening rate: Design and mechanical properties. Scripta Materialia. 114:60-64. 2016
- Bending properties of functionally graded 300M steels. Materials Science & Engineering: A. 653:63-70. 2016
- Numerical study of surface roughening in blow-formed aluminum bottle with crystal plasticity. Materials Science & Engineering: A. 638:97-105. 2015
- New insights to the effects of ausforming on the bainitic transformation. Materials Science & Engineering: A. 626:34-40. 2015
- Failure analysis of fusion clad alloy system AA3003/AA6xxx sheet under bending. Materials Science & Engineering: A. 610:263-272. 2014
- Mechanical Behavior of Carbide-free Medium Carbon Bainitic Steels. Metallurgical and Materials Transactions A. 45:1352-1361. 2014
- Enhanced Formability in Sheet Metals Produced by Cladding a High Strain-Rate Sensitive Layer. Journal of Applied Mechanics, Transactions ASME. 81. 2014
- An Original Way for Producing a 2.4 GPa Strength Ductile Steel by Rolling of Martensite. ISIJ International. 54:235-239. 2014
- Development and characterisation of model TRIP steel microstructures. Materials Science & Engineering: A. 576:108-117. 2013
- Mechanical behavior of a compositionally graded 300M steel. Materials Science & Engineering: A. 578:140-149. 2013
- Preface. Ramanujan Journal. 31:1-2. 2013
- Microstructural Aspects of Damage and Fracture in AZ31 Sheet Materials. Journal of Materials Engineering and Performance. 22:1386-1395. 2013
- An extension of the Kocks–Mecking model of work hardening to include kinematic hardening and its application to solutes in ferrite. Philosophical Magazine. 93:247-255. 2013
- Architectured materials: Expanding materials space. Scripta Materialia. 68:1-3. 2013
- Foreword. Philosophical Magazine. 93:1-1. 2013
- Predicting Transient Softening in the Sub-Critical Heat-Affected Zone of Dual-Phase and Martensitic Steel Welds. ISIJ International. 53:110-118. 2013
- Design of an in situ mechanical test for spot-welded joints. Engineering Fracture Mechanics. 96:528-538. 2012
- Spatial and Temporal Characteristics of Propagating Deformation Bands in AA5182 Alloy at Room Temperature. Metallurgical and Materials Transactions A. 42:3358-3369. 2011
- Morphology and distribution of martensite in 301L alloy induced by different subsequent processes after prior deformation. Canadian Metallurgical Quarterly. 50:396-407. 2011
- A study of mechanical properties and microstructure in friction stir welded thin sheet aluminium alloys. Metallurgia Italiana. 103:5-12. 2011
- Mechanical Properties and Microstructural Evolution of Friction-Stir-Welded Thin Sheet Aluminum Alloys. Metallurgical and Materials Transactions A. 42:1283-1295. 2011
- Effect of chemical composition on work hardening of Fe—Mn—C TWIP steels. Materials Science and Technology. 27:707-709. 2011
- Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materials. MRS bulletin. 35:982-991. 2010
- Critical grain size for dislocation storage and consequences for strain hardening of nanocrystalline materials. Scripta Materialia. 63:477-479. 2010
- Deformation twinning as a strengthening mechanism in microtruss cellular materials. Scripta Materialia. 63:609-612. 2010
- Softening Kinetics in the Subcritical Heat-Affected Zone of Dual-Phase Steel Welds. Metallurgical and Materials Transactions A. 41:2348-2356. 2010
- Crystal plasticity based analysis of localized necking in aluminum tube under internal pressure. European Journal of Mechanics, A/Solids. 29:475-483. 2010
- Enhanced Ductility in Sheet Metals Produced by Cladding a Ductile Layer. Journal of Applied Mechanics, Transactions ASME. 77. 2010
- Microstructural features controlling the deformation and recrystallization behaviour Fe–30%Mn and Fe–30%Mn–0.5%C. Materials Science & Engineering: A. 527:3785-3791. 2010
