Fast Method for Testing the Photocatalytic Performance of Modified Gypsum

The measurement of the photocatalytic activity of building materials is quite time-consuming. Up until now, researchers have mainly used the equipment described in ISO 22197-1 to ISO 22197-4 for the determination of air purification activity, although other apparatus such as colorimeters, UV-Vis/DR spectroscopes and equipment for contact angle measurements have also been used. Usually, photocatalytic activity measurements take from one hour up to several hours. In this study, we present a very fast method for the measurement of the photocatalytic activity of gypsum. A specially designed printer with a modified bubblejet cartridge was used to apply a special ink on the surface of gypsum plates. Then the surface was irradiated by UV-A light and every 3 s a picture of the surface was taken. The results showed that the discoloration of the dye occurs after a few seconds of irradiation and the time depends on the amount of photocatalyst used as well as the number of printed ink layers. It was concluded that it is possible to use this method for a quick comparison of the photocatalytic activity of different types of modified gypsum materials.