selected scholarly activity
-
chapters
- Strain Hardening and Tensile Properties. 1-42. 2024
- Écrouissage et propriétés en traction. 13-52. 2022
- Steel-Based Composites: Driving Forces and Classifications. Annual Review of Materials Research. 213-241. 2010
-
conferences
- Comparison of Damage Evolution in Different Steels by Means of 3D X Ray Tomography. Steel Research International. 1197-1203. 2015
- Mechanism of ultra-fine microstructure formation during art-annealing of a Medium-Mn steel. PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. 1137-1144. 2015
- Influence of Microstructural Length Scale on the Strength and Annealing Behavior of Pearlite, Bainite, and Martensite. Metallurgical and Materials Transactions A. 1454-1461. 2013
- 3D synchrotron laminography assessment of damage evolution in blanked dual phase steels. 13th International Conference on Fracture 2013, ICF 2013. 1205-1212. 2013
- Characterization of microstructure formation and mechanical behavior of an advanced medium Mn steel. Materials Science and Technology Conference and Exhibition 2012, MS and T 2012. 1124-1131. 2012
- Characterization of microstructure formation and mechanical behavior of an advanced medium Mn steel. AIST Steel Properties and Applications Conference Proceedings - Combined with MS and T'12, Materials Science and Technology 2012. 327-336. 2012
- Beremin model: Methodology and application to the prediction of the Euro toughness data set. Engineering Fracture Mechanics. 102-117. 2012
- Bimodal Beremin-type model for brittle fracture of inhomogeneous ferritic steels: Theory and applications. Engineering Fracture Mechanics. 84-101. 2012
- Application of an Advanced GTN Model. Volume 1: Advanced Computational Mechanics; Advanced Simulation-Based Engineering Sciences; Virtual and Augmented Reality; Applied Solid Mechanics and Material Processing; Dynamical Systems and Control. 589-597. 2012
- Microtruss Cellular Nanocomposites. TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND INTERFACES. 337-344. 2012
- Analysis of particle induced dislocation structures using three-dimensional dislocation dynamics and strain gradient plasticity. Computational Materials Science. 33-39. 2012
- Effect of Intercritical Annealing Time on Microstructure and Mechanical Behavior of Advanced Medium Mn Steels. Materials Science Forum. 2693-2698. 2012
- Damage characterization in Dual-Phase steels using X-ray tomography. Conference Proceedings of the Society for Experimental Mechanics Series. 11-18. 2011
- Precipitation Sequence and Kinetics in an Fe-Si-Ti Alloy. Solid State Phenomena. 833-838. 2011
- Bulk nanoscale materials in steel products. Journal of Physics: Conference Series. 012135-012135. 2010
- Mechanical properties of low carbon steel hardened by the Fe2SiTi phase at high volume fraction. Journal of Physics: Conference Series. 012095-012095. 2010
- Shape optimization by the level-set method applied to architectured flexural panels. WIT Transactions on the Built Environment. 439-+. 2010
- Steel-Magnesium Composite Wire Obtained by Repeated Co-Extrusion. Materials Science Forum. 1263-1266. 2010
- Analysis of damage in metallic materials by X-ray tomography. 12th International Conference on Fracture 2009, ICF-12. 4471-4477. 2009
- Fracture behaviour of Compositionally graded steels (CGS). 12th International Conference on Fracture 2009, ICF-12. 7250-7257. 2009
- Microstructural evolution and strain-hardening of Fe-30Mn during tensile deformation. Materials Science and Technology Conference and Exhibition 2009, MS and T'09. 1412-1422. 2009
- Modelling plastic deformation of metals over a wide range of strain rates using irreversible thermodynamics. IOP Conference Series: Materials Science and Engineering. 012006-012006. 2009
- A new mean field micromechanical approach to capture grain size effects. Computational Materials Science. 604-610. 2009
- Design of Architectured Sandwich Core Materials using Topological Optimization Methods. Materials Research Society Symposium - Proceedings. 131-+. 2009
- Mechanical Properties of Sintered and Non Sintered Stainless Steel Wools: Experimental Investigation and Modeling. Materials Research Society Symposium - Proceedings. 55-+. 2009