- Enhanced ductility in round tensile bars produced by cladding a ductile ring. Modelling and Simulation in Materials Science and Engineering. 18:025005-025005. 2010
- Effects of superimposed hydrostatic pressure on fracture in sheet metals under tension. International Journal of Mechanical Sciences. 52:236-244. 2010
- Novel Thermal Processing of Dual Phase Steels: II – Work Hardening and Fracture Mechanisms. Canadian Metallurgical Quarterly. 49:91-97. 2010
- Compositionally Graded Steels: A Strategy for Materials Development. Advanced Engineering Materials. 11:992-999. 2009
- Effect of dynamic strain aging on fracture in aluminum alloy sheet materials AA5754. 12th International Conference on Fracture 2009, ICF-12. 8:5809-5818. 2009
- Effects of superimposed hydrostatic pressure on fracture in round bars under tension. International Journal of Solids and Structures. 46:3741-3749. 2009
- Effects of superimposed hydrostatic pressure on sheet metal formability. International journal of plasticity. 25:1711-1725. 2009
- Microstructural Design of Multiphase Advanced High Strength Steels. Canadian Metallurgical Quarterly. 48:237-245. 2009
- Microstructural evolution and strain hardening of Fe–24Mn and Fe–30Mn alloys during tensile deformation. Acta Materialia. 57:3978-3988. 2009
- Effect of surface finish on high temperature fatigue of a nickel based super alloy. International Journal of Fatigue. 31:743-750. 2009
- On the activation of recrystallization nucleation sites in Cu and Fe. Materials Science & Engineering: A. 502:70-78. 2009
- The strain induced martensite transformation in austenitic stainless steels: Part 1 – Influence of temperature and strain history. Materials Science and Technology. 25:7-17. 2009
- The strain induced martensite transformation in austenitic stainless steels: Part 2 – Effect of internal stresses on mechanical response. Materials Science and Technology. 25:18-28. 2009
- Compositionally graded steels: The effect of partial decarburization on the mechanical properties of spherodite and pearlite. Materials Science & Engineering: A. 491:80-87. 2008
- Constitutive Behavior of AA5754 Sheet Materials at Large Strains. Journal of engineering materials and technology. 130. 2008
- Transmission electron microscopy investigation of the atomic structure of interfaces in nanoscale Cu–Nb multilayers. Philosophical Magazine. 88:2559-2567. 2008
- Heterogeneous and Architectured Materials: A Possible Strategy for Design of Structural Materials. Advanced Engineering Materials. 10:24-36. 2008
- NOVEL THERMAL PROCESSING OF DUAL PHASE STEELS: I – MICROSTRUCTURAL DESIGN. Canadian Metallurgical Quarterly. 47:83-90. 2008
- Localised shear banding in Weldox steel plates impacted by projectiles. Mechanics of Materials. 39:865-880. 2007
- Digital image correlation studies for microscopic strain distribution and damage in dual phase steels. Scripta Materialia. 56:999-1002. 2007
- Effect of processing route on the spatial distributions of constituent particles and their role in the fracture process in AA5754 alloy sheet materials. Materials Science & Engineering: A. 456:85-92. 2007
- Structure–property optimization of ultrafine-grained dual-phase steels using a microstructure-based strain hardening model. Acta Materialia. 55:2337-2350. 2007
- Microstructure, indentation and work hardening of Cu/Ag multilayers. Philosophical Magazine. 86:5009-5016. 2006
- Role of internal stresses in co-deformed two-phase materials. Philosophical Magazine. 86:4081-4098. 2006
- Bainite tip radius prediction by analogy with indentation. Scripta Materialia. 54:1527-1529. 2006
- On the sequence of inhomogeneous deformation processes occurring during tensile deformation of strip cast AA5754. Acta Materialia. 54:209-218. 2006
