From theory to observation: understanding filamentary flows in high-mass star-forming clusters

Here we use data from multi-scale galactic MHD simulations to observe filaments and star forming clumps on 10's of pc scales and investigate flow rate relationships along, and onto filaments as well as flows towards the clumps. Using the FilFinderPPV identification technique, we identify the prominent filamentary structures in each data cube. Each filament and its corresponding clump are analysed by calculating flow rates along each filament towards the clump, onto each filament from increasing distances, and radially around each clump. This analysis is conducted for two cubes, one feedback dominated region, and one with less feedback. Looking at the face-on inclination of the simulations (0 degrees), we observe different trends depending on the environmental conditions (more or less feedback). The median flow rate in the region with more feedback is 8.9$\times$10$^{-5}$ M$_{sun}\mathrm{yr}^{-1}$ and we see that flow rates along the filaments toward the clumps generally decrease in these regions. In the region with less feedback we have a median flow rate of 2.9$\times$10$^{-4}$ M$_{sun}\mathrm{yr}^{-1}$ and when looking along the filaments here we see the values either increase or remain constant. We find that the flow rates from the environments onto the primary filaments are of an order of magnitude sufficient to sustain the flow rates along these filaments. When discussing the effects of galactic and filamentary inclination, we also observe that viewing the filaments from different galactic inclinations can reveal the presence of feeder structures (smaller filamentary structures aiding in the flow of material). The method used to estimate these flow rates, which has been previously applied to observational data, produced results consistent with those obtained from the simulations themselves, providing high confidence in the flow rate calculation method.