- Strengthening by plastic corrugated reinforcements: an efficient way for strain-hardening improvement by architecture. Materials Research Society Symposium - Proceedings. 111-115. 2009
- Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe–Mn–C steel. Materials Science & Engineering: A. 184-187. 2008
- The mechanical response of compositionally graded materials. Materials Science & Engineering: A. 266-269. 2008
- Effect of Grain Refinement on the Mechanical Behaviour of Ferritic Steels: Evolution of Isotropic Hardening and Kinematic Hardening. Materials Science Forum. 605-609. 2008
- INVESTIGATIONS AND MODELLING OF THE WORK HARDENING OF AS-QUENCHED MARTENSITE. NEW DEVELOPMENTS ON METALLURGY AND APPLICATIONS OF HIGH STRENGTH STEELS: BUENOS AIRES 2008, VOLS 1 AND 2, PROCEEDINGS,. 909-918. 2008
- Mechanical Behavior of Non Sintered and Sintered Steel Wool. Advanced Materials Research. 121-124. 2008
- PREDICTING THE STRENGTH AND DUCTILITY OF ULTRAFINE GRAINED INTERSTITIAL FREE STEELS USING IRREVERSIBLE THERMODYNAMICS. NEW DEVELOPMENTS ON METALLURGY AND APPLICATIONS OF HIGH STRENGTH STEELS: BUENOS AIRES 2008, VOLS 1 AND 2, PROCEEDINGS,. 805-+. 2008
- A micromechanics-based elastic-viscoplastic model with non local effects due to geometrically necessary dislocations. AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications. 153-161. 2007
- Ensemble averaging stress–strain fields in polycrystalline aggregates with a constrained surface microstructure – Part 1: anisotropic elastic behaviour. Philosophical Magazine. 1401-1424. 2007
- Ensemble averaging stress–strain fields in polycrystalline aggregates with a constrained surface microstructure – Part 2: crystal plasticity. Philosophical Magazine. 1425-1446. 2007
- Experimental Analysis and Modelling of Fe-Mn-Al-C Duplex Steel Mechanical Behaviour. AIP Conference Proceedings. 76-81. 2007
- Microstructural Design for Advanced Structural Steels. Materials Science Forum. 42-50. 2007
- Phenomenological Analysis of the Kinematic Hardening of HSLA and IF Steels Using Reverse Simple Shear Tests. AIP Conference Proceedings. 100-105. 2007
- Dilatation measurements for the study of the α/γ transformation in pure iron in high magnetic fields. Journal of Physics: Conference Series. 541-544. 2006
- Study of the carbon distribution in multi-phase steels using the NanoSIMS 50. Applied Surface Science. 7051-7053. 2006
- Residual and Internal Stress States in Duplex Steel with TWIP Effect. Materials Science Forum. 833-838. 2006
- Simulation of Texture Development of Plane Carbon Steel in Multipass Rolling Using Analytical Flow Function. Materials Science Forum. 1603-1608. 2005
- A model for microstructure development in high strength steels. International Conference on Advanced High Strength Sheet Steels for Automotive Applications - Proceedings. 269-276. 2004
- A physical model of the twinning-induced plasticity effect in a high manganese austenitic steel. Materials Science & Engineering: A. 143-147. 2004
- Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe–Mn–C alloys. Materials Science & Engineering: A. 158-162. 2004
- Modeling of mechanical twinning in a high manganese content austenitic steel. Materials Science & Engineering: A. 272-276. 2004
- An Alternative Approach for Heterogeneous Material Behaviour Modelling. IUTAM Bookseries. 389-396. 2004
- ECAE of a stack of metal sheets. ULTRA-FINE STRUCTURED STEELS. 31-38. 2004
- Modelling of the mechanical properties of austenitic stainless steel coils processed on the Ugine&ALZ integrated cold rolling line LC2i. Revue de Metallurgie. Cahiers D'Informations Techniques. 325-332. 2003
- A Model for the Prediction of Microstructure and Mechanical Properties in Cold Rolled and Annealed TRIP Steels. Materials Science Forum. 3849-3854. 2003
- Flow Stress and Microstructure Modelling of Ferrite-Pearlite Steels during Cold Rolling. Materials Science Forum. 1399-1404. 2003
- The role of carbon on the kinetics of bainite transformation in steels. AUSTENITE FORMATION AND DECOMPOSITION. 15-25. 2003
- Mechanical behaviour of multiphase materials : an intermediate mixture law without fitting parameter. Revue de Metallurgie. Cahiers D'Informations Techniques. 71-77. 2002
- Modelling of TWIP effect on work-hardening. Materials Science & Engineering: A. 246-249. 2001