- Effect of type-B Portevin–Le Chatelier bands on the onset of necking in uniaxial tension of strip cast AA5754 sheets. Scripta Materialia. 53:499-503. 2005
- Microscopic Strain Mapping Using Scanning Electron Microscopy Topography Image Correlation at Large Strain. Journal of Strain Analysis for Engineering Design. 40:559-570. 2005
- Diffraction based characterization of a directionally solidified Cu–Cr eutectic alloy. Journal of Crystal Growth. 276:321-331. 2005
- Prediction of shear localization during large deformation of a continuous cast Al–Mg sheet. Materials Science & Engineering: A. 394:192-203. 2005
- High strength and high electrical conductivity bulk Cu. Philosophical Magazine. 84:3705-3716. 2004
- A model for damage coalescence in heterogeneous multi-phase materials. Acta Materialia. 52:5255-5263. 2004
- Internal stresses in cold-deformed Cu–Ag and Cu–Nb wires. Philosophical Magazine. 84:2579-2593. 2004
- Damage accumulation and mechanical properties of particle-reinforced metal–matrix composites during hydrostatic extrusion. Composites Science And Technology. 64:1539-1549. 2004
- Electrodeposition of composite iron oxide–polyelectrolyte films. Materials Chemistry and Physics. 86:44-50. 2004
- Kinetics of grain boundary segregation during recrystallisation annealing. Materials Science and Technology. 20:891-896. 2004
- Dislocation mechanisms and symmetric slip in rolled nano-scale metallic multilayers. Acta Materialia. 52:2387-2394. 2004
- Established and Emerging Materials for use as High‐Field Magnet Conductors. Advanced Engineering Materials. 6:290-297. 2004
- Formation of misfit dislocations in nanoscale Ni–Cu bilayer films. Philosophical Magazine. 84:719-736. 2004
- Preface to the viewpoint set on: deformation and stability of nanoscale metallic multilayers. Scripta Materialia. 50:707-710. 2004
- Tensile properties and bendability of T4 treated AA6111 aluminum alloys. Materials Science & Engineering: A. 369:258-266. 2004
- Nanoscale-twinning-induced strengthening in austenitic stainless steel thin films. Applied Physics Letters. 84:1096-1098. 2004
- Electrochemical Preparation of Ni and Fe Hydroxide/Oxide Films Using Polyethylenimine. Surface Engineering. 20:5-10. 2004
- Enhanced hardening in Cu/330 stainless steel multilayers by nanoscale twinning. Acta Materialia. 52:995-1002. 2004
- The recrystallization of copper single crystals deformed at 4.2 K. Acta Materialia. 52:539-552. 2004
- Closing remarks. Philosophical Magazine. 84:503-503. 2004
- Precipitation strengthening of the aluminum alloy AA6111. Metallurgical and Materials Transactions A. 34:2913-2924. 2003
- The influence of precipitation on the work-hardening behavior of the aluminum alloys AA6111 and AA7030. Metallurgical and Materials Transactions A. 34:2473-2481. 2003
- The interaction of plasticity and diffusion controlled precipitation reactions. Scripta Materialia. 49:927-932. 2003
- Heterogeneous deformation of a two phase nickel – tungsten alloy. Materials Science and Technology. 19:1321-1329. 2003
- Hydrostatic Extrusion of Metal Matrix Composites. Journal of Composite Materials. 37:1589-1599. 2003
- Strengthening mechanisms in nanostructured copper/304 stainless steel multilayers. Journal of Materials Research. 18:1600-1606. 2003
- A structure investigation of epitaxial Fe–Pt multilayers. Philosophical Magazine. 82:1633-1650. 2002
- Tensile and bending properties of AA5754 aluminum alloys. Materials Science & Engineering: A. 316:52-59. 2001
- An analysis of microhardness of single-quasicrystals in the Al–Cu–Co–Si system. Materials Science & Engineering: A. 315:202-210. 2001
- The critical recrystallization strain of δ-Plutonium. Scripta Materialia. 44:2815-2820. 2001
- Deformation of copper single crystals to large strains at 4.2 K. Philosophical Magazine. 81:1143-1159. 2001
