selected scholarly activity
-
books
-
chapters
- Application of the Harmonic Analysis Technique to Determining Eddy Currents in Conducting Plates. 263-268. 1988
- Industrial Lan Using Distributed Microprocessors. Intelligent Systems, Control and Automation: Science and Engineering. 317-341. 1986
-
conferences
- A Maximum Power Point Tracker Control of a Photovoltaic System. Conference Record - IEEE Instrumentation and Measurement Technology Conference. 1074-1079. 2008
- Stabilizing of a Synthetic Loading Test Rig for Large Induction Machines. Conference Record - IEEE Instrumentation and Measurement Technology Conference. 2277-2282. 2006
- Error-Recovery Service for the IEEE 802.11b Protocol. IEEE Transactions on Instrumentation and Measurement. 1377-1382. 2006
- Stabilizing of a Synthetic Loading Test Rig for Large Induction Machines. Conference Record - IEEE Instrumentation and Measurement Technology Conference. 2277-+. 2006
- Error recovery service for the IEEE 802.11B protocol. Conference Record - IEEE Instrumentation and Measurement Technology Conference. 2316-2322. 2005
- Error Recovery Service for the IEEE 802.11B Protocol. 2005 IEEE Instrumentationand Measurement Technology Conference Proceedings. 2317-2322. 2005
- Error recovery service for IEEE 802.11B protocols via adaptive forward error correction and dynamic packet sizing. Canadian Conference on Electrical and Computer Engineering. 0337-0340. 2004
- Combining neural networks, fuzzy logic, and Kalman Filtering in an oil leak detector for underground electric power cables. Proceedings of the 21st IEEE Instrumentation and Measurement Technology Conference (IEEE Cat. No.04CH37510). 2099-2104 Vol.3. 2004
- Dynamic parameter identification of induction machines using spectral analysis and output error optimization. Proceedings of the 21st IEEE Instrumentation and Measurement Technology Conference (IEEE Cat. No.04CH37510). 2200-2203 Vol.3. 2004
- Error recovery service for IEEE 802.11b protocols via adaptive forward error correction and dynamic packet sizing. Canadian Conference on Electrical and Computer Engineering 2004 (IEEE Cat. No.04CH37513). 337-340 Vol.1. 2004
- Application of remote instrumentation to manufacturing. Conference Record - IEEE Instrumentation and Measurement Technology Conference. 1370-1375. 2003
- Automatic contingency grouping using partial least squares and feed forward neural network technologies applied to the static security assessment problem. Large Engineering Systems Conference on Power Engineering, 2003. 84-89. 2003
- Combining partial least squares and feed forward neural network technologies in a fault detection system with large number of correlated sensors. Conference Record - IEEE Instrumentation and Measurement Technology Conference. 829-834. 2002
- Hybrid architecture for remote instrumentation application. IMTC/2002. Proceedings of the 19th IEEE Instrumentation and Measurement Technology Conference (IEEE Cat. No.00CH37276). 813-816. 2002
- Hybrid architecture for remote instrumentation application. Conference Record - IEEE Instrumentation and Measurement Technology Conference. 813-816. 2002
- Using a Bayes classifier to optimize alarm generation to electric power generator stator overheating. 2002 IEEE International Symposium on Virtual and Intelligent Measurement Systems (IEEE Cat. No.02EX545). 140-145. 2002
- A novel method of measurement of synchronous machine losses using synthetic loading. Conference Record - IEEE Instrumentation and Measurement Technology Conference. 1948-1953. 2001
- Design and implementation of a calorimetric measurement facility for determining losses in electrical machines. Conference Record - IEEE Instrumentation and Measurement Technology Conference. 1785-1790. 2001