- Physical modelling of microstructure and mechanical properties of dual-phase steel. European Physical Journal: Special Topics. 223-231. 2001
- Physical modelling of microstructure and mechanical properties of dual-phase steel. European Physical Journal: Special Topics. 2001
- An international collaborative programme for evaluating modelling of hot isostatic pressing. HOT ISOSTATIC PRESSING, CONFERENCE PROCEEDINGS. 53-57. 1996
- Thermomechanical behaviour of an austenitic stainless steel powder during Hot Isostatic Pressing. HOT ISOSTATIC PRESSING, CONFERENCE PROCEEDINGS. 145-150. 1996
-
journal articles
- A Polymer-Based Metallurgical Route to Produce Aluminum Metal-Matrix Composite with High Strength and Ductility. Materials. 17:84-84. 2023
- A Constitutive Model of Tensile Deformation of a Metastable Medium-Entropy Alloy. Metallurgical and Materials Transactions A. 54:2519-2524. 2023
- Finite Element Modeling of Crumpling of Metallic Thin Foil. Advanced Engineering Materials. 25. 2023
- Corrugation Reinforced Architectured Materials by Direct Laser Hardening: A Study of Geometrically Induced Work Hardening in Steel. Steel Research International. 94. 2023
- A simple physics-based constitutive model to describe strain hardening in a wide strain range. International Journal of Material Forming. 16. 2023
- Bauschinger Effect or Kinematic Hardening: Bridging Microstructure and Continuum Mechanics. Metals and Materials International. 29:280-292. 2023
- Assessment of Phase Transformations in Binary Fe–Mn Alloys: Effects of Composition and of Plastic Strain. Metals and Materials International. 28:1537-1548. 2022
- Solid solution induced back-stress in multi-principal element alloys: Experiment and modeling. Materials Science & Engineering: A. 835:142621-142621. 2022
- Assessment of a physical based modelling suitable to capture the mechanical behaviour at large plastic strain of aluminium alloys. Metallurgical Research and Technology. 119:419-419. 2022
- Plastic energy-based analytical approach to predict the mechanical response of two-phase materials with application to dual-phase steels. European Journal of Mechanics, A/Solids. 91:104414-104414. 2022
- Twinning engineering of high-entropy alloys: An exercise in process optimization and modeling. Materials Science & Engineering: A. 822:141681-141681. 2021
- Twinning Engineering of a CoCrFeMnNi High-Entropy Alloy. Scripta Materialia. 197:113808-113808. 2021
- Isotropic and kinematic hardening of a high entropy alloy. Scripta Materialia. 191:107-110. 2021
- Sandwich materials with a crumpled aluminium core. Metallurgical Research and Technology. 118:320-320. 2021
- Increasing Necking Strain through Corrugation: Identifying Composite Systems That Can Benefit from Corrugated Geometry. Materials. 13:5175-5175. 2020
- Time-evolution of microstructure and mechanical behaviour of double annealed medium Mn steel. Materials Science and Technology. 35:2076-2083. 2019
- Microstructure-based behavior law for globular pearlitic steels. Journal of Materials Research and Technology. 8:3373-3376. 2019
- An original unified approach for the description of phase transformations in steel during cooling: first application to binary Fe–C. Metallurgical Research and Technology. 116:615-615. 2019
- Link between Microstructure and Mechanical Behavior of Double Annealed Medium Mn Steel. Materials Science Forum. 941:524-529. 2018
- Nano-twinned steel exhibits high mechanical properties obtained through ultra-rapid heat treatment. Materials Science & Engineering: A. 712:765-771. 2018
- Critical factors governing the thermal stability of austenite in an ultra-fined grained Medium-Mn steel. Philosophical Magazine Letters. 97:125-131. 2017
- Mechanism of Austenite Formation from Spheroidized Microstructure in an Intermediate Fe-0.1C-3.5Mn Steel. Metallurgical and Materials Transactions A. 47:3375-3386. 2016
- Influence of martensite volume fraction and hardness on the plastic behavior of dual-phase steels: Experiments and micromechanical modeling. International journal of plasticity. 80:187-203. 2016
- Low weight steel-magnesium composites achieved by powder compaction. Materials Science & Engineering: A. 660:77-83. 2016