- Deformation of copper single crystals to large strains at 4.2K. Philosophical Magazine. 81:1121-1142. 2001
- Modeling the formation of twins and stacking faults in the ag-cu system. Acta Materialia. 49:1537-1540. 2001
- A Transmission Electron Microscope Study of Hardness Indentations in MoSi2. Journal of Materials Research. 15:1025-1032. 2000
- Kinetics of cold work embrittlement in rephosphorised, interstitial free steels. Materials Science and Technology. 16:9-12. 2000
- Erratum deformation mechanism maps for polycrystalline metallic multilayers. Scripta Materialia. 42:219-219. 1999
- Basic aspects of the co-deformation of bcc/fcc materials. Materials Science & Engineering: A. 272:90-98. 1999
- Deformation mechanism maps for polycrystalline metallic multiplayers. Scripta Materialia. 41:973-979. 1999
- Low-temperature dynamic precipitation in a supersaturated AI-Zn-Mg alloy and related strain hardening. Philosophical Magazine. 79:2485-2504. 1999
- A technique for rapid characterization of intermetallics and interfaces. Intermetallics. 7:1001-1009. 1999
- Study of the mechanical properties of Mg-7.7at.% Al byin-situneutron diffraction. Philosophical Magazine. 79:1671-1695. 1999
- The fabrication, properties and microstructure of Cu–Ag and Cu–Nb composite conductors. Materials Science & Engineering: A. 267:99-114. 1999
- Fracture toughness of diamondlike carbon coatings. Journal of Materials Research. 14:2173-2180. 1999
- A metallography solution for grain boundary diffusion estimation in polycrystals. Scripta Materialia. 40:821-824. 1999
- Internal stress measurements in a model Cu-sapphire composite. Scripta Materialia. 40:751-757. 1999
- Electrical resistivity of sputtered Cu/Cr multilayered thin films. Journal of Applied Physics. 85:302-309. 1999
- The interaction of twins and precipitates in a Mg-7.7 at.% Al alloy. Philosophical Magazine. 78:1137-1149. 1998
- Ductilization of a powder metallurgy Al-17 wt pct Cu by means of channel-die compression and extrusion. Metallurgical and Materials Transactions A. 29:2613-2620. 1998
- Microstructural aspects of Cu–Ag produced by the Taylor wire method. Acta Materialia. 46:4691-4699. 1998
- Conductor materials for high field magnets. Current Opinion in Solid State and Materials Science. 3:304-308. 1998
- Role of damage on the flow and fracture of particulate reinforced alloys and metal matrix composites. Acta Materialia. 45:5261-5274. 1997
- Observation of body centered cubic Cu in Cu/Nb nanolayered composites. Applied Physics Letters. 71:2103-2105. 1997
- Tensile instability in face-centred cubic materials. Philosophical Magazine. 76:743-752. 1997
- The transformation of slip dislocations during twinning of copper-aluminum alloy crystals. Revue de Metallurgie. Cahiers D'Informations Techniques. 94:1037-1044. 1997
- An approach to materials processing and selection for high-field magnet design. Acta Materialia. 45:1099-1104. 1997
- The nature of ion milling damage in MoSi 2. Philosophical Magazine Letters. 75:97-104. 1997
- High-strength, high-conductivity copper-steel composite. Materials Characterization. 37:239-243. 1996
- The stabilization of B.C.C. Cu in Cu/Nb nanolayered composites. Microscopy and Microanalysis. 54:228-229. 1996
- Summary. Journal of the Mechanics and Physics of Solids. 44:823-825. 1996
- A note on the deformation behaviour of two-dimensional model cellular structures. Philosophical Magazine. 73:739-751. 1996
- Study of large strain deformation of dilute solid solutions of Al-Cu using channel-die compression. Materials Science & Engineering: A. 207:143-152. 1996
- The Bauschinger effect in a particulate reinforced Al alloy. Materials Science & Engineering: A. 207:1-11. 1996
- On the stability of cold drawn, two-phase wires. Acta Materialia. 43:3313-3323. 1995