- Intelligent monitoring system used to control asynchronous production systems. VIMS 2001. 2001 IEEE International Workshop on Virtual and Intelligent Measurement Systems (IEEE Cat. No.01EX447). 35-40. 2001
- Shaft current in AC induction machine. An online monitoring system and prediction rules. IEEE Transactions on Industry Applications. 1189-1196. 2001
- Shaft current in AC induction machine: an on line monitoring system and prediction rules. Conference Record - IAS Annual Meeting (IEEE Industry Applications Society). 2822-2829. 2000
- Systematic practical approach to the study of bearing damage in a large oil-ring-lubricated induction machine. IEEE Transactions on Industry Applications. 1715-1724. 2000
- Significance of joints due to lamination segmentation on shaft current in induction machine. IEEE International Electric Machines and Drives Conference. IEMDC'99. Proceedings (Cat. No.99EX272). 487-489. 1999
- Systematic practical approach to the study of bearing damage in alarge oil ring lubricated induction machine. Record of Conference Papers - Annual Petroleum and Chemical Industry Conference. 185-194. 1999
- Dynamic parameter torque control of high speed sinusoidal flux permanent magnet synchronous machines. 1998 International Conference on Power Electronic Drives and Energy Systems for Industrial Growth, 1998. Proceedings.. 8-13 Vol.1. 1998
- A torque controlled high speed flywheel energy storage system for peak power transfer in electric vehicles. Conference Record - IAS Annual Meeting (IEEE Industry Applications Society). 435-442. 1994
- INVESTIGATION OF THE AIR-GAP INFLUENCE ON THE PERFORMANCE AND COST OPTIMIZATION OF A SQUIRREL-CAGE INDUCTION-MOTOR. IEE Conference Publication. 32-37. 1993
- Magnetic field analysis in squirrel cage induction motors. IEEE Transactions on Magnetics. 1367-1370. 1992
- Placement of vents to reduce shaft flux in two pole induction motors with a comment on heating effects. IEEE transactions on energy conversion. 483-490. 1992
- Propagation measurements at a G.M. manufacturing plant for wirelessLAN communication. [1992 Proceedings] The Third IEEE International Symposium on Personal, Indoor and Mobile Radio Communications. 334-338. 1992
- A NEW APPROACH FOR MEASUREMENT OF THE TORQUE-SPEED CHARACTERISTICS OF INDUCTION-MOTORS. FOURTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND DRIVES. 246-250. 1989
- Development of Parasitic Torques Leading to shaft Vibrations in Induction Machines. NATO Science Series E:. 347-361. 1988
- SYNCHRONOUS MOTOR IMPEDANCES MEASURED AT HARMONIC FREQUENCIES. IEEE Transactions on Power Apparatus and Systems. 14-14. 1980
- AMPERE MILE VECTOR THEORY APPLIED TO INDUCTIVE COORDINATION. IEEE Transactions on Power Apparatus and Systems. 1146-1146. 1979
-
journal articles
- Equivalent loading of induction motors using a new composite power supply with a linear (U/Hz) characteristic. International Transactions on Electrical Energy System. 16:603-627. 2006
- Interactive outcome-based assessment using multimedia. International Journal of Engineering Education. 20:141-151. 2004
- A new synthetic loading of induction machines based on phase modulation. International Transactions on Electrical Energy System. 13:315-320. 2003
- Using a bayes classifier to optimize alarm generation to electric power generator stator overheating. IEEE Transactions on Instrumentation and Measurement. 52:703-709. 2003
- A novel method of measurement of synchronous machine losses using synthetic loading. IEEE Transactions on Instrumentation and Measurement. 51:1228-1233. 2002
- Design and implementation of a calorimetric measurement facility for determining losses in electrical machines. IEEE Transactions on Instrumentation and Measurement. 51:902-907. 2002
- A new synthetic loading for large induction machines with no feedback into the power system. IEEE transactions on energy conversion. 17:319-324. 2002