- In situ 3D Synchrotron Laminography Assessment of Edge Fracture in Dual-Phase Steels: Quantitative and Numerical Analysis. Experimental mechanics. 56:177-195. 2016
- A Novel Strong and Ductile TWIP/Martensite Steel Composite. Advanced Engineering Materials. 18:56-59. 2016
- Bending properties of functionally graded 300M steels. Materials Science & Engineering: A. 653:63-70. 2016
- Light iron and hard magnesium nanocomposites. Materials Science & Engineering: A. 651:987-990. 2016
- Torsional and compressive behaviours of a hybrid material: Spiral fibre reinforced metal matrix composite. Materials and Design. 85:404-411. 2015
- Damage and fracture of dual-phase steels: Influence of martensite volume fraction. Materials Science & Engineering: A. 646:322-331. 2015
- Effect of viscosity on cavity growth in ductile damage. Mechanics of Materials. 89:169-175. 2015
- A microstructure based analytical model for tensile twinning in a rod textured Mg alloy. International journal of plasticity. 72:151-167. 2015
- Microstructure refinement of dual-phase steels with 3.5wt% Mn: Influence on plastic and fracture behavior. Materials Science & Engineering: A. 638:78-89. 2015
- Towards the microstructure design of DP steels: A generic size-sensitive mean-field mechanical model. Materials Science & Engineering: A. 637:222-234. 2015
- Avalanche dynamics in crumpled aluminum thin foils. Scripta Materialia. 99:17-20. 2015
- Synthesis of functionalized benzimidazole–butyrolactone dyads. Tetrahedron Letters. 56:1020-1024. 2015
- Analytical expressions of incompatibility stresses at Σ3⟨111⟩ twin boundaries and consequences on single-slip promotion parallel to twin plane. Philosophical Magazine. 95:12-31. 2015
- Characterization and modeling of mechanical behavior of quenching and partitioning steels. Materials Science & Engineering: A. 620:293-300. 2015
- Evolution of microstructure and strength during the ultra-fast tempering of Fe–Mn–C martensitic steels. Journal of Materials Science. 49:7782-7796. 2014
- Analytical Model of the Unbending Behavior of Corrugated Reinforcements. Advanced Engineering Materials. 16:872-877. 2014
- The influence of microstructure and composition on the plastic behaviour of dual-phase steels. Acta Materialia. 73:298-311. 2014
- Mechanical Behavior of Carbide-free Medium Carbon Bainitic Steels. Metallurgical and Materials Transactions A. 45:1352-1361. 2014
- The Bauschinger effect in drawn and annealed nanocomposite Cu–Nb wires. Materials Science & Engineering: A. 597:10-19. 2014
- An Original Way for Producing a 2.4 GPa Strength Ductile Steel by Rolling of Martensite. ISIJ International. 54:235-239. 2014
- Mechanical and structural characterization of nonsintered and sintered steel wools by x-ray tomography: Description of the techniques and validation on virtual materials. Journal of Materials Research. 28:2852-2860. 2013
- Benefits of Recovery and Partial Recrystallization of Nano‐Twinned Austenitic Steels. Advanced Engineering Materials. 15:976-979. 2013
- Driving Force and Logic of Development of Advanced High Strength Steels for Automotive Applications. Steel Research International. 84:937-947. 2013
- Experimental investigation of void coalescence in a dual phase steel using X-ray tomography. Acta Materialia. 61:6821-6829. 2013
- Damage evolution in TWIP and standard austenitic steel by means of 3D X ray tomography. Materials Science & Engineering: A. 579:92-98. 2013
- The effect of prior ferrite formation on bainite and martensite transformation kinetics in advanced high-strength steels. Acta Materialia. 61:6025-6036. 2013
- Mechanical behavior of a compositionally graded 300M steel. Materials Science & Engineering: A. 578:140-149. 2013
- Sandwich Panels with a Core Segmented into Topologically Interlocked Elements. Advanced Engineering Materials. 15:728-731. 2013
- Unambiguous carbon partitioning from martensite to austenite in Fe–C–Ni alloys during quenching and partitioning. Scripta Materialia. 68:1004-1007. 2013
- Architecturing of Metal‐Based Composites with Concurrent Nanostructuring: A New Paradigm of Materials Design. Advanced Engineering Materials. 15:336-340. 2013
- Compression of crumpled aluminum thin foils and comparison with other cellular materials. Materials Science & Engineering: A. 570:1-7. 2013