- Structure and properties of AlSiC foam. Materials Science & Engineering: A. 199:195-203. 1995
- THE PLASTICITY AND FRACTURE OF IN‐SITU COMPOSITES. Fatigue & Fracture of Engineering Materials & Structures (FFEMS). 18:747-753. 1995
- Structure and mechanical properties of MoSi2-Sic nanolayer composites. Philosophical Magazine. 71:759-779. 1995
- Deformation and Texture Evolution of a 3004 Aluminium Alloy During Ironing. Texture, Stress, and Microstructure. 25:1-15. 1995
- On dislocation storage and the mechanical response of fine scale microstructures.. Acta Materialia. 43:I-I. 1995
- Scale dependent composite design charts. Scripta Metallurgica et Materialia. 32:133-138. 1995
- LARGE-STRAIN DEFORMATION OF A COPPER TUNGSTEN COMPOSITE SYSTEM .1. STRAIN DISTRIBUTIONS (VOL 69, PG 645, 1994). Philosophical Magazine. 70:405-407. 1994
- On dislocation storage and the mechanical response of fine scale microstructures. Acta Materialia. 42:2051-2056. 1994
- Large strain deformation of a copper—tungsten composite system. I. Strain distributions. Philosophical Magazine. 69:645-665. 1994
- Large strain deformation of a copper—tungsten composite system. II. Applications. Philosophical Magazine. 69:667-687. 1994
- Investigations of High Strain Deformation Using Model Composite Systems. Solid State Phenomena. 35-36:217-232. 1993
- Microstructural Aspects of Materials for Nondestructive Long-Pulse High-Field Magnets. MRS bulletin. 18:57-60. 1993
- On plastic strain distribution and texture development in fiber composites. Acta Materialia. 41:1893-1905. 1993
- The mechanical behavior of directionally solidified Al-Ni in compression. Metallurgical and Materials Transactions A. 24:713-719. 1993
- A note on particle comminution at large plastic strains in Al-SiC composites. Scripta Metallurgica et Materialia. 28:47-51. 1993
- On Recrystallization in Metal Matrix Composites. Materials Science Forum. 113-115:551-556. 1993
- Some views on the influence of strain path on recrystallization. Scripta Metallurgica et Materialia. 27:1465-1470. 1992
- Micromechanical descriptions of heavily deformed materials. Scripta Metallurgica et Materialia. 27:981-986. 1992
- A note on the deformation of fine grained magnesium alloys. Scripta Metallurgica et Materialia. 27:139-142. 1992
- Synthesis and characterization of quasicrystals in an Al-Fe-W alloy. Scripta Metallurgica et Materialia. 27:111-116. 1992
- The deformation of CuW laminates. Materials Science & Engineering: A. 148:175-178. 1991
- Damage initiation in metal matrix composites. Acta Materialia. 39:1781-1786. 1991
- The role of subsurface deformation and strain localization on the sliding wear behaviour of laminated composites. Wear. 146:285-300. 1991
- The Influence of Pressure on Fracture of a Ti-V Plate Steel. Canadian Metallurgical Quarterly. 30:31-37. 1991
- Structure and property evolution during drawing and wall ironing of aluminum alloy 3004. Materials Characterization. 25:251-261. 1990
- On the analysis of delamination fractures in high-strength steels. Metallurgical and Materials Transactions A. 21:2565-2575. 1990
- Forming of low-ductility materials under hydrostatic pressure. Journal of Materials Shaping Technology. 8:77-81. 1990
- Sliding and abrasive wear behaviour of an aluminum (2014)-SiC particle reinforced composite. Scripta Metallurgica et Materialia. 24:931-935. 1990
- The mechanical properties of laminated microscale composites of Al/Al2O3. Journal of Materials Science. 25:1603-1609. 1990
- On the influence of hydrostatic pressure on the fracture of Ni3Al. Scripta Metallurgica. 23:1893-1897. 1989
- SOME APPLICATION OF ELECTRON-MICROSCOPY TO THE STUDY OF HIGH-STRENGTH MATERIALS. JOURNAL DE MICROSCOPIE ET DE SPECTROSCOPIE ELECTRONIQUES. 14:315-324. 1989
- On the development of a metallographic method to determine the strain distribution ahead of a crack tip. Metallography. 23:101-117. 1989