- A New Synthetic Loading for Large Induction Machines with No Feedback into the Power System. IEEE Power Engineering Review. 22:49-49. 2002
- Determining Total Losses and Temperature Rise in Induction Motors Using Equivalent Loading Methods. IEEE Power Engineering Review. 21:55-56. 2001
- Determining total losses and temperature rise in induction motors using equivalent loading methods. IEEE transactions on energy conversion. 16:214-219. 2001
- On-Line Production Control of Tandem Systems with Finite Inter-Stage Storage, Using a Dynamic Maximum Cycle Time Algorithm. The International Journal of Advanced Manufacturing Technology. 16:147-154. 2000
- Dynamic motor parameter identification for high speed flux weakening operation of brushless permanent magnet synchronous machines. IEEE transactions on energy conversion. 14:486-492. 1999
- A novel representation of tandem systems with inter-stage storage applied to on-line system monitoring. The International Journal of Advanced Manufacturing Technology. 14:220-227. 1998
- Peak power bi-directional transfer from high speed flywheel to electrical regulated bus voltage system: a practical proposal for vehicular technology. IEEE transactions on energy conversion. 13:34-41. 1998
- Nonpolluting automobiles. IEEE Transactions on Vehicular Technology. 43:1136-1144. 1994
- Value engineering considerations in electrical drive systems for traction applications. Canadian Journal of Electrical and Computer Engineering. 18:81-86. 1993
- Communication aspect of parallel distributed algorithms on a cluster of workstations using the RPC. Proceedings of Canadian Conference on Electrical and Computer Engineering. 676-679 vol.2. 1993
- High-power cycloconverter drive for double-fed induction motors. IEEE transactions on industrial electronics (1982. Print). 39:230-240. 1992
- Horizontal demand prefetching: A novel approach to eliminating the jump problem. Canadian Journal of Electrical and Computer Engineering. 16:118-124. 1991
- Robot and PLC Support System Based on Fiber Optic Map Network. Intelligent Systems, Control and Automation: Science and Engineering. 335-351. 1991
- Synchronisation circuit for addition of two asynchronously changing digital values in digital motor control circuits. Electronics Letters. 27:1313-1313. 1991
- The Application of Double-Fed Motors for Traction Drives. EPE Journal (European Power Electronics and Drives Journal). 1:171-180. 1991
- Using horizontal prefetching to circumvent the jump problem. IEEE transactions on computers. 40:1287-1291. 1991
- Wide-range oscillator with digital control for digital waveform generation. Electronics Letters. 27:1780-1780. 1991
- A novel electromagnetic field shaper for pipe-type cable systems. IEEE Transactions on Power Delivery. 5:1-7. 1990
- COMPLETE 3 DIMENSIONAL ANALYSIS OF THE LEAKAGE-FLUX DENSITIES IN A TRANSFORMER. ETZ-Archiv. 12:3-8. 1990
- Measurement of the torque-speed characteristics of induction motors using an improved new digital approach. IEEE transactions on energy conversion. 5:565-571. 1990
- A three-dimensional electromagnetic field analysis technique utilizing the magnetic charge concept. IEEE Transactions on Magnetics. 23:3853-3859. 1987
- A New Approach to Determine Eddy Current Losses in the Tank Walls of a Power Transformer. IEEE Power Engineering Review. PER-7:60-60. 1987
- A New Approach to Determine Eddy Current Losses in the Tank Walls of a Power Transformer. IEEE Transactions on Power Delivery. 2:810-816. 1987
- A Flexible Hybrid-Firing Controller for Cycloconverter Drives. IEEE transactions on industrial electronics (1982. Print). IE-33:297-303. 1986
- Three Dimensional Flux Calculation on a Three-Phase Transformer. IEEE Power Engineering Review. PER-6:47-48. 1986
- Interactive Fortran for Power Engineering Education. IEEE Power Engineering Review. PER-6:45-46. 1986