- Numerical investigation and experimental validation of physically based advanced GTN model for DP steels. Materials Science & Engineering: A. 569:1-12. 2013
- A novel eutectic Fe-15 wt.% Ti alloy with an ultrafine lamellar structure for high temperature applications. Intermetallics. 35:41-44. 2013
- An extension of the Kocks–Mecking model of work hardening to include kinematic hardening and its application to solutes in ferrite. Philosophical Magazine. 93:247-255. 2013
- Characterization and Modeling of Manganese Effect on Strength and Strain Hardening of Martensitic Carbon Steels. ISIJ International. 53:1076-1080. 2013
- Geometrically induced strain hardening. Scripta Materialia. 68:28-30. 2013
- Lattice strain measurements using synchrotron diffraction to calibrate a micromechanical modeling in a ferrite–cementite steel. Materials Science & Engineering: A. 561:67-77. 2013
- Characterization and Modeling of Precipitation Kinetics in a Fe-Si-Ti Alloy. Metallurgical and Materials Transactions A. 43:4999-5008. 2012
- Mechanical Properties of Monofilament Entangled Materials. Advanced Engineering Materials. 14:1128-1133. 2012
- Influence of severe plastic deformation on the precipitation hardening of a FeSiTi steel. Journal of Materials Science. 47:7939-7945. 2012
- Strain-Hardening in Nano-Structured Single Phase Steels: Mechanisms and Control. Journal of Nanoscience and Nanotechnology. 12:8732-8734. 2012
- Revisited Storage and Dynamic Recovery of Dislocation Density Evolution Law: Toward a Generalized Kocks–Mecking Model of Strain‐Hardening. Advanced Engineering Materials. 14:759-761. 2012
- Resolution effect on the study of ductile damage using synchrotron X-ray tomography. Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms. 284:15-18. 2012
- Extension of Ashby's Performance Indexes in Mixed Tension‐Bending Solicitations. Advanced Engineering Materials. 14:497-498. 2012
- Non-destructive 3-D reconstruction of the martensitic phase in a dual-phase steel using synchrotron holotomography. Scripta Materialia. 66:1077-1080. 2012
- Strain-hardening of twinning-induced plasticity steels. Scripta Materialia. 66:982-985. 2012
- Stress and strain gradients in high-pressure tube twisting. Scripta Materialia. 66:773-776. 2012
- Damage in dual phase steels and its constituents studied by X-ray tomography. International Journal of Fracture. 174:217-227. 2012
- Evolution of microstructure and mechanical properties of medium Mn steels during double annealing. Materials Science & Engineering: A. 542:31-39. 2012
- Recrystallization induced plasticity in austenite and ferrite. Materials Science & Engineering: A. 541:196-198. 2012
- Effect of Process Parameters on a Metallurgical Route Providing Nano‐Structured Single Phase Steel with High Work‐Hardening. Advanced Engineering Materials. 14:49-51. 2012
- Kinetics of bainite transformation in heterogeneous microstructures. Materials Letters. 67:187-189. 2012
- Toward a New Interpretation of the Mechanical Behaviour of As-quenched Low Alloyed Martensitic Steels. ISIJ International. 52:717-722. 2012
- Modelling the effect of carbon on deformation behaviour of twinning induced plasticity steels. Journal of Materials Science. 46:7410-7414. 2011
- Validation of void growth models using X-ray microtomography characterization of damage in dual phase steels. Acta Materialia. 59:7564-7573. 2011
- Modelling the strongest grain size in nanocrystalline FCC metals. Materials Letters. 65:3128-3130. 2011
- A finite element analysis of the bending and the bendability of metallic sheets. International Journal of Material Forming. 4:283-297. 2011
- High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships. Current Opinion in Solid State and Materials Science. 15:141-168. 2011
- Damage development in low alloy TRIP-aided steels during air-bending. Materials Science & Engineering: A. 528:5241-5250. 2011
- Design and characterization of a lamellar nanostructure in a low C steel. Journal of Materials Science. 46:2764-2770. 2011
- Relationship between relaxation mechanisms and strain aging in an austenitic FeMnC steel. Scripta Materialia. 64:741-744. 2011
- Effect of chemical composition on work hardening of Fe—Mn—C TWIP steels. Materials Science and Technology. 27:707-709. 2011