- On the Development of a Metallographic Method to Determine the Strain of Ferrite Phase in a HSLA Steel. Canadian Metallurgical Quarterly. 28:49-54. 1989
- Processing Ceramic Superconductors. JOM. 41:6-10. 1989
- The influence of hydrostatic pressure on the ductility of AlSiC composites. Materials Science & Engineering: A. 107:63-69. 1989
- The role of particle distribution in recrystallization in two-phase alloys. Materials Science & Engineering: A. 104:163-168. 1988
- Fracture mechanism maps in stress space. Acta Metallurgica. 36:1213-1228. 1988
- An investigation of crack blunting processes under plane strain conditions. Engineering Fracture Mechanics. 30:177-190. 1988
- Effect of specimen geometry on ductile initiation CTODi using a direct method. Engineering Fracture Mechanics. 31:349-356. 1988
- Flow localization in thin layers of amorphous alloys in laminated composite structures. Scripta Metallurgica. 22:265-270. 1988
- Recrystallization at shear bands in Al-Mg. Scripta Metallurgica. 22:99-103. 1988
- STRUCTURAL ASPECTS OF THE BAUSCHINGER EFFECT.. Materials Forum. 10:27-32. 1987
- Metallography of adhesive wear in aluminum alloys. Metallography. 20:99-112. 1987
- INFLUENCE OF MICROSTRUCTURAL FEATURES ON THE FORMABILITY OF ALUMINIUM ALLOYS.. Materials Forum. 9:188-201. 1986
- Microstructural aspects of strain localization in AlMg alloys. Acta Metallurgica. 34:1999-2009. 1986
- Plastic flow in dispersion hardened materials. Metallurgical and Materials Transactions A. 16:2191-2200. 1985
- Microanalysis of TiNb carbonitrides in HSLA steels. Metallography. 18:381-393. 1985
- Fracture maps with pressure as a variable. Scripta Metallurgica. 19:385-390. 1985
- The influence of dislocation density on the ductile-brittle transition in BCC metals. Scripta Metallurgica. 19:557-562. 1985
- On the development of a direct method of determining the microcrack resistance curve. Engineering Fracture Mechanics. 21:465-472. 1985
- Shear band formation in cold rolled Cu-6% Al single crystals. Acta Metallurgica. 32:1883-1894. 1984
- Analytical electron microscopy of aluminium alloys. Bulletin of Materials Science. 6:513-535. 1984
- A structural study of the influence of pressure on shear band formation. Acta Metallurgica. 32:511-519. 1984
- Instability of plastic flow and dynamic recrystallization in Cu single crystals. Metal Science. 18:216-222. 1984
- Metallographic techniques for the study of continuously cast microalloyed steels. Metallography. 16:287-297. 1983
- The influence of hydrostatic pressure on the flow stress and ductility of a spherodized 1045 steel. Acta Metallurgica. 31:1141-1150. 1983
- Reply. Journal of The American Ceramic Society. 65:c118-c118. 1982
- The Influence of Rolling Practice on Fracture Properties of Hot Rolled Plate. Canadian Metallurgical Quarterly. 21:299-308. 1982
- The assessment of the free surface strains and stresses during the upsetting of circular cylinders. Scripta Metallurgica. 16:697-701. 1982
- On the formation of high angle grain boundaries during the deformation of aluminum single crystals. Scripta Metallurgica. 16:493-497. 1982
- Formability of Dual-Phase Steels. JOM. 34:24-29. 1982
- A COMMENT ON THE RECRYSTALLIZATION BEHAVIOR OF AL-MG ALLOYS. Scandinavian Journal of Metallurgy. 11:51-54. 1982
- FORMABILITY OF DUAL-PHASE STEELS.. JOM. 34:24-29. 1982
- A model of ductile fracture based on the nucleation and growth of voids. Acta Metallurgica. 29:1509-1522. 1981
- Formability Maps. Annual Review of Materials Research. 11:505-521. 1981
- Growth of Austenite in the Intercritical Annealing of Fe-C-Mn Dual Phase Steels. Canadian Metallurgical Quarterly. 20:339-350. 1981
- The influence of microstructure on the formability and fracture of an aluminum-copper alloy (2036). Journal of Applied Metalworking. 1:24-33. 1981