- Microprocessor Adaptive Control of Oil Temperature for Robot Arm Valves: A Practical Implementation. IEEE transactions on industrial electronics (1982. Print). IE-33:21-27. 1986
- Interactive Fortran for Power Engineering Education. IEEE Transactions on Power Systems. 1:160-166. 1986
- Three Dimensional Flux Calculation on a Three-Phase, Transformer. IEEE Transactions on Power Delivery. 1:156-160. 1986
- Characterization of the electromagnetic environment with the installation of industrial rectifiers. Canadian Electrical Engineering Journal. 10:90-95. 1985
- On the Interaction Between Power System Configuration and Industrial Rectifier Harmonic Interference: A Practical Case Study. IEEE Power Engineering Review. PER-2:50-50. 1982
- On the Interaction Between Power System Configuration and Industrial Rectifier Harmonic Interference: A Practical Case Study. IEEE Transactions on Power Apparatus and Systems. PAS-101:2762-2769. 1982
- Harmonic Impedance Measurements on Transformers. IEEE Power Engineering Review. PER-1:49-49. 1981
- Harmonic Impedance Measurements on Transformers. IEEE Transactions on Power Apparatus and Systems. PAS-100:5020-5026. 1981
- Pulsewidth Modulation Inverter Drive with Fast Response to Frequency and Amplitude Controls. IEEE Transactions on Industrial Electronics and Control Instrumentation. IECI-28:252-255. 1981
- Optimum distribution feeder balancing using the ampere-mile vector theory. Canadian Electrical Engineering Journal. 6:21-26. 1981
- Dynamic Performance of a Frequency Controller. IEEE Transactions on Communications. 28:1762-1766. 1980
- A Programmable Firing Controller. IEEE Transactions on Industrial Electronics and Control Instrumentation. IECI-27:242-246. 1980
- Harmonic interference corrected by shunt capacitors on distribution feeders. IEEE Transactions on Power Apparatus and Systems. 96:234-239. 1977
- On-Line Phase Measurement of Power System Harmonics. IEEE Transactions on Instrumentation and Measurement. 26:170-175. 1977
- Optimizing shunt capacitor installations using inductive co-ordination principles. IEEE Transactions on Power Apparatus and Systems. 96:222-226. 1977
- Circle diagram of induction machines from practical test results. Canadian Electrical Engineering Journal. 1:27-32. 1976
- Digital Measurement of Angular Velocity for Instrumentation and Control. IEEE Transactions on Industrial Electronics and Control Instrumentation. IECI-23:83-86. 1976
- A Load Insensitive Chopper. IEEE Transactions on Industrial Electronics and Control Instrumentation. IECI-22:31-34. 1975
- Modeling of DC Motors for Control Applications. IEEE Transactions on Industrial Electronics and Control Instrumentation. IECI-21:84-88. 1974
- Digital measurement of angular velocity. Measurement Science and Technology. 6:549-552. 1973
- A Time-Optimal Digital Position Controller Using a Permanent-Magnet DC Servomotor. IEEE Transactions on Industrial Electronics and Control Instrumentation. IECI-19:74-77. 1972
- Practical Switching Characteristics for Minimum-Time Position Control Using a Permanent-Magnet Motor. IEEE Transactions on Industrial Electronics and Control Instrumentation. IECI-19:69-73. 1972
- A new digital instrument for measuring angular velocity and acceleration. Proceedings of the IEEE. 60:455-456. 1972
- High-Resolution Precision Digital Tachometer. IEEE Transactions on Instrumentation and Measurement. 21:144-148. 1972
- Dynamic Measurements of the Main Electrical Parameters of a Dc Machine. IEEE Transactions on Industry & Gen Applications. IGA-7:109-115. 1971
- New high-precision digital tachometer. Electronics Letters. 7:174-176. 1971
- Computer Based Motor Parameter Determination for High Speed Operation of Permanent Magnet Synchronous Machines
- Shaft current phenomenon: Experimental testing and analysis of a large induction motor
-
other
-
theses