- Numerical modeling of damage evolution of DP steels on the basis of X-ray tomography measurements. Mechanics of Materials. 43:139-156. 2011
- An analytical description of the mechanical hysteresis of entangled materials during loading–unloading in uniaxial compression. Scripta Materialia. 64:107-109. 2011
- A quantitative modeling of the unloading behavior of metals during a tensile test. International Journal of Materials Research. 101:1497-1502. 2010
- A nanometre-sized porous phase in iron–carbon–boron system. Materials Letters. 64:2559-2561. 2010
- Characterization and modeling of void nucleation by interface decohesion in dual phase steels. Scripta Materialia. 63:973-976. 2010
- An approach to define the effective lath size controlling yield strength of bainite. Materials Science & Engineering: A. 527:6614-6619. 2010
- Critical grain size for dislocation storage and consequences for strain hardening of nanocrystalline materials. Scripta Materialia. 63:477-479. 2010
- Deformation twinning as a strengthening mechanism in microtruss cellular materials. Scripta Materialia. 63:609-612. 2010
- On particle size effects: An internal length mean field approach using field dislocation mechanics. Acta Materialia. 58:5532-5544. 2010
- Effect of pre-strain at elevated temperature on strain hardening of twinning-induced plasticity steels. Scripta Materialia. 62:713-715. 2010
- Thermally activated dislocation dynamics in austenitic FeMnC steels at low homologous temperature. Scripta Materialia. 62:500-503. 2010
- EBSD study of the substructure development with cold deformation of dual phase steel. Materials Science & Engineering: A. 527:947-953. 2010
- The “Ductilities” in Single Phase Steels from Usual to Nano-Scale Microstructures. Materials Science Forum. 633-634:205-210. 2010
- A New Technique for Severe Plastic Deformation: The Cone–Cone Method. Advanced Engineering Materials. 11:982-985. 2009
- Compositionally Graded Steels: A Strategy for Materials Development. Advanced Engineering Materials. 11:992-999. 2009
- Modelling the strength of ultrafine-grained and nanocrystalline fcc metals. Scripta Materialia. 61:1113-1116. 2009
- Effective strain rate sensitivity of two phase materials. Materials Science & Engineering: A. 524:186-192. 2009
- The “Ductilities” in Single Phase Steels from Usual to Nanoscale Microstructures. Advanced Engineering Materials. 11:767-770. 2009
- A constitutive model for high strain rate deformation in FCC metals based on irreversible thermodynamics. Mechanics of Materials. 41:982-988. 2009
- Predicting the stress–strain behaviour of carbon steels under hot working conditions: An irreversible thermodynamics model. Scripta Materialia. 61:648-651. 2009
- An improved physically based behaviour law for ferritic steels and its application to crash modelling. International Journal of Material Forming. 2:527-530. 2009
- Microstructural evolution and strain hardening of Fe–24Mn and Fe–30Mn alloys during tensile deformation. Acta Materialia. 57:3978-3988. 2009
- Modelling strength and ductility of ultrafine grained BCC and FCC alloys using irreversible thermodynamics. Materials Science and Technology. 25:833-839. 2009
- Modelling the steady state deformation stress under various deformation conditions using a single irreversible thermodynamics based formulation. Acta Materialia. 57:3431-3438. 2009
- Mechanisms and Modeling of Bake-Hardening Steels: Part II. Complex Loading Paths. Metallurgical and Materials Transactions A. 40:1375-1382. 2009
- On measurement of retained austenite in multiphase TRIP steels — results of blind round robin test involving six different techniques. Materials Science and Technology. 25:567-574. 2009
- Nanostructured steel with high work-hardening by the exploitation of the thermal stability of mechanically induced twins. Scripta Materialia. 60:714-716. 2009
- Physical relationship between mean-field micro-mechanical approach and Orowan looping in particle-strengthened materials. Scripta Materialia. 60:366-368. 2009
- A viscoplastic behavior law for ferritic steels at low homologous temperature. Revue de Metallurgie. Cahiers D'Informations Techniques. 106:80-89. 2009
- Severe plastic deformation of metals by high-pressure tube twisting. Scripta Materialia. 60:175-177. 2009