- On dynamic and static ageing in substitutional and interstitial alloys. Scripta Metallurgica. 14:1349-1354. 1980
- Relationship of strain hardening and damage in ductile fracture. Metal Science. 14:337-343. 1980
- A Treatment of Inelastic Deformation Around a Crack Tip due to Microcracking. Journal of The American Ceramic Society. 63:404-410. 1980
- Deformation Twinning in Iron Alloys Containing Dispersed Particles. Canadian Metallurgical Quarterly. 19:229-243. 1980
- Bauschinger effect in structural steels and role in fabrication of line pipe: Part 1 analysis of Bauschinger effect in structural steels. Metals Technology. 7:359-367. 1980
- Bauschinger effect in structural steels and role in fabrication of line pipe: Part 2 empirical analysis of influence of Bauschinger effect in pipe-forming operation. Metals Technology. 7:368-371. 1980
- Fracture of a brittle particulate composite. Journal of Materials Science. 14:1657-1661. 1979
- Fracture of a brittle particulate composite. Journal of Materials Science. 14:1413-1420. 1979
- A study of the bauschinger effect in AlCu alloys. Acta Metallurgica. 27:903-914. 1979
- A simple method for the determination of values. Engineering Fracture Mechanics. 11:161-164. 1979
- MECHANICAL BEHAVIOR OF SOME DUAL PHASE STEELS - WITH EMPHASIS ON THE INITIAL WORK HARDENING RATE.. IEEE Conference Record of Annual Pulp and Paper Industry Technical Conference. 118-144. 1979
- THE INFLUENCE OF MICROSTRUCTURAL CHARACTERISTICS ON THE FORMABILITY OF AL-MG-SI ALLOYS. Metals Forum. 2:229-235. 1979
- On the description of deformation of large imposed plastic strains. IOP Conference Series: Materials Science and Engineering. 36:35-46. 1978
- The shape of creep curves. Scripta Metallurgica. 12:513-515. 1978
- Some comments on the dependence of the Bauschinger effect on prestrain. Scripta Metallurgica. 11:925-928. 1977
- The structure and properties of microduplex Zr-Nb alloys. Acta Metallurgica. 25:1191-1200. 1977
- Crack shape studies in brittle porous materials. Journal of Materials Science. 12:987-989. 1977
- Unstable shear failure in a 7075 aluminum alloy. Acta Metallurgica. 25:377-381. 1977
- Failure maps for sheet metal. Metals Technology. 4:153-159. 1977
- MECHANICAL-BEHAVIOR AND FRACTURE OF SOME HSLA STEELS .2. A DISCUSSION OF MODES OF FRACTURE OBSERVED DURING FORMING OF HSLA STEELS. Scandinavian Journal of Metallurgy. 6:289-292. 1977
- On the analysis of dislocation substructures in deformed and recovered niobium single crystals. Scripta Metallurgica. 10:901-903. 1976
- ChemInform Abstract: GROWTH AND STRUCTURE OF NICKEL OXIDE ON NICKEL CRYSTAL FACES. ChemInform. 7:no-no. 1976
- Laminage contrôlé des produits plats en acier ferritique aciculaire. Revue de Metallurgie. Cahiers D'Informations Techniques. 73:143-174. 1976
- CONTROLLED ROLLING OF SHEET PRODUCTS IN ACICULAR FERRITIC STEEL. Revue de Metallurgie. Cahiers D'Informations Techniques. 73:143-174. 1976
- Growth and Structure of Nickel Oxide on Nickel Crystal Faces. Journal of the Electrochemical Society. 122:1495-1503. 1975
- On the density of microcracks formed during the fracture of ceramics. Scripta Metallurgica. 9:907-909. 1975
- The Bauschinger effect in single phase b.c.c. materials. IOP Conference Series: Materials Science and Engineering. 19:147-149. 1975
- Some aspects of the fracture behaviour of high strength, low alloy steels. Canadian Metallurgical Quarterly. 14:69-83. 1975
- The intergranular fracture of AlMgSi alloys. IOP Conference Series: Materials Science and Engineering. 18:221-229. 1975
- The occurrence of delamination in a control rolled HSLA steel. Canadian Metallurgical Quarterly. 14:117-122. 1975
- The occurrence of delamination in a control rolled HSLA steel. Canadian Metallurgical Quarterly. 14:117-122. 1975
