selected scholarly activity
-
chapters
- Drilling of Fibre Reinforced Polymers and Hybrid Stacked Materials. Engineering Materials. 253-284. 2021
- High speed machining processes for fiber-reinforced composites. 333-364. 2012
-
conferences
- On the performance of cryogenic technology in milling of hardened H13 tool steel.. Procedia CIRP. 384-389. 2024
- Real-time Tool Prefailure Detection in Conventional and High-Speed Milling Applications. Procedia CIRP. 448-453. 2023
- Characterization of Machinability and Environmental Impact of Cryogenic Turning of Ti-6Al-4V. Procedia CIRP. 893-898. 2018
- Investigation of drilling of CFRP-aluminum stack under different cooling modes. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). 2016
- Tool pre-failure monitoring in intermittent cutting operations. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE). 2016
- Optimization of cutting conditions in vibration assisted drilling of composites via a multi-objective EGO implementation. Proceedings of the ASME Design Engineering Technical Conference. 2015
- Effect of Tool Kinematics on the Drilling Forces and Temperature in Low Frequency High Amplitude Vibration Assisted Drilling. Volume 2A: Advanced Manufacturing. 2014
- Experimental Characterization and Multi-Objective Optimization of the Orbital Drilling Process of CFRP. Volume 2B: Advanced Manufacturing. 2013
- Rectification of Piezoelectric Dynamometer Force Signals During Low Frequency Vibration Assisted Drilling. Volume 2B: Advanced Manufacturing. 2013
- Experimental optimization of orbital drilling of woven carbon fiber reinforced epoxy laminates. ICCM International Conferences on Composite Materials. 3410-3419. 2013
- High Speed Routing of Woven Carbon Fiber Reinforced Epoxy Laminates. Volume 3: Design, Materials and Manufacturing, Parts A, B, and C. 2061-2066. 2012
- Controlling the Processing Parameters for Consolidation of Nanopowders into Bulk Nanostructured Material. Ceramic Transactions. 11-22. 2009
- Nanocrystalline Powder Consolidation in AA2124 using Uniaxial Compaction and Severe Plastic Deformation. TMS 2009 138TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND PROPERTIES. 495-+. 2009
- Construction of consolidation maps of pre-ECAE hot compact nanocrystalline-micron powders. PROCEEDINGS OF THE ASME 2ND MULTIFUNCTIONAL NANOCOMPOSITES AND NANOMATERIALS CONFERENCE 2008. 39-46. 2008
-
journal articles
- Corrigendum to ’In-situ Elastic Calibration of Robots: Minimally-Invasive Technology, Cover-Based Pose Search and Aerospace Case Studies’, Robotics and Computer-Integrated Manufacturing 89 (2024), 102743. (Robotics and Computer-Integrated Manufacturing (2024) 89, (S0736584524000292), (10.1016/j.rcim.2024.102743)). Robotics and Computer-Integrated Manufacturing. 89:102773. 2024
- In-situ elastic calibration of robots: Minimally-invasive technology, cover-based pose search and aerospace case studies. Robotics and Computer-Integrated Manufacturing. 89:102743. 2024
- Physics based models for characterization of machining performance – A critical review. CIRP - Journal of Manufacturing Science and Technology. 51:161-189. 2024
- Sensors for in-process and on-machine monitoring of machining operations. CIRP - Journal of Manufacturing Science and Technology. 51:263-292. 2024
- Monitoring Variability in Melt Pool Spatiotemporal Dynamics (VIMPS): Towards Proactive Humping Detection in Additive Manufacturing. Journal of Manufacturing and Materials Processing. 8:114-114. 2024
- Cyber–Physical Systems for High-Performance Machining of Difficult to Cut Materials in I5.0 Era—A Review. Sensors. 24:2324-2324. 2024
- In-process self-configuring approach to develop intelligent tool condition monitoring systems. CIRP annals. 73:81-84. 2024
- Empirical modeling of force and temperature in drilling bone-simulating hybrid composites. Journal of Composite Materials. 57:2789-2808. 2023
- A Real-Time Deep Machine Learning Approach for Sudden Tool Failure Prediction and Prevention in Machining Processes. Sensors. 23:3894-3894. 2023
- Advantages of water droplet machining over abrasive waterjet cutting of carbon fiber reinforced polymer. Manufacturing Letters. 33:342-348. 2022
- Intelligent Cyber-Physical Monitoring and Control of I4.0 Machining Systems - An Overview and Future Perspectives. Journal of Machine Engineering. 22:5-24. 2022
- The Effect of MQL on Tool Wear Progression in Low-Frequency Vibration-Assisted Drilling of CFRP/Ti6Al4V Stack Material. Journal of Manufacturing and Materials Processing. 5:50-50. 2021
- Novel sensor-based tool wear monitoring approach for seamless implementation in high speed milling applications. CIRP annals. 70:87-90. 2021
- A smart tool wear prediction model in drilling of woven composites. The International Journal of Advanced Manufacturing Technology. 110:2881-2892. 2020
- A new cyber-physical adaptive control system for drilling of hybrid stacks. CIRP annals. 69:105-108. 2020
- Effect of process parameters on chip formation during vibration-assisted drilling of Ti6Al4V. The International Journal of Advanced Manufacturing Technology. 106:1105-1119. 2020
- Elimination of delamination and burr formation using high-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material. The International Journal of Advanced Manufacturing Technology. 105:859-873. 2019
- An Investigation into Tool Wear and Hole Quality during Low-Frequency Vibration-Assisted Drilling of CFRP/Ti6Al4V Stack. Journal of Manufacturing and Materials Processing. 3:63-63. 2019
- Surface and microstructure characterization of low-frequency vibration-assisted drilling of Ti6Al4V. The International Journal of Advanced Manufacturing Technology. 103:1443-1457. 2019
- Chip Morphology and Delamination Characterization for Vibration-Assisted Drilling of Carbon Fiber-Reinforced Polymer. Journal of Manufacturing and Materials Processing. 3:23-23. 2019
- A Generalized Multisensor Real-Time Tool Condition–Monitoring Approach Using Deep Recurrent Neural Network. Smart and Sustainable Manufacturing Systems. 3:20190020-20190020. 2019
- Low-frequency vibration-assisted drilling of hybrid CFRP/Ti6Al4V stacked material. The International Journal of Advanced Manufacturing Technology. 98:2801-2817. 2018
- INTELLIGENT MACHINING: REAL-TIME TOOL CONDITION MONITORING AND INTELLIGENT ADAPTIVE CONTROL SYSTEMS. Journal of Machine Engineering. Vol.18:5-18. 2018
- A Novel Generalized Approach for Real-Time Tool Condition Monitoring. Journal of Manufacturing Science and Engineering. 140. 2018
- A novel approach for real-time prediction and prevention of tool chipping in intermittent turning machining. CIRP annals. 67:41-44. 2018
- Prediction and control of drilling-induced damage in fibre-reinforced polymers using a new hybrid force and temperature modelling approach. CIRP annals. 64:89-92. 2015
- High-speed drilling of thick woven carbon fiber reinforced epoxy laminates. Canadian Aeronautics and Space Journal. 60:90-97. 2014
- Characterization and optimization of vibration-assisted drilling of fibre reinforced epoxy laminates. CIRP annals. 62:91-94. 2013
- Characterization and optimization of orbital drilling of woven carbon fiber reinforced epoxy laminates. CIRP annals. 61:123-126. 2012
- Fabrication of High Performance PM Nanocrystalline Bulk AA2124. Journal of Materials Engineering and Performance. 19:356-367. 2010
-
preprints