- Mechanical Properties of Sintered and Non Sintered Stainless Steel Wools: Experimental Investigation and Modelling. Materials Research Society Symposium - Proceedings. 1188:1188-ll02-05. 2009
- Microstructure based modeling for the mechanical behavior of ferrite–pearlite steels suitable to capture isotropic and kinematic hardening. Materials Science & Engineering: A. 496:329-336. 2008
- Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography. Acta Materialia. 56:4954-4964. 2008
- Compositionally graded steels: The effect of partial decarburization on the mechanical properties of spherodite and pearlite. Materials Science & Engineering: A. 491:80-87. 2008
- Irreversible thermodynamics modelling of plastic deformation of metals. Materials Science and Technology. 24:495-500. 2008
- Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels. Scripta Materialia. 58:484-487. 2008
- A model for initiation and growth of damage in dualphase steels identified by X-ray micro-tomography. Revue de Metallurgie. Cahiers D'Informations Techniques. 105:102-107. 2008
- Heterogeneous and Architectured Materials: A Possible Strategy for Design of Structural Materials. Advanced Engineering Materials. 10:24-36. 2008
- Severe plastic deformation by the cone-cone method: potential for producing ultrafine grained sheet material. Revue de Metallurgie. Cahiers D'Informations Techniques. 104:318-322. 2007
- Study of the effect of cold deformation on the austenite formation. Revue de Metallurgie. Cahiers D'Informations Techniques. 103:465-471. 2006
- Bainite tip radius prediction by analogy with indentation. Scripta Materialia. 54:1527-1529. 2006
- Influence of relative density on the architecture and mechanical behaviour of a steel metallic wool. Scripta Materialia. 54:1379-1383. 2006
- Ferrite Transformation in High Magnetic Field Monitored by in-situ Magnetic Measurements. ISIJ International. 46:1274-1276. 2006
- Cosserat continuum modelling of grain size effects in metal polycrystals. Proceedings in Applied Mathematics and Mechanics. 5:79-82. 2005
- Effect of a high magnetic field on the ferritic transformation in a low carbon steel. Revue de Metallurgie. Cahiers D'Informations Techniques. 102:393-397. 2005
- Iso‐work Increment Assumption for Heterogeneous Material Behaviour Modelling. Advanced Engineering Materials. 6:79-83. 2004
- Iso-work increment assumption for heterogeneous material behavior modelling. Advanced Engineering Materials. 6:79-83. 2004
- The Bainite Transformation Stage in the Processing of Trip-Aided Sheet Steels. Canadian Metallurgical Quarterly. 43:25-34. 2004
- A physically based model for TRIP-aided carbon steels behaviour. Materials Science & Engineering: A. 356:145-152. 2003
- Integrated Process-Metallurgy Modeling: Example of Precipitation During Coil Cooling. Iron and Steelmaker (I and SM). 30:33-39. 2003
- Bainite transformation stasis controlled by plastic work in austenite. Revue de Metallurgie. Cahiers D'Informations Techniques. 100:103-108. 2003
- Journées Sidérurgiques Internationales 2002 de l'ATS. Revue de Metallurgie. Cahiers D'Informations Techniques. 100:1-16. 2003
- Influence de la microstructure des aciers sur leur propriétés mécaniquesInfluence of steel microstructure on their mechanical properties. Mecanique et Industries. 3:457-462. 2002
- Constitutive model of the TWIP effect in a polycrystalline high manganese content austenitic steel. Steel Research. 73:299-302. 2002
- Microstructure and properties of not-fully recrystallized IF steels. Revue de Metallurgie. Cahiers D'Informations Techniques. 99:291-299. 2002
-
preprints
- A self-similar morphology detected in a composite produced by densification of co-crumpled metallic thin foils 2022
- An alternative strategy for the use of a low-cost age-hardenable Fe-Si-Ti steel for automotive application 2022
- Twinning Engineering of High-Entropy Alloys: An Exercise in Process Optimization and Modeling 2021
- Twinning Engineering of a CoCrFeMnNi High-Entropy Alloy 2021
- Isotropic and Kinematic Hardening of a High Entropy Alloy 2020
- Influence of severe plastic deformation on the precipitation hardening of a FeSiTi steel 2012
- An original way for producing a 2.5 GPa strength ductile steel by rolling of martensite 2012