- INFLUENCE OF A FINE PARTICLE DISPERSION ON THE RECRYSTALLIZATION BEHAVIOUR OF A TWO PHASE ALUMINIUM ALLOY.. International Journal of Materials Research. 66:589-593. 1975
- ChemInform Abstract: FRACTURE TOUGHNESS OF A PARTIALLY STABILIZED ZRO2 IN THE SYSTEM CAO‐ZRO2. ChemInform. 5:no-no. 1974
- INFLUENCE OF THE CAST STRUCTURE ON THE RECRYSTALLIZATION BEHAVIOUR OF AN Al-Zn-Mg ALLOY.. Scandinavian Journal of Metallurgy. 3:69-74. 1974
- ON THE TENSILE FRACTURE OF ALUMINIUM ALLOYS.. International Journal of Materials Research. 65:45-55. 1974
- Fracture Toughness of a Partially Stabilized ZrO2 in the System CaO‐ZrO2. Journal of The American Ceramic Society. 56:619-623. 1973
- The influence of warm rolling on the fracture toughness of bainitic steels. Metallurgical and Materials Transactions B. 4:2051-2061. 1973
- FRACTURE BEHAVIOUR OF A MEDIUM STRENGTH Al-Zn-Mg ALLOY.. International Journal of Materials Research. 64:805-812. 1973
- Fracture of steels containing pearlite. Metallurgical and Materials Transactions B. 3:2797-2804. 1972
- A metallographic investigation of grain boundary sliding in a multiphase aluminum alloy. Metallography. 5:465-472. 1972
- ChemInform Abstract: INHOMOGENE DEHYDROXYLIERUNG VON TALK. ChemInform. 3:no-no. 1972
- The stability of microstructure in the iron-carbon system during cyclic deformation. Acta Metallurgica. 20:627-635. 1972
- The structure and properties of warm-rolled steels. Canadian Metallurgical Quarterly. 11:439-449. 1972
- Inhomogeneous Dehydroxylation of Talc. Journal of The American Ceramic Society. 55:149-151. 1972
- The influence of surface preparation on the structures of nickel oxide formed on the (100) face of nickel. HIGH TEMPERATURE CORROSION OF MATERIALS. 3:463-473. 1971
- Intergranular fracture in low carbon iron. Philosophical Magazine. 23:971-976. 1971
- Stress Relaxation Testing and the Determination of the Internal Stress. Physica Status Solidi (B): Basic Research. 43:393-399. 1971
- Dislocation dynamics in the copper-tin system. Philosophical Magazine. 22:1147-1160. 1970
- The accumulation of dislocations during the deformation of polycrystals. Acta Metallurgica. 18:1293-1299. 1970
- The solubility of γ′ in NiAl alloys. Scripta Metallurgica. 4:973-976. 1970
- The deformation of single crystals of the NiNi3Al system. Acta Metallurgica. 18:1217-1223. 1970
- Interpretation of SEM fracture surface detail using a sectioning technique. Metallography. 3:379-382. 1970
- The Role of Internal Stress in the High-Temperature Deformation of Copper. Metal Science J. 4:6-8. 1970
- On the Bailey-Orowan for steady state creep. Scripta Metallurgica. 3:821-825. 1969
- Fracture in quench-aged low-carbon steels. Canadian Metallurgical Quarterly. 8:51-58. 1969
- The Cyclic Hardening of Copper Single Crystals. Metal Science J. 3:147-152. 1969
- The Interaction of Glide Dislocations with Large Ordered Particles in a Ni‐Al Alloy. Physica Status Solidi (B): Basic Research. 35:K1-K3. 1969
- The role of structural defects in the growth of nickel oxide films. Acta Metallurgica. 16:1209-1218. 1968
- Instrumented Impact Testing of Low-Carbon Steels. Metal Science J. 2:194-200. 1968
- The relation between surface and interior structures in low-amplitude fatigue. Philosophical Magazine. 17:199-203. 1968
- The structure and properties of drawn pearlite. Acta Metallurgica. 14:147-159. 1966
- The nucleation of precipitates: The system Al-Zn-Mg. Acta Metallurgica. 13:403-417. 1965
- Dislocation sources in an aluminium alloy. Acta Metallurgica. 11:347-354. 1963
- The effect of quench deformation on the defect structure of quenched metals and alloys. Acta Metallurgica. 10:1118-1121. 1962
-
theses
- The Mechanical Properties of High-Strength, Low-Alloy Steels. Basic Life Sciences. 1977